SKID, PLATFORM

SKID,PLATFORM
SKID, PLATFORM
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ALL WOODEN PALLETS AND WOOD CONTAINERS PRODUCED
ENTIRELY OR IN PART OF NON-MANUFACTURED WOOD
SHALL BE CONSTRUCTED FROM HEAT TREATED
(HT TO 56 DEGREES CENTIGRADE FOR 30 MINUTES)
MATERIAL AND CERTIFIED ACCORDINGLY BY AN
ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN
LUMBER STANDARDS COMMITTEE (ALSC) IN ACCORDANCE
WITH NON-MANUFACTURED WOOD PACKING POLICY AND
NON-MANUFACTURED WOOD PACKING ENFORCEMENT
REGULATIONS. ON PALLETS, THE MARKING SHALL BE
APPLIED TO THE STRINGER OR BLOCK ON OPPOSITE
SIDES AND ENDS OF THE PALLET AND BE CONTRASTING
AND CLEARLY VISIBLE. ON CONTAINERS, THE MARKING
SHALL BE APPLIED ON A SIDE OTHER THAN THE TOP OR
BOTTOM, CONTRASTING AND CLEARLY VISIBLE.
OAK AND CHESTNUT WOOD SHALL BE BARK FREE AND
SQUARE EDGED SO THAT NONE OF THE NATURAL ROUNDED
SURFACE TISSUES REMAIN, OR BE BARK FREE AND HAVE
A MOISTURE CONTENT NO GREATER THAN 20 PERCENT.
THE CONTRACTOR IS RESPONSIBLE FOR PERFORMING AN
INSPECTION OF EACH SHIPMENT TO ASSURE COMPLIANCE
WITH THESE REQUIREMENTS.
SPE8EF-27-T-0321
SECTION B
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 12420036 REVISION NR A DTD 05/09/2003 PART PIECE NUMBER: PN 12420036
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12420036 REVISION NR DTD 03/15/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018912294 0001 EA 2,841.000
NSN/MATERIAL:3990014846521
DELIVERY (IN DAYS):0149
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE8EF-27-T-0321
SECTION B
PR: 7018912294 PRLI: 0001 CONT’D
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:04/26/2027 Original Required Delivery Date:05/05/2027
SPE8EF-27-T-0321 NSN/Part Number: 3990-01-484-6521 Quantity: 2,841 EA Purchase Request: 7018912294QTY: 2841 Delivery: 149 days ADO