Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Snow Pusher Equipment Supply and Delivery

Active

Federal

Response Deadline07/27/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A 14-foot sectional snow pusher with a coupler designed for compatibility with the John Deere 724K Loader is being procured for delivery to Minot Air Force Base, with a zip code of 58704. The equipment must be packaged and shipped in full compliance with federal regulations, ensuring safe and secure transport to the designated installation. This contract is designated as a total small business set-aside under the SBA program, as defined by FAR 19.5, and is classified under NAICS code 333120, which covers other farming machinery manufacturing. The solicitation was posted on July 10, 2026, with a response deadline of July 27, 2026, at 6:00 PM. The procuring agency is the Department of Defense under the office FA4528 5 Cons, and the contract type is a subcontract. All offers must meet technical and compliance requirements for federal shipping and operational suitability at the specified location.

General Info

14-foot snow pusher for John Deere 724K Loader to Minot AFB, small business set-aside, federal shipping compliance required.

Agency

Department Of Defense → FA4528 5 ConsView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

Minot AFB, ND, 58704, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 10

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 06:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4528 5 Cons

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4528 5 Cons

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and deliver a 14-foot sectional snow pusher with coupler compatible with John Deere 724K Loader to Minot AFB, including packaging and federal-compliant shipping.

Similar Contracts

Same NAICS industry code

Commercial Item Supply – Wheeled Lift Truck (NSN 4910092449)

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Wheel LoaderThe solicitation requires the delivery of a new, up-to-date heavy-duty wheel loader, either a CAT 972 XE or an equivalent model, designed for continuous quarry operations such as loading articulated dump trucks and crushers. The machine must have an operating weight exceeding 24,000 kg and a loading height over 3.30 meters, powered by a 6-cylinder, water-cooled diesel engine with output exceeding 250 kW (340 hp), compliant with the latest EU emission standards and equipped with a Diesel Particulate Filter. The loader must include an HD 4.0 m³ shovel with eight teeth for rock quarrying, fixed mounting, and an OEM-integrated payload and weighing system with an in-cab digital display. The cabin must be soundproofed, pressurized, and feature ROPS and FOPS certification meeting ISO 3471-2008 and ISO 3449-2005 Level II standards, with air conditioning, heated and ventilated leather/cloth seat, ergonomic access with ladder and handrails, joystick steering, emergency electric steering, two-point seat belts, heated exterior mirrors, windshield wipers and washers front and rear, a cleaning platform, sun visors, and a DAB+ radio. The electrical system must be 24 volt, equipped with LED driving, work, and service lights, a rotating beacon, and a jump start device with connection cable. The machine must support road travel with a speed over 30 km/h, include a continuously variable transmission, recovery device, lockable fuel caps, central lubrication system, reversing warning system, collision avoidance system, rear camera monitor, and tire specifications of 26.5 R 25 VJTxL3 with VSDL x L5 wheel chocks. It must be fully compliant with German StVO regulations, bear a CE mark, and include all standard manufacturer equipment and integral components required for a complete unit of work. The machine must be delivered fully assembled and operational at the factory, accompanied by three printed or CD-based copies each of operating instructions, workshop manuals, and spare parts catalogs in both German and English, and must include a 36-month or 2,500 operating hour warranty covering all parts and labor as per the manufacturer’s specifications. Manufacturer-qualified personnel must provide a six-hour instructional demonstration in German to operating personnel within four days of delivery at the designated installation site in Grafenwoehr,

0409 Aq Hq Contract

POSTED

about 10 hours ago

DEADLINE

Skid Steer LoaderThe Department of Veterans Affairs, through Network Contracting Office 23, is seeking bids for a Brand Name or Equal Skid Steer Loader model JCI 3TS-8W to be delivered to the Black Hills VA Health Care System. This solicitation, numbered 36C26326Q0888, is a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses qualify to respond. The North American Industry Classification System code is 333120, covering construction machinery manufacturing. Offerors must strictly adhere to the instructions in Section E.2 of the addendum to FAR 52.212-1 and are responsible for regularly checking the posting for any amendments, as all updates will be published exclusively through the official procurement portal. Responses are due by July 30, 2026, at 5:00 a.m. Eastern Time, with the solicitation originally posted on July 20, 2026. The contract will be managed from Saint Paul, Minnesota, and the equipment must be delivered to Fort Meade, South Dakota. Primary point of contact for questions is Theresa Thunder, reachable via email and phone provided.

Network Contract Office 23 (36C263)

POSTED

about 10 hours ago

DEADLINE

REEL, CABLEThe contract specifies the procurement of a single unit of cable reel with NSN 8130-01-587-8466 and part number P0086/300-217-701, issued under solicitation SPE8ED-26-T-1140 for delivery to Fort Stewart, Georgia. Delivery is required within 20 days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance both occur at destination, and the item is classified as a critical application item. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with palletization following DLA’s RP001 standards, and all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence. Sampling must adhere to MIL-STD-1916 or an equivalent zero-based inspection plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The contractor must ensure all supplies are properly marked and documented, with removal of government identification from non-accepted items required. Shipments must be sent via the fastest traceable means, excluding parcel post, and all documentation, including source approval requests, must meet the RC001 requirements. Covered defense information provisions apply, and the contract mandates strict adherence to unit of issue standards as defined by the DLA. The delivery is for government use only, with a required delivery date of July 15, 2026, and contact information is provided for the primary point of contact at DLA.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Snow Plow Purchase for the Cleveland NFThe U.S. Department of Agriculture, through its CSA Southwest 1 office in Albuquerque, New Mexico, is soliciting bids for the purchase of snow plows under contract title Snow Plow Purchase for the Cleveland NF, with solicitation number 127EAY26Q0088. This opportunity is a combined solicitation set aside entirely for small businesses as defined by the Small Business Administration, in accordance with FAR 19.5, and is classified under NAICS code 333120 for construction machinery manufacturing. The solicitation was posted on July 19, 2026, and responses are due by 9:00 PM Eastern Time on July 30, 2026. The equipment is intended for use at the Groveland location in California, though the contracting office is headquartered in New Mexico. All inquiries should be directed to Jasmine Williams, the primary point of contact, reachable via email at jasmine.williams@usda.gov. The full solicitation details and submission portal are accessible through the SAM.gov platform at the provided web link.

Csa Southwest 1 Usda-Fs

POSTED

DEADLINE

Earth Moving Moldboard (Replacement Part) SupplyThe contract entails the procurement and delivery of two military-spec earth moving moldboards, identified by NSN 3805016171523 and part number 9J7701, specifically for use in military equipment. These components are critical replacement parts intended to maintain operational readiness of existing vehicles or machinery within the Department of Defense fleet. The contract is classified as a subcontract under NAICS code 333120, which pertains to construction machinery manufacturing, indicating the specialized nature of the fabrication and quality requirements tied to military standards. The awarding agency is the Defense Logistics Agency, responsible for ensuring consistent supply chain support across U.S. military branches. The posting date of July 17, 2026, signals a future procurement timeline, suggesting planning ahead for logistical needs, while the lack of a solicitation number implies this was not competitively bid through a public announcement but rather issued under an existing framework or direct allocation. The place of performance and point of contact details are unspecified, indicating that delivery may be directed to multiple or classified military locations without public disclosure. The contract is linked to a DIBBS record, highlighting its traceability within the Department of Defense’s procurement system, ensuring accountability and compliance with defense procurement protocols throughout fulfillment and delivery.

Defense Logistics Agency

POSTED

DEADLINE

GPS Enabled Painting Device (on UTV)This is a presolicitation notice issued by the 158th Fighter Wing under the Department of Defense for market research on a GPS-enabled painting device to be mounted on a Kubota RTV utility task vehicle. The device must be semi-autonomous, capable of airfield painting with limited tolerances without requiring stencils, and designed to integrate with the UTV’s existing power steering, alternator, and front hydraulics. Respondents are invited to describe their capability to supply, install, and provide training for such a system, including any associated software or licensing terms. The notice is strictly for information gathering and does not constitute a binding commitment, solicitation, or guarantee of future funding. All submissions are voluntary and will not influence future vendor evaluations or qualifications, nor will feedback be provided to respondents. The NAICS code 333120 applies with a small business size standard of 1250 employees, and the requirement is set aside exclusively for small businesses. Funding is not currently available, and no contractual obligation will arise until appropriated funds are formally allocated and confirmed in writing by the Contracting Officer. Responses must be submitted in writing, not exceeding ten pages, and are due by July 28, 2026, at 13:00 EST. All future solicitations stemming from this research will be issued independently through the Government Point of Entry, and no information about those potential procurements will be shared based on responses to this notice. Points of contact for inquiries are James Yoshikawa and Kristen Lucey, with performance expected in South Burlington, Vermont.

W7N4 Uspfo Activity Vtang 158

POSTED

DEADLINE

Manufacture and Supply of Clamshell Assembly (NSN 3815-01-463-9925)The contract entails the full manufacturing, assembly, testing, and delivery of a clamshell assembly in strict adherence to military National Stock Number specifications, specifically NSN 3815-01-463-9925. All work must comply with applicable military packaging, labeling, and hazardous materials handling standards to ensure operational safety and regulatory conformity. The scope encompasses end-to-end production, from raw material processing through final quality assurance testing, with delivery targeted to the specified place of performance in Lima, Ohio, under the ZIP code 45804-3700. This is a subcontract opportunity under NAICS code 333120, categorized under the Department of Defense’s Construction & Equipment Manu & Con organization. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026, providing potential bidders a 11-day window to submit proposals. While no set-aside type is designated, the procurement is administered through the Defense Logistics Agency’s DIBBS platform, and interested parties must access the official solicitation via the provided digital link to obtain detailed technical requirements and submission guidelines.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

PARTS KIT, TRACK ENDThe contract pertains to the procurement of 7,588 KT of a Parts Kit, Track End and Parts Kit, Track Shoe Assembly, identified by NSN 2530-01-295-3113, under an indefinite-delivery, indefinite-quantity (IDIQ) arrangement through solicitation SPE7LX-26-U-8523. Delivery is required within 74 days of order placement, with FOB Origin terms placing full responsibility for transportation costs and risks on the contractor until goods are loaded at the point of shipment. Inspection and acceptance occur at the origin, and the contractor must implement a quality system compliant with SAE AS9003 or ISO 9001, ensuring zero non-conformances through sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. All items must conform to MIL-STD-2073-1E for packaging and preservation, adhering to Special Packaging Instruction AK12953113 Revision C, and be marked per MIL-STD-129 with barcoding and hazard labeling as required by OSHA’s Hazard Communication Standard. The contract includes stringent cybersecurity obligations requiring CMMC Level 2 certification, compliance with NIST SP 800-171, and implementation of safeguards for covered defense information under DFARS 252.204-7012. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA培训, and authorization. Invoicing must be conducted exclusively through Wide Area WorkFlow (WAWF), and delivery orders are subject to a maximum value of $350,000 per order, with no guaranteed minimum volume over the one-year base period. All offerors must provide a Unique Entity Identifier and CAGE code, certify their size status and socioeconomic classifications, and comply with representations and certifications related to small business programs, defense telecommunications, and prohibited procurement from Communist Chinese military companies. The contract allows for extension via clause 52.217-8 and includes provisions for accelerated payments to small business subcontractors and electronic submission of payment requests, with the Defense Logistics Agency overseeing administration through its Strategic Acquisition Program Directorate.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

in about 19 hours

ASSEMBLY, CLAMSHELLThe contract is for the procurement of one unit of an ASSEMBLY, CLAMSHELL with NSN 3815-01-463-9925 under solicitation SPE8EE-26-T-2115, issued by the Department of Defense through the Construction & Equipment Manu & Con agency. Delivery is required within 20 days after order award, with the response deadline set for July 27, 2026, and the solicitation posted on July 16, 2026. The NAICS code 333120 identifies the industry as machinery manufacturing, specifically for industrial machinery. The place of performance is in Lima, Ohio, with Philip Ferrara listed as the primary point of contact, reachable via email and phone provided. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Additionally, the contract requires the removal of government identification from any non-accepted supplies as per RQ011, though no specific data is provided to fulfill this requirement at this time.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Backhoe Loader Manufacturing and AssemblyThe contract requires full manufacturing, assembly, and quality assurance for a four-wheel drive backhoe loader equipped with an extendable dipper stick, designed to meet Tier IV emissions standards and deliver a minimum of 85 SAE horsepower. The machine must be housed in a certified ROPS/FOPS cab and be fully operational in extreme cold weather conditions down to -34°F, ensuring reliability in harsh environments. All components and processes must adhere to stringent quality control protocols throughout production to meet performance and safety benchmarks. The contract is classified as a subcontract under NAICS code 333120, with a response deadline of August 7, 2026, and was posted on July 16, 2026. It is being sourced by the State of New Mexico, though the specific office or location for performance is not detailed. Interested parties must submit proposals through the provided online portal before the deadline, and the procurement is open without a specific set-aside designation, allowing all eligible manufacturers to compete.

POSTED

DEADLINE

Stone crusherThe contract is for a single Hog Crusher, a skid steer-mounted concrete crusher designed to reduce material to an inch or smaller with a discharge rate of up to 10 tons per hour. The equipment features heavy plate reinforced construction for durability and includes a one-half yard hopper capacity to handle significant volumes efficiently. The solicitation, designated W911S226U3705, is a combined acquisition under the North American Industry Classification System code 333120, specifically set aside entirely for small businesses as defined by the SBA. It was posted on July 16, 2026, with a response deadline of July 24, 2026, at 3:55 a.m. The contracting activity originates from the Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, and performance is expected to occur at a location with a zip code of 22211. Primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 7036140476.

W6QM Micc-Ft Drum

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4528 5 Cons

Same awarding agency

Boiler MaintenanceThe contract requires the contractor to provide comprehensive maintenance services for 94 existing boilers and water heaters distributed across 71 facilities at Minot Air Force Base in North Dakota. This includes full management of all necessary tools, supplies, equipment, and labor to ensure continuous, reliable operation. The contractor must also handle the removal and proper disposal of outdated units and install up to 12 new boilers per year, with a restriction of no more than two installations within any 30-day period. Additionally, the contractor assumes responsibility for maintaining any newly installed boilers for one year from the date of completion, covering all warranty-related work during that period. The solicitation is a Total Small Business Set-Aside under NAICS code 238220, with a response deadline of August 21, 2026, and was posted on July 20, 2026. It is managed by the Department of Defense through the office located at Minot AFB, with primary and secondary points of contact available for inquiries. The contract includes supporting documents such as the Performance Work Statement, Price Schedule, Provisions and Clauses, Wage Determinations, Financial Questionnaire, and Combined Synopsis/Solicitation, all of which outline the expectations, compliance requirements, and financial terms for the awarded vendor.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 10 hours ago

DEADLINE

in about 1 month

5 CS Carpet CleaningThe 5th Communications Squadron at Minot Air Force Base in North Dakota is seeking a small business contractor to provide annual carpet cleaning services for three designated buildings: 120, 870, and 1088. This opportunity is structured as a total small business set-aside under FAR 19.5, ensuring exclusive eligibility for small businesses certified through the Small Business Administration. The solicitation number is FA452826JT0123, with a posted date of July 16, 2026, and a response deadline of July 23, 2026. The NAICS code 561740 classifies the work under Building Cleaning and Maintenance Services. Points of contact for inquiries include Lt Jacob Trach and Nitra Latta, who can be reached via email and phone provided. The place of performance is clearly identified as Minot AFB, ND, with a ZIP code of 58705. Although the contract description specifies one cleaning per building annually, detailed performance requirements, evaluation criteria, inspection standards, pricing structure, contract administration details, and other mandatory clauses are not provided in the available documentation. Attachment 1, the Performance Work Statement, is referenced but its content is not included. No information is available regarding estimated contract value, delivery schedules, payment terms, insurance requirements, or reporting obligations. The solicitation remains at the presolicitation stage with limited supplemental data, requiring potential offerors to seek out the attached PWS for further details on scope and expectations.

Carpet and Upholstery Cleaning Services

POSTED

DEADLINE

Lagoon Sludge Survey, Sampling, and AnalysisThe contract seeks a Lagoon Sludge Survey, Sampling, and Analysis at Minot Air Force Base in North Dakota under solicitation number FA4528-26-Q-TB-03, with a response deadline of July 27, 2026. The effort is set aside exclusively for small businesses as defined by the SBA, and the North American Industry Classification System code is 541380. All work must be performed at Minot AFB, and funds are not currently available; no award will be made until federal funding is allocated, though an award is anticipated to occur before September 30, 2026 if funds become available. The government retains the right to cancel the solicitation at any time without financial obligation to offerors. Point of contact for inquiries is SSgt Tyler Buckley, with SrA Tristan Cox as secondary contact, both reachable through their respective Air Force email addresses and phone numbers. The solicitation includes attachments covering the combined synopsis, DAF clauses, statement of work, and quote sheet, with all responses required to be submitted via the SAM.gov portal.

Testing Laboratories and Services

POSTED

DEADLINE

JLG Boom Lift RepairThis solicitation, identified as FA452826QCS02 and titled JLG Boom Lift Repair, is a combined RFQ prepared under Revolutionary Federal Acquisition Overhaul 12.201-1 procedures and is 100% set aside for small business concerns under FAR 19.5, with a NAICS code of 811310 and a size standard of $12,500,000. The requirement is for the comprehensive inspection, repair, and recertification of a single JLG M600JP Boom Lift (Equipment #COE92875, SN: 0300141450) at Minot Air Force Base, North Dakota. Work includes replacing all four weather-checked tires with foam-filled Blackstone OTR 36 x 14LL - 22.5 or approved substitutes, performing a full engine oil change with replacement of engine, fuel, and hydraulic filters, repairing a leaking axle lockout cylinder, resealing a leaking wheel hub, replacing a leaking drive motor hose, and inspecting and replacing all worn or damaged parts. All materials used must be new and not refurbished. The inspection and recertification must be conducted by a qualified Mobile Elevating Work Platform (MEWP) service technician in strict compliance with ANSI/SAIA A92.22, manufacturer specifications, and applicable safety bulletins. The contractor is required to provide a formal written certification confirming successful completion of the inspection per these standards and to update the lift’s inspection identification marking with the date of service and the next inspection interval. All safety, instructional, and control markings must be verified for legibility and completeness, and all guards, hydraulic and pneumatic systems, electrical components, structural parts, and tire fasteners must be assessed and corrected to meet operational safety standards. Any deficiencies identified during the inspection must be documented with a detailed report and cost estimates for corrective actions. The work must be performed in accordance with Department of the Air Force environmental policies, which prohibit the use of Class I ozone-depleting substances. Labor compliance is governed by Wage Determination No. 2015-6025 Rev 4, including provisions on uniform allowances and proper classification of service employees. Payment must be processed through Wide Area WorkFlow using the 2in1 invoice for fixed-price services, with payment routed through DoDAAC F87700. Contractors must maintain an active

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Functional Testing and Punch List ResolutionThe contract requires the successful bidder to perform functional testing on all installed units to ensure they operate as intended, verify their performance against specifications, and address any deficiencies or non-compliances identified during testing. All punch list items must be resolved prior to final government acceptance, ensuring that the delivered system meets all operational and technical requirements. The work is to be carried out at Minot AFB, North Dakota, with strict adherence to the timeline set by the government for completion and acceptance. This is a total small business set-aside under NAICS code 541330, reserved exclusively for small businesses as defined by the SBA, and is structured as a subcontract under the Department of Defense. Responses must be submitted by the deadline of July 27, 2026, and the task focuses on technical execution, quality assurance, and final compliance rather than procurement or installation of new equipment. Government acceptance is contingent upon complete resolution of all identified issues and demonstration of full operational capability of all tested units.

Engineering Services

POSTED

DEADLINE

Installation of Ranges and Power CordsThe contract requires the installation of 27 new compact ranges along with UL-listed power cords, encompassing full electrical connection, precise alignment, and thorough functional testing. All work must strictly comply with OSHA and NEC safety and electrical standards to ensure operational integrity and regulatory adherence. The project is scoped for performance at Minot Air Force Base with a ZIP code of 58704, and the work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid as defined by the SBA. The North American Industry Classification System code for this procurement is 238210, indicating it falls under the electrical contracting sector. The solicitation was posted on July 10, 2026, with a response deadline of July 27, 2026, and is managed by the Department of Defense under the agency designation FA4528 5 Cons.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Removal and Disposal of Existing AppliancesThe contract requires the safe removal of 27 existing compact ranges and their associated power cords from dormitory common areas at Minot Air Force Base, with strict adherence to federal and state environmental regulations for proper disposal. All work must be performed in compliance with applicable waste handling and hazardous material protocols to ensure environmental safety and regulatory compliance. The task is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid. The NAICS code 562998 classifies the work under Other Remediation Services, emphasizing the environmental remediation nature of the project. The solicitation was posted on July 10, 2026, with responses due by 6:00 PM ET on July 27, 2026. Performance of the contract is specifically required at Minot AFB, South Dakota, with zip code 58704, and the contracting activity is under the Department of Defense, identified by the agency name FA4528 5 Cons.

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

Supply of UL-Listed Appliance Power CordsThe contract calls for the supply of 27 UL-listed appliance power cords, each rated at 40 amps, 4 feet in length, and configured as 4-wire cords, along with one additional spare cord for redundancy. These cords must be compatible with specified compact range appliances and meet all relevant UL safety standards. The requirement is classified under NAICS code 335999 and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provision, ensuring eligibility is limited to firms certified as small by the Small Business Administration. The order is issued as a subcontract under the Department of Defense, specifically through the FA4528 5 Cons agency, with performance required at Minot Air Force Base, North Dakota, 58704. All bids must be submitted by the deadline of July 27, 2026, at 6:00 PM Eastern Time, with the solicitation publicly posted since July 10, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Supply of Compact RangesThe contract seeks the supply of 27 new compact ranges with one additional unit provided as a spare, all must comply with detailed technical specifications including correct voltage, number of burners, physical dimensions, and integrated safety indicators. The requirement is part of a Total Small Business Set-Aside under the SBA program, exclusively open to small businesses, and is classified under NAICS code 335221 for household cooking appliance manufacturing. The solicitation was posted on July 10, 2026, with responses due by July 27, 2026, and performance is required at Minot Air Force Base, North Dakota, zip code 58704. The contract is structured as a subcontract within the Department of Defense procurement framework, managed under the FA4528 5 Cons agency designation.

Household Cooking Appliance Manufacturing

POSTED

DEADLINE

Transportation and Freight Delivery to Minot AFBThe contract requires the secure transportation of a snow pusher from the supplier to Minot Air Force Base, with full responsibility for load securement, route optimization, and adherence to all federal delivery and reporting mandates. The work must be executed in compliance with Department of Defense standards and include timely documentation to meet federal tracking and accountability requirements for the delivery. This is a subcontract set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, classified under NAICS code 484220 for truck transportation. The solicitation was posted on July 10, 2026, with responses due by July 27, 2026, and the performance location is specified as Minot AFB, North Dakota, with a zip code of 58704. The contracting office is FA4528 5 Cons under the Department of Defense, and the full scope of work hinges on reliable logistics execution without deviation from federal compliance protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Equipment Installation and On-Site Integration SupportThe contract requires on-site installation, coupling, and compatibility verification of a snow pusher with a John Deere 724K Loader at Minot Air Force Base, ensuring seamless integration and operational functionality. The work must be performed at the designated location with all necessary equipment and expertise to confirm that the snow pusher is properly adapted to the loader without compromising performance or safety. Operator orientation will be provided if deemed necessary to ensure proper使用 and maintenance of the integrated system. This is a total small business set-aside subcontract under NAICS code 811310, open exclusively to small business concerns as defined by the SBA, with a response deadline of July 27, 2026. The contract is issued under the Department of Defense through agency FA4528 5 Cons, with performance required at Minot AFB in zip code 58704. Participation is limited to eligible small businesses, and the solicitation is posted on SAM.gov, with no public point of contact listed for inquiries.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Snow Pusher 26A 14-foot sectional snow pusher with a coupler designed specifically for the John Deere 724K Loader is being procured under contract titled Snow Pusher 26, solicitation number FA452826QAS02, with the model number HD-14. The equipment will be delivered to Minot Air Force Base in North Dakota, with the place of performance listed as Minot AFB, ZIP 58704. The pusher must meet specified clearance width requirements and be compatible with the designated loader model, as detailed in the provided attachment. The solicitation, posted on July 10, 2026, has a response deadline of July 27, 2026, and is a combined solicitation under a Total Small Business Set-Aside as defined by FAR 19.5, with NAICS code 333120. The contracting office is part of the Department of Defense, managed by the agency FA4528 5 Cons, and primary point of contact is A1C Anthony Salvestrini, with SrA Tristan Cox as secondary contact, reachable via phone and email provided.

Construction Machinery Manufacturing

POSTED

DEADLINE