Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SHIELDING GASKET, ELECT

Active
SPE7M5-26-T-337PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of six shielding gaskets classified under NSN 5999-01-341-6563, with a total purchase request quantity of 70 units, to be delivered within 92 days after award. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs compliance based on the revision in effect on either the solicitation issue date or award date depending on the acquisition size. The gasket contains technical data controlled under export regulations, either ITAR or EAR, prohibiting unrestricted disclosure or export to foreign persons or entities without explicit authorization from the Department of State or Department of Commerce; DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with validated US/Canada Joint Certification Program status, completed DOD export control training, and approved DLA authorization. The solicitation number is SPE7M5-26-T-337P, issued on July 20, 2026, with responses due by July 31, 2026, under NAICS code 334416. Performance is required in Jacksonville, Florida, with Margaret Smith of the Department of Defense’s Active Devices Division serving as the primary point of contact. The contract mandates that all supplies be free of government identification if non-accepted and requires the shielding material to be supplied in a continuous 160-inch length. Cybersecurity compliance under CMMC Level 2 by a certified third-party assessment organization is also required.

General Info

Procure 70 shielding gaskets, NSN 5999-01-341-6563, delivered in 92 days, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-337P for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHIELDING GASKET,ELECTRONIC
SHIELDING GASKET,EL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) MATERIAL SHALL BE 160 INCHES CONTINUOUS LENGTH
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5999-01-341-6563 Quantity: 6 EA Purchase Request: 7017441112QTY: 70 Delivery: 92 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
Manufacturing of Fixed Micro Capacitors (MIL-DTL-39028 Compliant)The contract requires the manufacture of 72 fixed micro capacitors fully compliant with MIL-DTL-39028 specifications, encompassing all stages from sourcing raw materials and assembly to rigorous testing, proper packaging, and accurate marking for traceability and compliance. The work must be completed in accordance with military standards, ensuring performance, reliability, and environmental resilience under operational conditions expected in defense applications. All deliverables must meet stringent quality control benchmarks and documentation requirements to validate conformance throughout the production lifecycle. The contract is issued as a subcontract under the NAICS code 334416 for electronic component manufacturing, with performance scheduled to occur at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, indicating a narrow twelve-day window for proposal submission. The contracting activity falls under the Department of Defense through its Active Devices Division, signifying this is part of a critical defense supply chain requiring adherence to federal procurement protocols and readiness for inspection and audit. Delivery timelines and compliance verification are central to fulfilling contractual obligations successfully.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
Radio Frequency Coil Manufacturing and SupplyThe contract requires the manufacture and supply of three Radio Frequency Coils identified by National Stock Number 5950-01-223-9021 and part number 11449949-9, all of which must strictly comply with applicable military specifications and the National Defense Authorization Act of 2018 provisions that prohibit the use of telecommunications equipment from certain restricted vendors. The product must be produced and assembled in accordance with defense standards to ensure operational reliability and supply chain integrity, with special attention to sourcing components from approved and compliant suppliers. All units are to be delivered to the designated place of performance in Chambersburg, Pennsylvania, with final inspection and acceptance procedures governed by defense procurement protocols. This subcontract, issued under the NAICS code 334416 for Electromedical and Electrotherapeutic Apparatus Manufacturing, is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and interested parties must submit proposals through the DIBBS platform using the provided link. Compliance with all federal procurement regulations, including those related to cybersecurity, supply chain risk management, and export control, is mandatory. Failure to meet the NDAA 2018 restrictions or military specifications will result in automatic disqualification or contract termination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
Power Supply Assembly ManufacturingA subcontract is being issued for the design, fabrication, testing, and delivery of a single Power Supply Assembly designated by NSN 6130-01-476-2036, requiring full compliance with military technical specifications. The deliverable must include complete documentation, proper packaging and marking, and adherence to current cybersecurity standards, ensuring the unit is ready for immediate integration into defense systems. All work must be performed in accordance with the stringent quality and security protocols expected by the Department of Defense. The solicitation, posted by the Defense Logistics Agency on July 20, 2026, has a response deadline of July 31, 2026, and is classified under NAICS code 334416 for electrical equipment manufacturing. The place of performance is listed as FPO with ZIP code 96675, indicating delivery to a military postal address. This opportunity is open to qualified subcontractors with proven capability in military-grade power system development and must meet all federal contractual obligations without set-aside restrictions.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RF Interference Filter Supply (COTS Component)The contract entails the supply of 108 commercial off-the-shelf radio frequency interference filters designed to meet stringent military packaging, labeling, and cybersecurity requirements. These components are intended for use in defense-related systems where electromagnetic compatibility and secure data integrity are critical. The items must comply with all applicable military standards without custom modification, leveraging existing COTS products to ensure rapid deployment and cost-efficiency while maintaining operational reliability under demanding environmental conditions. Issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense, the procurement falls under NAICS code 334416, which encompasses electromagnetic and electronic warfare equipment manufacturing. The contract was posted on July 20, 2026, and is managed through the DIBBS system with the contract number SPE7M026V4714. Performance location details are unspecified, indicating potential flexibility in delivery or reliance on existing defense supply chains. No set-aside provisions or small business designations are indicated, and all units must be delivered with full documentation confirming compliance with defense-grade security and labeling protocols.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 334416
New
DIBBS
Pulse Forming Network (PFN) Component ManufacturingThe contract seeks the manufacture and delivery of four high-reliability Pulse Forming Network units, identified by NSN 5915014436478, for use in pulsed power systems. These electronic assemblies are critical components requiring strict adherence to performance and durability standards, with all units to be produced and delivered to the specified place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under the NAICS code 334416, classifying it within the electronic component manufacturing sector, and is issued as a subcontract under the Department of Defense’s Active Devices Division. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, providing a narrow ten-day window for potential suppliers to submit proposals. No set-aside provisions or specific organization types are indicated, meaning the contract is open to qualified commercial entities regardless of size or status. The official solicitation can be accessed via the provided DIBBS link, and while no point of contact is listed, all inquiries must be directed through the designated procurement channel referenced in the posting. Delivery timelines, technical specifications, and compliance documentation will be central to any successful bid, given the mission-critical nature of the components.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
Thermal Resistor Component SupplyThe contract involves the supply of a military-spec thermal resistor identified by NSN 5905-01-524-1193, with strict compliance required to MIL-STD-129 for marking and packaging and J-STD-609 for soldering and interconnection standards. Delivery must be completed within 30 days of contract award, ensuring timely integration into defense logistics streams. The item falls under NAICS code 334416, indicating it is classified within the electronic component manufacturing sector, and the procurement is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESO BUYS organization. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapid procurement timeline typical of urgent defense supply needs. All offerings must meet exacting military compliance standards without exception, and performance is expected to align with DoD logistics protocols. The contract is administered through the DIBBS platform, and while the place of performance and point of contact details are not specified, the requirement remains firm that the thermal resistor be furnished in full compliance with applicable defense specifications and delivered on schedule.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
CAP, ELECTRICALThe contract pertains to the procurement of 63 electrical capacitors identified by NSN 5999-01-449-1435 under solicitation SPE7M5-26-T-309P, issued by the Department of Defense’s Active Devices Division. Delivery is required within 168 days after award, with all items subject to the Department of Defense Logistics Agency’s packaging and technical requirements as defined in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA eProcurement portal. Compliance with RQ011 and RQ017 mandates the removal of government identification from non-accepted supplies and proper physical marking of bare items, with the alternate offeror obligated to submit a full data package detailing both approved and alternate part specifications. The solicitation was posted on July 20, 2026, with responses due by July 23, 2026, and the place of performance is designated as New Cumberland, PA, 17070-5002. The NAICS code 334416 applies, indicating categorization under Electronic Component and Product Manufacturing, and points of contact for inquiries include Margaret Smith via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECTThe contract is for 40 units of a shielding gasket, electronic, identified by NSN 5999-01-312-3955 and part number 19-11-C957-1212 manufactured by Parker-Hannifin Corporation. Delivery is required within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB Origin terms with zero variance allowed in quantity. All items must comply with DLA’s Packaging Requirements and be marked and labeled per MIL-STD-129. Packaging must adhere to ASTM D3951 for non-hazardous items or TQ requirement IP025 if classified as hazardous under FED-STD-313, with DLA Master List requirements superseding all other standards. The gasket must not contain any Class I ozone-depleting substances unless written approval from the Contracting Officer is obtained, and this prohibition overrides any conflicting specifications without waiving performance criteria. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are verified at levels VII, IV, and II respectively. The unit of issue is each (EA), and palletization must follow DLA packaging guidelines. Inspection and acceptance occur at the destination, with the need ship date set for January 5, 2027, and the original required delivery date set for January 15, 2027. All technical and quality requirements referenced are governed by the DLA Master List effective as of the solicitation issue date, and the contract was issued under solicitation SPE7M5-26-T-308N with a response deadline of July 23, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
FUSE, INCLOSED LINKThis contract, issued under solicitation number SPE7M5-26-T-312H by the Department of Defense’s Active Devices Division, seeks the procurement of FUSE, INCLOSED LINK components with part numbers FIL100 and SA20635-100 from SOURIAU USA, INC., designated as commercial items for critical application use in defense systems. Delivery of 61 units is required at Robins Air Force Base, Georgia, with a 168-day delivery window from the as-directed date, and the items must be delivered FOB origin and accepted at destination. Packaging must strictly follow DLA Master List of Technical and Quality Requirements, superseding ASTM D3951, with non-hazardous items packaged per ASTM D3951 and hazardous items conforming to TQ Requirement IP025 as defined by FED-STD-313. All packaging and labeling must adhere to MIL-STD-129, including proper identification of unit of issue and quantity per unit pack, with palletization governed by RP001. The contract mandates full compliance with applicable technical data referenced in the DLA Master List, even if the full technical data set is not provided. The contract incorporates extensive federal and defense regulations through mandatory clauses spanning FAR and DFARS, including cybersecurity requirements under 252.240-7997 and 252.204-7012, prohibitions on covered telecommunications equipment under 252.204-7018, and trafficking in persons and employment eligibility verification under 52.222-50 and 52.222-54. The contractor must hold a current Unique Entity Identifier and CAGE code, and is subject to continuous compliance with socioeconomic representations including small business status. Payment processing is required through WAWF, and invoicing must align with electronic submission protocols. The contract includes deviation approvals for several clauses, including those related to equal opportunity, sustainable products, and safeguarding information systems. A 0% tolerance range applies to quantity delivery with no authorized variance. The original delivery date is May 1, 2027, with an earlier need ship date of January 5, 2027, indicating urgency in supply chain timing. The contract type remains undetermined as a placeholder, but it operates under Simplified Acquisition Procedures, with price fixed at $61.00 per
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
FILTER, RADIO FREQUENCYThe contract is for the procurement of 18 units of a Radio Frequency Interference Filter with NSN 5915-01-340-5766, issued under solicitation SPE7M5-26-T-317B by the Defense Logistics Agency’s Active Devices Division. The requirement is a total small business set-aside under FAR 19.5, with submissions due by July 23, 2026, and delivery required at the DLA Distribution Jacksonville facility in Florida by 293 days after order placement, with a need ship date of May 10, 2027, and original delivery deadline of July 13, 2027. FOB terms are origin, and payment will be processed through WAWF as mandated. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, even within the U.S., and access is restricted to DLA contractors with approved JCP certification, completed training on handling DOD export-controlled data, and formal authorization. Packaging and marking must comply with RP001, MIL-STD-129, ASTM D3951, and FED-STD-313, with hazardous materials subject to TQ IP025 and 29 CFR 1910.1200 labeling, unless exempt under specific federal statutes. Radioactive materials exceeding specified activity thresholds require distinct labeling. The contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information, implement NIST SP 800-171 controls, report cyber incidents within 72 hours, and adhere to CMMC Level 2 certification as a mandatory eligibility requirement. Offerors must maintain current UEI and CAGE codes, affirm small business status, and submit accurate socioeconomic representations. Unauthorized obligations are unenforceable, and whistleblower protections are enforced. All proposals must be submitted electronically via DIBBS, with no physical submissions accepted. Contract type remains unspecified pending contracting officer determination, and no pricing data is available in the solicitation. The government conducts inspection and acceptance at destination, with quality standards governed by the referenced military and federal standards.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FIXEDThe contract specifies the procurement of a single unit of a fixed film resistor network, identified by NSN 5905012185402 and part number M8340108K3320FC, governed by military specifications MIL-PRF-83401/8E and MIL-PRF-83401H, both revised as of May 29, 2024. Delivery is required within five days of order issuance, with FOB origin terms transferring title and risk to the government upon delivery to the carrier, and final inspection and acceptance occurring at the destination location, Robins Air Force Base, Georgia. The item is designated as a critical application component and must comply with strict DLA packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment labeling, with special attention to lead finish markings per IPC/JEDEC J-STD-609. All packaging must incorporate DOD-qualified ESD and EMI protective materials per MIL-PRF-81705, with barrier materials sourced exclusively from qualified manufacturers listed on QPL-81705, and components must be handled at approved protective workstations. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless prior written approval is obtained from the contracting officer. The contractor must ensure compliance with federal hazardous material labeling requirements under 29 CFR 1910.1200 and is responsible for verifying all material compliance against the DLA Master List of Technical and Quality Requirements. The contract mandates electronic submission through the DIBBS portal with a proposal deadline of July 31, 2026, and requires full and open competition under FAR provisions, including clauses on equal opportunity, combating trafficking, employment verification, and sustainable products. While the unit price is not specified in the CLIN, historical pricing for similar items ranges from $0.99 to $70.35. The contract includes provisions for accelerated payments to small business subcontractors, unenforceability of unauthorized obligations, and authorization and consent clauses with alternates applied. Cybersecurity requirements under DFARS 252.204-7012 and NIST SP 800-171 compliance are mandatory, along with prohibitions on acquiring covered telecommunications equipment from restricted foreign entities. All preserved,
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY ASSEMBLYThe contract pertains to the procurement of a single Power Supply Assembly identified by NSN 6130-01-476-2036, with a delivery requirement of 20 days ADO. The solicitation, issued by the Defense Logistics Agency under number SPE7L7-26-T-4377, is open for response until July 31, 2026, and falls under NAICS code 334416 for electronic component manufacturing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision tied to the solicitation issue date. The contractor must comply with DLA packaging standards and cannot intentionally introduce mercury or mercury compounds into the product except for specific approved applications such as batteries, fluorescent lights, or sensors as defined by NAVSEA, with additional containment requirements for portable devices. Sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on their criticality. The contractor is required to maintain a Cybersecurity Maturity Model Certification Level 2 self-assessment and must remove any government identification from non-accepted supplies. Technical data is not provided by DLA, and performance is to occur at FPO, with Michael Francis designated as the primary point of contact.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
WAWF Invoicing and Payment Processing ServicesThe contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in strict adherence to DFARS 252.232-7006, utilizing either the Invoice 2in1 format or the standard electronic formats prescribed by the Department of Defense. All submissions must be accurately structured and timely delivered to ensure compliance and proper payment processing. The work is scoped under a subcontract and is assigned the NAICS code 541512, indicating a focus on computer systems design and related services. Performance is tied to the location of New Cumberland with ZIP code 17070-5002, and the contracting activity falls under the Active Devices Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and participation is conducted via the DIBBS portal using the provided solicitation number.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Marking, and Shipping Compliance ServicesThe contract requires comprehensive packaging, preservation, and marking services fully aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade compliance for all handled items. Specifically, dry preservation method 10 must be applied to protect equipment from environmental degradation, while unit packaging under Pack Code U ensures items are individually prepared for efficient handling and distribution. All packages must be marked using DoDAAC-based routing protocols to guarantee accurate tracking and delivery through defense logistics networks. The work is tied to a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 493190 indicates the service falls under Other Support Activities for Transportation, emphasizing logistics and handling specialization rather than manufacturing. Proposals must be submitted by August 4, 2026, with the solicitation open since July 20, 2026, and no set-aside provisions specified for small business or other categories.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
Manufacturing of Military-Grade Electrical Connector Body, ReceptacleThe contract requires the manufacture of 18 units of a military-spec electrical connector body, receptacle, identified by Part No. A-A-55463-06 and NSN 5935-01-323-6812, fully compliant with A-A-55463A Revision A, Generation 4, and DLA RA001 specifications. The work must be performed to exacting military standards ensuring reliability and performance under operational conditions, with the finished products destined for use in defense applications. The NAICS code 334417 indicates this falls under the category of Electronic Component and Product Manufacturing, emphasizing precision fabrication and adherence to technical and quality control requirements. The solicitation is classified as a subcontract and was posted on July 20, 2026, with responses due by August 4, 2026. Performance is to occur at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the Active Devices Division under the Department of Defense, which oversees procurement for critical military electronics components. The precise location of performance and the strict compliance requirements indicate that the contractor must have the necessary certifications and capabilities to meet defense-grade production and inspection standards. The contract will be administered through the DLA DIBBS system using the referenced solicitation number SPE7M526Q0741.
Electronic Connector Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Accelerated Payments AdministrationThe contract requires comprehensive administration of subcontracting activities designated exclusively for small businesses under a Total Small Business Set-Aside, as defined by FAR 19.5, with the NAICS code 541611 for management consulting services. The performance location is situated in Cherry Point, North Carolina, with all subcontracting obligations governed by the Federal Acquisition Regulation, particularly the requirement to implement accelerated payments as specified in FAR 52.232-40. The contractor must systematically track all small business subcontractors, maintain accurate records, and submit mandatory reports through the Electronic Subcontracting Reporting System to ensure full compliance with federal guidelines. The contract emphasizes strict adherence to payment timelines for small business subcontractors, with the expectation that payments are accelerated in accordance with the specified regulation. The effort is managed under the Department of Defense and administered by the Active Devices Division, with a response deadline of July 31, 2026, following the posting date of July 20, 2026. No solicitation number is listed, reinforcing the focus on the regulatory structure and administrative rigor required to uphold small business participation and payment integrity. The place of performance and the nature of the work indicate a high degree of coordination with government systems and compliance reporting under defense contracting protocols.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541511
New
DIBBS
Prohibited Telecommunications Equipment Screening and ReplacementThis contract requires the identification and replacement of prohibited telecommunications equipment sourced from vendors such as Huawei and ZTE across IT assets, in full compliance with DFARS 252.204-7018. The work involves conducting thorough audits to detect any covered telecommunications equipment or services that are deemed a security risk, followed by the timely removal and substitution with approved alternatives to ensure system integrity and regulatory adherence. The project must be executed within the designated place of performance at Cherry Point, North Carolina, with strict attention to timelines and audit accuracy to meet federal defense specifications. The opportunity is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside category, exclusively available to small businesses as defined by FAR 19.5, and is classified under NAICS code 541511 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is issued under the Department of Defense through the Active Devices Division. Contractors must be prepared to deliver compliant solutions under subcontract terms and demonstrate established processes for equipment verification, documentation, and secure logistics during the replacement phase.
Custom Computer Programming Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC ImplementationThis contract requires the implementation of NIST SP 800-171 cybersecurity controls to achieve compliance with CMMC Level 2 standards, focused on system hardening, robust access controls, and comprehensive audit logging across all relevant systems and environments. The effort is scoped to ensure the contractor meets the Department of Defense’s cybersecurity requirements for handling controlled unclassified information, with the ultimate goal of passing a formal CMMC Level 2 assessment. Work must be performed at Cherry Point, North Carolina, with all security measures aligned to federal guidelines and tailored to the specific infrastructure and operational context of the Active Devices Division. The contract is structured as a small business set-aside under SBA requirements, exclusively available to businesses classified as total small businesses as defined by FAR 19.5, and falls under NAICS code 541512 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all proposals must demonstrate clear expertise in NIST framework application, CMMC readiness, and defense contracting compliance. The successful vendor will be responsible for documenting control implementation, maintaining audit trails, and providing evidence of continuous compliance, all in support of securing sensitive defense-related systems at the specified location.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Safety ComplianceThe contract requires the provision of hazard warning labels and safety data sheets that fully comply with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001, ensuring proper identification and communication of chemical hazards across military supply chains. All labeling must adhere to MIL-STD-129 specifications for uniformity and durability, and the vendor must implement a robust system for managing and maintaining up-to-date safety data sheets for all hazardous materials. This subcontract is set aside entirely for small businesses as defined by the SBA and is categorized under NAICS code 541690 for other scientific and technical consulting services. The performance location is designated as Cherry Point, North Carolina, with a response deadline of July 31, 2026, and the solicitation is issued by the Department of Defense’s Active Devices Division through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight & Logistics (U.S.-Flag Vessel Requirement)The contract requires the transportation of goods via U.S.-flag vessels for overseas shipments, with a clear mandate to use American-owned and operated vessels for international freight. For domestic logistics, the contractor must coordinate the movement of cargo to DLA Distribution in Columbus, Ohio, ensuring timely and secure delivery to the specified zip code 43213. The scope encompasses end-to-end logistics planning and execution, including handling, scheduling, and compliance with U.S. maritime regulations for overseas segments. All work must align with the North American Industry Classification System code 484220, which pertains to general freight trucking, and is structured as a subcontract under the Department of Defense’s Active Devices Division. Responses are due by July 31, 2026, following a posting date of July 20, 2026, and the solicitation is accessible through the DIBBS platform for potential bidders.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Compliance & Cybersecurity SupportThe contract seeks advisory or audit support to ensure adherence to critical cybersecurity standards including DFARS 252.204-7012, NIST SP 800-171, and CMMC Level 2 requirements. The primary focus is on facilitating a thorough self-assessment process and generating comprehensive documentation to demonstrate compliance with these defense-related cybersecurity frameworks. This support is essential for organizations handling controlled unclassified information and must be delivered with precision to meet federal contractual obligations. The work is classified as a subcontract under NAICS code 541611, with performance centered in Columbus, Ohio, 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the purview of the Department of Defense’s Active Devices Division. No specific set-aside type is indicated, and the contract aims to secure expert services that will directly contribute to the contractor’s ability to validate and maintain cybersecurity compliance in alignment with Department of Defense mandates.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials. All materials must be sourced exclusively from manufacturers listed on the Qualified Products List QPL-81705 to ensure compliance with military-grade standards for ESD and EMI protection. The packaging is intended for use in sensitive electronic applications where environmental and static control are critical to mission success. This subcontract is issued by the Active Devices Division under the Department of Defense, with performance required at a location in Columbus, Ohio with the zip code 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code 326199 indicates the focus is on other rubber product manufacturing, aligning with the specialized nature of the protective packaging materials. There is no set-aside designation specified, and all qualified vendors meeting the technical and sourcing requirements are eligible to respond.
All Other Plastics Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Supply of Linear Microcircuit (NSN: 5962011999837)The contract calls for the procurement and delivery of twenty units of a linear microcircuit identified by National Stock Number 5962011999837, which must fully comply with applicable military specifications. Each unit requires proper packaging and labeling to meet defense logistics standards, ensuring traceability and readiness for military use. The finished product must be shipped to DLA Distribution in Columbus, Ohio, with the delivery address designated by the zip code 43213. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 334418 for other semiconductor and related device manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, leaving a narrow window for qualification and proposal submission. While no set-aside designation or point of contact details are provided, the requirement is specific, time-sensitive, and aligned with defense supply chain protocols, emphasizing strict adherence to technical and logistical directives for military-grade electronics.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance Services (MIL-STD-1916 Compliance)The contract requires the execution of final inspection services for capacitors under strict quality standards, specifically employing MIL-STD-1916 or ASQ H1331 sampling plans to ensure zero non-conformances and full compliance with accepted quality levels for critical, major, and minor defects. The work must be performed to exacting military and industry benchmarks, emphasizing the absolute absence of defects in every inspected unit, making precision and rigorous quality control paramount. The inspection process is non-negotiable in its requirements, leaving no room for tolerance in adherence to the specified standards. The contract is a subcontract under the Department of Defense’s Active Devices Division, with performance expected at a designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Issued under NAICS code 541330 for Engineering Services, the opportunity is open for response until July 31, 2026, with posting dated July 20, 2026. All submissions must meet the demanding compliance criteria without deviation, and bidders must be fully prepared to deliver flawless inspection outcomes aligned with defense-quality expectations.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details