Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

--Sole Source Negotiation - Repair/Upgrade DT2000 Dynamometer Acquisition System

Active
USA-SNOTE-040211-003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Directorate of Contracting at Fort Campbell plans to negotiate a sole source purchase order with Froude Consine Inc. for the repair and upgrade of the DT 2000 Dynamometer Acquisition Data System. This work involves supplying two GPS-2508W Data Acquisition Systems, including software and various accessories such as rpm and torque harnesses, a printer, mouse, and a 17-inch monitor. Additional items to be procured include transducers for oil and fuel pressure, thermocouples for temperature measurement, load control valve, amplifier with connecting harness, and provision for two days of commissioning and training. The contract also includes annual service and calibration to ensure the test cells and equipment operate according to specifications. The procurement falls under NAICS code 334519 and will be awarded on an unrestricted basis through Simplified Acquisition Procedures with a sole source approach, but it is not a request for competitive quotes. Firms that believe they can meet the requirements have 10 days from the publication date to submit detailed written notification to the Contracting Officer, who will evaluate responses at the government’s discretion. If no competitive responses are received, negotiations will proceed solely with the incumbent provider. Responses were due by February 19, 2003, with submissions accepted via email or fax, and inquiries directed only to designated contracting personnel by phone not accepted.

General Info

Sole source purchase order for DT 2000 system upgrade, includes hardware, training, and service.

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

KY

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Campbell
ContactsNo contacts available
OfficeFORT CAMPBELL, KY, 42223-5358, USA
Office AddressFORT CAMPBELL, KY, 42223-5358, USA
ContactsNo contact information available

Full Description

Show more
The Directorate of Contracting Fort Campbell intends to negotiate a sole source purchase order with Froude Consine Inc for repair/upgrade of DT 2000 Dynamometer Acquisition Data System. The repair/upgrade is to consist of the following: 2 GPS-2508W- 2 Data Acquisition System for DT 2000 which includes software, rpm harness, torque harness, printer, mouse, mouse pan and 17 inch monitor; 2 each 7306720 Transducer for oil pressure; 2 each Transducer for fuel pressure; 8 each Thermocouples for temperatu re measurement; Two days commissioning and training; 1 each number 831300A1 Load Control Value; 1 each Number 942556 Amplifier; 1 each Number 94255.30 Harness to connect amplifier to load control value; Annual Service and Calibration to check and cali brate test cells and verify that equipment is operating properly in the specifications. NAICS code for this procurement is 334519 and is to be awarded on an unrestricted basis. This sole source procurement is under the simplified Acquisition Procedures, and Other Than Full and Open Competition. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES, however; any firm that believes it can meet the requirements may give written notification to the Contracting Officer within 10 days from the date of the publication of this synopsis. Supporting evidence must be furnishe d in sufficient detail to demonstrate the ability to comply with the requirements listed. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solel y within the discretion for the Government. If no responses are received, the Government will proceed with the sole source negotiation with Avion Inc. Responses are due by 19 Feb 03, 2:00 p.m. (CST). Response shall be submitted via e-mail to the followi ng address: contact@example.gov or Faxed responses will be accepted at +1 (555) 000-0000. Telephone requests or inquires will no be accepted. The points of contact are Ms Gertrude Colbert, Contracting Officer, +1 (555) 000-0000, or Mr. Clarence Duzan, Contr act Specialist, +1 (555) 000-0000. !!

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QM Micc-Ft Campbell

Same awarding agency

NAICS: 236220
Federal
The Mission and Installation Contracting Command (MICC), Fort Campbell, KY, is issuing this Special Notice to identify small business concerns interested in receiving future request for quotations for various construction and related facility-support.
Solicitation # MICCFTCINNOVATION
The Mission and Installation Contracting Command at Fort Campbell, KY, is establishing a contractor repository to identify qualified small businesses for future construction and facility support requirements. This initiative aims to streamline the procurement process and increase opportunities for small businesses, including those with SDB, 8(a), HUBZone, SDVOSB, and WOSB designations. The primary focus is on NAICS Code 236220 for commercial and institutional building construction, covering services such as general repair, electrical, plumbing, HVAC, masonry, and demolition. Work will be performed at Fort Campbell and surrounding areas in Kentucky and Tennessee, with individual purchase orders expected to range from 2,000 to 9,000,000 dollars. Interested firms must maintain active SAM registration, possess a valid Unique Entity Identifier, and be able to meet specific insurance and bonding requirements. This notice is not a solicitation or a guarantee of work, but rather a method for the government to build a list of capable vendors to receive future requests for quotations via email.
Commercial and Institutional Building Construction

POSTED

about 1 month ago

DEADLINE

in 11 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS