Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SOLE SOURCE – Thermistor Connectors

Active
N0016426Q0266Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting Thermistor Connectors through a sole-source contract action under FAR 13.106-1, limiting participation to Teledyne Instruments, Inc., as the only qualified source capable of meeting the technical requirements necessary for timely and accurate testing. The decision to proceed without competition is based on Teledyne’s exclusive qualification and existing capability to produce these critical components. While other responsible sources may submit capability statements, the Government retains full discretion to determine whether a competitive procurement is warranted, and such submissions will be evaluated solely for that purpose. Participation requires mandatory registration in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access controlled technical attachments. The solicitation follows FAR Part 13 procedures and is exempt from full synopsis requirements under FAR 5.202(a)(13), with the official solicitation number N00164-26-Q-0266. Interested vendors must monitor sam.gov for any pre-closing amendments, and only those who submit quotes by the deadline will receive post-deadline revisions. Offers must be electronically submitted to Sandra Gunderman at sandra.e.gunderman.civ@us.navy.mil no later than August 3, 2026, at 1:00 PM Eastern Time. The contract is not set aside for small businesses or other categories, and performance will occur at Crane, Indiana.

General Info

Sole-source contract to Teledyne Instruments for thermistor connectors, no competition, SAM and JCP registration required, quote due August 3, 2026.

Agency

Department Of Defense → Nswc CraneView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

Crane, IN, 47522, USA

Set-Aside

NONE

Documents

(1)

Solicitation+-+N0016426Q0266.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseCombined Synopsis
Posted

Combined Synopsis

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Organization / Agency
Department Of Defense → Nswc Crane
View Agency Profile
Office AddressCRANE, IN, 47522-5001, USA
Contacts
Sandra Gunderman
contact@example.gov

Full Description

Show more

Naval Surface Warfare Center (NSWC) Crane has a requirement for Thermistor Connectors.


The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, Teledyne Instruments, INC, 162 Corporate Dr Portsmouth, New Hampshire, 03801-6815, United States under the authority of FAR 13.106-1. This is being sole sourced because only Teledyne has met this requirement and are currently qualified to build the connectors. These elements are all necessary and critical to enable both timely and accurate testing. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. The information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.


Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov.  


Contractors must be properly registered in Joint Certification Program (JCP) in order to receive the controlled attachments. Information about the JCP is located at https://www.dla.mil/logistics-operations/services/joint-certification-program/.


This solicitation is being issued pursuant to the procedures at FAR Part 13.  Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-26-Q-0266 is hereby issued as an attachment hereto.   


All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/.  It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation.   


For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. 


Offers shall be e-mailed to sandra.e.gunderman.civ@us.navy.mil. All required information must be received on or before 03 AUG 2026 1:00 PM EASTERN TIME.  

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
SLEEVE, LOCKING, ELEC
Solicitation # SPE7M5-26-Q-0819
The contract pertains to the procurement of six locking sleeves for electrical connectors, identified by the NSN 5935-01-666-8618, under solicitation number SPE7M5-26-Q-0819. The supply is priced on a firm fixed price basis with no tolerance for quantity variance, and delivery is required within 125 days after award. Inspection and acceptance occur at the destination, with the point of origin as the FOB location. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards; non-hazardous materials must be packaged in accordance with ASTM D3951, while hazardous materials require adherence to TQ requirement IP025 as defined by FED-STD-313. All packaging and labeling must follow MIL-STD-129 specifications, and palletization must meet DLA Packaging Requirements for Procurement (RP001). The item is to be delivered to a U.S. military address in Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLAD Procurement Notes C19 and C20. The shipment is identified with RDD 777 and tied to project 9AL TP 2. The unit of issue is each, and the contract mandates compliance with all applicable DLA standards, including correct marking, labelling, and documentation. The point of contact for the acquisition is Karen Collins of the Department of Defense’s Active Devices Division, with a response deadline of August 15, 2026, and a posted date of July 31, 2026. The material need date is July 23, 2026, and the NSN is linked to a specific purchase request with internal government tracking identifiers.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0808
The contract specifies the procurement of two electrical receptacle connectors under NSN 5935-01-494-0348, with a firm fixed price and zero variance in quantity. The item must comply with military specification MIL-DTL-38999N Revision N dated 09/14/2023 and MIL-DTL-38999/24J Revision J dated 08/11/2022, and is subject to qualification requirements under the Qualified Products List for Federal Stock Class 5935. The use of Class I ozone-depleting substances in any phase of manufacturing or testing is strictly prohibited unless approved in writing by the contracting officer, though this restriction does not apply to commercial items as defined in FAR 11.001. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated government facility at Picatinny Arsenal, New Jersey, with delivery due 125 days after contract award. Inspection and acceptance occur at destination, and the contractor is required to comply with configuration change management procedures and any engineering change proposals. The procurement is part of a federal solicitation issued by the Department of Defense, with a response deadline of August 8, 2026, and a required delivery date of June 23, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7L4-26-T-5718
The contract solicitation SPE7L4-26-T-5718 seeks 13 units of the electrical plug connector identified by NSN 5935-01-196-4792, with a required delivery within 20 days after award to the Surface Force Logistic Center in Baltimore, Maryland. The solicitation, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, mandates compliance with DLA’s packaging and marking requirements including RP001 for palletization, MIL-STD-129 for item labeling and barcoding, and FED-STD-313 for hazardous materials packaging as defined by the DLA Master List of Technical and Quality Requirements. All items must be physically marked per RQ017 and labeled according to 29 CFR 1910.1200 for hazardous substances. The contract specifies FOB DESTINATION terms, placing all delivery costs and risks on the contractor until goods reach the designated location. Invoicing must be submitted exclusively via the Wide Area WorkFlow system, with manual submissions prohibited, and contractors must register on WAWF to receive payment. Technical and quality compliance is governed by referenced standards and regulatory clauses including ASTM D3951 for non-hazardous item packaging, and the full DFARS and FAR framework applies, including clauses on cyber security (252.204-7012), trafficking in persons, employment eligibility, sustainable products, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The contract type is not explicitly stated but includes FAR 52.216-1 Alternate I, indicating potential for cost-reimbursement or incentive structures. Offerors must provide a complete data package including information on approved and alternate parts, affirm their small business or socioeconomic status if applicable, and disclose any use of covered defense telecommunications equipment with corresponding UEI and CAGE codes. The solicitation closes on August 5, 2026, and proposals must be submitted electronically through DIBBS. Although pricing data is omitted, historical references suggest a prior unit cost of approximately $1,892.75, but no current pricing or estimated contract value is provided. Inspection and acceptance will occur at the destination by the Government, with standards overseen by the DLA Master List and applicable federal regulations.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0814
The contract specifies the procurement of 50 electrical plug connectors with NSN 5935-00-823-0367 under solicitation SPE7M5-26-Q-0814, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is qualified and must conform to the Qualified Products List for Federal Stock Class 5935, with configuration changes subject to Engineering Change Proposal and variance request processes. The connector must comply with SAE AS50151 Revision E dated June 1, 2020, and is designated as a critical application item, necessitating full conformance to performance and safety criteria. The use of ozone-depleting substances is strictly prohibited without written approval from the Contracting Officer, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional uses in batteries, lighting, sensors, or weapon systems, with additional containment requirements for portable devices. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and procedures outlined, and no special marking is required. Sampling and inspection methods must align with MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise specified, and unspecified attributes are treated as major. Delivery is FOB origin with a firm fixed price and zero variance tolerance, and the item must be delivered within 90 days after award to the designated DLA distribution center in Tracy, California. The contract prohibits substitution of approved sources without documented manufacturer authorization and pre-award approval, and all materials must comply with hazardous materials shipping guidelines per DLAD Procurement Notes. Pricing is fixed, and the item is intended for federal government use with a required ship date of December 23, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL C
Solicitation # SPE7M5-26-Q-0816
The contract specifies the procurement of 197 units of a backsheel for an electrical connector with NSN 5935-01-225-5386, classified as a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. The item must conform to SAE AS85049F Revision F dated April 1, 2021, and the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited unless explicit written approval is obtained from the Contracting Officer, and this prohibition applies regardless of referenced military or federal specifications. The item is designated as a critical application item and must be packaged in accordance with DLA Packaging Requirements, marking and labeling in compliance with MIL-STD-129, and palletization as specified under RP001. If deemed hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA requirements take precedence. The contract is firm fixed price with zero variance in quantity, and delivery is due within 100 days after date of award, with inspection and acceptance occurring at destination. The item is to be shipped to DLA Distribution Jacksonville, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-Q-0816, with a response deadline of August 15, 2026, and the material is needed by January 26, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, PLUG
Solicitation # SPE7M5-26-U-0051
The contract is for the procurement of a CONNECTOR BODY, PLUG with NSN 5935014449281 under an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency’s Active Devices Division. The solicitation, numbered SPE7M5-26-U-0051, was posted on July 16, 2026, with a response deadline of July 31, 2026, and is set aside exclusively for Women-Owned Small Businesses under NAICS code 334417. The estimated quantity is five units at a unit price of $5.00, with no guaranteed minimum order but a contract ceiling of $350,000.00, and delivery is required within 104 days of award, FOB Origin. Inspection and acceptance occur at the destination, with compliance standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, and all packaging must adhere to DLA’s RP001 requirements. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional uses such as batteries, sensors, or medical instruments, and portable devices containing mercury must have a secondary containment barrier compliant with NAVSEA 5100-003D. All contractors must comply with a comprehensive set of Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering employment equity, human trafficking prevention, employment eligibility verification, sustainable products, hazardous materials handling, export controls, electronic invoicing via WAWF, cybersecurity safeguards including NIST SP 800-171, and prohibitions on hexavalent chromium and certain Chinese military companies. Offerors must provide their Unique Entity Identifier and CAGE code, certify their small business status, and disclose any participation in joint ventures or provision of covered telecommunications equipment as required by 252.204-7016 and 252.204-7017. Special requirements include hazard communication labeling per OSHA standards, restrictions on foreign-flagged vessels for ocean transport, and mandatory notification of potential safety issues. Proposals must be submitted electronically through the DLA-BSM Internet Bid Board System by the stated deadline, with no physical submissions permitted, and failure to meet any technical, packaging, or regulatory requirement will result in rejection. Long-term contract performance requires recertification
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0815
The contract specifies the procurement of an electrical receptacle connector with NSN 5935-01-412-1961 and part number MS17346R36N52P, meeting technical requirements defined by MIL-DTL-22992H(4) Supplement 1 and referenced specification MS17346F. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935, and manufacturing by Amphenol, Matrix, or Pyle National with lot date codes between July 2006 and June 2016 is strictly prohibited. Traceability documentation may be required to verify manufacturing origin and dates. The product must be free of intentional mercury or mercury-containing compounds except in specified exempted applications such as certain batteries, instruments, or weapon systems, and any portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances in any phase of manufacturing or processing is prohibited without written contracting officer approval. The connector is designated a critical application item, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Palletization follows DLA packaging requirements, with no special marking required. Delivery is due in two shipments of 13 and 11 units respectively, 167 days after award, with firm fixed pricing, zero quantity variance, and destination-based inspection and acceptance. FOB is origin, and all shipments are directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M5-26-Q-0815, with responses due by August 15, 2026, and deliveries scheduled for April and November 2026.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CO
Solicitation # SPE7M5-26-T-337E
The contract under SPE7M5-26-T-337E involves the procurement of shell, electrical components identified by NSN 5935011318012, with a total quantity of 196 TE units, where each TE unit consists of 10 individual items packaged together. Delivery is required within 38 days after the date of order, with a firm delivery target of September 8, 2026, and shipment must be made FOB origin, meaning the contractor bears all costs and responsibilities up to the point of shipment from their facility. The government will inspect and accept the items at the destination, specifically at DLA Distribution Warner Robins, Building 376, Robins AFB, GA. Packaging must strictly conform to MIL-STD-2073-1E, including preservation methods that require items to be clean and dry without additional preservation, wrapping, or cushioning materials; marking must adhere to MIL-STD-129 with no special marking codes applied. The unit of issue is TE, and the contract specifies that the Government’s authorized unit of issue must be used, with a corresponding ANSI X12 unit of issue to be referenced for system alignment. The contract imposes stringent material restrictions, notably prohibiting the intentional inclusion of mercury or mercury-containing compounds in supplied hardware or materials, with limited exceptions for functional uses in batteries, fluorescent lamps, necessary instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Multiple FAR and DFARS clauses govern compliance, including requirements for hazardous materials handling, cyber incident reporting under 252.204-7012, safeguarding covered defense information, prohibition of hexavalent chromium, trafficking in persons, employment eligibility verification, and electronic invoicing exclusively through WAWF. Contractors must maintain active SAM registration, provide a UEI and CAGE code, and may be required to affirm socioeconomic status such as small business, SDVOSB, or HUBZone. The contract is fixed-price, with no price variance allowed and no options identified; while pricing details are listed, the unit price field is inconsistent with expected values and no extended total is provided, rendering the exact contract value indeterminate. Technical and quality requirements are incorporated by reference from the DLA Master List, accessible via
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0811
This contract specifies the procurement of two electrical connector receptacles with NSN 5935-01-494-0348, governed by strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The item is a qualified product and must comply with the Qualified Products List requirements under procurement note H01 for Federal Stock Class 5935 connector assemblies and contacts. Manufacturing must adhere to MIL-DTL-38999N Revision N dated 09/14/2023 and MIL-DTL-38999/24J Revision J dated 08/11/2022, and the use of any Class I ozone-depleting substances in production, cleaning, or testing is strictly prohibited unless written approval from the contracting officer is secured. Configuration changes require formal engineering change proposals and variance requests, and the item must be marked in accordance with MIL-STD-129 with no special marking codes. Packaging must meet DLA Packaging Requirements and MIL-STD-2073-1E standards, using specified materials and methods including dry preservation and D3 unit containers, with palletization following RP001 guidelines. The contract mandates a firm fixed price with zero variance in quantity, and delivery is required within 125 days after the award date at the destination point with FOB origin terms. Shipments must be sent via the fastest traceable means, explicitly excluding parcel post, and directed to the specified Picatinny Arsenal addresses. The item is associated with purchase request 7017274824 and has a requested delivery date of June 23, 2026. The solicitation number is SPE7M5-26-Q-0811, with a response deadline of August 15, 2026, and the contract is issued under NAICS code 334417 by the Department of Defense’s Active Devices Division. All compliance, documentation, and logistical requirements must be fully satisfied to meet government acceptance criteria.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0810
This contract specifies the procurement of five electrical plug connectors identified by NSN 5935-00-201-8366 and part number MS3456W18-3S, governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as qualified and must comply with the Qualified Products List (QPL) standards for Federal Stock Class 5935 connector assemblies and contacts. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except under specific exemptions for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The connectors must be marked in accordance with MIL-STD-129 and packaged per MIL-STD-2073-1E, including designated packaging methods, materials, and unit containers, with palletization meeting DLA packaging requirements. The contract enforces a firm fixed price with zero variance in quantity, delivery must occur within 125 days after award, and the item is to be delivered to the destination specified at USNS JOHN LEWIS T-AO 205 in San Diego, California. All shipments are subject to DLA procedures for transportation and freight, and the contract is issued under solicitation SPE7M5-26-Q-0810 with a response deadline of August 15, 2026, and a required ship date of January 16, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
Federal
Brand Name Mandatory KOEHLKE Fiber Optics
Solicitation # SPMYM326Q2031
The Portsmouth Naval Shipyard is seeking brand name mandatory Koehlke Fiber Optics under a small business set-aside contract, exclusively open to small businesses. The solicitation, identified by number SPMYM326Q2031, was posted on July 31, 2026, with responses due by August 12, 2026. This combined synopsis and request for quotation falls under NAICS code 334417, which pertains to optical fiber and cable manufacturing. The contract is managed by DLA Maritime - Portsmouth, operating under the Department of Defense, with the primary office located in Portsmouth, New Hampshire, and performance required in Kittery, Maine. The point of contact for inquiries is Thomas Apple, reachable via email at Thomas.AppleJr@dla.mil or thomas.w.apple2.civ@us.navy.mil. All specific technical and procedural details are outlined in the attached Combined Synopsis Solicitation and RFQ documents, which must be reviewed by prospective bidders to ensure full compliance with mandatory brand requirements and submission guidelines.
DLA Maritime - Portsmouth

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
Federal
Electrical Hull Fitting (EHF) Repairs
Solicitation # N66604-26-Q-0239
The solicitation N66604-26-Q-0239 seeks Electrical Hull Fitting (EHF) repairs for Navy vessels under a Firm Fixed Price contract, with a response deadline of 7 August 2026. The work involves supplying critical shipboard components designated as Special Emphasis Level I, requiring stringent quality controls, 100% traceability, and compliance with MIL-I-45208 and ISO 9001:2015 standards. Deliverables include certified materials with legible markings per MIL-STD-792, certificates of compliance, torque records, material certifications, and electronic as-built drawings. Inspection occurs at the contractor’s facility prior to shipment, with final acceptance at the destination—NUWC Division Newport, Rhode Island—after installation and testing. All supplies must be packaged and marked in accordance with ASTM D-3951-18 and MIL-STD-129R, including 2D Data Matrix barcoding per MIL-STD-130 Rev N CH-1, and master packing lists for multi-container shipments. Pricing is submitted as a Firm Fixed Price with no estimated value provided; award will be made on a Lowest Price Technically Acceptable basis, where technical acceptability is determined by compliance with specifications, ISO registration, proof of First Article Testing, and favorable past performance in SPRS and PDREP. Cybersecurity requirements include CMMC Level 2 certification for systems handling Controlled Unclassified Information, adherence to NIST SP 800-171, and flow-down of security obligations to subcontractors. Operational Security programs, electronic spillage cost responsibility, and strict reporting protocols for CUI are mandatory. Offerors must maintain a valid Unique Entity ID and CAGE code, disclose socioeconomic status, and comply with representations regarding foreign entities, defense telecommunications, and security prohibitions. Invoicing must be processed exclusively through Wide Area WorkFlow, and all deliveries are F.O.B. Destination to Newport, RI. The contract includes base and option line items for EHF repairs and data delivery, with no contract value specified pending offeror pricing submission.
Nuwc Division Newport

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 333517
New
Federal
BED MILL PACKAGE
Solicitation # N0016426Q0283
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking a sole source procurement for one TRAK DPMRX5 Bed Mill with ProtoTRAK RMX CNC Package under NAICS code 333517, issued as a firm fixed price commercial acquisition authorized under FAR 12. The contract is exclusively awarded to CHARLES JONES MACHINERY INC due to unique technical, physical, and operational requirements that only this vendor can fulfill without risking mission delays or excessive costs. The solicitation is open for quotations from 31 July 2026 through 10 August 2026 at 3:00 PM Eastern Time, with responses required to be emailed to danielle.n.richardson12.civ@us.navy.mil. All offerors must be currently registered in SAM, and while other firms may submit capability statements, the government retains full discretion to proceed without competition. Amendments to the solicitation will be posted on SAM.gov, and it is the vendor’s responsibility to monitor for updates. The point of contact for this procurement is Danielle Richardson, and performance will occur at Crane, Indiana.
Machine Tool Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
Federal
OPTICAL LAB EQUIPMENT
Solicitation # N0016426Q0282
The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting a sole source procurement for optical lab equipment, specifically PLX periscope and retroreflector systems, under solicitation number N0016426Q0282. The acquisition is designated as firm fixed price and commercial, with only PLX Inc. identified as the sole responsible source due to its proprietary rights and exclusive ownership of the required technology, which it refuses to transfer to the government. This procurement is authorized under FAR 12.102, and while other vendors may submit capability statements, the government retains full discretion to proceed without competition. The requirement falls under NAICS code 333310 and is not subject to any small business set-aside. All offerors must be currently registered in the System for Award Management (SAM) to be considered. Responses are due by 3:00 PM Eastern Time on August 10, 2026, and must be submitted electronically to Danielle Richardson at danielle.n.richardson12.civ@us.navy.mil. The solicitation was posted on July 31, 2026, and no synopsis is being published due to the sole source justification under FAR 5.202(a)(13). Interested parties are responsible for monitoring sam.gov for any amendments issued prior to the deadline; only those who submit quotes will receive updates if changes occur after the closing date. The place of performance is Crane, Indiana, and the procurement is managed by the Department of Defense.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
Federal
HYDROPHONE BAFFLE RINGS
Solicitation # N0016426Q0256
The U.S. Navy, through the Naval Surface Warfare Center Crane, is seeking Hydrophone Baffle Rings under a sole source procurement with limited competition authorized under FAR 13.106-1, targeting three previously approved vendors: Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine. The solicitation, numbered N00164-26-Q-0256, was issued on July 31, 2026, with responses due by 2:00 PM Eastern Time on August 6, 2026, and is classified under NAICS code 334511 for semiconductor and other electronic component manufacturing. Offerors must be registered in the System for Award Management and the Joint Certification Program to access controlled documents, and all submissions must be emailed directly to Jaclyn Bailey at the designated Navy email address. While the Government retains full discretion to proceed without open competition, any responsible source may submit a capability statement, though such submissions are evaluated solely for the purpose of determining whether to initiate a competitive process. The requirement is not subject to any small business set-aside, and all updates or amendments will be published only on Contract Opportunities at sam.gov, making it the sole authoritative source for changes prior to the deadline. Any modifications issued after the closing date will be communicated exclusively to those who submitted offers.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 513210
New
Federal
Software Licenses New/Renewals
Solicitation # N0016426Q0281
The contract solicitation N0016426Q0281 seeks software license renewals and new purchases from Ansys Incorporated under a sole-source arrangement, with the Government retaining full discretion on whether to conduct a competitive procurement despite allowing other responsible sources to submit capability statements. The procurement is associated with NAICS code 513210 and falls under the Department of Defense, specifically the Naval Surface Warfare Center Crane in Indiana, with the performance location also in Crane, Indiana. Offers must be submitted via email to Joshua Tester at joshua.e.tester.civ@us.navy.mil no later than August 8, 2026, at 12:00 AM Eastern Daylight Time. All vendors must be actively registered in the System for Award Management and comply with all registration and confirmation requirements. While the solicitation is issued under FAR Part 13 procedures with a synopsis exception, interested parties are responsible for monitoring sam.gov for any amendments prior to the deadline. Post-deadline changes will only be communicated to those who have submitted quotes and may influence future discussions or award decisions.
Software Publishers

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325211
New
Federal
Noryl Rods
Solicitation # N0016426Q0268
NSWC Crane is seeking quotes for 20 NORYL RODs, each 5 inches in diameter and black with 30% glass fill, to be cut into 4-foot sections totaling 80 feet. The contract will be awarded as a firm fixed price under Simplified Acquisition Procedures, with all quotes required to include shipping FOB to Crane, Indiana 47522, along with the delivery schedule. Payment will be made electronically via PIEE/WAWF within 30 days of invoice submission. Bidders must be currently registered in the System for Award Management and comply with all solicitation requirements, as non-compliant offers will be rejected without further review. This solicitation is a Small Business Set Aside under NAICS code 325211 and is issued under a synopsis exception. All amendments or updates prior to the closing date will be posted on SAM.gov, and it is the vendor’s responsibility to monitor for changes. Offers must be submitted via email to dustin.l.spicer.civ@us.navy.mil no later than 4:00 PM Eastern Time on August 14, 2026. Post-deadline amendments will only be shared with submitted offerors for potential future discussions or award.
Plastics Material and Resin Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
Federal
UPS System Upgrade
Solicitation # N0016426Q0279
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking to upgrade and calibrate its uninterruptible power supply (UPS) system under contract number N0016426Q0279, with a closing date of August 8, 2026, at 12:00 AM Eastern Daylight Time. The procurement is being conducted as a non-competitive action with Eaton Corporation identified as the intended sole source, although other responsible vendors may submit capability statements for consideration; the government retains sole discretion on whether to proceed with competition. All participants must be registered in the System for Award Management and the contract is designated for small businesses. The requirement falls under NAICS code 334419 and is administered by the Department of Defense. Offers must be submitted via email to Joshua Tester at joshua.e.tester.civ@us.navy.mil, and any amendments to the solicitation will be posted exclusively on sam.gov, making it the vendor’s responsibility to monitor for updates. The place of performance is Crane, Indiana, and secondary point of contact is Shauna Pegg.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
Federal
INSULTING WASHERS
Solicitation # N0016426Q0275
The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting hydrophone backing plates under a sole-source procurement with limited competition, identified by solicitation number N00164-26-Q-0275 and NAICS code 335932. The procurement is authorized under FAR 13.106-1 and is restricted to previously tested and approved vendors—Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine—who are the only entities eligible to submit offers. Although other responsible sources may submit capability statements, the Government retains full discretion to proceed without full competition based on its evaluation. The requirement is classified under FSG 5970 and involves specialized components critical to naval operations. Offerors must be actively registered in the System for Award Management (SAM) and the Joint Certification Program (JCP) to access controlled documentation and be considered for award. The solicitation was issued on July 31, 2026, with responses due by 4:00 PM Eastern Time on August 6, 2026. All submissions must be emailed directly to Cierra Vaughn at cierra.n.vaughn2.civ@us.navy.mil and include all required documentation. Potential vendors are responsible for regularly monitoring sam.gov for any amendments or updates prior to the deadline; changes issued after the closing date will only be shared with submitting offerors. This action falls under FAR Part 13 simplified acquisition procedures and is exempt from public synopsis under FAR 5.202(a)(13). The place of performance is Crane, Indiana, and the contracting office is within the Department of Defense. No set-aside status applies to this procurement.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
New
Federal
Unable to Retrieve Subcontract OpportunitiesNo subcontract opportunities could be identified or decomposed from the prime contract due to system errors, rendering the solicitation non-functional for potential subcontractors. The posting, issued by the Naval Surface Warfare Center Crane under the Department of Defense, was published on July 30, 2026, with a response deadline of August 3, 2026, but lacks essential details such as a solicitation number, NAICS code, set-aside information, organizational type, or point of contact. The place of performance is listed only as city code 17516 without state or zip code, and the office address contains no usable location data. The contract type is classified as subcontract, yet no viable opportunities or requirements are available for bid, making this entry effectively inactive or placeholder in nature.

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Federal
Engineering Change Proposal (ECP) SupportThe contract requires support for the development, documentation, and submission of Engineering Change Proposals to address design or process deviations from drawing 5974788 Revision L, with all changes subject to government approval. This effort is critical to ensuring compliance with technical specifications and maintaining regulatory adherence through formal change control processes. The work is classified as a subcontract under a Small Business Set Aside, specifically designated for total small business participation, with the NAICS code 541330 indicating engineering services. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and the performance location is tied to a site identified as 17516. The contracting agency is the Naval Surface Warfare Center Crane Division under the Department of Defense, and the work is expected to involve close coordination with government representatives to secure necessary approvals for proposed changes. All submissions must align with established technical baselines and procedural requirements for engineering modifications within defense systems.
Engineering Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
Federal
Certificate of Compliance and Quality DocumentationThe contract requires the preparation and submission of Certificates of Compliance for each delivered unit under CDRL A003, ensuring strict adherence to all technical specifications and quality standards. This obligation is central to the deliverables and must be fulfilled for every unit provided under the subcontract. The activity is classified as a Small Business Set Aside under the SBA, with the NAICS code 541611 indicating it pertains to management consulting services, though the nature of the work is tied to quality assurance and compliance documentation for defense-related units. The contract was posted on July 30, 2026, with a deadline for responses on August 7, 2026, and is issued by the Naval Surface Warfare Center Crane under the Department of Defense. Performance is expected to occur at a location designated by the city code 17516, with no additional geographic details provided. The solicitation is part of a broader procurement effort to ensure rigorous quality control across delivered items.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541320
New
Federal
Test and Inspection Services for Seal AssembliesThe contract requires qualified vendors to perform qualification and acceptance testing on seal assemblies to ensure full compliance with drawing 5974788 Revision L. Testing must be conducted according to established procedures, and all results must be documented in Test Inspection Reports designated as CDRL A002, which serve as official verification of adherence to technical specifications. The work is classified as a subcontract under a Small Business Set Aside, with the NAICS code 541320 indicating engineering services, and is being procured by the Naval Surface Warfare Center Crane Division under the Department of Defense. Proposals must be submitted by August 7, 2026, with the work expected to be performed at a location identified by the ZIP code 17516, though no specific city or state is provided. The opportunity is open only to small businesses as defined by the SBA, and all responses must demonstrate technical competency and capacity to deliver accurate, compliant documentation meeting federal contracting standards.
Landscape Architectural Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
Federal
Technical Data Package (TDP) Development and SubmissionThe contract requires the development and delivery of a complete Technical Data Package compliant with Department of Defense standards, encompassing engineering drawings, detailed specifications, test procedures, and manufacturing documentation. This package, designated as CDRL A001, must meet all applicable DoD requirements for technical data and be submitted by the agreed-upon deadline. The effort is structured as a subcontract under a Small Business Set Aside, with the NAICS code 541330 indicating it falls under engineering services, and is intended exclusively for small business concerns. The solicitation was posted on July 30, 2026, with proposals due by August 7, 2026, and the work is to be performed at a location identified by the city code 17516. The contracting agency is the Naval Surface Warfare Center Crane, operating under the Department of Defense, with no specific point of contact provided. All deliverables must align with Defense standards, and the successful offeror will be responsible for ensuring the completeness, accuracy, and formal compliance of the TDP as stipulated in the contract requirements.
Engineering Services

POSTED

2 days ago

DEADLINE

in 7 days
View Details