Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on September 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

SLEEVE, DIRECTIONAL CON

Closed
SPE4A7-26-T-749PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413
New
Federal
17--FITTING,HOLD BACK,A
Solicitation # N0038325RC335
This contract involves the procurement of 278 units of a specific part identified as NSN 7R-1720-015334867-EY, TDP VER 011, with delivery FOB origin. The part is classified as flight critical and requires prior government source approval due to its unique design capabilities, engineering expertise, and manufacturing or repair knowledge held by the approved sources. These sources retain essential data rights and technical information that are not readily available to the government, making it necessary for any alternate sources to undergo a qualification process approved by the relevant government engineering authority before being eligible to supply the part. The contract emphasizes that only previously approved sources are solicited, and the approval process is time-consuming, often preventing delays in award decisions. Potential suppliers must submit detailed technical data and documentation demonstrating their capability to produce or repair the item, in accordance with NAVSUP WSS procedures. Failure to provide complete source approval information will result in disqualification from consideration. The government intends to negotiate solely with one source under FAR 6.302-1, but all responsible sources may express interest and submit capability statements within a specified response period. The procurement is managed by NAVSUP Weapon Systems Support in Philadelphia, PA, and interested parties can access relevant specifications, standards, and documentation through designated government sources. The solicitation also notes that the market research indicates the government is not applying FAR Part 12 policies for this acquisition, but interested commercial entities can demonstrate their capability to meet the requirements within 15 days of the notice.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in 1 day
NAICS: 336413
New
Federal
MH-65 SPARE PARTS
Solicitation # 70Z03827QB0000010
Solicitation 70Z03827QB0000010 is a request for quotation issued by the United States Coast Guard Aviation Logistics Center for the procurement of new manufactured commercial spare parts for the MH-65 helicopter, specifically the MGB Tach Bush (NSN 01HS31976). The requirement is intended as a sole source acquisition from Airbus Helicopters, Inc., as they are identified as the only source capable of providing genuine Original Equipment Manufacturer parts with the necessary traceability. The initial order is for 10 units, with a tailored option for the government to unilaterally increase the quantity by up to 20 additional units, for a maximum of 30, by December 31, 2026. Due to vendor requests, the offer due date has been extended to November 16, 2026, at 2:00 PM EST. To ensure aircrew safety and flight quality, the government mandates that all parts be new, FAA-approved, and accompanied by a Certificate of Conformance and a complete, auditable paper trail tracing ownership back to the OEM, Airbus Helicopters France. No substitute or alternate parts will be accepted. Award will be based on a determination of fair and reasonable pricing and technical acceptability. Deliveries are designated as F.o.B. Destination to the Aviation Logistics Center, with strict packaging requirements prohibiting materials such as Styrofoam and peanut packaging to prevent damage and corrosion during storage. Offerors must hold their quoted prices firm for 60 calendar days.
Aviation Logistics Center (ALC)(00038)

POSTED

about 3 hours ago

DEADLINE

in 14 days
NAICS: 336413
New
Federal
Hill Industry Day Opportunities
Solicitation # Hill_Industry_Day_Opportunties
The Hill Industry Day Opportunities is a sources-sought solicitation issued by the Department of Defense, specifically the F3YCCF 448 Scmw, with a response deadline of December 4, 2026. This initiative focuses on market research and procurement opportunities for a wide array of aircraft and space components under NAICS code 336413. The scope of work spans multiple locations, including Hill, Tinker, and Robins Air Force Bases, and covers requirements for aircraft such as the A-10C, B-1, B-2, B-52H, and T-38. The government is seeking vendors for new buy and repair services, reverse engineering of components like mechanical actuators and fuel pressurizing valves, and general market research for items including optical prisms, hydraulic filters, and motor controllers. Interested vendors are required to submit capabilities statements or Source Approval Request packages to the designated point of contact. For SAR packages, vendors must specifically request a drop-off via email to receive submission instructions. The procurement includes forecasted requirements extending from fiscal year 2027 through 2031, with deliverables ranging from prototypes and 3D modeling data to complete technical data packages. While total contract value is not specified, the solicitation provides detailed NSNs, forecasted pricing, and technical specifications for various line items to facilitate vendor identification and capability assessment.
F3YCCF 448 Scmw

POSTED

about 3 hours ago

DEADLINE

in 17 days

AI Contract Overview

Show more

Solicitation SPE4A7-26-T-749P is a total small business set-aside issued by the Department of Defense, ASC Supplier OE and AF Div, for the procurement of two directional control linear valve sleeves (NSN 1650-01-242-3370, Part Number 41004488). The requirement is categorized under NAICS code 336413. Delivery is required within 323 days of order, with shipping terms set as FOB Origin and the final delivery destination located at DLA Distribution San Joaquin in Tracy, California. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. Additional requirements include MIL-STD-129 for marking and labeling, physical identification per RQ017, and a CMMC Level 2 self-assessment. Quality assurance will follow MIL-STD-1916 or ASQ H1331 sampling plans, with unspecified attributes treated as major. Compliance with the Buy American Act and the Berry Amendment is required, and all payment requests must be processed electronically through the Wide Area WorkFlow system.

General Info

DoD small business set-aside for two linear valve sleeves delivered to Tracy, California.

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

1
PDF, High priority: read this first18 pages · rfq
High

Read the document

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • “NSN 1560-01-581-6238, SUPPORT,STRUCTURAL, WSDC: 40A, HELICOPTER, BLACKHAWK, UH-60A, UH-60L, HH/UH-60M, UH-60V.”Open now, due in 7 days
  • 15--WING ASSEMBLY,AIRCROpen now, due in 31 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Deadline changed

Response deadline changed from Sep 24, 2026 to Sep 29, 2026.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA

Full Description

Show more
SLEEVE,DIRECTIONAL CONTROL LINEAR VALVE
SLEEVE,DIRECTIONAL
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
THOMAS INSTRUMENT, INCORPORATED 5H860 P/N 41004488
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE4A7-26-T-749P
SECTION B
PR: 7018378781 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018378781 0001 EA 2.000
NSN/MATERIAL:1650012423370
DELIVERY (IN DAYS):0323
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:08/14/2027 Original Required Delivery Date:08/14/2027
SPE4A7-26-T-749P NSN/Part Number: 1650-01-242-3370 Quantity: 2 EA Purchase Request: 7018378781QTY: 2 Delivery: 323 days ADO

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS