Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Metallic Tubes (NSN 4710-01-541-1223)

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or procurement of four specialized metallic tubes under NSN 4710-01-541-1223 for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all units are packaged according to RP001 DLA Packaging Requirements and that hazardous materials are labeled in strict accordance with 29 CFR 1910.1200. To be eligible, the contractor must possess a valid CAGE code and maintain full compliance with the DLA Master List of Technical and Quality Requirements. The performance of this contract is centered in Tracy, California, with a response deadline set for November 2, 2026.

General Info

Procure four metallic tubes for DoD DLA by November 2, 2026, in California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1576.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE, METALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized metallic tubes for prime contractors delivering DLA supply contracts. Manufactures or sources metallic tubes according to NSN 4710-01-541-1223, performing packaging per RP001: DLA Packaging Requirements for Procurement and hazardous materials labeling per 29 CFR 1910.1200. Requires a CAGE code and compliance with DLA Master List of Technical and Quality Requirements. Delivers four units of packaged and labeled metallic tubes.

Similar Contracts

Same NAICS industry code

Fabrication of Metal Tube Assemblies (NSN 4710010832955)This subcontract involves the fabrication of 21 metal tube assemblies under NSN 4710010832955 for the Department of Defense DLA Weapons Support Fluid Handling Division. The project requires precision bending and cutting in strict accordance with the DLA Master List of Technical and Quality Requirements. All completed units must be packaged according to ASTM D3951 and MIL-STD-129 standards and delivered to Jacksonville. The opportunity is set aside for Women-Owned Small Businesses under NAICS code 332999. To be eligible, contractors must maintain CMMC Level 2 certification and ensure full compliance with the Berry Amendment. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Tube Coupling Bodies (NSN 4730013554788)This subcontract involves the supply of 12 Tube Coupling Bodies, identified by NSN 4730013554788, for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the components to exact technical specifications and ensuring all items are packaged according to ASTM D3951 standards. Performance for this contract will take place at Robins Air Force Base. To facilitate payment and processing through WAWF, the contractor must maintain an active SAM registration and a valid CAGE code. The opportunity is categorized under NAICS code 332996, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Precision Machining and Fabrication of Pipe-to-Tube TeesThis subcontract involves the precision machining and fabrication of 204 Pipe-to-Tube Tees for the Department of Defense DLA Weapons Support Fluid Handling Division. The units must be manufactured according to TDP Rev B Gen 2 and drawing 19207 11668689 using traditional machining methods, as additive manufacturing is strictly prohibited. Performance of the contract takes place in New Cumberland, Pennsylvania, under NAICS code 332996. The contractor is required to maintain DFARS 252.204-7012 compliance and perform quality testing in accordance with MIL-STD-1916 or ASQ H1331. Final delivery of the units must include a Test Report and a Certificate of Quality Compliance. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Flexible Tube Coupling AssembliesThis subcontract involves the manufacturing of 97 finished critical application flexible tube coupling assemblies for the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for fabricating parts that strictly adhere to approved specifications for Boeing P/N 7M765-10D, Hydraflow P/N 14J12-10A, or Transdigm P/N W901K10DE. All production must comply with RA001 quality requirements, and the use of additive manufacturing is strictly prohibited unless prior authorization is granted by the ESA. The work is to be performed in New Cumberland, Pennsylvania, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Tube Elbows (NSN 4730-01-392-2367)This subcontract involves the manufacture of 10 tube elbows under NSN 4730-01-392-2367 for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating components that meet specific technical and quality requirements using either standard metal fabrication equipment or approved additive manufacturing processes. Key compliance mandates include adherence to NIST SP 800-171 cybersecurity standards and a strict prohibition on the use of hexavalent chromium. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Pipe Plugs (NSN 4730-00-152-1201)This subcontract involves the manufacture or sourcing of pipe plug components under NSN 4730-00-152-1201 for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all hardware meets strict government technical specifications and delivering the completed components FOB Origin. The performance period requires delivery within 168 days of the award, with the place of performance located in New Cumberland. This opportunity falls under NAICS code 332996 and requires full compliance with the technical data associated with the specified National Stock Number.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Steel Pipe Tees (NSN 4730-00-088-8819)This subcontract involves the manufacture and supply of 173 steel pipe tees for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The required components are 0.500 inch nominal size socket weld tees made from ASTM A105 GR#2 steel, adhering to ASME B16.11-2021 standards with a 3000 PSI pressure rating and Schedule 80 wall thickness. The contractor is responsible for delivering 173 units of NSN 4730000888819, ensuring all items are packaged according to MIL-STD-2073-1E and MIL-STD-129. Each delivery must include a Certificate of Conformance. Performance for this contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Tube Tee Assemblies (Complete)This subcontract involves the supply of 190 complete tube tee assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. Each assembly must include the tee, nut, and sleeve. The contractor is responsible for ensuring all units are packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The performance of this contract takes place in Tracy, California, under NAICS code 332996. A critical compliance requirement is the adherence to FAR 52.204-24, which prohibits the use of covered telecommunications equipment. The final deliverable consists of 190 fully packaged and marked assemblies delivered in accordance with the specified military standards.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Brass Hose Couplings (NSN 4730014238771)This subcontract involves the manufacture and supply of 13 brass hose couplings for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The couplings must meet internal NPSH specifications for NSN 4730014238771 and strictly adhere to DIA Master quality requirements RA001 and RP001 diameter packaging standards. The project is categorized under NAICS code 332996, with the place of performance located in Tracy, California. Interested parties must respond by November 2, 2026, to fulfill the requirements of this procurement action.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Tube Couplings (NSN 4730002792717)This subcontract, issued by the DLA Weapons Support Fluid Handling Division, requires the provision of precision-manufactured tube couplings under NSN 4730002792717. The supplier must manufacture or source parts that match specific part numbers from Boeing, Eaton, SPS, or Parker-Hannifin. Strict production constraints are in place, specifically prohibiting the use of additive manufacturing. Compliance requirements include adherence to the Buy American Act and a CMMC Level 2 Self-Assessment. Finished couplings must be packaged according to ASTM D3951 and MIL-STD-129 standards for delivery to Warner Robins and Tinker Air Force Base. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Fabrication of Metal Tube Assemblies (Caterpillar PN 2135673)This subcontract involves the fabrication of two custom metal tube assemblies, specifically Caterpillar part number 2135673, for the DLA Weapons Support Fluid Handling Division. The scope of work requires precision bending, forming, welding, and brazing of fittings to tube ends, followed by necessary deburring and finishing processes. Performance will take place in New Cumberland, Pennsylvania. The contractor must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001, as well as the Buy American Act and the Berry Amendment. Additionally, the use of mercury and hexavalent chromium is strictly prohibited. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Fabrication of Metal Tube Assemblies (NSN 4710010743723)This subcontract involves the fabrication of 24 metal tube assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the bending, cutting, and fitting of metal tubing in strict accordance with Basic Drawing NR 19207 12286690 Revision E and TDP Rev A Gen 1. All finished items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The project is categorized under NAICS code 332996 and will be performed in New Cumberland. A critical environmental requirement of the contract is the total prohibition of Class I ozone-depleting chemicals during the manufacturing process. All delivered assemblies must undergo full inspection to ensure compliance with the specified technical drawings and military standards.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Globe Valve Parts Kit SupplierThis subcontract involves the supply of 49 completed and packaged globe valve parts kits for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The scope of work includes the manufacturing or sourcing of components, kit assembly, and packaging in strict accordance with MIL-STD-2073-1 Appendix D. Additionally, the supplier must ensure all marking and labeling comply with MIL-STD-129 and provide Safety Data Sheets that meet Federal Standard No. 313 and 29 CFR 1910.1200(g) requirements. The project falls under NAICS code 332911 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 2, 2026, to be considered for this procurement effort.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized packaging and marking for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 1,065 O-rings in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against UV deterioration. Additionally, the contractor must execute all marking and labeling per MIL-STD-2073-1E and MIL-STD-129 standards to ensure items are prepared for military transport. The final deliverables are to be delivered to Tinker AFB. The project falls under NAICS code 561910 and is managed under the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Specialized O-Ring Fabrication (NSN 5331010074901)This subcontract involves the fabrication of 1,065 high-performance O-rings for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to technical specifications SAE AMS-R-25988B Revision B or MIL-DTL-25988/1B Revision B, utilizing asbestos-free compounds in accordance with FED-STD-313. All deliverables must comply with the Buy American Act and the Berry Amendment. The work is associated with NSN 5331010074901 and falls under NAICS code 326299, with the place of performance located at Tinker AFB. Interested parties must respond by November 2, 2026, to provide the finished components meeting all specified military and federal standards.

All Other Rubber Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supplier of Diaphragm Baffles (NSN 4820003350017)This subcontract involves the supply of ten specialized diaphragm baffles for the DLA Weapons Support Fluid Handling Division. The hardware must match Eaton Corporation part number 200819 under NSN 4820003350017 and be delivered FOB Origin to Tinker AFB. The supplier must ensure strict adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, as well as RP001 DLA packaging requirements. Additionally, the contractor is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized packaging, marking, and palletization services for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 97 hose assemblies, ensuring all items are packaged according to ASTM D3951, marked per MIL-STD-129, and palletized in accordance with RP001. The contractor must utilize industrial labeling equipment and MIL-SPEC packaging materials to meet strict military standards. The completed deliverables are to be transported to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 493110 and is designated for prime contractors supporting the agency's fluid handling operations.

General Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of 97 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required assemblies must feature a 1/2 inch inside diameter and a nominal overall length of 108.0 inches, including perforated covers. All production must strictly adhere to NSN 4720-01-359-0598 and RA001 standards. The project is subject to strict regulatory requirements, including compliance with the Buy American Act and the Berry Amendment. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026.

All Other Plastics Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Mounting Plates (NSN 5340-01-318-6909)This subcontract involves the fabrication or procurement of two mounting plates, identified by NSN 5340-01-318-6909, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all items are packaged in strict accordance with DLA RP001 Packaging Requirements for Procurement. To be eligible for this opportunity, contractors must possess a valid UEI and CAGE code. The project falls under NAICS code 332510, with a response deadline set for November 2, 2026.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Hose Clamps (NSN 4730-01-596-1298)This subcontract involves the supply of 124 hose clamps (NSN 4730-01-596-1298) for prime contractors working with the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing units that strictly adhere to SAE J1508-2009 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. All parts must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin. Additionally, the contractor must maintain cybersecurity compliance as outlined in NIST SP 800-171. The performance of this contract is associated with the location in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing military-grade packaging and marking services for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the preparation of five valves for First Destination Transportation shipment, ensuring full preservation and traceability of the fluid handling components. Technical execution must strictly adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, utilizing QUP 001, Pres Mthd AE, and designated cushioning and dunnage materials. The performance of these services will take place in Tracy, California, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Supply of Safety Relief Valves (NSN 4820-01-238-5948)This subcontract involves the procurement or manufacture of five specialized safety relief valves for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must match Eaton Aerospace part numbers 847357 and L1-CS-06-B-50, falling under NSN 4820-01-238-5948. Performance will take place in Tracy, California, with all deliverables subject to strict sampling and quality assurance standards according to MIL-STD-1916 or ASQ H1331. The contractor must ensure full compliance with the Buy American Act and adhere to environmental prohibitions regarding the use of mercury and hexavalent chromium. Interested parties must respond by November 2, 2026, to fulfill the requirements of this specialized equipment supply effort.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Special Plug (NSN 5342-00-839-1515)This subcontract involves the procurement of 13 units of a special plug, identified by NSN 5342008391515, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for fabricating or sourcing the hardware to ensure full compliance with the established NSN technical specifications. Strict adherence to military and industry standards is required for quality assurance and logistics. All items must be inspected and sampled according to MIL-STD-1916 or ASQ H1331 Table 1, packaged in accordance with ASTM D3951, and marked and labeled per MIL-STD-129. Performance of the contract will take place in Cherry Point, with a response deadline set for November 2, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

Nonmetallic Tubing Supplier (NSN 4720-01-245-6616)This subcontract involves the supply of 709 feet of specialized nonmetallic tubing for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The required tubing must feature a 0.050 inch inner diameter and a 0.110 inch outer diameter, strictly adhering to Saint-Gobain F4040A specifications. The supplier is responsible for ensuring all materials comply with the Buy American Act and ASTM D3951 standards. Additionally, all products must be packaged and marked in accordance with MIL-STD-129 and DLA Master Lists RA001 and RP001. Performance for this contract is centered in Tracy, California.

All Other Plastics Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS