Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

SHIELD HEAT

Awarded
SPE4A1-26-T-2741Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A1-26-T-2741, issued by DLA Aviation under the Aviation Supply Chain, is a request for quotations for the procurement of eight units of a critical application item, specifically RTX Corporation 55820 part number 4501093 (NSN 2935-01-644-1842). The requirement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Delivery is required within 193 days of award, with the destination and acceptance point located at the DLA Distribution New Cumberland facility in Pennsylvania. The contract specifies FOB Origin terms and requires strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following RP001 requirements. Quality assurance is stringent, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero non-conformance threshold for acceptance under MIL-STD-105/ASQ Z1.4. The solicitation incorporates several critical regulatory requirements, including CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and compliance with the Buy American Act and the Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotations were due by September 16, 2026, and must be submitted to the issuing office in Richmond, Virginia.

General Info

DLA Aviation seeks eight RTX part 4501093 units, delivered within 193 days.

Contract Value

$2,717.6

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Award Issued Date

Documents

2

Delivery Order SPE4A1-26-F-1495

PDF, High priority: read this firsttask-order-award
High

SPEA41-26-T-2741 Request for Quotations

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Office AddressUSA
Contacts

Full Description

Show more
DLA award SPE4A126F1495 posted on DIBBS. Awardee: AAR SUPPLY CHAIN, INC (CAGE 1Y249) Total Contract Price: $2,717.60 Award Date: 09-16-2026 Delivery order under: SPE4A124G0043 Solicitation: SPE4A1-26-T-2741 Line items: - SHIELD HEAT (NSN/Part 2935016441842, PR 7017039628)

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
ELECTRONIC MODULE, S
Solicitation # SPE7M5-26-T-340C
This contract specifies the procurement of one electronic module, part number IC693MDL940 with NSN 5963-01-466-1976, under solicitation SPE7M5-26-T-340C, with a requirement for delivery within five days to a designated FOB destination. The item is classified as ESD sensitive and must be packaged in compliance with stringent military standards including MIL-STD-2073-1E and MIL-STD-129 for marking and handling. ESD and EMI protection is mandatory, requiring the use of qualified barrier materials as per MIL-PRF-81705 Type I and Type III specifications, sourced exclusively from manufacturers listed on the QPL-81705. The supplier is responsible for ensuring all packaging materials meet these requirements and for providing technical documentation if the solicitation does not explicitly call for ESD/EMI protective measures. The item must be properly cushioned to prevent physical damage to leads and terminals, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. All packaging and marking must adhere to DLA regulations, including the use of special marking code 39 indicating ESD sensitivity, and the entire shipment must follow DLA logistics procedures for transportation and delivery. The delivery address is the U.S. Navy/AMC Air Terminal in Bahrain, with a secondary parcel post address in FPO AE 09838. The contract references DLA’s Master List of Technical and Quality Requirements, and the version in effect on the solicitation issue date governs compliance. The supplier must verify all protective packaging materials are qualified and properly documented. The original required delivery date is March 3, 2023, with the contract solicitation posted in 2026, indicating a future contracting window. Contact for inquiries is Margaret Smith of the Department of Defense’s Active Devices Division, and compliance with all DLA packaging and handling protocols is non-negotiable for acceptance.
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 325520
New
DIBBS
RESIN EPOXY
Solicitation # SPE8ES-27-T-0148
Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.
Adhesive Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS