Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Softwood Lumber Supply and Milling

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, governs the supply and milling of 2,665 board feet of softwood dimension lumber. The materials must be surfaced on four sides and maintain a moisture content of 19% or less. To ensure compliance with ALSC standards, all lumber must include heat treatment certification marked with the HT designation. The contract is categorized under NAICS code 321911 and was posted on June 25, 2026.

General Info

DLA subcontract for 2,665 board feet of heat-treated softwood dimension lumber.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

321911 - Wood Window and Door Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8E626F1067.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LUMBER, SOFTWOOD, DIM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 25

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 2,665 board feet of softwood dimension lumber, surfaced four sides (S4S), with moisture content not exceeding 19%, including heat treatment certification marked 'HT' per ALSC standards.

Similar Contracts

Same NAICS industry code

ENplus A1 Biomass Wood Pellet SupplyThis subcontract agreement involves the supply of sustainably sourced biomass wood pellets for prime contractors working on projects for Wythenshawe Community Housing Group Limited. The provider is required to deliver approximately 200 tonnes of wood pellets annually, ensuring all materials strictly adhere to the ENplus A1 specification. To maintain compliance, the supplier must provide comprehensive documentation regarding sustainable sourcing and specific environmental impact metrics. The solicitation was posted on October 26, 2026, with a response deadline set for November 20, 2026.

Wythenshawe Community Housing Group Limited

POSTED

DEADLINE

Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.

Nashville Electric Service

POSTED

DEADLINE

Treated Wooden Utility Pole SupplierThis subcontract agreement establishes a partnership for the supply of treated wooden utility poles to prime contractors working on Nashville Electric Service material supply projects. The scope of work specifically requires the provision of 50 ft. Class 2 poles, which must be manufactured from either Southern Pine or Douglas Fir in strict accordance with NES Specifications 33-151R13 and 33-252R10. Additionally, all supplied poles must be roofed and gained according to NES Drawing 910. The selected supplier is responsible for the delivery of these materials to designated yards located in Nashville, Tennessee. This opportunity falls under NAICS code 321911 and is managed by the Nashville Electric Service. Interested parties must adhere to the established timeline, with a response deadline set for November 3, 2026.

Nashville Electric Service

POSTED

DEADLINE

Internal Doors & Linings Supply (East)This subcontract agreement involves the supply of internal doors and linings for prime contractors working on Orbit Group Limited projects located in the East of England. The selected provider will be responsible for delivering internal door sets and linings to various sites, ensuring all materials strictly adhere to tenure specifications, house type schedules, and provided technical drawings. The opportunity is categorized under NAICS code 321911 and was posted on October 22, 2026. Interested parties must submit their responses by the deadline of November 2, 2026, at 12:00 PM.

Orbit Group Limited

POSTED

DEADLINE

Engineered Structural Wood SupplyThis subcontract for Engineered Structural Wood Supply involves providing structural composite lumber and engineered rim boards to prime contractors for AC Transit facility projects located in Hayward, California. The scope of work includes the delivery of engineered wood beams tailored to specific layout and span requirements, as well as the submission of detailed material takeoff tables and framing layouts for both floors and roofs. The opportunity was posted on October 22, 2026, with a response deadline of December 1, 2026. Operating under NAICS code 321911, the contract focuses on the specialized supply and technical planning of engineered wood components necessary for the structural integrity of the agency's facility improvements.

POSTED

DEADLINE

in about 1 month

Custom Millwork & CasegoodsThis subcontract opportunity involves the fabrication and installation of custom built-in desktops for prime contractors working on USACE Armed Forces Career Center projects in San Antonio, Texas. The scope of work requires the production of desktops with a minimum depth of 24 inches, set at 30 inches above finished floor, featuring rear grommets and under-desktop support braces. All units must be finished using Formica #927 Folkstone, 58 Matte plastic laminate. Managed under the Department of Defense through the W072 Endist Louisville agency, this project falls under NAICS code 321911 for custom millwork and casegoods. Interested parties must submit their responses by the deadline of October 30, 2026.

W072 Endist Louisville

POSTED

DEADLINE

THRB - 16579 - Restore/Replace Damaged Windows/Shutters at THRBThe Department of the Interior is forecasting a project to rehabilitate the primary exterior windows on the front of the THRB building. This scope of work involves the restoration and replacement of damaged wood windows, including the sashes, frames, hardware, and shutters. The project is categorized under NAICS code 321911 and was posted on September 2, 2026. Amy L. Sebring serves as the primary point of contact for this effort, with additional support provided by the Contract Support Center.

POSTED

about 2 months ago

DEADLINE

Construction Plywood SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply of construction-grade plywood in AA, AB, and BB grades. The materials must be delivered in waterproof-wrapped and labeled units that do not exceed 36 inches in height, ensuring full compliance with military packaging and labeling standards. The contract is categorized under NAICS code 321911 and was posted on August 17, 2026. All deliverables must adhere to the specific technical requirements and military specifications outlined for the procurement of construction materials.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Custom Plywood BoxesThis subcontract with the Defense Logistics Agency involves the manufacture and delivery of 40 custom plywood boxes measuring 144.5 by 48.5 by 3.5 inches. The production must adhere to ASTM D3951 and modified ASTM B-660 standards to ensure compliance with specific technical requirements. The items are to be delivered F.O.B. Destination to Tinker AFB. This procurement falls under NAICS code 321911 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Softwood Lumber SupplyThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the supply of heat-treated and graded softwood lumber in various dimensions. The contractor is responsible for ensuring all materials are packaged and labeled according to strict military specifications to maintain quality and compliance during transport. The scope of the agreement includes the delivery of these materials to both CONUS and various overseas locations. Classified under NAICS code 321911, the contract ensures a steady supply of lumber products to support Department of Defense operations globally.

Defense Logistics Agency

POSTED

DEADLINE

Pallet Supply and Certification ServicesThis subcontract with the Defense Logistics Agency under the Department of Defense requires the supply of winged pallets. All provided units must be heat-treated, certified, and stamped in strict accordance with MD00100452 Rev C and applicable DOD standards. The agreement falls under NAICS code 321911 and was posted on August 10, 2026. The contract ensures that all materials meet specific military specifications for durability and certification to support defense logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

Structural Plywood Supply – EN 636-3S (European Standard)The contract involves the supply of structural plywood compliant with EN 636-3S, a European standard ensuring high durability and moisture resistance, specifically for overseas defense construction projects. The material must meet stringent performance criteria to withstand harsh environmental conditions encountered in military infrastructure applications. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 321911 indicating classification within wood product manufacturing. The work is intended for international deployment, though the exact location of performance is not specified. The solicitation was posted on August 5, 2026, and can be referenced through the DIBBS system using the provided contract and delivery identifiers.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 22 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aircraft Window Panel Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Softwood Plywood Supply (Construction Grade)

Defense Logistics Agency

POSTED

DEADLINE

Plywood Supply for Military Use

Defense Logistics Agency

POSTED

DEADLINE

Softwood Lumber Supply (Other Dimensions/Grades)

Defense Logistics Agency

POSTED

DEADLINE

Softwood Lumber Supply (2x6, No. 2 Grade, S4S)

Defense Logistics Agency

POSTED

DEADLINE

Softwood Plywood Supply (Construction Grade)

Defense Logistics Agency

POSTED

DEADLINE

Specialty Treated Wood & Piling Supply

Defense Logistics Agency

POSTED

DEADLINE

Softwood Lumber Supply (Dimensional & BOA)

Defense Logistics Agency

POSTED

DEADLINE

Softwood Plywood Supply

Defense Logistics Agency

POSTED

DEADLINE

WINDOW PANEL, AIRCRA

Solicitation # SPE4A726P4695

Defense Logistics Agency

POSTED

DEADLINE

Softwood Lumber (Boards) Supply

Defense Logistics Agency

POSTED

DEADLINE

Construction Plywood Supply

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS