Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Slotted Socket

Active

Z4968State & Local

Response Deadline08/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits a slotted impact socket that is a 3-in-1 design with 9/16 inch and 3/4 inch sizes, featuring a 12-point deep socket configuration and a 1/2 inch drive, engineered specifically to withstand high torque demands of impact drivers. The product must meet rigorous performance standards to ensure compatibility and safety under heavy-duty industrial use, with only the approved part number KLEIN66031 accepted. The solicitation is issued by Nashville Electric Service under solicitation number Z4968, targeting suppliers capable of delivering industrial-grade tools that meet precise engineering requirements for reliability in electric utility applications. The solicitation was posted on August 10, 2026, with responses due by August 13, 2026, and is open to vendors serving state, local, and education government entities. Performance must occur within Nashville, Tennessee, and the primary point of contact for procurement inquiries is K. Kegley, reachable via email at kkegley@nespower.com or by phone at 615-747-3572. Additional details and submission guidelines are available through the vendor portal link provided by Nashville Electric Service.

General Info

3-in-1 impact socket 9/16 and 3/4 inch, 12-point, 1/2 inch drive, KLEIN66031 only, for Nashville Electric Service.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332215 - Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

Z4968_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 10

Solicitation

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 07:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, USA

Contacts

Procurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

SLOTTED SOCKET IMP 3 IN 1 9/16" & 3/4" SLOTTED SOCKET IMP 3 IN 1 9/16" & 3/4" 12 POINT 3 IN 1 SLOTTED IMPACT SOCKET; 9/16 & 3/4 INCH. DEEP SOCKET WITH 1/2" DRIVE. HIGH TORQUE 12 POINT DESIGN. MUST BE ENGINEERED FOR USE WITH IMPACT DRIVERS. Approved Manufacturers and/or Part Numbers: KLEIN66031

Similar Contracts

Same NAICS industry code

KettlesThe Federal Prison System, under the Department of Justice, has forecasted a nationwide requirement to replace kitchen kettles across all its facilities. This action is intended to ensure consistent, safe, and reliable kitchen equipment functionality throughout the agency’s operational sites. The North American Industry Classification System code 332215 indicates the procurement will involve manufacturers or suppliers of metal kitchenware, specifically focusing on kettles suitable for institutional use. The solicitation is currently in the forecast phase, meaning no formal request for proposals has been issued yet, but interested vendors should prepare for upcoming opportunities. The place of performance is nationwide, requiring the ability to deliver and potentially install equipment at multiple Bureau of Prisons locations across the United States. Primary point of contact for inquiries is Craig Redd at credd@bop.gov, with David Orrantia serving as the Small Business Specialist for matters related to small business participation. There is no set-aside designation specified at this time, and no deadline or solicitation number has been assigned yet.

Federal Prison System / Bureau Of Prisons

POSTED

about 10 hours ago

DEADLINE

Source-Controlled Component Supply and Traceability Management

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

Supply of Gage Body (NSN: 5220010467628)The contract calls for the supply and delivery of three precision gage body units identified by NSN 5220010467628, with all items required to meet strict hazardous materials labeling standards under OSHA 29 CFR 1910.1200 and military shipment marking requirements per MIL-STD-129. The performance location is set at New Orleans, Louisiana, with a zip code of 70143-5077, and the work falls under NAICS code 332215, indicating manufacturing of industrial machinery and equipment. The solicitation is classified as a subcontract under the Defense Logistics Agency, a division of the Department of Defense, and responds to a procurement initiative issued on August 10, 2026. Interested parties must submit responses by the deadline of August 21, 2026, and all deliverables must be fully compliant with federal and military regulatory frameworks governing safety, packaging, and transportation of specialized equipment.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

TWEEZERS, ANTI-WICKING

Solicitation # SPE8E9-26-T-3412

The contract is for the procurement of 60 units of anti-wicking tweezers identified by NSN 3439-00-918-7918, intended for use on AWG 22 wire with 0.0625-inch insulation and specified at 5 inches in length. The item is classified as a commercial item and is supplied by CLAUSS CUTLERY CO. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the product or its direct contact, except for specified functional uses such as batteries, fluorescent lights, instrumentation, weapon systems, and chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment boundary as prescribed by NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies. The procurement is fully competitive under a military or federal specification, with delivery required within 57 days of award. The solicitation was issued under SPE8E9-26-T-3412, with a response deadline of August 21, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Matthew Kruc, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

Precision Milling Tool Supply (3AXIS Tooling)

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 21 hours ago

DEADLINE

Fastener and Hardware Supply

Inc Federal Prison Industries

POSTED

about 21 hours ago

DEADLINE

BLADE, SAFETY RAZOR

Solicitation # SPE2DS-26-T-326E

The contract specifies the procurement of 4 packages, each containing 100 double-edge platinum plus safety razor blades, for a total of 400 blades. The blades must be flexible, autoclavable, and individually wrapped to meet stringent medical hygiene and usability standards. All products must comply with the latest edition of the Medical Marking Standard No. 1, which dictates proper identification and labeling requirements, with copies available through DLA Troop Support. The items are governed by DLA’s packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The National Stock Number for the item is 8530-01-366-9748, and delivery is required within 20 days after award to Fort Campbell, Tennessee. The solicitation, issued under SPE2DS-26-T-326E, was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Medical Supply Chain for Surgical Forces, with Marc Canalichio as the point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Cleaning Tool Brushes (NSN 7920-12-399-7384)The contract encompasses the supply of a commercial off-the-shelf cleaning tool brush identified by NSN 7920-12-399-7384, with strict adherence to approved manufacturer part numbers. The item is designated exclusively for government use and must meet all applicable technical and quality standards specified in the procurement requirements. As a subcontract under the Department of Defense, this procurement is managed by the Defense Logistics Agency and falls under NAICS code 332215, indicating classification within the hand tool manufacturing sector. All submissions must adhere to the deadline of August 17, 2026, with the solicitation posted on August 7, 2026, and the place of performance and delivery details are to be determined as part of award compliance. The contract is not subject to any specific set-aside provisions and is open to qualified subcontractors capable of fulfilling the federal supply specifications.

Defense Logistics Agency

POSTED

DEADLINE

Dental Chair Control Panel Supply

W7NT Uspfo Activity Nd Arng

POSTED

DEADLINE

Supply of HASP Hinged DevicesThe contract solicits the manufacture or supply of military-grade HASP hinged security devices under CLIN 1HEN9, exclusively for small businesses as designated by a Total Small Business Set-Aside under FAR 19.5, ensuring full eligibility and participation are restricted to small business concerns. The North American Industry Classification System code 332215 identifies the scope as industrial machinery and component manufacturing, emphasizing precision fabrication and compliance with defense-grade standards. Performance is required at BREMERTON, WA 98314-6001, with all deliverables expected to meet stringent military specifications for durability, security, and operational reliability in deployed environments. The opportunity was posted on August 5, 2026, with a firm bid submission deadline of August 17, 2026, and is managed by the Land Supply Chain organization within the Department of Defense, indicating the equipment will support critical logistics and infrastructure security functions.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Measuring Tapes and Training AccessoriesThe contract involves the supply of durable, calibrated measuring tapes and heavy-duty nylon training sleds with pull straps, specifically intended for use in fitness testing and physical conditioning programs. These items are critical for accurate performance assessment and structured physical training, ensuring consistency and reliability in military and defense-related fitness evaluations. The equipment must meet stringent quality standards to withstand frequent, high-intensity use in varied environmental conditions. Issued under the Defense Logistics Agency on behalf of the Department of Defense, this subcontract falls under NAICS code 332215, which pertains to other fabricated metal product manufacturing. The contract was posted on August 5, 2026, and is tied to the award number SPE8EG24D0005 with delivery order SPE8E626F1244. Although specific performance locations and point of contact details are not provided, the procurement is aimed at equipping defense facilities and training units with standardized, reliable athletic and fitness testing tools to support readiness and operational effectiveness.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Raw Materials or Components for Cartridge AssemblyThe contract seeks suppliers to provide high-pressure springs, seals, or metal housings essential for the assembly of safety relief cartridges, targeting specialized manufacturers with expertise in precision components for defense applications. The solicitation falls under NAICS code 332215, indicating a focus on boiler, tank, and shipping container manufacturing, and is classified as a subcontract under the Department of Defense, specifically administered by DEPOT OKLAHOMA at Tinker Air Force Base, Oklahoma, with the place of performance designated as 73145-8000. The opportunity was posted on August 5, 2026, with responses due by August 17, 2026, and is open to qualified vendors capable of meeting stringent quality and performance standards required for mission-critical safety systems. There is no set-aside designation specified, meaning the contract is open to all eligible small and large businesses without preference, and the sourcing is conducted through the DLA DIBBS platform via the reference number SPE7MC26T168Y. Suppliers must be prepared to deliver components that comply with exacting technical specifications for high-pressure environments, ensuring reliability and safety in operational use. While no point of contact is listed in the data provided, interested parties are directed to the official DIBBS portal for detailed requirements, submission guidelines, and qualification criteria necessary to participate in this procurement.

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Crossarm Weathered Steel

Solicitation # Z4957

The contract specifies the procurement of weathered steel crossarms measuring 4 inches by 4 inches by 9 feet 4 inches, designed for tangent applications and fabricated from ASTM weathering steel in compliance with NES Specification 33-506R4 and Drawing LSK-1254-F. Each crossarm must be accompanied by material certifications verifying the use of certified weathering steel, ensuring structural integrity and corrosion resistance. Deliveries are to be made on open flatbed trucks or trailers without packaging that could compromise handling or inspection upon arrival. Only approved manufacturers including REINKE, SFORMS, THOMAS-B, UNIVERSA, HUGHESB, DIXIE, FALCONS, and DIS-TRAN are eligible to supply these crossarms, and all shipments must fully align with the technical and compliance requirements outlined in the specification. The solicitation, titled Crossarm Weathered Steel with identification number Z4957, was posted on August 10, 2026, with a response deadline of August 14, 2026. Issued by Nashville Electric Service under the Tennessee State and Local Government (SLED) procurement category, the contract is intended for performance in Nashville, Tennessee. Primary contact for inquiries and submissions is Tiffany Caruthers, Procurement Contact, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593. All bids must be submitted through the official vendor portal at the provided UI link, and no set-aside provisions are in effect for this solicitation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # Z4969

The contract pertains to a fuse holder assembly specifically designed for capacitor banks operating at 69,000 volts, used at four locations: North, Radnor, South, and West. The approved part for this assembly is the COOPER FN11B1, and only this manufacturer’s component is accepted for compliance. The solicitation, issued by Nashville Electric Service under solicitation number Z4969, is targeted at suppliers capable of providing this critical electrical component for high-voltage infrastructure. The solicitation was posted on August 10, 2026, with a firm response deadline of August 13, 2026, at 7:00 PM Eastern Time. This procurement falls under the state and local government (SLED) category, with performance required in Nashville, Tennessee. All bids must be submitted through the vendor portal linked to the solicitation, and inquiries should be directed to the primary point of contact, K. Kegley, via email or phone provided.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Solicitation # Z4965

The contract is for a one-size-fits-most aerial lift harness featuring an H-style full body design with a 3-inch back ring, constructed from durable nylon webbing and equipped with pass-through friction buckles and an adjustable chest strap. The harness must meet ASTM and OSHA safety standards, and only specific approved manufacturers and part numbers—BUCKNGHMU64A23H6E00 and BASHLIN662AD-O—are acceptable for compliance. This solicitation, titled Lift Harness and identified by number Z4965, was posted on August 10, 2026, with a response deadline of August 17, 2026, at 7:00 PM. The solicitation is issued by Nashville Electric Service under the Tennessee state government, with performance required in Nashville, Tennessee. All proposals must be submitted through the vendor portal linked in the posting, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided.

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

Solicitation # Z4964

The contract solicits X Large premium grain cowhide driver gloves with the Gunn pattern and shirred elastic cuff, specified as GLOVE LEATHER XL ALL COW PREMIUM GRAIN LEATHER DRIVERS GLOVE, with approved part numbers BEARKNUGL-338-XL, KUNZGL556-XL, and YOUNGSTO11-3255-60-XL. The solicitation is issued under number Z4964 by Nashville Electric Service, a state, local, and education agency based in Nashville, Tennessee, with performance required locally in the same city and state. The solicitation was posted on August 10, 2026, and responses must be submitted by August 17, 2026, at 7:00 PM local time. Procurement inquiries should be directed to K. Kegley at kkegley@nespower.com or 615-747-3572. The solicitation is accessible via the vendor portal at the provided URL, and no set-aside classification or NAICS code is specified, indicating an open competition for qualified suppliers.

Other Leather and Allied Product Manufacturing

POSTED

DEADLINE

Solicitation # Z4960

The contract solicits safety glasses meeting ANSI Z87.1 standards, with two specified variants: silver mirror and brown flash mirror, both featuring anti-scratch coatings. Approved part numbers include BOUTON250470005, CROSSFIR263, and CROSSFIR29117, and the quantities required are 960 units total, with two distinct item numbers listed for the two mirror types. The procurement is issued by Nashville Electric Service under solicitation number Z4960, with a response deadline of August 13, 2026, and a posting date of August 10, 2026. The solicitation is classified under a SLED agency type, with performance and administrative responsibilities centered in Nashville, Tennessee. Contact for procurement inquiries is K Kegley, reachable via email and phone provided. All supplied glasses must strictly comply with ANSI Z87.1 safety requirements to qualify for award.

Ophthalmic Goods Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4963

The contract solicits a line block with a 3-inch sheave mounted on ball bearings to ensure minimum friction, designed to accommodate rope up to 5/8 inch in diameter. The unit must include a safety hook and a swivel eye, feature a side-opening design for ease of use and installation, and be sourced from approved manufacturers or part numbers Hastings 3550 or SHERMHLB-472. The solicitation is issued by Nashville Electric Service under the state of Tennessee, targeting public sector procurement through a SLED agency classification, with responses due by August 13, 2026, at 7:00 PM local time. All proposals must be submitted through the vendor portal linked in the solicitation, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided. The place of performance is Nashville, Tennessee, with no specific set-aside type indicated.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # Z4959

The contract solicits the supply of 65-foot steel poles with a minimum capacity of 65 ft-kips at ground level, meeting the structural equivalence of Class H3 standards. Each pole must be hot dipped galvanized in full compliance with ASTM A123 to ensure long-term corrosion resistance and durability under environmental exposure. All fabrication details, including drilling patterns and engineering specifications, must adhere strictly to the most current version of the NES Specification LSK-1212 to guarantee uniformity and compatibility with existing infrastructure. The poles must be sourced exclusively from approved manufacturers, with acceptable part numbers including CHM65H3, TAPP65H3, DIS-TRAN65H3, FTWORTH65H3, MDHENRY65H3, ROHN65H3, SABRECO65H3, V&SSCHU65H3, and VALMONT65H3, ensuring proven performance and regulatory compliance. The solicitation is issued by Nashville Electric Service under reference number Z4959, with a posted date of August 10, 2026, and a firm response deadline of August 21, 2026. It is categorized as a state and local government procurement, with performance located exclusively in Nashville, Tennessee. Procurement inquiries and submissions must be directed to Tiffany Caruthers, the designated procurement contact at tcaruthers@nespower.com. Interested parties must submit proposals through the official vendor portal at the provided URL before the stated deadline, ensuring full adherence to all technical, material, and compliance requirements outlined in the solicitation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # Z4962

The contract solicits the Flagman Vest, a Class 3 Level 2 arc-rated safety vest meeting ANSI/ISEA 107 standards, in size XL with a lime-yellow summer-weight woven mesh construction. The vest features a zipper front closure, orange trim, and segmented heat-transfer reflective tape for enhanced visibility, along with two chest pockets and two inside hip pockets on each side. It must bear a single-color NES logo in black ink. Only approved manufacturers with the specific part number ESTEXMF1616L-FR3Z4P-XL are acceptable. The solicitation is issued by Nashville Electric Service under solicitation number Z4962, targeting state and local government procurement, with responses due by August 14, 2026, at 7:00 PM CT. The contract is tied to performance in Nashville, Tennessee, and all inquiries should be directed to the primary procurement contact, K. Kegley, via phone or email provided.

Clothing and Clothing Accessories Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4967

The solicitation seeks a hand-line hook rated for 500 pounds, featuring a 3/8 inch diameter, an overall length of 6 and a half inches, and designed with two eyes for secure attachment. Approved manufacturers include BASHLIN with part number S35H and TALLMAN with part number 258, ensuring compliance with specified mechanical and safety standards. This item is intended for use in utility operations requiring reliable and durable equipment for manual handling tasks. The contract, identified by solicitation number Z4967, was posted on August 10, 2026, with responses due by August 14, 2026, at 7:00 PM. The procuring entity is Nashville Electric Service, a state and local government agency based in Nashville, Tennessee. All performance is expected to occur in Nashville, TN, and inquiries should be directed to K. Kegley, the primary procurement contact, via phone at 615-747-3572 or email at kkegley@nespower.com. The solicitation is accessible through the vendor portal at the provided UI link.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4966

The contract requires the supply of aHOLDER TOOL AERIAL 3 POCKET AERIAL TOOL HOLDER with exact dimensions of 35x14x8 inches, constructed from hard plastic and featuring three large pockets with steps and two bit pockets lined with one-inch inside diameter PVC. Only approved manufacturers and part numbers are accepted, specifically AMERISA SKU-011 and GLOBAL B011. The solicitation is issued by Nashville Electric Service under solicitation number Z4966, with a posted date of August 10, 2026, and a response deadline of August 18, 2026, at 7:00 PM. The procurement is categorized under SLED and the place of performance is in Nashville, Tennessee. All inquiries and submissions must be directed to the primary point of contact, K Kegley, via email at kkegley@nespower.com or phone at 615-747-3572, and submissions are to be made through the vendor portal at the provided uiLink.

Office Supplies (except Paper) Manufacturing

POSTED

DEADLINE

Universal Hotstick

Solicitation # Z4961

The contract calls for the procurement of Universal Hot Sticks measuring 40 feet in length, constructed with round tubular fiberglass sections featuring Sure-Lock joints and a disconnect hook. Each section must include a position indicator running the full length of the stick and a numerical measuring system for precise depth and reach verification. The product must fully comply with all applicable OSHA and ASTM safety standards to ensure operational reliability and worker protection. Only approved manufacturers and part numbers—UTILITYUSTS-40-EM and HASTINGSEV-40—are acceptable for bid submission. The solicitation, identified by number Z4961, was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the Tennessee state agency, with performance occurring in Nashville, TN. The procurement is categorized under SLED and is open to qualified vendors through the official vendor portal. All inquiries and submissions must be directed to the primary point of contact, K. Kegley, reachable via phone at 615-747-3572 or email at kkegley@nespower.com.

POSTED

DEADLINE

Adapter, Terminal, PVC Thermoplastic

Solicitation # Z4956

The contract is for an Adapter, Terminal, PVC Thermoplastic designed for a 2-inch diameter conduit with an actual outside diameter of 2.375 inches. Approved manufacturers include SEDCO, CAN-TEX, CARLONE, and ALLIED, with specific part numbers such as PICOMAME943J and ALLIED59620 required for compliance. The solicitation number is Z4956, issued by Nashville Electric Service under the state of Tennessee, targeting state, local, and educational (SLED) government procurement. The solicitation was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM Eastern Time. The place of performance is Nashville, Tennessee, and the primary point of contact for procurement inquiries is Tiffany Caruthers, reachable via email at tcaruthers@nespower.com or by phone at 615-747-3593. Further details and submission instructions can be accessed through the vendor portal at the provided uiLink.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE