This Solicitation opportunity from California was posted on September 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SMF Pedestrian Walkway Hub - Flight Paths Public Art Installation Project

Closed

41015State & Local

Submission Closed10/15/2026, 02:00:00 PM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332323

New

SLED

CDBG-DR ECAT Bus Shelter Manufacturing Project HS018 - Re-Solicit

Solicitation # PD 26-27.008

Solicitation PD 26-27.008 is an invitation for bids from Escambia County, Florida, for the manufacture and delivery of 91 pre-manufactured bus shelters for Escambia County Area Transit. This project is funded through the Community Development Block Grant Disaster Recovery (CDBG-DR) Program as part of the Hometown Revitalization Program to support long-term recovery following Hurricane Sally. The scope includes the production of 81 four-seater, 9 six-seater, and 1 twelve-seater shelter, all of which must feature solar-powered lighting and advertising space. The contract will be awarded to the most responsive and responsible firm offering the lowest total price on an all-or-none basis. Deliverables must be provided in four lots of approximately 25 units, with the first shipment due no later than November 30, 2026, and subsequent shipments every 30 days. The contractor is responsible for all risk of loss until the County accepts the items at the destination. Compliance requirements are extensive, including adherence to the Americans with Disabilities Act, OSHA standards, and HUD Section 3 guidelines to promote economic opportunities for low- and very low-income residents. Additionally, the contractor must provide performance and payment bonds for 100 percent of the contract price and comply with the Davis-Bacon Act regarding prevailing wages. Bids must be submitted via the OpenGov portal by November 30, 2026.

POSTED

DEADLINE

Plate Manufacturing and SupplyThis subcontract involves the fabrication or sourcing of 44 units of plates under NSN 9905LLNC16357 for prime contractors supporting DLA supply contracts. The work is managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with the place of performance located in Cherry Point. The contractor must ensure all items meet strict technical specifications and adhere to specific packaging and labeling standards, including ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N(1). Quality sampling must be performed according to MIL-STD-1916 or ASQ H1331. Additionally, the provider is required to maintain NIST SP 800-171 compliance and strictly adhere to the Buy American Act.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Steel Gate and Metalwork FabricatorThis subcontract involves the fabrication and installation of main access and pedestrian security gates for UNHCR facility projects located in Adre, Chad. The scope of work requires the production of welded steel gates, specifically three units measuring 20 meters and two units measuring 45 meters, along with the installation of reinforced posts, bracing, hinges, and security locks. To ensure durability and operational readiness, all metalwork must receive anti-corrosion treatments in accordance with industry standards. The selected fabricator is responsible for delivering fully installed and operational security gates to the prime contractors overseeing the facility projects.

POSTED

DEADLINE

Impact-Rated Concession Serving Window SupplierThis subcontract agreement involves the supply of custom-fabricated, impact-rated single slider serving windows for prime contractors operating on Gulf State Park projects in Alabama. The scope of work requires the fabrication and delivery of two 46 by 48 inch aluminum flush mount self-closing windows featuring a clear anodized finish and clear tempered safety glass. All deliverables must adhere to QuikServ or equivalent standards, specifically requiring impact-rated certification and strict compliance with tempered safety glass regulations. The selected supplier is responsible for the complete fabrication and delivery of both units directly to the designated project site.

POSTED

DEADLINE

Secure Equipment Storage SupplyThis subcontract opportunity with the California Department of Corrections and Rehabilitation involves the supply and installation of secure storage units and lockers for prime contractors. The project specifically requires the provision of secure storage facilities located within range compounds to house government target equipment and other related materials. The solicitation was posted on November 6, 2026, with a response deadline of December 3, 2026. Classified under NAICS code 332323, the contract focuses on the delivery and installation of specialized storage solutions to ensure the security of government assets at CDCR facility projects.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

EC - MTE Railing Replacement PartsThe Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of materials required to replace damaged railings at the West Slope diversion sites within the Missouri Basin. This project, titled EC - MTE Railing Replacement Parts, is categorized under NAICS code 332323, which pertains to the manufacturing of ornamental and other metalwork. The forecast was posted on November 6, 2026, and serves as a notification for potential vendors regarding upcoming requirements for these specific replacement parts. Interested parties may coordinate with David Bryan or Small Business Specialist Jennalyn Kent for further information regarding this acquisition.

Bureau of Reclamation

POSTED

DEADLINE

Marine Metal Door Fabrication and SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, requires the fabrication and supply of one metal marine door. The door must be specifically designed for marine environments and delivered FOB Origin to DLA Distribution Norfolk. The project is designated as a Total Small Business Set-Aside under NAICS code 332323. Strict adherence to military standards is required for the completion of this contract. Packaging must comply with MIL-STD-2073-1E, marking must follow MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Pipe and Tube RailingsThis subcontract opportunity involves the fabrication and installation of metal pipe and tube railings for prime contractors working on Harris County park projects. The scope of work includes the delivery of installed safety railings and the application of manufacturer-approved protective coverings to finishes to ensure preservation throughout the construction process. The project is managed under Harris County in Texas and is categorized under NAICS code 332323. Interested parties must submit their responses by the deadline of November 30, 2026, at 8:00 PM.

POSTED

DEADLINE

Fencing Materials SupplierThis subcontract agreement establishes a partnership for the supply of fencing materials for prime contractors working on State of Alabama G09_3 Equipment Yard projects. The scope of work includes the provision of fencing fabric, posts, rails, hardware, and gates, with a requirement that the supplier delivers all specified materials directly to the project site. To ensure quality and compliance, the supplier must provide all necessary manufacturer documentation and official reseller authorization. Eligible suppliers must be registered for state taxes in Alabama to participate in this contract. The solicitation was posted on November 6, 2026, with a response deadline of November 11, 2026. This procurement falls under NAICS code 332323 and is managed through the Alabama state procurement system.

POSTED

DEADLINE

Металоконструкції та комплектуючі для встановлення композитних стендів зі світлинами загиблих воїнів, за кодом Єдиного закупівельного словника ДК 021:2015 «Єдиний закупівельний словник» - 44210000-5 Конструкції та їх частини (ДК 021:2015 «Єдиний закупівел

Solicitation # UA-2026-11-06-014371-a

The Novopokrovska Village Council of the Chuhuiv District in the Kharkiv region is soliciting bids for the procurement of metal structures and components used to install composite stands featuring photographs of fallen soldiers. This procurement falls under the Unified Procurement Dictionary code 44210000-5 for constructions and their parts. The project will be executed in the village of Novopokrovka, Kharkiv region. Interested parties must submit their tender proposals in the Ukrainian language by the deadline of November 21, 2026. No tender security is required for participation in this solicitation. Primary contact for this opportunity is Olena Slabinska, and the official process is managed through the Prozorro electronic system.

Новопокровська селищна рада Чугуївського району Харківської області

POSTED

DEADLINE

Corrugated Metal "R" Panel SupplierThis subcontract agreement involves the supply of corrugated metal panels for prime contractors working on Jefferson Parish Government recreation projects in Louisiana. The selected supplier is responsible for the fabrication and delivery of three dark green A19 gauge corrugated metal R-panels, each measuring 12 feet high by 38 inches wide, to a project site located in Westwego. All materials provided must strictly adhere to A19 gauge specifications. The solicitation was posted on November 6, 2026, with a response deadline of November 18, 2026. This procurement falls under NAICS code 332323 and is managed through the Jefferson Parish Government.

Jefferson Parish Government

POSTED

DEADLINE

Waste and Recycling Container SupplyThis subcontract agreement involves the manufacture and delivery of industrial waste and recycling containers for prime contractors working on projects for the Harris County Department of Education in Texas. The scope of work includes providing various sizes of steel dumpsters and plastic rolling bins, with a strict requirement that all equipment adheres to ANSI/ASTM standards to ensure safety and durability. The solicitation was posted on November 6, 2026, with a response deadline of December 2, 2026. Classified under NAICS code 332323, the contract focuses on the precise delivery of specified quantities and sizes of containers to support waste management operations across the agency's designated project sites.

HARRIS COUNTY DEPT OF EDUCATION

POSTED

4 days ago

DEADLINE

in 22 days

AI Contract Overview

The SMF Pedestrian Walkway Hub Flight Paths Public Art Installation Project, solicitation number 41015, is a CUPCCAA informal bid issued by the County of Sacramento Department of Airports. The project involves the specialty installation of the Flight Paths public artwork by David Brooks, consisting of ten flight paths and twelve bird sculptures at the Sacramento International Airport. The estimated construction cost is 210,000.00 dollars, and the contract will be awarded to the lowest responsive and responsible bidder. Bidders must hold a valid California C-61/D-34 Prefabricated Equipment Contractor license and provide a self-performance certification, as construction subcontractors are prohibited. The scope of work includes all labor, materials, and rigging necessary for the installation, with the County providing specific equipment, including JLG compact crawler boom lifts and a Genie electric slab scissor lift. Performance is managed through a phased Notice to Proceed structure, where NTP-1 covers scheduling and documentation, and NTP-2 establishes site availability and commences contract time. The contractor is responsible for adhering to strict structural calculations for aircraft cable suspension and curtain wall attachments, as well as complying with FAA nondiscrimination and Buy American preference requirements. Final acceptance is contingent upon a joint receiving inspection, completion of a punch list, and a visual review by the artist.

General Info

Sacramento County seeks a licensed contractor to install Flight Paths public art for $210,000.

Agency

California → Airports

NAICS

332323 - Ornamental and Architectural Metal Work Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Documents

specifications

High

specifications

High

specifications

High

specifications

High

specifications

High

specifications

High

5 pages · specifications

High

3 pages · specifications

High

specifications

High

specifications

High

ifb

High

specifications

High

specifications

High

specifications

High

specifications

High

specifications

High

specifications

High

specifications

High

specifications

High

specifications

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 23

Solicitation

Response DeadlineOct 15

Deadline has passed

Submission Closed

10/15/2026, 02:00:00 PM PDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → Airports

Contacts2 people available

OfficeSacramento, CA, 95827, USA

Organization / AgencyCalifornia → Airports

Office AddressSacramento, CA, 95827, USA

Contacts

Song hoon KoAirport Manager Facilities

contact@example.gov

+1 (555) 000-0000

Terry KeysSr Contract Services Officer

contact@example.gov

+1 (555) 000-0000

Interested Companies (20)

Asphalt ImpressionsSacramento, CA

Atthowe Fine Art ServicesOakland, CA

Balfour Beatty ConstructionAtlanta, GA

See All 20 Interested Companies

Get full access to view all interested companies, their contact details, and full contractor profiles.

Get full access

Full Description

The Project includes, without limitation, furnishing all necessary labor, materials, equipment and other incidental and appurtenant Work necessary to satisfactorily complete the Project, as more specifically described in specifications. This Work will be performed in strict conformance with the specifications, permits from regulatory agencies with jurisdiction, and applicable regulations. The quantity of Work to be performed and materials to be furnished are approximations only, being given as a basis for the comparison of Bids. Actual quantities of Work to be performed may vary at the discretion of the County. Read ( Attachments A-U ) for further details.