Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Site Preparation and Foundation Work

Active

Federal

Response Deadline08/24/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves site grading, excavation, and the construction of a reinforced concrete foundation and slab to support a modular structure, ensuring a stable and durable base for the intended installation. All work must be performed in accordance with technical specifications and industry standards for structural integrity, safety, and long-term performance, with particular attention to soil conditions, drainage, and load-bearing requirements specific to the modular unit’s design. The opportunity is classified as a subcontract under NAICS code 238910 for site preparation and foundation work, posted on August 3, 2026, with proposals due by August 24, 2026. The place of performance is in Arlington, and the contracting authority is the Department of State through its Acquisitions - Aqm Momentum office. While no set-aside type is specified, interested parties must respond by the deadline through the provided SAM.gov portal to be considered for award.

General Info

Site grading, excavation, and concrete foundation for modular structure in Arlington by August 24, 2026.

Agency

Department Of State → Acquisitions - Aqm MomentumView Agency

NAICS

238910 - Site Preparation ContractorsView NAICS

Place of Performance

Arlington, VA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 09:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of State → Acquisitions - Aqm Momentum

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of State → Acquisitions - Aqm Momentum

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Site grading, excavation, and construction of a reinforced concrete foundation and slab to support the modular structure.

Similar Contracts

Same NAICS industry code

Monterey One - Renewable Energy Improvements (CP361), Marina, CA

Solicitation # monterey-one-renewable-energy-improvements-cp361-marina-ca

GSE Construction Co., Inc. is seeking qualified subcontractors and suppliers to bid on the Monterey One Water Regional Treatment Plant Renewable Energy Improvements Project, designated as CP361, located in Marina, California. The scope of work includes extensive upgrades such as replacing digester gas piping and safety equipment, installing new level measurement devices, and adding five linear generators with associated electrical systems. The project also entails recoating digester interiors, repairing concrete structures, installing biogas conditioning and RNG upgrading equipment with a dedicated pipeline to the PG&E injection station, replacing the steam boiler with a hydronic heating system, removing existing waste gas flares and installing enclosed ones, and demolishing the Cogen facility and related infrastructure. Additional work spans civil, structural, mechanical, electrical, and demolition tasks necessary to support the renewable energy enhancements. Bidders must be prepared to meet the project’s technical requirements under applicable NAICS codes including 237310, 238110, 238120, 238190, 238320, 238220, and 238210, with specific emphasis on non-federal certification programs for Disadvantaged, Minority, and Woman Business Enterprises. The solicitation is open to interested parties who must request access to all project documents by emailing estimating@gseconstruction.com, after which a secure link will be provided for comprehensive review prior to bid submission. The deadline for responses is August 20, 2026, and all bids must align with the detailed specifications referenced in the project documentation. Primary point of contact for inquiries is Michael Demissie at GSE Construction Co., Inc.

GSE Construction Co., Inc.

POSTED

about 12 hours ago

DEADLINE

SEA S Concourse Evolution (SCE) – Bid Package 02

Solicitation # sea-s-concourse-evolution-sce-bid-package-02

The Seattle-Tacoma International Airport’s S Concourse Evolution (SCE) Bid Package 2 is a major construction solicitation led by Hensel Phelps as General Contractor and Construction Manager, targeting Small Disadvantaged Businesses under an 8A set-aside. The scope encompasses eleven critical subsystems including demolition and abatement, concrete retrofitting, structural steel and railings, fire suppression systems, site paving, runway and taxiway marking, earthwork, deep foundations, site utilities, aviation fueling systems, and baggage handling systems, with total estimated contract values ranging between $124.2 million and $143.7 million. All work must be performed at the airport site in Washington, with bids due by August 11, 2026, submitted via email to SEA-SCEBids@henselphelps.com using the prescribed bid form from the Instructions to Bidders document. The project is designated as a Project Labor Agreement (PLA) initiative requiring union labor standards, and all subcontractors must execute agreements using Hensel Phelps’ standard subcontract forms provided in the bid package. Bonding requirements mandate performance bonds for subcontracts exceeding $100,000, along with a mandatory Workers’ Compensation Waiver of Subrogation for all subcontractors. The solicitation emphasizes strict adherence to documentation protocols, including the use of approved bond forms and submission formats, though specific evaluation criteria, contract administration details, inspection standards, and period of performance remain unspecified. The NAICS code 238910 reflects the dominant scope area of demolition and abatement, aligning with the project’s heavy focus on site preparation and infrastructure redevelopment.

POSTED

about 12 hours ago

DEADLINE

NCMT BERTH 24-11 STRUCTURAL REPAIR

Solicitation # 2022-23

The contract pertains to the structural rehabilitation of the concrete marginal wharf at National City Marine Terminal Berth 24-11 in California, involving the full scope of labor, materials, equipment, and incidentals required for repair and the reinstallation of the existing shore power system as detailed in Specification No. 2022-23 and Drawing No. NC-2022-02. A wide array of specialized subcontracted scopes are included, such as AC pavement demolition and disposal, asbestos remediation, concrete coring and demolition, contaminated soil testing and removal, diving services, electrical and water utilities, environmental monitoring, LIDAR surveying, materials testing, miscellaneous metal fabrication, reinforcing steel work, storm drain utilities, treated timber disposal, and underwater pile jackets. The work is being led by Manson Construction Co. under a solicitation issued by the San Diego Unified Port District with a response deadline of August 6, 2026, and is being managed through direct coordination with Emre Erzen at the provided contact information. The contract is structured as a request for sub-bids and supplier quotes rather than a direct award, with Manson Construction actively seeking participation from qualified Small Business Enterprises across all disciplines and offering support for bonding, insurance, lines of credit, equipment access, and project scoping to facilitate SBE involvement. The place of performance is firmly established as National City, California, and the project aligns with the NAICS code 238910 for specialty trade contractors. While the overall contract value is not stated, the solicitation actively promotes participation from Disadvantaged Business Enterprises, Disadvantaged Veteran Business Enterprises, Minority Business Enterprises certified by NMSDC, and Women Business Enterprises certified by WBENC, reinforcing a strong emphasis on equitable contracting and economic inclusion consistent with federal and state transportation guidelines. Manson Construction, as an Equal Opportunity Employer, is committed to inclusive procurement and has indicated a serious intent to negotiate with qualified SBE firms to ensure broad participation in the execution of this critical infrastructure project.

Manson Construction Co.

POSTED

about 12 hours ago

DEADLINE

Port of San Diego NCMT Berth 24-11 Structural Repair, CA

Solicitation # port-san-diego-ncmt-berth-24-11-structural-repair-ca

The project involves comprehensive rehabilitation of the concrete marginal wharf at National City Marine Terminal Berth 24-11 in California, including demolition and removal of deteriorated sections of the existing concrete deck, pile caps, and waterfront appurtenances. New reinforced concrete deck construction is required, along with repair of existing piles and installation of protective pile jackets. All waterfront elements such as bull rails, wale systems, and mooring hardware including bollards must be replaced to restore structural integrity and operational functionality. Electrical work encompasses the complete removal, relocation, and reinstallation of the existing shore power system and associated infrastructure, including conduits, manholes, and related components, followed by thorough testing and commissioning to ensure full operational capability. The work must be performed in strict accordance with the contract drawings and specifications provided. This solicitation is issued by Griffith Company under the Small Business (SB) set aside category, with the NAICS code 238910, and is open only to qualified small businesses. The response deadline is August 6, 2026, and all proposals must be submitted by that date. The place of performance is in California, and primary point of contact for inquiries is Chris Mize, reachable via email at cmize@griffithcompany.net or by phone at 858-727-3511. The solicitation is posted on the SBA opportunity portal with the official reference number port-san-diego-ncmt-berth-24-11-structural-repair-ca, and all work must comply with applicable federal and local regulations governing marine infrastructure projects.

Griffith Company

POSTED

about 12 hours ago

DEADLINE

in about 20 hours

Pismo - DB Services for the Central Coast Blue AWPF, Pismo Beach, CA

Solicitation # pismo-db-services-central-coast-blue-awpf-pismo-beach-ca

GSE Construction Co., Inc. is seeking qualified subcontractors and suppliers to participate in the Design-Build construction of the Central Coast Blue Advanced Water Purification Facility in Pismo Beach, California, with a target capacity of 0.50 MGD to produce approximately 500 acre-feet of purified water annually. The project scope encompasses a comprehensive water treatment system including a 200,000-gallon equalization tank, microfiltration/ultrafiltration and two-stage reverse osmosis, UV/advanced oxidation, post-treatment stabilization, chlorination, chemical storage and feed systems, purified water storage and pumping, nearly 2,000 linear feet of HDPE conveyance pipelines, and groundwater recharge infrastructure consisting of one injection well and two monitoring wells, along with full electrical, instrumentation, SCADA, and controls systems. Bidders must hold qualifications under specific NAICS codes related to water and wastewater construction, electrical work, plumbing, specialized fabrication, and environmental services, and are required to email estimating@gseconstruction.com to receive secure access to all project documentation prior to submission. The solicitation is open to small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, Disadvantaged Business Enterprises certified under the Department of Transportation, and Minority Business Enterprises certified by NMSDC, in accordance with the SBA set-aside program. Responses are due by August 11, 2026, and interested parties must request access to the full project package before preparing their bids. Primary points of contact for questions and logistics are Michael Demissie and Juan Catano, both reachable via email at GSE Construction Co., Inc. The project is located at 966 Huber Street, Pismo Beach, CA 93433, and is intended to support regional water sustainability through advanced purification and groundwater replenishment.

GSE Construction Co., Inc.

POSTED

about 12 hours ago

DEADLINE

26-08 Cal883432B (Calhoun)

Solicitation # 26-08 Cal883432B (Calhoun)

The project titled 26-08 Cal883432B (Calhoun) involves earthwork and erosion control activities in Calhoun County, Iowa, including selective clearing, excavation, and grading totaling approximately 13,800 cubic yards, along with the placement of 2,750 square feet of tied-concrete block mat, 769 linear feet of tile drainage systems, and a water control structure. Additional work includes the installation of 31 tons of riprap and erosion stone, and the seeding of four acres of land to stabilize soil and prevent further erosion. The estimated construction cost ranges between $135,000 and $155,000, with construction activities required to be completed by November 30, 2026, and buffer seeding finalized by December 15, 2026. The solicitation is managed by the Iowa Department of Agriculture and Land Stewardship, with bids due by August 26, 2026, and inquiries directed to Tracy Blocker at the provided contact information.

Agriculture and Land Stewardship

POSTED

about 13 hours ago

DEADLINE

Veterans Memorial Auditorium Entry Planting & Irrigation Project

Solicitation # MCP 2026-04

The Veterans Memorial Auditorium Entry Planting & Irrigation Project at 10 Avenue of the Flags in San Rafael, California, encompasses a full scope of landscape enhancement activities aimed at revitalizing the entryway area. Work includes protecting existing vegetation, clearing the site, preparing and amending soil, installing mulch, and planting new trees and shrubs. The project also requires trenching and backfilling to support the installation of a new irrigation system, along with adjustments to existing irrigation infrastructure and infill planting to ensure cohesive and sustainable growth. All tasks are to be performed with attention to preserving the integrity of the surrounding environment and existing hardscapes. The contract mandates a 120-day maintenance period following completion to ensure the health and establishment of all newly planted vegetation and irrigation systems. The solicitation, issued by Marin County Parks under the County of Marin, carries the solicitation number 20260803057 and is classified under NAICS code 238910 for other construction support activities. Responses are due by August 14, 2026, at 9:00 PM Pacific Time, with inquiries directed to Tara McIntire via email or phone. The project is open to eligible bidders without a specific set-aside classification and is accessible through the BidAmerica platform for full details and submission.

Marin County Parks, County of Marin

POSTED

about 14 hours ago

DEADLINE

Corporation Yard Groundwater Monitoring Wells Project

Solicitation # 3118

The Corporation Yard Groundwater Monitoring Wells Project involves the installation of groundwater monitoring wells, soil vapor wells, and sub-slab vapor pins to assess the extent of petroleum-hydrocarbon contamination in soil and groundwater, evaluate potential vapor intrusion risks into corporation yard buildings, and determine the lateral spread of volatile contaminants, particularly PCE, in soil vapor. The scope of work includes advancing soil borings, collecting samples from soil, groundwater, and soil vapor, and restoring surface conditions after completion. All activities must be performed in strict accordance with the project plans, specifications, and directives from the Engineer to ensure accurate data collection and environmental compliance. The solicitation, numbered 20260803055, was posted on August 4, 2026, with a response deadline of September 11, 2026. The project falls under NAICS code 238910 and is managed by the City of Pittsburg, California. All work will be performed at the corporation yard located in Pittsburg, CA, with a zip code of 94565. The primary point of contact for inquiries is Tina Tan, reachable via email at ttan@pittsburgca.gov or phone at 925-252-4930. The project is not subject to any specific set-aside requirements and is open to all qualified bidders through the BidAmerica platform.

City of Pittsburg

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Sewer Manhole AdjustmentThe City of Compton Public Works Department is seeking a subcontractor to adjust existing sewer manholes to align with new road elevations following asphalt resurfacing projects in the Compton area, specifically within ZIP code 90220. This work requires precise grading and elevation adjustments to ensure manholes are properly leveled with the newly surfaced roads, maintaining safe traffic flow and preventing water accumulation or structural damage. The contract is classified under NAICS code 238910, indicating it falls within specialty trade contracting for sewer and related infrastructure work. All bids must be submitted by August 21, 2026, and the solicitation was posted on August 4, 2026. The work is intended to support ongoing municipal infrastructure upgrades and must be performed in coordination with road resurfacing schedules to ensure seamless integration and compliance with local public works standards.

City of Compton Public Works Department

POSTED

about 15 hours ago

DEADLINE

Converge Des – Ucsd Health Core And Finance Ti

Solicitation # 5764

The UCSD Health Core & Finance Tenant Improvement project, identified as Bid #5764 and titled Converge Des – UCSD Health Core and Finance TI, is a multi-floor construction effort spanning nearly 58,238 square feet across floors one through three and a portion of the fourth floor at 6256 Greenwich Drive in San Diego, California. The scope encompasses comprehensive demolition of existing finishes, partitions, ceilings, DFH, MEP components, and miscellaneous elements, followed by new construction including partitions, finishes, casework, MEP and fire protection systems, and low-voltage cabling for data, security, and audiovisual networks. Specific requirements include installation of building-standard motion sensors, new exit signage and tunnel mounts, rework of fire life safety systems to accommodate the new layout, HVAC capacity sufficient for 100 occupants, and integration of tenant CCTV infrastructure. The project demands strict adherence to environmental, safety, and regulatory standards, including compliance with the Buy Clean California Act, prevailing wage rates, patient health information protocols, and the requirement for Environmental Product Declarations (Type III, ISO 14025) for all eligible materials. All contractors and subcontractors must be registered with the California Department of Industrial Relations and comply with labor, safety, and sustainability mandates. The contract is awarded on a lowest responsive and responsible bid basis, with the contract sum determined by the lump sum base bid, adjusted by unit price items and augmented by a daily compensable delay rate multiplied by a specified multiplier. Bids must be submitted on the official University form, accompanied by a bid security equal to 10% of the base bid, in the form of either a bid bond or certified check payable to The Regents of the University of California. The solicitation mandates submission through a sealed envelope delivered physically by the deadline of August 14, 2026, with electronic, telephonic, or facsimile submissions expressly prohibited. Contractors are required to provide performance and payment bonds, commercial general liability insurance with limits of $1 million per occurrence and $2 million aggregate, workers’ compensation as required by California law, employer’s liability coverage of $1 million per employee and accident, and builder’s risk property insurance. Additional requirements include submission of key personnel documentation, certified payroll records, daily progress reports, and compliance with bonding and insurance exhibits such as performance bonds, payment bonds, and certificates of insurance. Substantial completion must be achieved within 182 days of the Notice to Proceed, with final completion

University of California, San Diego

POSTED

about 15 hours ago

DEADLINE

Demolition, Removal, and Remediation

Solicitation # 6913G626Q300044

The Contractor is required to perform demolition, removal, and remediation services at the GFL VOR facility in Glens Falls, New York, under a firm-fixed-price contract with a period of performance from August 10, 2026, to September 30, 2026. The scope includes abating approximately 850 square feet of asbestos-containing floor tiles and mastic, 2,100 square feet of asbestos-containing roofing, and two presumed asbestos-containing fire doors, as well as removing a lead-paint-containing TACAN antenna and support pole. The contractor must demolish a 36 ft. x 36 ft. equipment building and its attached radome, remove all associated foundations, site improvements including shelters, fencing, wooden power poles, electrical equipment, underground wiring and piping, and restore the site by excavating foundations to at least 1.5 feet below grade, backfilling with suitable material, and spreading a uniform 0.5-foot layer of fill over disturbed areas. The work must comply with all applicable federal, state, and local regulations, adhering to the most stringent requirement where conflicts exist. The contractor must submit a draft Demolition, Removal, and Restoration Work Plan within 10 business days after a kickoff meeting, which must detail technical methods, schedules, waste characterization sampling protocols, disposal facility identification, required permits, a Site Safety and Health Plan, and a Risk Management Plan. After a five-day government review period, the contractor must address feedback and submit a final work plan within five business days. All permits must be obtained by the contractor and appended to the final plan, and site close-out documentation is required. The contractor must possess required certifications for asbestos abatement and other specialized work, and all proposal submissions must include a completed SF-1449, a two-page technical narrative demonstrating competence, and a detailed firm-fixed-price breakdown covering labor, equipment, laboratory analysis, trucking, disposal, surveys, and permits, all submitted via email to roland.regan@dot.gov no later than August 4, 2026. The award will be made on a best-value basis, selecting the offeror with the lowest price among those submitting an acceptable technical proposal. The contract includes numerous FAR and TAR clauses governing whistleblower rights, small business set-asides, labor standards, cybersecurity, data protection, Buy American requirements, electronic invoicing via iSupplier, compliance with DOT safeguarding controls, seat belt use policies, and

6913G6 Volpe National Transportation System Cntr

POSTED

about 16 hours ago

DEADLINE

in about 14 hours

Y--RPFO-NCA VAULT TOILET AND REMOVAL

Solicitation # 140L1726Q0018

This solicitation, numbered 140L1726Q0018, is a small business set-aside for the removal of an existing Gunnison model CXT vault toilet and installation of a new single-vault precast concrete toilet building at a Bureau of Land Management site in Grants, New Mexico. The requirement is issued as a request for quote under simplified acquisition procedures, with a firm fixed price contract type, and is reserved exclusively for small business concerns as defined by NAICS code 238910. The period of performance spans from August 24, 2026, to October 30, 2026, with performance expected to commence immediately upon notice to proceed and be completed within 60 calendar days. The new toilet structure must meet exacting aesthetic and functional specifications, including dimensions of 6’6” x 14’8”, barnwood wall texture, cedar shake roof texture, oatmeal buff and rich earth coloration, ADA compliance, gabel roof, standard steel door, and integrated solar lighting and ventilation components. The contractor is responsible for all site preparation, removal and proper disposal of the existing structure and concrete, backfilling and reconfiguration of the vault, installation of the new unit, and compliance with all applicable codes and regulations. The contractor must adhere to the Uniform Building Code, International Building Code, New Mexico State Statutes, OSHA, DEP, EPA, and ADA requirements, with the most stringent provisions taking precedence in case of conflict. Wage rates are governed by the Davis-Bacon Act for Cibola County (NM20260031), and additional regulatory obligations include compliance with Executive Order 14026 minimum wage standards, paid sick leave requirements, pollution prevention standards, sustainable product guidelines, and prohibitions against discriminatory DEI practices. A 100% payment bond or irrevocable letter of credit must be provided within 10 calendar days following award, covering the full contract value plus a one-year period. Offers must be submitted via email to the designated point of contact on or before July 28, 2026, and must include a signed SF-1442, acknowledgment of Amendment 0002, responses to Sections L and M, and a detailed price schedule broken into five cost elements. Proposals must be organized into two volumes—one for pricing and one for technical approach and past performance, with the technical narrative limited to five

New Mexico State Office

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of State → Acquisitions - Aqm Momentum

Same awarding agency

Security and Access Control SystemsThe contract seeks the installation of comprehensive security systems including electronic access control, surveillance cameras, intrusion detection, and monitoring infrastructure to ensure secure facility operations at a location in Arlington. The work falls under NAICS code 541715 and is structured as a subcontract opportunity posted on August 3, 2026, with proposals due by August 24, 2026. The contracting entity is the Department of State through its Acquisitions - Aqm Momentum office, indicating this effort supports federal security requirements. The systems must meet high standards for reliability and integration to safeguard critical infrastructure, with all work expected to be performed on-site in Arlington. Subcontractors must be prepared to deliver turnkey solutions that include equipment, installation, testing, and ongoing monitoring readiness, aligning with stringent federal security protocols.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Fire Protection and Suppression SystemsThe contract pertains to the design and installation of fire suppression systems tailored for indoor environments containing combustible materials and electrical systems, ensuring compliance with safety standards in high-risk settings. The work is scoped under NAICS code 238290, indicating specialized construction services for fire protection, and is issued as a subcontract by the Department of State under the Acquisitions - Aqm Momentum office. Performance is required in Arlington, with the solicitation posted on August 3, 2026, and responses due by August 24, 2026, at 9:00 PM. The contract does not specify a set-aside type or point of contact, and the place of performance location lacks detailed address information beyond the city. Interested parties must submit proposals through the provided SAM.gov link prior to the deadline to be considered for award.

Other Building Equipment Contractors

POSTED

DEADLINE

Electrical and Communications SystemsThe contract involves a full electrical system installation encompassing lighting, power distribution, communications cabling, and seamless integration with range control and safety systems, ensuring comprehensive functionality and operational reliability. The scope requires precise coordination between electrical infrastructure and mission-critical safety and control systems to meet stringent performance standards in a secure environment. The opportunity is classified as a subcontract under NAICS code 238210, issued by the Department of State through Acquisitions - Aqm Momentum. The solicitation was posted on August 3, 2026, with a firm response deadline of August 24, 2026, at 9:00 PM. The work is to be performed in Arlington, with no specific set-aside designation indicated. Interested parties must respond through the provided SAM.gov link before the deadline to be considered for award.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Bullet Trap Supply and InstallationThe contract calls for the supply and installation of bullet traps, including deceleration chambers, rubber berms, and steel deflection systems, all rated to handle specific firearm calibers. The work is required to meet exact technical specifications to ensure safety and compliance in high-risk shooting environments, with installation to be performed at the designated location in Arlington. This is a subcontract opportunity under the NAICS code 332312, which pertains to firearm and ammunition manufacturing, indicating that the contractor must have specialized expertise in ballistic containment systems. The solicitation was posted on August 3, 2026, with proposals due by August 24, 2026, allowing potential vendors approximately three weeks to prepare and submit their bids. The contracting agency is the Department of State through its Acquisitions - Aqm Momentum office, underscoring the federal nature and security-sensitive context of the project. All work must be executed at the specified place of performance, and compliance with safety and performance standards is critical.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Automated Target Retrieval and Control SystemsThe contract seeks the supply and integration of automated target retrieval and control systems, encompassing track mechanisms, control software, and a dedicated user interface to be installed in the range control room. The system must enable precise, reliable, and safe operation of target retrieval functions, supporting advanced training and testing environments with minimal manual intervention. All components must be fully integrated to ensure seamless communication between hardware and software, with the user interface designed for intuitive operation by trained personnel in a high-stakes operational setting. The work is governed as a subcontract under NAICS code 334511, pertaining to electronic instrumentation manufacturing, and is managed by the Department of State through its Acquisitions - Aqm Momentum office. Performance is required in Arlington, with submissions due by August 24, 2026. The solicitation is open for responses from qualified vendors capable of delivering fully tested and compliant systems, with emphasis on reliability, cybersecurity, and long-term maintainability. Timing and coordination with existing range infrastructure are critical, and proposers must demonstrate proven experience in similar automated control systems within defense or aerospace domains.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Lead Ventilation and Air Filtration SystemsThe contract requires the design, supply, and installation of ventilation and air filtration systems specifically engineered to meet OSHA and NIOSH standards for controlling lead particulate exposure in a firearms training facility located in Arlington. The systems must ensure sustained indoor air quality by effectively capturing and removing airborne lead particles generated during live-fire training, protecting personnel from health hazards associated with prolonged exposure. All components must be fully compliant with federal occupational safety guidelines and integrated to operate reliably under continuous use in a high-traffic, high-contamination environment. This is a subcontract opportunity issued under NAICS code 238220, with a response deadline of August 24, 2026, and a posted date of August 3, 2026. The contracting entity is the Department of State through Acquisitions - Aqm Momentum, and the work must be performed at the specified location in Arlington. The scope emphasizes technical precision, regulatory adherence, and long-term performance, requiring proven expertise in industrial ventilation, lead abatement, and air quality management systems tailored for firearms training operations.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Ballistic Wall and Ceiling InstallationThe contract seeks the supply and installation of ballistic-rated walls and ceilings capable of withstanding live-fire exposure to 5.56 NATO, .45 ACP, and 12-gauge slug rounds, ensuring protection in high-threat environments. Work is required to be performed in Arlington, with all materials and installations meeting stringent ballistic performance standards to safeguard personnel and facilities during active shooting scenarios. This is a subcontract opportunity under NAICS code 238990, issued by the Department of State through Acquisitions - Aqm Momentum, with responses due by August 24, 2026. The project demands precise engineering, certified materials, and expert installation to guarantee compliance with verified ballistic resistance thresholds, and bidders must demonstrate capability to deliver and deploy systems that meet or exceed the specified threat levels.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Commissioning and Operator TrainingThe contract entails comprehensive system commissioning, performance testing, and operator training for all technical and safety systems at a specified location in Arlington. The work requires the successful bidder to ensure that all systems are properly installed, integrated, and validated to meet operational requirements, followed by rigorous performance testing to confirm reliability and safety standards. A critical component of the contract is the delivery of tailored training to range operators, enabling them to effectively and safely manage the systems under routine and emergency conditions. The endeavor demands expertise in technical verification, operational validation, and instructional delivery to achieve full system readiness. This subcontract is solicited under the NAICS code 541690, indicating it falls within other scientific and technical consulting services. It is issued by the Department of State through Acquisitions - Aqm Momentum, with a response deadline of August 24, 2026. The contract does not specify any set-aside provisions, and no point of contact information is provided. All work must be performed at the designated place of performance in Arlington, and interested parties must submit responses prior to the stated deadline to be considered.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Modular Building Design and ConstructionThe contract entails the turnkey design and construction of a modular 10-lane indoor firearms training facility, encompassing full architectural and engineering integration, structural assembly, and the installation of ballistic-rated components to meet rigorous safety and performance standards. The project requires end-to-end execution from conceptual planning through final construction, with all systems designed to support high-volume, secure weapons training in a controlled environment. The facility must be prefabricated and assembled as a modular unit, ensuring efficient deployment while maintaining structural integrity and compliance with ballistic containment specifications. The solicitation is classified as a subcontract under NAICS code 238120, reflecting specialization in specialty trade contracting for building construction. It is issued by the Department of State under Acquisitions - Aqm Momentum, with performance expected to occur in Arlington. The response deadline is set for August 24, 2026, and the opportunity was posted on August 3, 2026, indicating a three-week window for qualified subcontractors to submit proposals. No set-aside status is specified, and all submissions must align with the technical scope, timeline, and location requirements outlined in the solicitation.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Insurance and Risk Management ComplianceThe contract requires the provision of comprehensive insurance coverage to ensure full compliance with both U.S. contractual obligations and Malawian legal standards. Required policies include general liability, auto liability, workers’ compensation, and employer’s liability insurance, all of which must be maintained at levels sufficient to mitigate risk and meet regulatory requirements in the place of performance, Lilongwe, Malawi. The insurance terms must align with the dual jurisdictional framework, ensuring that coverage is valid and enforceable under local Malawian law while also satisfying the expectations of the U.S. Department of State as the contracting agency. This is a subcontract awarded under NAICS code 524298, with a posted date of August 3, 2026, and a response deadline of August 24, 2026. The procurement is managed by Acquisitions - Aqm Momentum under the U.S. Department of State, and performance is exclusively tied to Lilongwe, Malawi. All participants must ensure their insurance programs are current, properly documented, and capable of being verified upon request, with no flexibility in meeting the mandated coverage types or jurisdictional compliance standards. Failure to fulfill these insurance requirements will result in disqualification or contract noncompliance.

All Other Insurance Related Activities

POSTED

DEADLINE

Security Systems Integration and MonitoringThe contract entails the comprehensive maintenance and operation of electronic security systems at the U.S. Embassy in Lilongwe, covering critical infrastructure such as closed-circuit television surveillance, x-ray baggage inspection, access control systems including GEMS and CAMS, and explosive detection technologies at all entry points. These systems must be consistently monitored, serviced, and upgraded to ensure uninterrupted functionality and compliance with federal security standards, with the contractor responsible for both preventive and corrective maintenance as well as rapid response to system failures or threats. The work is classified as a subcontract under NAICS code 811211, with performance strictly localized to Lilongwe, Malawi, and requires alignment with Department of State protocols for diplomatic facility security. The solicitation was posted on August 3, 2026, and responses must be submitted by August 24, 2026, with no set-aside restrictions indicated. The contracting entity is the Department of State through its Acquisitions - Aqm Momentum office, and while no point of contact details are provided, interested parties must engage through the official SAM.gov portal link. The scope demands technical expertise in integrated security electronics, reliability under high-stakes conditions, and adherence to U.S. government security frameworks, requiring the contractor to maintain trained personnel on-site and demonstrate proven experience with similar diplomatic missions. All system operations must ensure continuous threat detection and access control integrity without compromising embassy operations or personnel safety.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Radio and Communication Network OperationsThe contract pertains to the operation and maintenance of a secure radio communication network dedicated to embassy security operations in Lilongwe, Malawi. This includes the full lifecycle management of the network, from acquisition of necessary radio spectrum licenses to ongoing technical support and system maintenance to ensure continuous, secure, and reliable communications. All activities must comply with U.S. Department of State security standards and local regulatory requirements in Malawi, ensuring the network remains resilient and protected against interference or unauthorized access. The contractor is responsible for sustaining network integrity, responding to technical incidents, and providing timely support to embassy personnel relying on this critical infrastructure. This subcontract is issued under NAICS code 517210, which classifies it under Wired and Wireless Telecommunications Carriers, reflecting its focus on telecommunications services. The opportunity was posted on August 3, 2026, with a response deadline of August 24, 2026. Performance is exclusively located in Lilongwe, Malawi, where the contractor must be fully prepared to operate within the local environment, including logistical, regulatory, and security considerations. The contract is managed by the Department of State’s Acquisitions - Aqm Momentum office, underscoring its importance to diplomatic security missions. Successful bidders must demonstrate proven experience in deploying and maintaining encrypted, classified-grade communication systems in high-risk, overseas environments.

Wireless Telecommunications Carriers (except Satellite)

POSTED

DEADLINE