Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Sole-Source Supply of Miniature Quad VHF/UHF/Microwave Transceivers

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement and delivery of seven proprietary miniature transceivers, specifically model HTLx2-U101100004, for integration into a disconnected network system. The contract is managed by the Department of Defense through Nswc Dahlgren, with the place of performance located in Dahlgren, Virginia. Due to exclusive intellectual property rights held by the prime contractor, these specific transceivers are unavailable from other sources, necessitating a sole-source procurement approach. The project falls under NAICS code 334419 and was posted on August 10, 2026.

General Info

Sole-source procurement of seven HTLx2-U101100004 transceivers for Nswc Dahlgren, Department of Defense.

Agency

Department Of Defense → Nswc DahlgrenView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

Dahlgren, VA, 22448, USA

Set-Aside

NONE

Documents

This scope was carved out of N0017826PC605.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HTL Transceivers

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 10

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Dahlgren

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nswc Dahlgren

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of seven proprietary miniature transceivers (model HTLx2-U101100004) for use in a disconnected network system. The item is not available from other sources due to exclusive intellectual property held by the prime contractor.

Similar Contracts

Same NAICS industry code

FILTER, BAND PASS

Solicitation # SPE7M5-26-T-412F

This contract is a solicitation issued by the Department of Defense Active Devices Division for the procurement of 18 band pass filters, identified by NSN 5915-01-414-8607. The requirement specifies several approved part numbers from K&L Microwave LLC, CAES Systems LLC, and BAE Systems Information and Electronic. This is designated as a critical application item with a delivery timeline of 161 days after order, targeting a need ship date of February 2, 2027, and an original required delivery date of August 22, 2027. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for labeling and ASTM D3951 for commercial packaging, unless hazardous material standards apply. Compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and Covered Defense Information regulations is required. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-16TM

This contract is for the procurement of three special purpose electrical cable assemblies, identified by NSN 6150-01-482-7434 and part number HM022-346 from Robertson Fuel Systems. The items are designated as critical application items and must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, within 120 days. The supplier must adhere to specific DLA technical and quality requirements, including documentation for source approval and strict packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Item Unique Identification is not required for this order.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

WIRING HARNESS, BRAN

Solicitation # SPE4A6-26-U-3070

The solicitation seeks quotes for 611 wiring harnesses, NSN 5995012145783, under a total small business set-aside, with a guaranteed minimum order of 61 units. The procurement is conducted as an RFQ through the SAM.gov platform, with electronic submission required and no hard copies available. The contract, if awarded, may become an indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, with an estimated 12 orders per year. All items are to be delivered to various DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. The approved source is identified as 73342 23017899, and no technical specifications, plans, or drawings are provided. The solicitation is issued by the Department of Defense, DLA Aviation office in Richmond, Virginia, with responses due by May 29, 2026, and all responsible small businesses are eligible to submit quotes. Questions must be directed via email to the designated point of contact, as outlined in the solicitation document.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

FILTER ELEMENT SET,

Solicitation # SPE7M5-26-T-411D

This contract, identified as SPE7M5-26-T-411D, is a solicitation by the Department of Defense for the procurement of two filter element sets. The items are identified by NSN 5999017276784 and part number SYS-04 from Omega Engineering, Inc. The delivery is set for FOB Origin with a required delivery date of November 10, 2026, and a need ship date of February 2, 2027. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging, palletization, and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance will occur at the destination, with the final shipment directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

SHOP EQUIPMENT, AUTO

Solicitation # SPE7L3-26-T-122J

This contract pertains to the procurement of a single unit of shop equipment for automotive use, identified by NSN 4910-15-021-4426 and part number 506010039, supplied by IVECO OTO MELARA SCRL and IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all items must be marked and labeled in accordance with MIL-STD-130N for military property identification. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless otherwise authorized in specifications. The equipment is to be delivered FOB origin within 181 days from the contract date, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 25, 2027. Transportation logistics are governed by specific DLA procedural notes, and the unit of issue is one each. The contract was issued under solicitation SPE7L3-26-T-122J, with a response deadline of July 27, 2026, and is administered by the Department of Defense’s Land Supplier Operations Vehicle Support office. All associated data, including unit of issue conversions, must align with official DLA guidelines provided through their designated resources.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-12SF

Solicitation SPE4A6-26-T-12SF is a total small business set-aside issued by the ASC Commodities Division of the Department of Defense for the procurement of 8,881 feet of special purpose electrical cable assemblies, identified by NSN 5995015922049 and Amphenol part number NF24Q100. The contract allows for a quantity variance of plus or minus 10 percent and specifies a delivery period of 170 days ADO, with a primary delivery location at Tinker AFB, Oklahoma. Terms are established as FOB Origin, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging requirements under MIL-STD-2073-1E and DLA requirement RP001. Marking and labeling must comply with MIL-STD-129, with additional requirements for bare item marking on critical application items and hazard communication standards per 29 CFR 1910.1200. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with CMMC Level 2 self-assessment and safeguarding of covered defense information. Proposals must be submitted electronically via the DIBBS portal by August 13, 2026.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE7L4-26-U-1098

This contract is a solicitation for the procurement of six special purpose electrical cable assemblies, identified by NSN 6150015753861 and Daimler Truck North America part number A06-69178-118. The order is issued by the Department of Defense through the LSO Combat Vehicles and Armament agency with a delivery requirement of 81 days after the order is placed. Shipping is set as FOB Origin, while both inspection and acceptance will occur at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically citing MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the delivery.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A0-26-T-4286

This solicitation from the Department of Defense Aviation Supply Chain is for the procurement of seven special purpose electrical cable assemblies under NSN 6150-01-206-5196. The contract is a total small business set-aside with a strict delivery requirement of five days after receipt of order. Compliance requirements are extensive, including mandatory ISO 9001:2015 quality standards and CMMC Level 2 certification via a C3PAO. The project involves strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DOD export-controlled technical data training. Additional mandates include specific DLA packaging requirements, source approval request documentation, and origin inspection and acceptance.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-16LX

This contract is for the procurement of eight cable assemblies, identified by NSN 5995-01-547-5853 and associated with Northrop Grumman Systems Corporation part numbers 4801738 and 4802390. The order is issued by the Department of Defense ASC Commodities Division with a required delivery date of July 7, 2027, and a need ship date of February 7, 2027. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Notably, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, and specifies that item unique identification is not required by the service customer.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE7LX-26-U-9569

This contract is a solicitation for the procurement of four special purpose electrical cable assemblies, identified by NSN 6150-01-412-6546 and part number A06-20074-000 from Daimler Truck North America LLC. The requirement is designated as a critical application item and is set aside for total small business under NAICS code 334419. Delivery is required within 53 days from the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging, bare item marking, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

ACCESSORY KIT, ELECT

Solicitation # SPE7M5-26-T-362M

The contract is for one unit of an electronic accessory kit identified by NSN 5999-01-599-9430 and part number 069085-0001, issued by the Department of Defense’s Defense Logistics Agency under solicitation SPE7M5-26-T-362M. Delivery is required within 197 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged per DLA’s stringent packaging standards, requiring adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless designated hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply, and all DLA Master List technical and quality requirements take precedence. The kit must not contain any Class I ozone-depleting substances unless written approval from the contracting officer is obtained, and the prohibition applies universally except for commercial items as defined in FAR 11.001 or part-numbered-only items. Cybersecurity compliance is mandated through a CMMC Level 2 self-assessment, and all government identification must be removed from non-accepted supplies. The item is classified as a critical application, and palletization must conform to DLA packaging requirements. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 24, 2027, and the unit of issue is each (EA) with no variance allowed in quantity.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

LIGHT, INDICATOR

Solicitation # SPE4A6-26-T-13YN

Contract SPE4A6-26-T-13YN is a solicitation issued by the ASC Commodities Division of the Department of Defense for the procurement of four indicator lights, identified by NSN 6210014810974. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of August 5, 2026, and a delivery timeline of 74 days. The contract is governed by the DLA Master List of Technical and Quality Requirements (RA001) and requires strict adherence to quality sampling plans under MIL-STD-1916 or ASQ H1331, with specific acceptance quality limits for critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including a fragile marking code and the use of moisture barrier outer protective items. A critical safety requirement is the prohibition of mercury or mercury compounds in the preservation, packaging, and marking of the supplies. Administrative requirements include electronic invoicing via WAWF and the submission of hazardous material safety data sheets where applicable. Offerors must provide representations and certifications regarding their socioeconomic status and the use of covered defense telecommunications equipment through the DIBBS portal.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → Nswc Dahlgren

Same awarding agency

Keysight Signal Generator

Solicitation # N0017826Q6854

The Naval Surface Warfare Center Dahlgren Division is seeking quotations for a Keysight Signal Generator and associated add-ons under solicitation N0017826Q6854. This procurement is a brand-name requirement for equipment manufactured by Keysight Technologies, Inc., intended to replace a failed module in an existing system. The contract will be awarded on a firm fixed-price basis to the lowest price technically acceptable offeror. Eligible bidders must be registered in the System for Award Management and provide documentation from the original equipment manufacturer proving they are an authorized reseller or distributor. All quotes must include shipping and freight to Dahlgren, Virginia, and any applicable tariffs. The deadline for proposal submission is August 18, 2026, at 12:00 p.m. EST, with an anticipated award date by September 30, 2026.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 23 hours ago

DEADLINE

High Power Microwave Engineering Services

Solicitation # N0017826R3004

The Naval Surface Warfare Center, Dahlgren Division is seeking industry awareness for a follow-on requirement regarding High Power Microwave Engineering Services. The scope of work involves research, design, technology assessment, prototyping, integration, modeling and simulation, systems engineering, and the development of embedded controls for HPM weapon systems. This current action is a sources sought and industry day notice rather than a formal request for proposals, and it does not obligate the government to award a contract. This opportunity is restricted to SEAPORT MAC holders. The Navy is transitioning its solicitation and proposal process to the Procurement Integrated Enterprise Environment PIEE Solicitation Portal, and all interested parties must have registered PIEE accounts to participate. While a draft RFP has been posted for industry response, official proposals are expected to be requested in the fourth quarter of fiscal year 2026 through a new PIEE Solicitation Module posting.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Draft RFP_N0017826R3107_HPM Support Services

Solicitation # DRAFT_RFP_N0017826R3107_HPM_SUPPORT_SERVICES

This pre-solicitation notice is for a draft Request for Proposals regarding HPM Support Services for the Naval Surface Warfare Center Dahlgren Division. The objective is to provide support for the E Department and other relevant departments within the organization. This is a full-and-open competition, though eligibility for the eventual award is strictly limited to SEAPORT-NXG MAC holders. The government is currently seeking industry feedback and comments on the draft requirements to identify any barriers to competition. This phase is for planning purposes only and is not a request for formal proposals or capability statements. Interested parties must submit their comments by August 27, 2026, referencing HPM Support Services Re-Compete in the subject line.

Engineering Services

POSTED

DEADLINE

in about 2 months

Official RFP - NSWCDD Range Support Services

Solicitation # N0017826R3104

The U.S. Navy’s Naval Surface Warfare Center Dahlgren Division is issuing a solicitation for Range Support Services under contract number N0017826R3104, exclusively open to holders of the SeaPort-NxG Multiple Award Contract. This requirement is designated as a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA can compete and be awarded. The solicitation, classified under NAICS code 541330, demands strict adherence to the submitted RFP guidelines, which override any prior draft documents, and proposals must be submitted exclusively through the PIEE platform using the Solicitation Module. All responses are due by August 10, 2026, at 4:00 p.m. Eastern Time, following the detailed instructions outlined in the official notice. Performance of the required services will take place at NSWCDD’s location in Dahlgren, Virginia, with the primary point of contact being Carly Ann Hanson, reachable via phone or email, and Alana Clifford serving as the secondary contact. The solicitation was posted on July 2, 2026, and interested parties can access further details through the SAM.gov workspace link provided. The contracting office operates under the Department of Defense and is focused on securing capable small business vendors to provide essential support services for naval range operations, with no exceptions made for non-SeaPort-NxG contractors or non-small businesses under this set-aside.

Engineering Services

POSTED

DEADLINE

Solicitation # N0017826Q6835

Solicitation N0017826Q6835 is a request for quotations issued by the Naval Surface Warfare Center Dahlgren Division for the procurement of AED covers. The requirement is being pursued on a sole source basis for Zippertubing Company, located in Chandler, Arizona. This is a firm fixed-price contract for commercial items under FAR Part 12, and it is not eligible for small business set-aside. All materials must be TAA compliant, and the award will be made based on the Lowest Price Technically Acceptable criteria. Quotations must be submitted by 12:00 p.m. EST on August 18, 2026, with an anticipated award date of August 30, 2026. All costs, including shipping, freight, and tariffs to Dahlgren, Virginia, must be included in the quoted price. To be eligible for award, firms must be registered in the System for Award Management and authorized resellers must provide a Letter of Authorization from the Original Equipment Manufacturer.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # N0017826Q6850

The Naval Surface Warfare Center Dahlgren Division (NSWCDD) is soliciting a firm-fixed-price contract, N0017826Q6850, for custom onsite DIOM and Outward Leadership (OL) training services. This is a sole-source procurement under FAR 6.103-1(b) awarded to The Arbinger Company, as they are the original developer and only source capable of providing this specialized training. The scope of work includes one-day and half-day onsite facilitation by Master, Senior, and Associate facilitators, virtual facilitation, training development and design, and the provision of participant materials. The contract is structured with a base year and two option years, with a total performance period of 12 months from the date of award. The award will be made on a Lowest Price Technically Acceptable (LPTA) basis. All quotations must be submitted by August 21, 2026, by 5:00 p.m. EST to Lee Ann Mizelle. Eligible offerors must be registered in the System for Award Management (SAM) and provide a Letter of Authorization from the Original Equipment Manufacturer. All services will be performed at the NSWC Dahlgren facility in Virginia, and invoicing must be processed through the Wide Area Workflow (WAWF) system. The procurement is conducted in accordance with FAR Part 12 for commercial items, with an anticipated award date of September 10, 2026.

Professional and Management Development Training

POSTED

DEADLINE

Solicitation # N0017826Q6795

The U.S. Navy’s Naval Surface Warfare Center Dahlgren Division is seeking hardware maintenance support for video teleconference infrastructure under solicitation N0017826Q6795, issued as a combined synopsis/solicitation using simplified procedures under FAR Part 12. The requirement is for maintenance services related to VTC equipment from specified manufacturers including Dalite, NEC, Crestron, Cisco, Biamp, and others, with services encompassing Help Desk, Tier 1-2 support, workspace, print, and productivity tools. The contract will be awarded on a Lowest Price Technically Acceptable basis as a firm fixed-price order under sole source authority, with no set-aside provisions, and is open only to authorized resellers who must provide documentation from the original equipment manufacturer confirming their authorization. All quoted prices must include shipping, freight, tariffs, and duties to Virginia Beach, VA 23461, with no post-award cost adjustments permitted, and DFARS 252.225-7013 may apply for duty-free entry where applicable. Quotations are due by 5:00 p.m. EST on July 17, 2026, and must be submitted by firms currently registered in the System for Award Management, with compliance to all FAR and DFARS provisions incorporated by reference, including Buy American or Trade Agreements Act requirements depending on contract value. Offerors are encouraged to provide pricing data to support the government’s fair and reasonable price determination, and failure to submit OEM authorization letters will disqualify submissions. Responses must strictly adhere to the solicitation terms, and exceptions will result in rejection. The point of contact for questions is Taylor Embrey, reachable via email at taylor.r.embrey.civ@navy.mil or by phone at 540-938-9990, with all correspondence required to reference the solicitation number. An anticipated award is expected by July 2026, following evaluation of compliant quotes.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 10 hours

Warranty and Logistics Support Services

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

IUID Marking and Data Matrix Labeling Services

Sign Manufacturing

POSTED

DEADLINE

256GB RAM Module Supply

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

7975WX Processor Supply

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

RTX 5090 GPU Supply

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE