Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Solar Powered LED Strobe Lights

Active
W8486-260728/AInternational

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of National Defence is seeking solar-powered LED strobe lights with a red light output, specified under UNSPSC 39110000 and part number 3337-00001, with NCAGE code 0GWV8 or an equivalent alternative. The requirement is for delivery to two locations: 25 CFSD Montreal at 6363 Rue Notre Dame St E in Montreal, Quebec, and 7 CFSD Edmonton at 195 Ave & 82nd Street in Edmonton, Alberta. Each item is quoted per unit, and bidders proposing substitute or equivalent products must clearly identify the brand, model, part number, and NCAGE code of the alternative being offered. The Crown reserves the right to negotiate terms with any supplier during the procurement process. All documentation may be submitted in either English or French, Canada’s official languages. The solicitation, titled Solar Powered LED Strobe Lights, is identified by number W8486-260728/A and was posted on July 29, 2026, with a deadline for responses set for September 7, 2026, at 7:00 PM Eastern Time. The procurement is conducted under the Government of Canada’s federal procurement framework, managed by the Department of National Defence, with Robert Coffin serving as the primary contracting authority, reachable via robert.coffin@forces.gc.ca. The place of performance covers both Quebec and Alberta, excluding the National Capital Region. Bidders must ensure compliance with delivery specifications and provide full details for any proposed alternative product to be considered valid.

General Info

Solar-powered LED strobe lights, red output, delivery to Montreal and Edmonton, bid deadline September 7, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

335139 - Electric Lamp Bulb and Other Lighting Equipment ManufacturingView NAICS

Place of Performance

Alberta, Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
Contacts
Robert CoffinContracting Authority
contact@example.gov

Full Description

Show more
The Department of National Defence has a requirement for the items detailed below. The delivery is requested at 25 CFSD Montreal 6363 Rue Notre Dame St E. Montreal, QC, H1N 3V9 and 7 CFSD Edmonton 195 Ave & 82nd Street Edmonton, Alberta, T0A 2H0. Item 1, LGHT INDCTG;STROBE,SOLOR,RED UNSPSC: 39110000 Part No.: 3337-00001, NCAGE: 0GWV8 OR EQUIVALENT Unit of Issue: EA Delivery Location: Department of National Defence, 25 CFSD Montreal 6363 Notre Dame Est, Montréal, QC H1N 3V9 Item 2, LGHT INDCTG;STROBE,SOLOR,RED UNSPSC: 39110000 Part No.: 3337-00001, NCAGE: 0GWV8 OR EQUIVALENT Unit of Issue: EA Delivery Location: Department of National Defence, 7 CFSD Edmonton 195 Ave & Ordance Road, AB T0A 2H0 Canada Bidders proposing an Equivalent or a Substitute Product must indicate the brand name and model and/or Part Number and the NCAGE they are offering. The Crown retains the rights to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

Similar Contracts

Same NAICS industry code

NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A6-26-T-10FL
This contract specifies the procurement of 263 units of an incandescent lamp identified by part number 4300, with NSN 6240-00-828-3039, to be delivered FOB origin within 171 days to Arizona Industries for the Blind in Phoenix, Arizona. The lamp is classified as a commercial item and must comply with industry trade specifications for a “Mogul End Prong” type, with strict requirements prohibiting the intentional addition of mercury or mercury-containing compounds to any part of the product or its packaging, except for functional uses in specific applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shock proof and feature a secondary containment boundary as per NAVSEA 5100-003D, and mercury is also strictly forbidden in preservation, packaging, and marking processes. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise directed, and attributes are to be classified withVerification Levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. Packaging must meet MIL-STD-2073-1E and MIL-STD-129 standards, including special fragile marking and approved palletization per DLA guidelines. Documentation for source approval is required, and the item is marked as a critical application with no shelf life restriction. Delivery is scheduled by January 25, 2027, with a required delivery date of November 13, 2026, and unit price and total cost are fixed at $263.00 per unit. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and all supply chain participants must adhere to defined identification and documentation protocols, including the use of authorized commercial sources such as Pacific Custom Components Corporation, Gregory Thomas Inc., and General Electric Company.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
CONTROL, ELECTRIC LIGHT
Solicitation # SPE4A6-26-R-XC10
This contract involves the procurement of 14 units of CONTROL, ELECTRIC LIGHT with NSN 6210-01-546-0209 under solicitation SPE4A6-26-R-XC10, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 224 days after award, with a firm fixed price and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item is shipped FOB origin. Packaging must comply with MIL-STD-2073-1E, using packaging code U, with marking in accordance with MIL-STD-129 including the fragile special marking code. Palletization must adhere to DLA Packaging Requirements for Procurement. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and the contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned verification level VII with an AQL of 0.1. The item is designated as a critical application item and must be manufactured without government identification if rejected. Transportation, freight, and delivery logistics are governed by DLAD procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335139
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-R-XB95
The contract specifies the procurement of 85 units of a LIGHT, INDICATOR with NSN 6210-01-483-6350 under solicitation SPE4A6-26-R-XB95, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 300 days after award, with FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E using preservation method 10, unit container E5, and packaging code U, with marking adhering to MIL-STD-129 and no special marking required. All packaging and preservation materials are strictly prohibited from containing mercury or mercury compounds. The item is designated as a critical application item for Electric Boat Corporation with part number H673-7203-002 and must be identified as such. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury or mercury-containing substances are banned from direct contact with the item except in specifically authorized applications like fluorescent lamps, batteries, or sensors, which must include shock-proof design and a secondary containment boundary complying with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. The unit of issue is the each, and transportation directives reference DLAD procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335139
New
DIBBS
Fluorescent Lamp SupplyThe contract requires the supply of five fluorescent lamps identified by NSN 6240013646965, with strict adherence to specified manufacturer part numbers to ensure compatibility and performance. Delivery must be made to Fort McCoy, Wisconsin, with the zip code 54656-5131 as the designated place of performance. The solicitation is classified as a subcontract under NAICS code 335139, indicating it falls within the category of other lighting equipment manufacturing. The Defense Logistics Agency, acting on behalf of the Department of Defense, is the contracting organization responsible for this procurement. The opportunity was posted on July 28, 2026, with responses due by August 10, 2026, leaving a 13-day window for potential suppliers to submit proposals. All parties must meet the technical and logistical requirements outlined by the agency to fulfill the order successfully.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335139
New
DIBBS
Incandescent Lamp Manufacturing and SupplyThe contract requires the full production and delivery of 71 incandescent lamps to meet Department of Defense specifications, with strict adherence to DOD packaging, labeling, and hazardous materials regulations. All aspects of manufacturing and shipment must align with federal standards for handling and transporting sensitive components, ensuring safety and compliance throughout the supply chain. The performance location is designated as 08057 in New Jersey, requiring the contractor to coordinate logistics and production in alignment with this geographic requirement. This subcontract, issued under NAICS code 335139 by the Defense Logistics Agency under the Department of Defense, has a response deadline of August 10, 2026, following a posting date of July 28, 2026. The solicitation is accessible through the DIBBS platform, and while no specific set-aside criteria are listed, the nature of the requirement implies a high level of regulatory scrutiny and quality control. The contractor must be prepared to meet stringent documentation and certification obligations related to hazardous materials, as failure to comply would result in rejection of the deliverables regardless of technical performance.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335139
New
DIBBS
Supply of Light-Emitting Lamp (LED) – NSN 6240124033569The contract requires the supply and delivery of a single NSN-compliant LED lamp, part number D6046 34000-7, with the National Stock Number 6240124033569, to be shipped to FPO, Japan, zip code 96349, within five days of order placement. The item must fully comply with all applicable federal and defense specifications to ensure operational suitability and interoperability within military systems. The solicitation is classified as a subcontract under NAICS code 335139, issued by the Defense Logistics Agency on behalf of the Department of Defense, with a response deadline of August 10, 2026. Delivery must meet stringent timelines and quality standards, with performance location specified as a military postal address, indicating the end use is for a U.S. defense installation overseas. The contract does not specify a set-aside status, meaning it is open to all eligible private sector suppliers meeting the technical and logistical requirements.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335139
New
DIBBS
Flashlight Supply and DeliveryThe contract entails the supply and delivery of four units of flashlight, specifically model P/N 2735-20 with NSN 6230016522894, requiring full compliance with military packaging, labeling, and hazardous materials handling standards. All items must be delivered FOB Origin, with a strict delivery deadline of 20 days from the award date. The procurement falls under NAICS code 335139 and is classified as a subcontract issued by the Defense Logistics Agency under the Department of Defense. The place of performance is identified as Springfield with ZIP code 65803-9513, and the solicitation was posted on July 28, 2026, with responses due by August 10, 2026. The contract is accessible via the DIBBS portal using the reference number SPE8E726T3422.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE8E7-26-T-3417
The contract pertains to the procurement of incandescent lamps under solicitation SPE8E7-26-T-3417, issued by the Defense Logistics Agency for the Department of Defense. The item, identified by NSN 6240014394590 and part numbers 7916635-03 and OL-6852BPE-AS15-02, requires delivery of 71 units across two contract line items, with a unit price of $69.00 and $2.00 respectively, totaling a combined value of $4,861. Delivery is required FOB origin within 20 days of contract award, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, which is the Combat Systems Engineering Site in Moorestown, New Jersey. Packaging must adhere strictly to DLA’s Master List of Technical and Quality Requirements, prioritizing these over ASTM D3951, and must comply with MIL-STD-129 labeling and RP001 palletization standards. If the item is non-hazardous per FED-STD-313, it must be commercially packaged per ASTM D3951; if hazardous, it must meet IP025 requirements. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post. The required delivery date is January 13, 2026, and the contract references technical quality specifications accessible through the DLA eProcurement portal. All items must be marked with appropriate government and supplier identification as governed by procurement directives, and the point of contact for inquiries is Kelly Mitchell at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335139
New
DIBBS
FLASHLIGHT
Solicitation # SPE8E7-26-T-3422
The contract is for the procurement of four flashlights with NSN 6230-01-652-2894 under solicitation SPE8E7-26-T-3422 issued by the Defense Logistics Agency, with a total contract value of $4.00. Delivery is required within 20 days of shipment, with FOB origin terms placing responsibility on the contractor until the goods leave the shipping point. The delivery destination is W81PNC in Springfield, Missouri, and all shipments must be sent via traceable means, excluding parcel post. The items must comply with DLA’s Master List of Technical and Quality Requirements, with packaging governed by ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified as hazardous under FED-STD-313. All packaging and labeling must conform to MIL-STD-129, including barcoding, and palletization must follow RP001 DLA Packaging Requirements. Inspection and acceptance occur at the destination. The contract incorporates numerous FAR clauses including inspection at destination, changes, subcontracting, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, and cybersecurity safeguards, all of which have been modified under deviation 2026-00038. The solicitation is a simplified acquisition using the SF-18 form and must be submitted electronically through DIBBS by August 10, 2026. The contractor must maintain a valid UEI and CAGE code, and representations regarding small business status, socioeconomic certifications, and defense telecommunications equipment must be accurately disclosed. Payment is processed via WAWF, and the contracting officer retains authority to determine the contract type at award, with no options or additional CLINs specified.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335139
New
DIBBS
LAMP, FLUORESCENT
Solicitation # SPE8E7-26-T-3415
The contract calls for the procurement of five fluorescent lamps certified under NSN 6240013646965, with acceptable part numbers including Philips 62607 P/N F25T8/TL841 and General Electric LAMP 08804 P/N F25T8/SPX41. Delivery is required within 20 days to Fort McCoy, Wisconsin, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically RP001, and must adhere to MIL-STD-129 marking standards. If the lamps are not classified as hazardous under Fed-Std-313, commercial packaging per ASTM D3951 is permitted, but DLA requirements override any conflicting standards. Palletization must follow DLA packaging guidelines, and shipment must be sent via traceable freight methods—parcel post is prohibited. The unit of issue is each, with a total price of $5.00 per lamp, and the contract is governed by solicitation number SPE8E7-26-T-3415, issued by the Defense Logistics Agency. The required delivery date is January 5, 2026, with the point of contact being Kelly Mitchell, and all documentation must reference the government’s required traceability identifiers and delivery instructions.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A6-26-T-07VN
The contract pertains to the procurement of five incandescent lamps with NSN 6240-01-054-6996 under solicitation SPE4A6-26-T-07VN, issued by the ASC Commodities Division of the Department of Defense. The delivery is FOB origin with a required delivery date of February 12, 2027, and a performance period of 198 days from award. The end destination is Industries of the Blind Inc in Greensboro, NC, and all items must be inspected and accepted at the destination. Packaging must conform to MIL-STD-2073-1E with packaging code U, preservation method 10 (cleaning and drying only), and unit container D3, while intermediate containers are designated as E5. Marking must adhere strictly to MIL-STD-129, including barcoding and hazardous material labeling per 29 CFR 1910.1200, with no special marking required. Palletization follows DLA’s RP001 packaging requirements. Quality assurance mandates sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The contract includes extensive regulatory compliance clauses related to hazardous materials, requiring submitter-provided Safety Data Sheets (SDS) compliant with Federal Standard No. 313 and 29 CFR 1910.1200, and labeling of any radioactive content exceeding 0.002 microcuries per gram or 0.01 microcuries per item. Cybersecurity requirements are enforced via DFARS 252.204-7012 and NIST SP 800-171 assessment obligations. Contractors must be registered in SAM with a valid UEI and CAGE code, and are subject to provisions on equal opportunity for workers with disabilities, whistleblower rights, and restrictions on covered defense telecommunications equipment. Invoicing must be conducted exclusively through Wide Area WorkFlow (WAWF), and the solicitation references socioeconomic preferences, with potential application of HUBZone price evaluation adjustments. No pricing
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 335139
New
DIBBS
LAMP, LIGHT EMITTING
Solicitation # SPE8E7-26-T-3430
The contract solicitation SPE8E7-26-T-3430 issued by the Defense Logistics Agency under the Department of Defense seeks one unit of a LAMP, LIGHT EMITTING with NSN 6240124033569 and part number D6046 P/N 34000-7, priced at $1.00 per unit, for delivery within five days after order placement to Yokosuka, Japan, under FOB Destination terms. The item is governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards like ASTM D3951 when applicable, and must be packaged and labeled in strict accordance with MIL-STD-129, including GS1 barcode compliance and hazard communication per 29 CFR 1910.1200 if classified as hazardous under FED-STD-313; non-hazardous items follow commercial packaging guidelines unless overridden by DLA technical requirements. Palletization must conform to RP001, and special handling is required if the item qualifies as hazardous, in which case TQ Requirement IP025 applies. Inspection and acceptance occur at the destination location, with the government retaining authority for compliance verification. The contract enforces numerous FAR and DFARS clauses related to supply chain integrity, cybersecurity, labor practices, and compliance, including 52.246-2 for inspection, 52.227-1 for government authorization, 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, and 252.223-7001 for hazard warning labeling. Payment must be processed electronically via Wide Area WorkFlow, and contractors are required to provide a current Unique Entity ID and CAGE code, with representations on size status, socioeconomic certifications, and compliance with anti-trafficking and employment eligibility verification requirements. The solicitation has a response deadline of August 10, 2026, and proposals must be submitted exclusively through the DLA Internet Bid Board System. Delivery is to a U.S. military facility at Yokosuka Naval Base with a designated parcel post address for documentation, and the contract includes no options or extended delivery terms. All technical specifications, packaging, and labeling requirements take precedence over any commercial practices, and deviations are not permitted without formal amendment.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 339113
New
International
SAR Vacuum Spine Boards
Solicitation # W3999-270001
The Department of National Defence is seeking to procure twenty-seven lightweight vacuum spine boards under solicitation W3999-270001, with all deliverables required to be received by 5 October 2026 and the contract period running until 5 December 2026. The spine boards must be approximately six feet in length,具备 a chambered vacuum bead system for enhanced immobilization during airlift, vertical rescue, and austere SAR operations, and must be radiolucent, MRI-compatible, latex-free, and resistant to puncture, abrasion, moisture, and bodily fluids. Each unit must include a manual vacuum pump with no external power requirement, a complete restraint strap system, integrated carry handles for multiple lifting configurations, and be compactly foldable or rollable for aircraft storage. The product must be compatible with existing rigid spine boards and the Ferno Cot transport system. All items must be new, conform to the latest specifications, and be delivered Delivered Duty Paid to CFB Winnipeg 17 Wing, 715 Wihuri Road, Winnipeg, Manitoba, under Incoterms 2020, with all customs duties, GST/HST, and excise taxes included in the quoted price. Payment will be made at a fixed price upon delivery, with undisputed invoices settled within 30 days of receipt, subject to a mandatory 15 percent tax withholding by the Canada Revenue Agency. Award will be made to the lowest priced compliant offer, with all submissions evaluated against mandatory technical criteria; failure to meet any of these criteria results in non-responsiveness. Proposals must be submitted electronically in three sections—Technical Offer, Financial Offer, and Offer Submission Forms—with supporting documentation in either English or French, and must remain valid for 60 days beyond the closing date of 25 August 2026. Offers may not exceed five megabytes unless submitted across multiple emails, and must avoid embedded scripts or macros. The Contractor must certify compliance with Canada’s Code of Conduct for Procurement, lack of conflict of interest, and that goods are not produced using forced labor. The Contractor is also required to maintain valid AIEE status, use environmentally preferable packaging where feasible, and ensure all packaging materials are reusable, returnable, or recyclable, excluding packaging tape. The contract is governed by the laws of Manitoba, requires written amendments, prohibits assignment without Canada’s consent, and includes a 12-month warranty. The Contracting Authority is Adam Bidzinski
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 335313
New
International
CIRCUIT BREAKERS
Solicitation # W8482-264981/A
The Department of National Defence is soliciting bids for 80 circuit breakers, with 40 units required for delivery to CFB Halifax and 40 units to CFB Esquimalt, under solicitation number W8482-264981/A. Each unit must be the Siemens Energy Global GmbH & Co. KG part number 3RV2041-MA10, identified by NCAGE D1149 and GSIN 5925, with bids for equivalent or substitute products permitted provided full technical details and manufacturer information are submitted. The contract follows a Lowest Price Technically Acceptable (LPTA) methodology, where compliance with mandatory technical, packaging, marking, and preservation standards is a pass/fail requirement, and award will go to the lowest-priced compliant offer. All products must adhere to Canadian Forces packaging standards D-LM-008-001/SF-001 and marking standards D-LM-008-002/SF-001, while international contractors must meet NATO TL8100-0100 guidelines. Items must be packed on standard wooden pallets, properly labeled with UCC/EAN-128 barcodes using Application Identifiers for PSCN or NSN, and include all required human-readable data such as manufacturer name, part number, manufacture date, and expiration date. Each item must be stamped or etched with the manufacturer and part number. Deliveries are to be made DDP to the specified military bases, with payment processed electronically via direct deposit or wire transfer to designated Canadian Forces accounts. The contract requires strict adherence to defense-specific clauses covering controlled goods, anti-forced labor, international sanctions, data protection, and security clearance obligations, with the Government retaining the right to inspect goods at any point in the supply chain. Contractors must certify Canadian content eligibility and comply with all applicable procurement ethics, including the Federal Contractors Program for Employment Equity, and provide comprehensive documentation including technical and financial offers in English or French through the Government Electronic Tendering Service or CPC Connect by the deadline of August 10, 2026, at 14:00 EDT. No contract value is specified, and pricing must be submitted in separate spreadsheet and PDF formats, with the PDF deemed authoritative in case of discrepancies.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334513
New
International
Fluke 5560A/2G Multi-Product Calibrators
Solicitation # W8486-270947A
The Department of National Defence, under the Government of Canada, has issued a solicitation for the procurement of Fluke 5560A/2G Multi-Product Calibrators, with a response deadline of August 12th, 2026, and a requested delivery date of January 15th, 2027. Each calibrator must be accompanied by a Certificate of Calibration dated no more than 90 days prior to delivery, ensuring recent and verified accuracy. The solicitation, identified by number W8486-270947A, was published on Buyandsell on July 29th, 2026, and will remain active for 15 calendar days. The contract is open to federal procurement, with no specific set-aside designated, and performance is anticipated to occur in Canada. Viktoria Melnichuk serves as the primary point of contact for inquiries, reachable via email and phone, and all bids must be submitted through the official tender portal before the deadline.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
International
Electrical Load Banks
Solicitation # W6369-27-X002
The Department of National Defence, through Defence Research and Development Canada, is seeking to procure Electrical Load Banks to support field trials at an Arctic site and the Over The Horizon Radar test bed at the Shirley’s Bay location in Ottawa. The requirement is part of the broader OTHR Initiative and mandates that all deliverables be ready for shipment no later than 90 days after contract award. The procurement is conducted under the Canadian Free Trade Agreement and the Canada-Korea Free Trade Agreement and is subject to a Comprehensive Land Claims Agreement. The Crown intends to award a single contract based on the highest combined rating of the Inuit Benefit Plan commitment and price, with no limitation to firms registered in the Inuit Firm Registry, and retains the right to negotiate with any supplier. There is no security clearance requirement for this procurement. Proposals must be submitted by July 31, 2026, and may be filed in either official language of Canada. The contracting authority is Scarlet Torraka Almendarez, reachable via email at scarlet.torrakaalmendarez@forces.gc.ca, and the solicitation number is W6369-27-X002. The Department reserves the right to withhold award regardless of the submissions received, and in the event of a discrepancy between the notice and the full request for proposals, the RFP takes precedence. No contract currently exists for this requirement.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333613
New
International
Transmission Spares
Solicitation # W8482-265030/A
The Department of National Defence is seeking proposals for transmission spares to support Halifax-class warships, with deliveries required at Canadian Forces Base Halifax and Canadian Forces Base Esquimalt. The procurement encompasses a comprehensive list of marine propulsion and drivetrain components including controllable pitch propellers, hydraulic pump units, plumber bearings, thrust blocks, main gearing assemblies, turning gear, power turbine shaft brakes, clutch assemblies, sealing systems, and instrumentation. A total of 18 distinct items are specified, covering critical mechanical systems aboard the fleet’s frigates, ensuring operational readiness and maintenance continuity. All offers must comply with the detailed instructions, clauses, and terms outlined in the solicitation, and successful bidders will be bound by the resulting contract terms. Submissions must include the Annex Offeror Submission Details in both original Excel and PDF formats, along with the Annex Offeror Submission Form and Annex Offeror Declaration Form in PDF. Contractors proposing equivalent or substitute products must clearly identify the brand, model or part number, and NCAGE code of the alternative item. The Crown reserves the right to negotiate with any proposed supplier, and all documentation may be submitted in either English or French. The solicitation, identified as W8482-265030/A, was posted on July 29, 2026, with responses due by September 28, 2026. Proposals should be directed to Davide Gallo Bamford, the Contracting Authority, and further requirements are detailed in the attached Statement of Requirements.
Mechanical Power Transmission Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 722320
New
International
NPP-Catering Services for BNQ in Halifax NS
Solicitation # W3371-26-T007_NPP
The Government of Canada, through the Department of National Defence, is soliciting offers for catering services at HMCS Scotian in Halifax, Nova Scotia, to support the Royal Canadian Navy. This contract opportunity, identified by solicitation number W3371-26-T007_NPP, was posted on July 29, 2026, with a response deadline of August 10, 2026, at 8:00 p.m. Eastern Time. Offers must be submitted by qualified vendors capable of delivering comprehensive, reliable, and quality meal services tailored to the operational needs of naval personnel stationed at the facility. The place of performance is specifically located in Halifax, NS, and all services are expected to meet federal standards for food safety, nutrition, and service delivery in a military environment. Timothy Pelletier serves as the primary point of contact for this solicitation, reachable via phone at 902-427-4428 or email at timothy.pelletier@forces.gc.ca, and acts as the Contracting Authority for the process. The opportunity is open to federal procurement participants without a specified set-aside classification, meaning all eligible offerors can compete. Interested parties must review the full tender details on the CanadaBuys website to ensure compliance with all technical, administrative, and operational requirements prior to submission. The contract will support the daily functioning of a key Royal Canadian Navy installation, emphasizing consistency, discipline, and adherence to military protocols in all aspects of catering operations.
Caterers

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 337214
New
International
Privacy on Demand (PODs) Cat 4
Solicitation # W2186-SPO-26-309-B
The Department of National Defence is seeking commercial off-the-shelf Privacy on Demand (POD) units under Category 4 of the Furniture for Workspaces Supply Arrangement, requiring supply, delivery, installation, commissioning, and conformity verification of up to fourteen units total—ten Small PODs and four Large PODs—with one firm Small and one firm Large unit guaranteed, and up to nine additional Small and three additional Large units optional, subject to written exercise by the Contracting Authority. Each unit must be freestanding, non-structural, demountable, relocatable, fully accessible, and equipped with a standard adjustable roof system, integrated active ventilation, LED lighting, occupancy sensing, and a certified electrical-power system, all compliant with Canadian fire-safety, life-safety, accessibility, and electrical codes. Units must be installed without interfering with egress routes, sprinklers, or fire-protection systems, and no connection to building fire-alarm or electrical systems is required; such coordination falls to Real Property Operations. All components must be certified for use in Canada, and the units must conform to the specified Product Builders and Annex Requirements without customization or complex integration. Work is to be performed exclusively at the National Defence Headquarters—Carling Campus, 60 Moodie Drive, Ottawa, Ontario, with deliveries received at the Service Centre loading dock and freight elevators available for transport. Firm installations are anticipated in Building 3, first floor, and Building 10E, second floor, while possible optional locations include Buildings 5, 6, 7, and 9 on specified floors. Internal installation sites are not separate contractual locations but part of a single site. Only suppliers qualified under the Supply Arrangement E60PQ-140003/D are eligible, and all offerors must hold a valid Designated Organization Screening; personnel accessing sensitive sites require Reliability Status, with Canada providing escorts as needed. Offers must be submitted in English or French by August 28, 2026, to Jean-Philippe Dufault at the designated email, with all inquiries due five business days prior to the deadline. The solicitation adheres to the Policy on Reciprocal Procurement and is governed by the Contract Security Program’s detailed requirements outlined in accompanying documents.
Office Furniture (except Wood) Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 333415
New
International
Evaporative Cooler requirement
Solicitation # W3915-27-0012
The Department of National Defence is seeking proposals for the supply of five portable evaporative coolers, each required to effectively cool an area of 6500 square feet while weighing no more than 225 pounds. The solicitation, identified by number W3915-27-0012, was posted on July 29, 2026, with responses due by August 18, 2026. Proposals may be submitted in either English or French, and there is no security clearance requirement for suppliers. The equipment is intended for use in New Brunswick and Nova Scotia, and the Crown reserves the right to engage in negotiations with interested suppliers. All correspondence and submissions should be directed to Timothy Herrington, Contracting Authority, at procurementCADTC@forces.gc.ca.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 19 days
View Details
NAICS: 541611
New
International
Controlled Goods Program (CGP) Compliance SupportThe contract involves providing advisory services to ensure full compliance with Canada’s Controlled Goods Program under the Defence Production Act, focusing on supporting organizations in meeting regulatory requirements through expert guidance and structured training. The scope includes preparing clients for audits, developing compliance documentation, and delivering customized instruction to personnel handling controlled goods to mitigate risk and maintain adherence to federal standards. Services must be aligned with the program’s stringent protocols for security, classification, handling, and storage of controlled items within the defence and security sectors. This subcontract, issued by the Department of National Defence on behalf of the Government of Canada, targets entities operating in Canada and requires expertise in navigating the complexities of the Controlled Goods Program. The solicitation is open for responses until August 27, 2026, with performance expected to take place across Canada. The NAICS code 541611 indicates the work falls under management consulting services, emphasizing strategic advisory rather than operational execution. Compliance readiness, including audit preparation and workforce training, is central to fulfilling the contract's objectives, ensuring all participants in the supply chain uphold the security and integrity required by national defence regulations.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 493190
New
International
Packaging, Marking, and Palletization ServicesThe contract requires full military-compliant packaging, palletizing, and labeling services for inert dummy cord shipments, ensuring strict adherence to NATO and United Nations marking standards. All materials must be properly secured on pallets and labeled with the required international symbols and bilingual documentation, including release forms in both English and French to meet Canadian government requirements. The work must be executed in full compliance with defense logistics protocols to support secure and standardized handling of military-grade inert components. The solicitation is issued by the Department of National Defence under the Government of Canada as a subcontract opportunity, classified under NAICS code 493190 for other material handling and warehousing services. Responses are due by August 27, 2026, with performance expected to take place within Canada. The contract emphasizes precision in documentation and marking to ensure global interoperability and regulatory compliance, with no flexibility in the application of military or international standards for packaging and labeling.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 541690
New
International
Safety and Suitability for Service (S3) DocumentationThe contract requires the development of Safety and Suitability for Service documentation in full alignment with the Canadian standard D-09-002-010/SG-000, focusing specifically on hazard analysis and service life validation to support military safety certification. This work is essential for ensuring that equipment or systems meet rigorous defense operational requirements and are deemed safe for use in military environments over their intended lifespan. All deliverables must comply with federal standards and be technically thorough, leaving no room for ambiguity in risk assessment or longevity claims. The contract is classified as a subcontract and is issued by the Department of National Defence under the Government of Canada, with performance required across Canada. It was posted on July 28, 2026, with a response deadline of August 27, 2026. The North American Industry Classification System code 541690 indicates this is for other scientific and technical consulting services, reflecting the specialized nature of the safety engineering and documentation services required. There is no set-aside designation, and while no point of contact is listed, the tender opportunity can be accessed through the Canada Buys portal for further details and submission requirements.
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
International
Technical Data Package (TDP) DevelopmentThe contract requires the development and submission of a complete Technical Data Package aligned with military standards, encompassing detailed design specifications, comprehensive materials lists, validated test procedures, and specific packaging details necessary for defense applications. This effort is being conducted as a subcontract under the Government of Canada's Department of National Defence, with performance required within Canada. The deliverables must meet rigorous defense requirements to ensure compatibility, reliability, and compliance with operational and logistical protocols. The solicitation was posted on July 28, 2026, with a firm response deadline of August 27, 2026, at 7:00 PM Eastern Time. The NAICS code 541330 identifies this as an engineering services contract, indicating a focus on technical design and documentation expertise. While no set-aside provisions or detailed point of contact information are specified, the opportunity is open to qualified subcontractors capable of delivering high-fidelity technical documentation that supports military systems and equipment. All submissions must adhere to the defined standards outlined by the contracting authority to ensure successful evaluation and acceptance.
Engineering Services

POSTED

2 days ago

DEADLINE

in 28 days
View Details