Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SHROUD SEGMENT, TURB

Active
SPE4A5-26-T-336TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a SHROUD SEGMENT, TURB with NSN 2840-01-689-4843 and part number 5200T09G09, under solicitation SPE4A5-26-T-336T. A total of 73 units are required at a unit price of $73.00, with full payment due upon delivery. The item must be delivered FOB origin within 166 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and all items must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking codes applied. Packaging and palletization must conform to DLA’s procurement requirements, and delivery is directed to DLA Distribution Cherry Point in North Carolina. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and attributes must be verified at specified acceptance quality levels. The item is subject to removal of government identification if not accepted, and physical identification must be marked per RQ017. The unit of issue is each (EA), and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and the original required delivery date is October 25, 2027, with a need ship date of January 31, 2027. The contracting office is under the Department of Defense, with Kirstie Ragsdale listed as the primary point of contact.

General Info

73 SHROUD SEGMENT TURB units at $73 each, FOB origin, delivery in 166 days, MIL-STD compliant, to DLA Cherry Point.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-336T DLA Aviation Automated Simplified Acquisition

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Kirstie Ragsdale
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SHROUD SEGMENT,TURB
SHROUD SEGMENT,TURB
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
GENERAL ELECTRIC COMPANY 99207 P/N 5200T09G09
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740505 0001 EA 73.000
NSN/MATERIAL:2840016894843
DELIVERY (IN DAYS):0166
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A5-26-T-336T
SECTION B
PR: 7017740505 PRLI: 0001 CONT’D
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:01/31/2027 Original Required Delivery Date:10/25/2027
SPE4A5-26-T-336T NSN/Part Number: 2840-01-689-4843 Quantity: 73 EA Purchase Request: 7017740505QTY: 73 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
DIBBS
SCREEN
Solicitation # SPE4A6-26-T-14QR
The SCREEN item with NSN 2835-01-092-4406 is subject to strict export control under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies, and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is limited exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled technical data, and have been formally approved by DLA. Only qualified vendors meeting these criteria may respond to this solicitation. The procurement request number is 7014381247 for a quantity of fifty units, with delivery required 137 days after order placement. The solicitation number is SPE4A6-26-T-14QR, posted on August 9, 2026, with proposals due by August 17, 2026. The North American Industry Classification System code is 333611, under the Department of Defense’s ASC Commodities Division. The place of performance is in New Cumberland, Pennsylvania, zip code 17070-5002. All inquiries must be directed to Sibel Claywell at sibel.claywell@dla.mil or 804-279-6252. Proposals must be submitted via the DIBBS portal using the provided link, and no set-aside designation applies to this solicitation.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
RETAINER, COMPRESSOR
Solicitation # SPE4A7-26-T-632X
This contract pertains to the procurement of a RETAINER, COMPRESSOR with part number 5002083-01 and NSN 2840016676742, for a quantity of 323 units at a unit price of $323.00, resulting in a total contract value of $104,329. The item is classified as a Critical Application Item and must comply with stringent technical and quality requirements referenced in DLA Procurement Note L32, which supersedes higher-level contract quality standards. All technical and quality provisions are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled based on solicitation or award dates depending on acquisition size. The contractor is required to maintain supply chain traceability documentation per DLA Directive Procurement Note C03 and adhere to FAA-specific marking and airworthiness approval standards, as well as CMMC Level 2 cybersecurity self-assessment requirements. The item must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletized per DLA packaging rules. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. Delivery is due within 166 days from the contract date, with an original required delivery date of December 9, 2026, and a need ship date of January 31, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, using standardized unit of issue and transportation protocols as defined in DLAD Procurement Notes C19 and C20. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and verification levels are fixed for critical, major, and minor attributes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
BLADE SET, COMPRESSO
Solicitation # SPE4A6-26-T-14LU
This contract pertains to the procurement of a blade set for a compressor, specifically designated as non-aircraft use, with the NSN 2835-01-538-6191 and part number 10-10011-01 supplied by Vericor Power Systems LLC. The order quantity is one set, with delivery required within 20 days from the contract award, FOB origin, and inspection and acceptance to occur at the destination. The item must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, with no special marking required. Each blade must be individually protected to prevent contact or damage during transit, and packaging must adhere to DLA’s procurement packaging requirements, including prohibition of mercury or mercury-containing compounds in preservation, packaging, and marking. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and critical, major, and minor attributes must be verified at specified levels. The contract forbids intentional addition of mercury except in specific exempted applications such as functional batteries or sensors, and portable mercury-containing devices must have dual containment per NAVSEA guidelines. Shipment must be sent via the fastest traceable means, excluding parcel post, to the designated Marine Corps Base Camp Pendleton address, using government-authorized transportation protocols. The material has no shelf life requirement, and item unique identification is not mandated under DFARS provisions. The solicitation, issued by the Department of Defense’s ASC Commodities Division, was posted on August 9, 2026, with responses due by August 17, 2026, under contract SPE4A6-26-T-14LU.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
TUBE, OIL DISTRIBUTI
Solicitation # SPE4A6-26-T-14KL
The contract pertains to the procurement of two oil distribution tubes with NSN 2835-00-556-0573 and part number 366452-2, supplied by Service & Sales Inc and Honeywell International Inc, for delivery to DLA Distribution San Joaquin in Tracy, California. Delivery is required within 138 days from the award date, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the items are designated as critical application components, requiring strict adherence to technical and quality standards listed in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with all units packed in accordance with ASTM D3951 unless overridden by higher-priority DLA directives. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are verified at designated levels: VII for critical, IV for major, and II for minor. The unit of issue is each, and all packaging must be marked and labeled per military standards. The required delivery date is March 2, 2027, with a need ship date of January 3, 2027. Transportation guidelines are governed by DLAD Procurement Notes C19 and C20, and procurement is governed under solicitation SPE4A6-26-T-14KL, issued by the Department of Defense’s ASC Commodities Division, with primary point of contact Tyrone Gatewood.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
CUP, LOCKING
Solicitation # SPE7M4-26-T-326X
This contract is for the procurement of 111 units of a locking cup identified by NSN 2825-01-286-0057 under solicitation SPE7M4-26-T-326X, with a requirement for delivery within 165 days to the DLA Distribution San Joaquin facility in Tracy, California. Full and open competition applies, and all items must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes required. The product is classified as a critical application item with technical specifications referenced from Drawing 90099 1664C04 Revision D, and must be furnished FOB origin with zero variance in quantity. Strict environmental restrictions prohibit the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. All materials must adhere to the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract requires compliance with DLA transport and freight procedures C19 and C20, and the unit of issue is each (EA), with pricing and payment details tied to the purchase request 7017779993. The required delivery date is October 26, 2026, with a need ship date of February 2, 2027, under a contract awarded through the Department of Defense’s Fluid Handling Division, managed by Blake Tushar.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333611
New
Federal
Outboard Jet Motor Supply and IntegrationThe contract entails the supply and full integration of a high-performance outboard jet motor, requiring comprehensive mechanical mounting, precise control linkage installation, and a fully functional fuel system tailored for operational reliability. The work must be executed to ensure seamless compatibility with the intended vessel or platform, followed by rigorous operational testing to verify performance, safety, and durability under real-world conditions. All components and systems must meet strict technical specifications and industry standards to guarantee consistent functionality in demanding environments. This subcontract is issued by the Department of the Interior's Office of Acquisition Grants under NAICS code 333611, targeting manufacturers or integrators with demonstrated expertise in marine propulsion systems. The solicitation was posted on August 7, 2026, with responses required by August 14, 2026, at 3:00 PM. There is no specified set-aside classification, and the place of performance is not detailed, implying flexibility in execution location as long as contractual deliverables are met. The procurement seeks a proven capability to deliver and validate a complete, turnkey jet motor solution without reliance on external system dependencies.
Office Of Acquisiton Grants

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
SLED
Pump Replacement – Submersible and Sludge Pumps
City of Raleigh

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
Federal
61--Hydraulic Turbine Runner for Units A2 and N7 for H
Solicitation # 140R3026R0016
The contract solicitation 140R3026R0016 issued by the Bureau of Reclamation, Lower Colorado Regional Office in Boulder City, Nevada, seeks a contractor to furnish and install hydraulic turbine runners for Units A2 and N7 at Hoover Dam, with a period of performance spanning from December 15, 2026, to December 14, 2028. The scope of work encompasses the complete design, manufacturing, and delivery of two new turbine runners along with associated components including stationary wear rings, coupling nuts and washers, in-place machining services, air admission piping, and all required drawings, bonds, and mobilization activities. Detailed specifications, 48 pages of technical specifications, and 14 pages of engineering drawings mandate strict adherence to ASME standards including B46.1-2019, BPVC-2025, Y14.1-2020, and Y14.5-2018, with manufacturing required to use ASTM A743 Grade CF-3 material and undergo rigorous non-destructive testing protocols per ASTM A802, A903, and other relevant criteria. All components must meet exact dimensional tolerances, and any casting with more than five defects failing acceptance criteria will be rejected in its entirety. The contract imposes comprehensive compliance requirements under the Federal Acquisition Regulation, including ethical conduct provisions such as prohibitions on gratuities, contingent fees, kickbacks, and improper influence, along with mandatory adherence to a contractor code of business ethics. Offerors must submit proposals electronically by August 10, 2026, to Virginia Toledo via email, structured in three volumes covering administrative, technical, and pricing elements, with full completion of Section G.4 personnel data and submission of a detailed subcontracting plan. Payment requests must be submitted through the Treasury’s IPP system with strict formatting rules and exclusion of personally identifiable information, and the final invoice must be clearly labeled. The contractor is responsible for ensuring all employees comply with federal security protocols at Hoover Dam, including possession of government-issued identification, and must safeguard all controlled unclassified information under Reclamation Directive SLE 02-01. Prevailing wage rates apply, Buy American Act requirements govern materials, and performance and payment bonds are mandatory. Award is contingent upon meeting all solicitation terms, demonstrating responsibility under FAR Part 9, and having a fair and reasonable price, with no weighted evaluation factors specified beyond these
Lower Colorado Regional Office

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
Federal
61--CONTROL,GENERATOR, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QHA67
The contract pertains to the procurement of one unit of a generator control component, identified by NSN 7R-6110-014522467-KB, under a sole-source acquisition authorized under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition. Delivery is FOB origin, with early and incremental deliveries accepted, and all contractual documents are deemed officially issued upon electronic transmission or mailing. Only previously approved sources may respond, as the item requires specialized engineering knowledge, unique manufacturing capabilities, and proprietary technical data that are not commercially available to the Government, making qualification of alternative sources impractical within the procurement timeline. Prospective offerors not already approved must submit complete source approval documentation from the NAVSUP Weapon Systems Support brochures, detailing their experience with the same or similar items, or provide proof of a pending approval request; failure to comply will result in proposal rejection. The Government retains full discretion to award based on fleet support needs if source approval cannot be finalized in time. Solicitation responses are due by September 21, 2026, and while the procurement is not competitive by intent, all interested parties may submit capability statements within 45 days for consideration, though no competition is anticipated. Technical specifications and standards referenced are obtainable through ASSIST-Online or DODSSP, but critical engineering data such as drawings and deviation lists are not available through these channels. The contracting officer may consider proposals based on commercial items submitted within 15 days of notice, though the acquisition is not being conducted under FAR Part 12 policies.
Navsup Weapon Systems Support

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333611
New
Federal
28--HARNESS ASSEMBLY
Solicitation # SPE4A526T335R
The contract solicitation seeks a single harness assembly with NSN 2835012050728, requiring a quantity of 14 units to be delivered to W1A8 DLA DISTRIBUTION within 169 days after contract award. The approved source for this item is identified as vendor 63005 with part number 23007027, and only electronic quotes will be accepted. This is a full and open competition under RFQ SPE4A526T335R, with no set-aside restrictions, allowing all responsible sources to submit responses provided they meet the deadline. The solicitation is not available in hard copy; all information must be accessed electronically through the provided SAM.gov link, and no technical specifications, plans, or drawings are provided to offerors. The procurement falls under NAICS code 333611 and is managed by DLA Aviation under the Department of Defense, with inquiries directed to the designated point of contact via email. The solicitation was posted on August 6, 2026, and responses are due by August 14, 2026.
DLA Aviation

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
Federal
28--FILTER SYSTEM,AUXIL
Solicitation # SPE4A626Q0563
The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 15 units of the auxiliary filter system with NSN 2835015360539 under solicitation SPE4A626Q0563, which is a Small Business Set Aside for total award. The requirement is to deliver the items to DLA Distribution Cherry Point with a delivery deadline of 207 days after award, and only approved sources, identified as 0GCA0 104002-101 and 78286 70070-30316-011, are eligible. The solicitation is issued as an RFQ with no hard copies available; all submissions must be electronic and received by the deadline of August 14, 2026. No specifications, plans, or drawings are provided, and all responsible sources may respond provided their quotes are submitted on time. The NAICS code is 333611, and the point of contact for questions is listed as DibbsBSM@dla.mil, with additional information accessible via the SAM.gov link provided. The office managing this procurement is located in Richmond, Virginia.
DLA Aviation

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
Industrial Fluid Cooler SupplyThe contract calls for the procurement and delivery of one industrial fluid cooler identified by NSN 4420-01-374-7946 and part number 250400G1, which must be supplied by either Curtiss-Wright or Siemens Energy. The item is required to be new, unused, and fully compliant with all defense logistics standards, ensuring it meets the stringent performance and quality expectations of military applications. The scope is strictly limited to this single unit, with no alternatives or substitutions permitted unless explicitly authorized under the technical specifications. This is a total small business set-aside subcontract under NAICS code 333611, reserved exclusively for small businesses as defined by the SBA. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. Performance is to be fulfilled at the New Cumberland facility with a zip code of 17070-5002, under the oversight of the Department of Defense through the DDSP New Cumberland Facility. Bidders must ensure full alignment with federal contracting rules and defense logistics requirements, and all deliveries must satisfy the specified technical and compliance criteria without deviation.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
JACKING DEVICE, GEAR
Solicitation # SPE4A5-26-T-336P
The contract pertains to the procurement of a jacking device, gear, part number 785E524G01, manufactured by General Electric Company, for use on a gear assembly SPD DECR. The item is identified by NSN 2010010328949 and is solicited under contract SPE4A5-26-T-336P with a required quantity of two units, delivered in AY units. Delivery is mandatory within 166 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation methods 20 and packaging material code 01, with wrapping, cushioning, and packing standards as specified. Marking must follow MIL-STD-129 with no special marking required. The destination for delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The original required delivery date is November 16, 2027, though a need ship date is set for January 31, 2027. The contract adheres to all DLA packaging and technical requirements referenced in the DLA Master List, and all provisions for cybersecurity maturity model certification level 2 self-assessment have been incorporated. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, or marking, except for specific functional exemptions outlined in NAVSEA 5100-003D. The item must be delivered with zero quantity variance, and the supplier must ensure compliance with all applicable defense standards and regulations without exception.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
FIXTURE, ENGINE MAIN
Solicitation # SPE4A5-26-T-337N
This solicitation, SPE4A5-26-T-337N, is a total small business set-aside for a fixture, engine main, with a quantity of four units and a delivery requirement of 166 days after contract award. Offerors must submit quotation ranges due to fluctuating demand and frequent quantity adjustments on open purchase requests, as this allows the buyer to consolidate or reduce orders without administrative delays or resolicitation. Fast Pay is not applicable, and quotes submitted after the closing date must include a “No Bid” entry on DIBBS with an anticipated quote date or reason for non-submission to avoid assumptions of non-procurability. All offerors must certify they will not supply covered telecommunications equipment or services restricted under FAR 52.204-24 and DFARS 252.204-7016. Domestic sourcing restrictions under the Berry Amendment and Buy American Act apply, with the Berry threshold lowered to $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must submit required representations for eligibility under specific categories including service-disabled veteran-owned, women-owned, and economically disadvantaged women-owned small businesses. Vendors must register via the new DLA Account Management & Provisioning System (AMPS) within two months to retain access to the Vendor Shipment Module and continue shipping to DLA; users of VSM WebServices must update their internal schema. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any proposed AM-produced items will be disqualified from evaluation or award. The solicitation is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Steven Lewis as the primary point of contact.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 000000
New
DIBBS
INCLINOMETER, VEHICULAR
Solicitation # SPE4A5-26-T-337C
The contract specifies the procurement of 18 units of a vehicular inclinometer with NSN 6695-01-738-6848 and part number P/N 1017W1SPL3-9/10A from RIEKER INSTRUMENT CO., INC. under solicitation SPE4A5-26-T-337C. Delivery is required FOB origin within 166 days, with a ship date of January 31, 2027, and an original required delivery date of May 16, 2027. Quantity is strictly fixed at 18 units with zero variance allowed. Inspection and acceptance both occur at origin, governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise noted; unspecified attributes are treated as major. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA packaging requirements. The item must be identified per RQ017 and all non-accepted supplies must have government identification removed per RQ011. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, and transportation details are governed by DLAD Proc Note C19 for shipment and C20 for first destination. The unit of issue is each (EA), and the contract is subject to the revision of technical standards in effect on the solicitation issue date.

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE4A5-26-T-337E
The contract pertains to the procurement of a solenoid, electrical, identified by NSN 5945-00-150-3034 and part number 37073 from Hamilton Sundstrand Corporation, with a quantity of six units. The item is classified as a commercial item and is designated as a critical application item with no shelf life requirement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with individual unit packing marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and other attributes, following strict placement guidelines. Marking of shipments must comply with MIL-STD-129, including the special marking code ZZ for additional requirements, and palletization must follow DLA standards. Sampling requirements mandate zero non-conformances using MIL-STD-1916 or an equivalent zero-based plan, with acceptance levels set for critical, major, and minor attributes as specified. The unit of issue is EA, with a fixed quantity and zero variance permitted. Delivery is FOB origin with inspection and acceptance occurring at destination, within 399 days of contract award. The item requires no Unique Identification, per DFARS 252.211-7003(c)(1)(i). The delivery destination is DLA Distribution Cherry Point in North Carolina, with a required ship date of April 5, 2026, and an original delivery deadline of August 8, 2027. Transportation and freight instructions are governed by specific DLA procedural notes, and all documentation must align with the approved solicitation SPE4A5-26-T-337E.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PANEL, INTERFACE DEV
Solicitation # SPE4A5-26-T-336K
This contract pertains to the procurement of a PANEL, INTERFACE DEV, identified by NSN 4920-01-659-7555 and part number 8M0086566, with a quantity of five units to be delivered under solicitation SPE4A5-26-T-336K. The item is classified as a commercial off-the-shelf (COTS) product and must comply with DLA’s packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances mandatory unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item must be delivered FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Delivery is to be made via the fastest traceable means, excluding parcel post, to the specified freight address in Baltimore, MD, under a fixed price of $5.00 per unit totaling $25.00. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Physical identification and bare item marking are required per RQ017, and government identification must be removed from non-accepted supplies per RQ011. The original required delivery date is August 3, 2026, and the contract is subject to strict zero variance in quantity.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
INSTALLER, SEAL
Solicitation # SPE4A5-26-T-337S
The contract is for the supply of an installer seal with NSN 5120011507031 and part number 7070077311041, under solicitation SPE4A5-26-T-337S, with a requirement for seven units to be delivered within 20 days FOB origin. The item is designated as a critical application item and must comply with technical and quality requirements referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-2073-1E for packaging. Packaging specifications require adherence to MIL-STD-129 for marking, with no special marking codes, and palletization must follow DLA packaging guidelines. Sampling for acceptance follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. No Item Unique Identification is required per DFARS 252.211-7003(c)(1)(i). The delivery is to be made to the Commanding Officer, INS TUNIR, in Ghatskopar West, Mumbai, India, with the required delivery date set for August 13, 2026. Pricing is fixed at $7.00 per unit for a total of $49.00, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and transportation details reference DLAD procedural notes C19 and C20. The contract mandates use of the DoD authorized unit of issue and specifies the purchase request number 7017810544. Government-specific identifiers include DODIC A01, distribution code F9B, and project code TP 2. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Sean Moore as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, LANDING GE
Solicitation # SPE4A5-26-T-337W
The contract pertains to the procurement of a retainer for landing gear, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, with a quantity of one unit. Manufacturing must be performed using a metal casting process, requiring specific tooling, and suppliers are directed to contact designated DLA assistance teams for sourcing guidance related to tooling and materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances mandated unless otherwise specified, and attributes are classified with defined verification levels and AQLs. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all supplies must have government identification removed if not accepted. Delivery is FOB origin, with a 20-day lead time to meet the original required delivery date of August 13, 2026, and the final destination is the Taiwan Army's Zuoying Ammunition Sub-depot in Kaohsiung. Packaging, shipping, and freight logistics adhere to DLA-specific procedures, with the unit of issue as a single EA and no quantity variance permitted. The contract is issued under solicitation SPE4A5-26-T-337W by the Department of Defense under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326130
New
DIBBS
PLASTIC SHEET, ADHES
Solicitation # SPE4A5-26-T-336H
The contract specifies the procurement of adhesive-coated plastic sheeting identified by NSN 9330-01-581-2003, with a total quantity of three rolling units, each equal to 60 feet, for delivery within 20 days of award. The item is classified as a commercial item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ017 for physical identification and marking, RC001 for documentation during source approval, and RQ001 for tailored quality requirements applicable to both manufacturers and non-manufacturers. Packaging must adhere to DLA standards, and all materials require shelf life code H, meaning they must be stored at 70 degrees Fahrenheit with no more than 50 percent relative humidity and have a 12-month shelf life. Inspection and acceptance occur at the origin, and government identification must be removed from any non-accepted supplies. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Alternative offerors must submit a complete data package covering both the approved and alternate parts, as no data is currently available. The solicitation number is SPE4A5-26-T-336H, posted on August 9, 2026, with responses due by August 17, 2026, and performance is directed to Elizabeth City, North Carolina, under the U.S. Department of Defense, ASC Supplier Operations OEM Division.
Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-336S
The contract is for the supply of 145 units of an O-RING with NSN 5331016997328 and part number 68-1452 under solicitation SPE4A5-26-T-336S, issued by the Department of Defense through the ASC Supplier Oper OEM Division. The item must be delivered FOB origin within 122 days of contract award, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1 using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331. All packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 prohibiting bending. Mercury and mercury compounds are strictly prohibited in any preservation or packaging materials. Palletization and packaging follow DLA’s RP001 requirements, and transportation instructions are governed by DLAD proc notes C19 and C20. The delivery destination is Hill AFB, Utah, with a required ship date of December 18, 2026, and an original delivery deadline of June 8, 2027. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award date as applicable. Unit of issue is each (EA) at a unit price of $145.00, totaling $21,025.00.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BAR ASSEMBLY, STEERI
Solicitation # SPE4A5-26-T-337T
The contract pertains to the procurement of a Bar Assembly, Steering, identified by NSN 4920-01-156-0944 and part number 70700-77112-041, with a required quantity of six units to be delivered within 20 days from the contract award. The item must comply with stringent DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and marking requirements in accordance with MIL-STD-129, with no special marking designated. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise stated. The product is subject to strict configuration change management and requires a formal Engineering Change Proposal or variance request for any deviations. Technical data is proprietary and insufficient for competitive sourcing, with suggested suppliers including Grain Valley Tool & Mfg. Co. and EDR Industries Inc., both holding the same part number. The item must adhere to cybersecurity requirements under CMMC Level 2 self-assessment, and no mercury or mercury compounds are permitted in packaging or preservation. The delivery is FOB origin, with inspection and acceptance occurring at origin, and the end destination is the Commanding Officer, INS TUNIR in Mumbai, India. The sole point of contact for the solicitation is Hien-Van Trinh, and the contract was issued under solicitation number SPE4A5-26-T-337T with a response deadline of August 17, 2026, and an original required delivery date of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
CALIBRATOR, TEMPERAT
Solicitation # SPE4A5-26-T-336J
The contract pertains to the procurement of one Fluke Electronics Corp Calibrator, Temperature, model P/N 9142-A-156, identified by NSN 6685-01-718-0114, with a requirement for delivery within 20 days of contract award. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; inspection and acceptance occur at the destination point. Delivery is FOB origin, and shipment must be transported via traceable means, not parcel post, to the specified delivery address aboard the USNS HECTOR A CAFFERATA in San Diego, California. The contract prohibits any variance in quantity, with a firm requirement of exactly one unit priced at the quoted amount. The contract reference is SPE4A5-26-T-336J, with a required delivery date of August 3, 2026, and the solicitation was issued on August 9, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334512, and the point of contact is Rosa Tyiska of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE4A5-26-T-337J
This contract specifies the procurement of 72 headless, grooved pins with part number 204-001-766-001 and NSN 5315-00-077-2130, sourced from Bell Textron Inc, under solicitation SPE4A5-26-T-337J. The items must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or equivalent AQLs of 0.1, 1.0, and 4.0. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and manufacturer selection of attribute or variable inspection is permitted. The pins are designated as a critical application item and require strict adherence to packaging standards, including ASTM D3951 and mandatory compliance with MIL-STD-129 for marking and labeling, while palletization follows DLA Packaging Requirements. Unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin, with inspection and acceptance occurring at destination, and must be completed within 166 days from the contract date, with an original required delivery date of August 20, 2028, and a need ship date of January 31, 2027. Packaging must be labeled with the specified QUP of 001 and shipped to DLA Distribution Cherry Point, North Carolina, in accordance with freight and transportation procedures C19 and C20. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies as per applicable directives.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details