Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHIELD, SAFETY, PIPE

Active
SPE7M3-26-T-6029Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation from the Department of Defense Fluid Handling Division for the procurement of 217 aluminized glass cloth pipe flange safety shields. These shields are designed for fuel and lube oil service systems and must meet specific dimensions of 8 inches in width and 30 feet in nominal length, with a permitted tolerance of plus 1/4 inch and minus 0 inches on the 1.5 inch silicone cloth overlap. The items must be inspected and tested according to drawing notes and adhere to DLA packaging requirements. The contract carries strict compliance mandates, including CMMC Level 2 certification for third-party assessment organizations. Additionally, the technical data is subject to export controls under ITAR and EAR regulations, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Delivery is required within 208 days after the order.

General Info

DoD procurement of 217 pipe flange safety shields requiring CMMC Level 2 certification.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-6029 RFQ

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHIELD,SAFETY,PIPE
SHIELD, SAFETY, PIPE FLANGE.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) ALUMINIZED GLASS CLOTH, 8.00 INCH WIDTH, 30.00 FEET NOMINAL LENGTH. END ITEM-FUEL AND LUBE OIL SERVICE SYS. EXCEPTION: PLUS (+) 1/4 MINUS (-) 0 INCH IS ACCEPTABLE ON THE 1-1/2 INCH OVERLAP ON THE SILICONE CLOTH OF THE SHIELDS. INSPECT AND TEST TO DRAWING NOTES.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4730-01-010-1000 Quantity: 217 EA Purchase Request: 7016885148QTY: 217 Delivery: 208 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-8633
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 197 steel pipe elbows featuring a 45 degree flow angle and 1-1/2 inch nominal pipe size with female NPSM threaded swivel nuts and male NPTF threads, adhering to SAE hydraulic tube fitting standards. The contract, identified by solicitation number SPE7M3-26-T-8633 and NSN 4730-00-725-3705, requires delivery within 160 days after receipt of order. Compliance requirements are stringent, necessitating CMMC Level 2 certification via a C3PAO. Additionally, the item is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Eligible contractors must have an approved US/Canada Joint Certification Program certification and have completed specific DLA export-control training and questionnaires to access the necessary technical data.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, WATER CONNECT
Solicitation # SPE7L5-26-T-4990
Solicitation SPE7L5-26-T-4990 is a Request for Quotations issued by DLA Land and Maritime, Land Supplier Opns Engines, for the procurement of 237 water connection elbows, identified by NSN 4730-01-180-2705. These components are critical application items used on Colt Industries-S.E.M.T Pielstick 16 cylinder diesel engine model PC2.5V, which are installed on landing craft models LSD41 through LSD44. The required delivery date is December 16, 2026, with a delivery window of 113 days after the award. Shipping is designated as FOB Origin, with the destination and acceptance point located at the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via RA001 and specifies packaging and marking standards according to MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with RP001 DLA packaging requirements. Environmental restrictions prohibit the use of Class I ozone depleting chemicals and the intentional addition of mercury, except for specific functional exceptions. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.225-7036 Alternate IV is required. All quotes must be submitted electronically through the DLA Internet Bid Board System, and payment processing will be handled via the Wide Area WorkFlow system.
LAND SUPPLIER OPNS ENGINES

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-330K
This contract is a solicitation for the procurement of two metal tube assemblies, identified by NSN 4710-12-332-0798, for the Department of Defense Fluid Handling Division. The requirement is a total small business set-aside with a delivery timeline of 150 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and the items are designated as critical application components. Specific part numbers associated with J.P. Sauer Sohn Maschinenbau GmbH and Sauer Compressors USA are referenced for the assembly.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
STRAINER BODY, SEDIM
Solicitation # SPE7M3-26-T-8211
Solicitation SPE7M3-26-T-8211 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 36 sediment strainer bodies, identified by NSN 4730-01-091-9010. The required delivery date is April 12, 2027, with the place of performance and delivery located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract imposes strict technical and security requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization must follow RP001. Additionally, offerors must comply with the Buy American Act and the Berry Amendment. Invoicing and payment processing are to be managed electronically through the Wide Area WorkFlow system.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLIC
Solicitation # SPE7M4-26-T-334M
Solicitation SPE7M4-26-T-334M, issued by the DLA Land and Maritime Fluid Handling Division, is a request for 15 feet of 5.00 NPS Schedule 80 seamless carbon steel pipe with a 0.375 inch wall thickness, Grade B. The material must conform to ASTM A106/A106M and reference drawing 16236 4710V0833. Delivery is required FOB destination to the DLA Distribution DDSP New Cumberland facility within 189 days after order, with a specified need ship date of March 2, 2027. This is not a small business set-aside, and the procurement is subject to full and open competition. The contract mandates strict quality and marking requirements, including continuous product marking every three feet and the submission of a Certificate of Quality Compliance (COQC) via the iRAPT system. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with RP001 and MIL-STD-129. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for cybersecurity. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TU
Solicitation # SPE7M1-26-T-277C
Solicitation SPE7M1-26-T-277C is a Request for Quotations issued by DLA Land and Maritime, Maritime Supply Chain, for the procurement of 189 units of straight tube-to-boss adapters. The items are identified by NSN 4730-01-233-3701 and correspond to part number J534P10 from General Electric Company (CAGE 07482) and CFM International Inc (CAGE 58828). This is a total small business set-aside under NAICS code 332996. The required delivery is within 78 days, with shipping terms specified as FOB Origin and the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Specifically, items must be delivered in heat-sealed barrier bags to ensure cleanliness. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The solicitation explicitly prohibits the use of additive manufacturing for the produced items and forbids the use of Class I ozone-depleting chemicals. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and payment processing is required through the Wide Area WorkFlow (WAWF) system.
MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-302A
The contract involves the procurement of 35 units of a metal tube assembly with the NSN 4710-00-453-9325 under solicitation SPE7M4-26-T-302A, issued by the Defense Logistics Agency’s Fluid Handling Division. Delivery is required 265 days after award, with FOB ORIGIN terms meaning title and risk transfer to the government at the contractor’s facility, and final delivery is to be made to DLA Distribution Anniston, Alabama. The item is subject to stringent export control under ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure or transfer of technical data to foreign persons, whether inside or outside the U.S., and compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandated DLA training, and explicit approval by DLA authorities. Packaging must comply with ASTM D3951 and, where applicable, override by the DLA Master List of Technical and Quality Requirements, while marking and labeling adhere to MIL-STD-129 with required barcoding for shipment and storage. Hazardous material labeling must conform to OSHA’s Hazard Communication Standard, subject to exemptions under specific federal statutes, and the contractor must submit Safety Data Sheets in compliance with Federal Standard No. 313. Transportation by sea requires the use of U.S.-flag vessels unless a formal waiver is secured at least 45 days in advance, with full documentation and post-shipment reporting obligations. The contractor must implement cybersecurity safeguards per NIST SP 800-171 as enforced through DFARS 252.240-7997 and FAR 52.240-93, with compliance verified by a CMMC Level 2 certification. All subcontracting activities must follow DFARS 252.244-7999 and FAR 52.244-6, and payment must be processed electronically via Wide Area WorkFlow (WAWF). The contractor is responsible for immediate reporting of any potential safety issues and must maintain robust inspection systems aligned with SAE AS9003 or ISO 9001, with government inspection and acceptance performed at origin. Representations regarding small business status, UEI, CAGE codes, and covered telecommunications equipment must be
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
PLUG, QUICK DISCONNE
Solicitation # SPE7M3-26-T-8158
This contract is a solicitation for a quick-disconnect plug, identified by NSN 4730-01-394-3297, designated as a commercial item intended for use on F/A-18 Hornet and S-3A Viking aircraft. The requirement is for 312 units under a Women-Owned Small Business set-aside, with a delivery schedule of 125 days after receipt of order, aligning with a need ship date of December 25, 2026, and an original delivery date of January 4, 2027. All units must be shipped FOB origin, with delivery directed to DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103. Packaging must strictly comply with MIL-STD-2073-1E, including a heat-sealed barrier bag for cleanliness, and palletization must meet DLA’s RP001 packaging requirements, with an emphasis on reducing plastic use without compromising protection. Marking must adhere to MIL-STD-129 with special code 24 indicating “Open for inspection or use.” Inspection and acceptance are both performed at destination, with the FAR 52.246-2 clause governing inspection procedures. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the specified website. The item is supplied by approved commercial sources including SATAIR A/S, Eaton Aeroquip LLC, and Jaidinger Mfg Co Inc, and must meet stringent material restrictions under the Buy American Act and Berry Amendment, with the Berry threshold lowered to $150,000. Compliance with hazardous materials regulations is mandatory, including prohibitions on hexavalent chromium and the handling of toxic substances. Cybersecurity requirements under DFARS 252.204-7012 and 252.204-7018 mandate safeguarding defense information and prohibit the use of covered telecommunications equipment. Offerors must also adhere to labor ethics clauses, including whistleblower protections, anti-trafficking provisions, and restrictions on compensation for former DoD officials. Electronic submission through DIBBS is required by August 21, 2026, and payment must be processed via WAWF with electronic invoicing for fixed-price line items. The contract includes multiple DFARS and FAR clauses governing information security
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
PLUG, TUBE FITTING, T
Solicitation # SPE7M3-26-T-8247
Solicitation SPE7M3-26-T-8247 is a request for quotations issued by the Defense Logistics Agency Land and Maritime, Fluid Handling Division, for the procurement of 308 threaded tube fitting plugs, identified by NSN 4730002030246. This is designated as a critical application item and must be manufactured in accordance with SAE AS18280H Revision H and SAE AS21913E Revision E. The items must be produced by an accredited manufacturer listed in the Performance Review Institute Qualified Manufacturer List or Qualified Products List. The delivery period is 137 days after receipt of order, with shipping terms set as FOB Origin and the destination point as the DLA Distribution Depot Oklahoma at Tinker AFB. The contract requires strict adherence to quality and packaging standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. All deliverables must be free of Class I ozone depleting chemicals. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is mandatory. Inspection and acceptance will occur at the destination per FAR 52.246-2. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation is assigned NAICS code 332996 and is managed by procurement official William Cain.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE TO HOSE
Solicitation # SPE7M3-26-T-8210
Solicitation SPE7M3-26-T-8210, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for 27 units of tube-to-hose elbows, identified by NSN 4730008524309. The procurement is for a critical application item with a required delivery date of February 2, 2027, and a delivery lead time of 161 days. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Barstow in California. The contract mandates strict adherence to DLA packaging requirements, including RP001 for palletization and MIL-STD-129 for marking and labeling, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Environmental and safety constraints prohibit the intentional addition of mercury or mercury-containing compounds. Compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. Invoicing must be processed electronically through the Wide Area WorkFlow system.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M4-26-T-332A
This contract is for the procurement of 127 bronze pipe coupling adapters under solicitation SPE7M4-26-T-332A for the Department of Defense Fluid Handling Division. The hardware features a 2 inch nominal threaded end and a 2 inch nominal pipe size socket fit with a ring. Manufacturing may require specific casting or forging processes and tooling, for which the government may not provide the necessary equipment. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the supplies, with limited exceptions for specific functional components. Delivery is required within 69 days to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of November 4, 2025.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE4A5-26-T-359M
Solicitation SPE4A5-26-T-359M is a fixed-price request for quotations issued by DLA Aviation for the procurement of 12 metal tube assemblies. The required items are U-shaped, bent metal assemblies identified by NSN 4710-00-677-6182 and Honeywell International P/N 138038. This is a critical application item designated as a small business set-aside. Delivery is required within 171 days after receipt of order, with the destination for inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with DLA Master List requirements taking precedence. Palletization must comply with RP001. Quality assurance will be managed via sampling methods according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the provider must comply with CMMC Level 2 self-assessment and safeguarding requirements for covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332912
New
DIBBS
FITTING, LUBRICATION
Solicitation # SPE7M3-26-T-8188
This contract is for the procurement of one lubrication fitting, identified by NSN 4730011729119 and part number 41002974 from PTI Technologies Inc. The order is managed under solicitation SPE7M3-26-T-8188 by the Department of Defense Fluid Handling Division, with a required delivery date of August 14, 2026, and a delivery window of 20 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Key compliance requirements include CMMC Level 2 self-assessment and the protection of covered defense information. The item is to be shipped FOB Origin to the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, Taiwan.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED TU
Solicitation # SPE7M3-26-T-8152
The contract specifies the procurement of SEAL, CONICAL, FLARED TUBE FITTING, identified by part number AS4824A16 and NSN 4730-01-538-3942, to be supplied in accordance with SAE AS4824B (R2015) standards and guided by Technical Data Package Rev A Gen 2. The item is designated as a critical application component, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements via R or I numbers. Each package contains two units (1 PG = 2 EA), and the conical seals must remain enclosed in their protective plastic round vials during shipment to prevent crushing; removal is expressly prohibited. Packaging must comply with MIL-STD-2073-1E, including specific parameters such as QUP 001, preservative method 10, Class 1 drying, and wrapping material ZZ. Marking is required per MIL-STD-129 with the designation “1 PG (2 EA)” and no special marking code. The contract mandates origin inspection and acceptance under FAR 52.246-2 and permits Certificate of Conformance procedures per FAR 52.246-15 unless overridden by a Quality Assurance Letter of Instruction. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval unless authorized by the specification. All deliveries must be FOB Origin with an 88-day delivery window from the need ship date of August 6, 2026, to the original required delivery date of March 12, 2027. The requirement is for 453 packages (906 units), and the full and open competition is not set aside for small businesses. The contract imposes multiple DFARS and FAR clauses governing cybersecurity, safeguarding defense information, prohibitions on hexavalent chromium and covered telecommunications equipment, whistleblower protections, and restrictions on subcontracting under FAR 52.219-14 with deviation 2021-00008. Non-domestic material requires disclosure, additive manufacturing is prohibited, and no Fast Pay applies. All quotes must be submitted via DIBBS prior to the response deadline of August 21, 2026. Payment will be processed electronically through WAWF, and the point of contact for administrative and procurement matters is
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
New
DIBBS
TUBE ASSY
Solicitation # SPE7M4-26-Q-1001
This contract is for the procurement of 121 tube assemblies for the H-53 helicopter, identified as a Navy Critical Safety Item and a critical application item. The requirement is a restricted source item necessitating engineering source approval by the government design control activity. Delivery is set for 490 days after receipt of order, with inspection and acceptance occurring at the origin. The contractor must adhere to strict quality and security standards, including CMMC Level 2 self-assessment, SAE AS9100 higher-level quality requirements, and the prohibition of class I ozone depleting chemicals. Packaging and marking must comply with MIL-STD-129 and DLA procurement requirements. All waivers or deviations require approval from the DSC contracting officer, and the contract includes provisions for government first article and production lot testing.

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-337H
Solicitation SPE7M4-26-T-337H is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 248 nonmetallic hose assemblies, identified by NSN 4720017030478. This is a total small business set-aside under NAICS code 326220. The required delivery date is February 18, 2027, with a delivery window of 177 days. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including the prohibition of class I ozone depleting chemicals and additive manufacturing unless specifically authorized. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Contractors are required to maintain supply chain traceability documentation per DLA Directive Procurement Note C03. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-339B
Solicitation SPE7M4-26-T-339B is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two nonmetallic hose assemblies, identified by NSN 4720-01-379-5428. This is a Foreign Military Sales requirement for Taiwan, with the final delivery destination being the Parts-Attach General Depot in Tainan City. The required delivery date is August 18, 2026, with a delivery period of five days after receipt of order. Inspection and acceptance are both designated to occur at the point of origin. The contract mandates strict adherence to technical and quality requirements via RA001 and packaging standards under MIL-STD-2073-1E and RP001. Marking must comply with MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with domestic material restrictions, including the Buy American Act and Berry Amendment, and adhere to cybersecurity standards under DFARS 252.204-7012.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-335N
Solicitation SPE7M4-26-T-335N is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 11 units of Hose Assembly, Nonme, identified by NSN 4720-01-549-1464 and CNH Industrial America LLC part number 87418552. The requirement is categorized under NAICS code 326220. The need ship date and original required delivery date are both set for March 10, 2027, with a delivery lead time of 197 days after order. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Payment must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various federal and defense acquisition regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and reporting cyber incidents. Quotations were due by August 24, 2026, and should be submitted to the issuing office in Columbus, Ohio.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-332L
This contract is for the procurement of 11 kits of nonmetallic hose assemblies, identified by NSN 4720013894264 and part number 83001-225 from Hydraulics International, Inc. The agreement is a total small business set-aside under the Department of Defense Fluid Handling Division. Delivery is required within 187 days, with a need ship date of February 28, 2027, and a final required delivery date of April 8, 2027. The items are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. A critical requirement is the prohibition of Class I ozone-depleting chemicals in the manufacturing process. Additionally, the items are designated as Type I with a non-extendable shelf life of 120 months, requiring detailed shelf-life markings on all packaging and unpacked items. Inspection and acceptance will take place at the destination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7M4-26-T-329R
The contract pertains to the procurement of 1,758 units of RETAINER, PACKING with NSN 5330-00-419-2969 under solicitation SPE7M4-26-T-329R, issued by the Department of Defense’s Fluid Handling Division. The item is classified as a commercial item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The retainer must be manufactured to the current revision of its governing part standard, and prior iterations of the standard are acceptable for historically produced hardware, but all new production must adhere to the latest standard. The item is subject to stringent material restrictions: no asbestos as defined in FED-STD-313 is permitted, and mercury or mercury-containing compounds must not be intentionally added or come in direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The supplies must be delivered within 63 days of award to Tracy, California, with a response deadline of August 21, 2026, and the procurement is fully competitive under a federal specification. Point of contact for inquiries is Freddie Vazquez at the provided email and phone number.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333998
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-26-T-8174
This contract is for the procurement of three sediment strainer screen assemblies used for debris detection in combiner and engine transmissions. The items are identified by NSN 4730-01-112-3061 and correspond to Boeing part number 145DS516-2 and Eaton Aerospace part number A8759. This is designated as a critical application item, requiring strict adherence to calibration standards and tailored higher level quality requirements. The agreement mandates that no Class I ozone depleting chemicals be used in the production or delivery of the items. Delivery is set for the DLA Distribution New Cumberland facility in Pennsylvania, with inspection and acceptance occurring at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA procurement requirements. The original required delivery date is July 29, 2027, with a final need ship date of February 4, 2028.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332312
New
DIBBS
SCREEN ASSY, INLET
Solicitation # SPE7M4-26-Q-1000
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 16 units of an inlet screen assembly, identified by NSN 1560-01-471-8483. The components must adhere to Bell Helicopter Textron Inc drawings, with Eaton Aerospace LLC listed as the approved source under part numbers 2H6840 and 901-345-541-101. The required delivery timeframe is 180 days after the order is received. Compliance requirements are stringent, necessitating CMMC Level 2 certification via a certified third-party assessment organization. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Fabricated Structural Metal Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details