This Government Contract opportunity from Department Of Defense was posted on October 3, 2011. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Skid Steer - Melby

Awarded

W912ES-11-T-0105Federal

Submission Closed09/20/2011, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8EE-27-T-0379

Solicitation SPE8EE-27-T-0379 is a Request for Quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manu and Con, for the procurement of cable reels under NSN 3895-01-513-6582. The requirement consists of two line items totaling five units, with two units destined for DLA Distribution Barstow in California and three units for DLA Distribution Albany in Georgia. The delivery timeframe is specified as 66 days after order, with original required delivery dates set for February 27, 2027, and specific need ship dates ranging from October 2026 to April 2027. Terms are established as FOB Origin, with inspection and acceptance occurring at the destination. The procurement is not a small business set-aside and falls under NAICS code 333120. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. Additional requirements include marking and labeling per MIL-STD-129 and palletization according to RP001. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Truck-Mounted SpreadersThis subcontract agreement involves the procurement and delivery of truck-mounted spreaders intended for prime contractors working on New Mexico Department of Transportation vehicle procurement projects. The scope of work specifically covers equipment used for the application of seal coatings, aggregates, and ice control materials, falling under Commodity Code 76566 and NAICS code 333120. The contract is managed by the state of New Mexico, with a posting date of October 29, 2026, and a response deadline set for November 27, 2026. The primary objective is the successful delivery of completed spreading equipment to support state transportation infrastructure and maintenance efforts.

POSTED

DEADLINE

Supply of Vehicle-Mounted Snow Plows and Snow WingsThis subcontract agreement involves the procurement and delivery of vehicle-mounted snow plows and snow wings for prime contractors working on New Mexico Department of Transportation vehicle procurement projects. The scope of work is specifically focused on equipment categorized under Commodity Code 76561, falling under NAICS code 333120. The opportunity was posted on October 29, 2026, with a response deadline set for November 27, 2026. Managed by the state of New Mexico, the contract ensures that necessary snow removal equipment is supplied to support transportation infrastructure projects across the region.

POSTED

DEADLINE

5P207-260743 – Aerial Lift

Solicitation # WS5920009719

Public Works and Government Services Canada, acting on behalf of Parks Canada, is soliciting proposals for the acquisition and delivery of an aerial lift to be located in Chambly, Quebec. This federal procurement opportunity is governed by the Canadian Free Trade Agreement and is categorized under NAICS code 333120. Interested parties must submit their responses by the deadline of November 9, 2026. The solicitation, identified by number WS5920009719, is managed by the Department of Public Works and Government Services, with Stephen Phan serving as the primary contracting authority.

Department of Public Works and Government Services

POSTED

DEADLINE

Supply of Moldboard End BitsThis subcontract involves the supply of 46 moldboard end bits for prime contractors supporting Department of Defense hardware procurement projects through the Defense Logistics Agency. The selected provider is responsible for manufacturing or sourcing parts that strictly adhere to the technical specifications for NSN 3805013455968, with delivery coordinated via the First Destination Transportation program to a government destination in Texarkana, Texas. To be eligible for this requirement, contractors must possess a valid CAGE code and Unique Entity Identifier. The project falls under NAICS code 333120, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

RETRACTOR ASSEMBLY, WEA

Solicitation # SPE8EF-27-T-0173

Solicitation SPE8EF-27-T-0173 is a fixed-price request for quotations issued by the Defense Logistics Agency for the procurement of 119 units of Retractor Assembly, Weapon Cradle Adapter, identified by NSN 1740-01-140-7583. This is a critical application item that must adhere to specific source control drawings, requiring offerors not listed as approved sources to obtain OEM approval. The contract specifies a delivery period of 145 days, with a need ship date of April 4, 2027, and an original required delivery date of October 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement incorporates stringent technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Compliance requirements include CMMC Level 2 Self-Assessment, NIST SP 800-171 DoD assessment requirements, and adherence to the Buy American Act and Berry Amendment. Administrative processing, including invoicing and receiving reports, must be conducted through the Wide Area WorkFlow system. This solicitation is not a small business set-aside.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

MOIL POINT, PAVING BREA

Solicitation # SPE8EE-27-T-0362

Solicitation SPE8EE-27-T-0362 is a request for quotations issued by DLA Troop Support, Construction and Equipment Manu and Con for the procurement of one Moil Point, Paving Breaker, identified by NSN 3820-01-657-7467. The requirement is for a quantity of one unit with a delivery timeframe of 20 days after award and an original required delivery date of October 23, 2026. Shipping is established as FOB Origin, with the freight shipping address located at Camp Gruber in Braggs, Oklahoma. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must comply with RP001. Invoicing and payment processing are required through the Wide Area WorkFlow system. The solicitation is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and prohibitions on covered defense telecommunications equipment. Notably, the government will not evaluate or award to offers utilizing additive manufacturing processes, and a price evaluation preference may be applied to HUBZone concerns.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0181

Solicitation SPE8EF-27-T-0181 is a request for the procurement of two Rear Panel Assemblies, identified by NSN 1740-01-498-6196 and Pacific Consolidated Industries part number 791592-001. Issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, the requirement is categorized under NAICS code 333120. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a need ship date of April 26, 2027, and an original required delivery date of May 27, 2027. The delivery timeline is specified as 167 days after receipt of order, with shipping terms set as FOB Origin. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951. Packaging must comply with RP001 and MIL-STD-129 for marking and labeling. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations must be submitted via the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0296

Solicitation SPE8EE-27-T-0296 is issued by the Defense Logistics Agency for the procurement of 46 units of moldboard end bits, identified by NSN 3805-01-345-5968. The contract is managed by the Department of Defense under NAICS code 333120 and utilizes First Destination Transportation to reduce costs via Government-Arranged Transportation. Delivery is required within 167 days after receipt of order, with a designated delivery point at DLA Distribution Red River in Texarkana, Texas. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and the use of manufacturer corrosive resistant paint for preservation. Technical requirements are further governed by the DLA Master List of Technical and Quality Requirements. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, to the DLA Troop Support office in Philadelphia.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

TOWBAR, TRAILER, MUNI

Solicitation # SPE8EF-27-T-0205

Solicitation SPE8EF-27-T-0205 is a request for the procurement of 22 units of munitions trailer towbars, identified by NSN 1740002548482. Issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, the requirement specifies a delivery timeframe of 167 days after order, with an original required delivery date of April 15, 2027. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must comply with RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and registration in the System for Award Management. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, DFARS 252.204-7012 for safeguarding covered defense information, and various socioeconomic representations. All quotations must be submitted through the DLA Internet Bid Board System by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0182

Solicitation SPE8EF-27-T-0182 is a request for quotations issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 10 units of Filter Assembly, identified by NSN 1740-01-498-6164 and part number 791551-001. The requirement is categorized under NAICS code 333120. The need ship date is April 26, 2027, with an original required delivery date of May 8, 2027, and a delivery timeframe of 167 days after order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging following ASTM D3951 and palletization complying with RP001. Marking and labeling must align with MIL-STD-129. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, as well as the Buy American Act and Berry Amendment for domestic material preferences. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, to the issuing office in Philadelphia, Pennsylvania.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Vacant Building DemolitionThis subcontract opportunity involves the complete demolition of a vacant building located at 25 High Road in Newbury, Massachusetts. The selected contractor will be responsible for tearing down the structure and clearing all demolition debris from the site using heavy machinery, such as loaders and excavators with shears, to deliver a fully cleared lot. Eligible bidders must possess a qualified Massachusetts contractor license for demolition services. The project is associated with the Town of Newbury, and interested parties must submit their responses by November 12, 2026.

Town of Newbury

POSTED

2 days ago

DEADLINE

in 13 days

AI Contract Overview

This contract, solicitation number W912ES-11-T-0105, requires a contractor to supply and deliver a Track Bobcat T770 compact track loader or an equivalent model to the Lac qui Parle Project Office in Watson, Minnesota. The equipment must feature a 92 hp Tier III diesel engine, a 3,475 lbs operating capacity, and a comprehensive set of safety and operational specifications, including ROPS/FOPS protection and a 12-month unlimited hour warranty. Additionally, the loader must include Option Package A91 or an equivalent, providing a sound-reduction cab with climate control, high-flow hydraulics, and a power coupler. The bid price must account for the trade-in value of a 2005 Bobcat T250 Loader and cover all costs associated with transporting and unloading the new equipment. Delivery is required no later than 90 days after the receipt of the order, with shipments arriving between 8:00 A.M. and 3:00 P.M. on business days. The contractor is responsible for notifying the government at least 24 hours prior to delivery. This procurement is managed by the Department of Defense through the Endist St Paul office.

General Info

Agency

Department Of Defense → W07V Endist St Paul

Contract Value

$38,456.44

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

US Army Corps of Engineers Lac Qui Parle Project Office 9055 1st St W, WATSON, MN, 56295, USA

Set-Aside

NONE

Awardee

KIPPER TOOL COMPANY

Award Issued Date

09/20/2011, 12:00:00 AM UTC

Documents

11-T-0105-0002+skidsteer+amendment.pdf

11-T-0105+skidsteer-melby.docx

11-T-0105+skidsteer+solicitation.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedAug 17

Combined Synopsis

Notice updatedSep 11

Response deadline changed from Sep 2, 2011 to Sep 16, 2011. The notice description changed.

AwardedSep 20

Contract was awarded

Submission Closed

09/20/2011, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W07V Endist St Paul

Contacts2 people available

OfficeSAINT PAUL, MN, 55101-1323, USA

Organization / AgencyDepartment Of Defense → W07V Endist St Paul

Office AddressSAINT PAUL, MN, 55101-1323, USA

Contacts

Christopher G. DakeLieutenant Colonel

contact@example.gov

+1 (555) 000-0000

Kevin P. HenricksCONTRACTING OFFICER

contact@example.gov

+1 (555) 000-0000

Full Description

SKID LOADER for LAC QUI PARLE PROJECT SCOPE OF WORK 17 AUGUST 2011 Changes are in Bold/Italics (see paragraph 4 delivery) 1. SCOPE The contractor shall supply and deliver a skid loader with bucket attachment to Lac qui Parle Project Watson, MN. 2. SPECIFICATIONS The Skid loader shall be a Track Bobcat T770 compact track loader or equal by meeting or exceeding the following requirements: 92 hp interim Tier III Diesel Engine Liquid Engine Cooled Turbocharged diesel Engine block heater Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) 17.7" wide rubber tracks Glow Plugs Lift Arm Support Horn Auxiliary high flow Hydraulics: Variable Flow 3,475 lbs operating capacity (SAE) Backup alarm Lights, Front, Rear, and dome Operator Cab shall include electrical power port, rear windows, parking brake, seat bar and belt Engine/Hydraulic Systems Shutdown Instrumentation: Hour meter, Engine Temperature and Fuel Gages, Warning Lights Warranty: 12 months, unlimited hours The Skid loader shall include OPTION PACKAGE A91 or equal meeting the following requirements: Sound reduction cab enclosure with heat and air conditioning High Flow hydraulics Hydraulic bucket positioning Power Bobtach power coupler - (able to lock attachments from inside cab) Deluxe instrument panel Keyless Start Attachment 7 pin electrical control kit Two speed travel with 3 point belt roller suspension system Adjustable suspension seat, top and rear Cab Accessory Harness 3. TRADE-IN The bid price shall include a trade-in value for a 2005 Bobcat T250 Loader with the bucket. The Point of Contact for inspecting the Bobcat to trade in is Randy Melby, +1 (555) 000-0000. 4. DELIVERY DUE DATE The skid loader and attachments shall be delivered NLT 90 days ARO. 5. SHIPMENT The bid price shall include the cost of transporting and unloading to the destination site. Shipment shall be prepaid and made at the Contractor's expense. Shipment address and point of contact is: U.S. Army Corps of Engineers Lac qui Parle Project Office 9055 1st St. W. Watson MN 56295 Attn: Randy Melby +1 (555) 000-0000 The Contractor shall notify the government of the shipment at least 24 hours before the scheduled delivery date. Delivery shall be between the hours of 8:00 A.M. and 3:00 P.M. Monday thru Friday, except on Government holidays. Any delivery arriving after 3:00 P.M. will not be accepted by Government personnel until the next work period as designated above.

More opportunities from Department Of Defense → W07V Endist St Paul

Same awarding agency

Skid Steer - Melby

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

Contract not broken down yet

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → W07V Endist St Paul

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open