SOLDER, TIN ALLOY

SOLDER,TIN ALLOY
SOLDER,TIN ALLOY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 81348 FEDERAL SPECIFICATIONS
PN: SN60WRMAP3
TIN 59.5-61.5%
WIRE/ROSIN, MILDLY ACTIVATED
PLASTIC CORE, 3.3% FLUX (2.7%-3.9%)
UI = EA
QUP = 001
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
CDRL-COQC-19071 APPLIES
PACKAGING AND PACKING SHALL BE IAW ASTM-D3951-15. MARKINGS SHALL BE IAW
MIL-STD-129 (INCLUDING BARCODE AND MSL).
MARKINGS PARAGRAPH: WHEN ASTM D3951, COMMERCIAL PACKAGING IS SPECIFIED,
THE FOLLOWING APPLY:
#ALL SECTION #D# PACKAGING AND MARKING CLAUSES TAKE PRECEDENCE OVER ASTM
D3951.
#IN ADDITION TO REQUIREMENTS IN MIL-STD-129, WHEN COMMERCIAL PACKAGING
IS USED, THE METHOD OF PRESERVATION FOR ALL MIL-STD-129 MARKING AND
LABELING SHALL BE #CP# COMMERCIAL PACK.
#THE UNIT OF ISSUE (U/I) AND QUANTITY PER UNIT PACK (QUP) AS SPECIFIED
SPE8E6-27-T-0130
SECTION B
IN THE CONTRACT TAKE PRECEDENCE OVER QUP IN ASTM D3951.
ALL UNIT PACKAGES, INTERMEDIATE PACKS, EXTERIOR SHIPPING CONTAINERS,
AND, AS APPLICABLE, UNITIZED LOADS SHALL BE MARKED IN ACCORDANCE WITH
MIL-STD-129, INCLUDING BAR CODING AND A MSL LABEL. THE CONTRACTOR IS
RESPONSIBLE FOR APPLICATION OF SPECIAL MARKINGS AS DISCUSSED IN THE
MILITARY STANDARD REGARDLESS OF WHETHER SPECIFIED IN THE CONTRACT OR
NOT. SPECIAL MARKINGS INCLUDE, BUT ARE NOT LIMITED TO, SHELF-LIFE
MARKINGS, STRUCTURAL MARKINGS, AND TRANSPORTATION SPECIAL HANDLING
MARKINGS. THE MARKING OF PILFERABLE AND SENSITIVE MATERIEL WILL NOT
IDENTIFY THE NATURE OF THE MATERIEL. PASSIVE RFID TAGGING IS REQUIRED
IN ALL CONTRACTS THAT CONTAIN DFARS CLAUSE 252.211-7006. CONTRACTORS
MUST CHECK THE SOLICITATION AND/OR CONTRACT FOR THIS CLAUSE. FOR
DETAILS AND MOST RECENT INFORMATION, SEE
HTTP://WWW.ACQ.OSD.MIL/LOG/RFID/INDEX.HTM FOR THE CURRENT DOD SUPPLIERS#
PASSIVE RFID INFORMATION GUIDE AND SUPPLIER IMPLEMENTATION PLAN. IF THE
ITEM HAS UNIQUE ITEM IDENTIFIER (UII) MARKINGS THEN THE UII NEEDS TO BE
2D BAR CODED AND APPLIED ON THE UNIT PACKAGE, INTERMEDIATE AND EXTERIOR
CONTAINERS, AND THE UNIT LOAD.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
SPE8E6-27-T-0130
SECTION B
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP: //WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS /PACKAGING/PALLETIZATION.ASPX
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 3439-01-505-2772 Quantity: 6 EA Purchase Request: 7018588487QTY: 6 Delivery: 162 days ADO