Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Source Qualification and Technical Data Support

Active

Federal

Response Deadline08/12/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for engineering support focused on preparing and submitting Source Acceptance Review (SAR) packages, managing nonrecurring engineering (NRE) activities, and ensuring full compliance with military qualification requirements and engineering data lists. This support is critical to maintaining the integrity and traceability of technical documentation for defense systems, ensuring all engineering deliverables meet stringent military standards. The work involves close coordination across technical teams to validate data accuracy, update documentation in line with evolving requirements, and facilitate timely approvals for source qualification. The contract is classified as a subcontract under NAICS code 541330, indicating it relates to engineering services. It was posted on August 4, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Performance location details are not specified, but the work is directly tied to defense aviation systems and procurement compliance. The solicitation number is not provided, and no set-aside type is indicated, suggesting it is open to qualified subcontractors without specific socioeconomic preferences. All activities must align with DoD data control and technical documentation protocols to support operational readiness and supply chain certification.

General Info

Engineering support for SAR packages, NRE, and military compliance in defense aviation systems.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 04:59:00 AM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Engineering support to prepare and submit SAR packages, manage nonrecurring engineering (NRE), and ensure compliance with military qualification requirements (QRs) and engineering data lists (EDLs).

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 5 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project on behalf of the Elsinore Valley Municipal Water District in Riverside County, California. The project seeks firms that are certified as Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other small business categories including SBA-certified disadvantaged, women-owned, veteran-owned, and service-disabled veteran-owned small businesses. Services required may encompass engineering, environmental studies, surveying, geotechnical work, permitting, public outreach, utility location, and related professional tasks aligned with NAICS codes such as 541330, 237110, and others listed. Interested firms must submit a qualifications package to Charlie Brown at charles.brown@ghd.com by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026. The formal response deadline for proposals is September 15, 2026, and the work location is within California.

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

The contract seeks engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon, under a Request for Quotation issued by Management & Training Corporation, the operator of the facility. The work must be performed by a licensed Professional Engineer who will deliver signed and stamped engineering drawings, structural calculations, material specifications, and a detailed bill of materials, along with electronic PDF copies and one full-size printed drawing set. The scope is classified under NAICS code 541330 with a size standard of $9 million in annual revenue, and the solicitation is set aside exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. Subcontractors must self-certify their business category and obtain a Unique Entity Identifier and Taxpayer Identification Number, and must also disclose any debarment status if their subcontract exceeds $30,000. Contractors are required to comply with Service Contract Labor Standards and pay no less than the Federal Contractor Minimum Wage as outlined in Executive Order 13658 and Wage Determination SCA WD 2015-5577 Rev. 28. All work must conform to MTC specifications, be free of defects, and meet merchantable standards, with final acceptance occurring only after delivery at the designated MTC point. The contractor must indemnify MTC against all claims, liabilities, or damages arising from their performance, negligence, or breach of contract. The contract mandates strict adherence to federal data protection and privacy requirements, requiring encryption of personally identifiable information and immediate one-hour reporting of any breach to the Department of Labor. Contractors and their employees must also complete any mandatory training designated by the Contracting Officer’s Representative. Although insurance is not required for this project, invoices must include the purchase order number, service dates, itemized pricing with extended unit costs and totals, invoice number, and date, and are to be submitted to MTC’s corporate office in Centerville, Utah. Payment is contingent upon delivery and acceptance of services. The contract may be terminated with thirty days’ written notice by either party, or immediately if government funding ceases. Submission of proposals requires completion of a bid sheet and supplier packet documents, including a W-9, self-certification form, and acceptance of terms, all to be emailed by 2:0

Tongue Point Job Corps

POSTED

about 6 hours ago

DEADLINE

in about 14 hours

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprises (DBE) for professional design, bidding support, and engineering services during construction for the Corydon Well Replacement Project, a municipal groundwater well replacement initiative in California. The project is divided into two phases: Phase 1 involves technical specifications, civil site design, line-bid items for drilling and abandonment of the existing well, bidding assistance, and full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board requirements; Phase 2 focuses on detailed architectural, structural, mechanical, electrical, instrumentation and controls design, and a line-item bid schedule for equipping, testing, and commissioning the new well. The replacement well must match the existing casing depth and use a 24-inch diameter stainless steel Ful-Flo louvered screen with vertical turbine equipment, tie into the Corydon Blend station and Malaga blending location, and comply with AWWA, SWRCB-DDW, DWR, and EVMWD standards. Key deliverables include a Preliminary Design Report at 30% design effort, review of up to 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes. Proposal evaluation is based on six weighted factors: Relevant Qualifications and Experience (25%), Understanding of Project and Project Approach (25%), Scope of Work and Schedule (20%), Innovation (10%), Cost (10%), and Overall Quality of Proposal (10%), with award determined by demonstrated competence rather than lowest cost. The estimated total project cost is $2,260,788, including $2 million in construction costs, with the professional services fee subject to negotiation. Proposals must be submitted via the EVMWD PlanetBids portal by 10:00 a.m. local time on September 1, 2026, following strict formatting guidelines requiring a cover letter, project approach, staff resumes, past project experience, three references, district contract history, a detailed cost proposal broken down by task, and mandatory attachments including American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM Information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, and Public Works Contractor Registration Certification. The contract includes mandatory compliance with Build America Buy America Act requirements, prohibiting procurement of non-domestic iron, steel, and manufactured products without a

Ardurra Group, Inc.

POSTED

about 6 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District in Lake Elsinore, California, seeks professional design, bidding support, and engineering services during construction to replace an existing well facility. The solicitation, issued by AKM Consulting Engineers under bid number C2305, requires a firm to deliver comprehensive engineering expertise throughout all phases of the project, from initial design through construction oversight. The work involves ensuring technical accuracy, regulatory compliance, and efficient coordination of contractor activities to deliver a functional and durable water infrastructure upgrade. The contract opportunity is open to Disadvantaged Business Enterprises under the Department of Transportation’s DBE program, with a response deadline of September 1, 2026. The NAICS code 541330 classifies this as architectural and engineering services, reflecting the technical nature of the required deliverables. Primary contact for questions and submissions is Katie Neubauer of AKM Consulting Engineers, reachable via phone or email. All work will be performed in Riverside County, California, and interested parties are directed to the designated website for additional details and submission guidelines.

AKM Consulting Engineers

POSTED

about 6 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The scope spans two distinct phases: Phase 1 focuses on the design of the well itself, including civil site layout, drilling specifications, abandonment protocols compliant with Riverside County and California State Water Resources Control Board standards, bidding support, and full-time on-site construction management and hydrogeological oversight during drilling. Phase 2 involves the engineering design of all associated site facilities—architectural, structural, mechanical, electrical, instrumentation and controls (I&C)—along with supporting technical specifications for well equipping, testing, and commissioning, while providing continued engineering support through the construction phase. The well casing must be a 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing depth, with sanitary seal placement conforming to AWWA potable water standards. Design and construction must adhere to the Build America, Buy America Act, requiring domestic content for iron, steel, manufactured products, and construction materials, with full documentation, certification, and waiver support mandatory. The project, with an estimated contract value of $1,000,000, is partially funded by a $400,000 Bureau of Reclamation grant, necessitating compliance with all federal requirements under 2 CFR Part 200, including debarment/suspension, lobbying restrictions, and audit obligations. Key deliverables include preliminary, 60%, 90%, and 100% design submittals, each subject to a four-week review period with mandatory workshops to address feedback, and a written comment response matrix for design phases. The Consultant must provide quality assurance and quality control throughout, maintain complete financial and technical records for four years after final payment, and submit monthly itemized invoices accompanied by progress reports detailing work completed, schedule impacts, and future work plans. Payment is due within 45 days of invoice approval. The project is scheduled to commence in November 2026 with completion anticipated by May 2028. Proposals must be submitted via the EVMWD PlanetBids portal by September 1, 2026, and must include comprehensive firm information, relevant project experience, certified DBE participation details, key personnel resumes with California licenses, insurance acknowledgment, conflict of interest disclosure, American Iron and Steel

GEI Consultants, Inc.

POSTED

about 6 hours ago

DEADLINE

MGSU, J-469-DP Cochran Campus Domestic Water System Replacement

Solicitation # PE-47200-RFQ-2026-000000147

The contract solicits design professional services for the Cochran Campus Domestic Water System Replacement at Middle Georgia State University in Cochran, Georgia, under Project No. J-469-DP. The solicitation, identified as PE-47200-RFQ-2026-000000147, was posted on August 4, 2026, with a firm deadline for responses on August 25, 2026, at 7:00 PM. The project is managed by the Board of Regents of the University System of Georgia, with Brian Harrell serving as the primary point of contact for all inquiries, reachable via email at brian.harrell1@mga.edu. All questions regarding the request for quotation or project details must be submitted in writing to this contact. The work is to be performed in Georgia, and while specific NAICS code and set-aside information are not provided, the procurement is classified under state and local government (SLED) procurement. Interested parties must refer to the attached documents for full project specifications and upload instructions as outlined in the solicitation.

Board Of(university System of Georgia) Regents

POSTED

about 12 hours ago

DEADLINE

Engineering Services - Groundwater Monitoring Program

Solicitation # 41-144423

Chesterfield County in Virginia is seeking qualified firms to provide engineering services for a groundwater monitoring program under solicitation number 41-144423. The opportunity was posted on August 4, 2026, with responses due by September 4, 2026, and is open to contractors serving state, local, and education entities. The work will be performed in Chesterfield, Virginia, with a specified zip code of 23832. Vin Kamatchi serves as the primary point of contact, reachable via email at kamatchiv@chesterfield.gov or by phone at 804-717-6342. The solicitation does not specify a set-aside classification or NAICS code, and bidders are expected to comply with all requirements outlined in the official procurement documentation accessible through the provided web link.

Chesterfield County

POSTED

about 14 hours ago

DEADLINE

in about 1 month

RFQ #27-013 Engineering Services

Solicitation # PE-64750-NONST-2027-000000214

The City of Albany, Georgia is soliciting competitive sealed proposals for engineering services to support the development and management of civil infrastructure projects, particularly in utility and transportation construction. Qualified firms or individuals with a proven track record of assisting local governments in successfully delivering such projects are invited to submit bids by 5:00 p.m. on September 9, 2026. Proposals must be delivered to the City’s Procurement Division at 222 Pine Avenue, Suite 260, Albany, GA 31701. This solicitation, identified as RFQ #27-013 with solicitation number PE-64750-NONST-2027-000000214, was posted on August 4, 2026, and is classified as a solicitation under the state, local, and education (SLED) government category. The scope requires engineers capable of providing technical expertise and project management skills tailored to the needs of municipal infrastructure. All responses must demonstrate experience, capability, and a commitment to quality outcomes in alignment with the city’s objectives. For inquiries, contact Destin Adams at dadams@albanyga.gov or 229-302-1461. Additional details and submission guidelines can be accessed through the provided online portal.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

CITY OF TUPELO REQUESTFOR QUALIFICATIONS AND PROPOSAL 2026-037MT The City of Tupelo is seeking Statements of Qualifications and Proposals from interested engineering firms for the purpose of providing full engineering services for PHASE VIII of the MAJOR

Solicitation # 1555-20260728080916 Tupelo

The City of Tupelo is soliciting qualified engineering firms to provide comprehensive engineering services for Phase VIII of its Major Infrastructure Program, with proposals due by September 1, 2026. This procurement requires firms to submit both statements of qualifications and detailed technical proposals demonstrating experience, capacity, and approach to delivering full-service engineering support for a significant public works initiative. The solicitation is administered under the Mississippi Department of Finance and Administration and is open to firms with proven expertise in municipal infrastructure projects, particularly those involving long-term planning, design, and implementation of major civil works. All submissions must be received by the stated deadline and are expected to reflect alignment with the city’s objectives for sustainable, efficient, and community-focused development. The project is located in Tupelo, Mississippi, and performance of services will be primarily based within the city limits, with potential for coordination with local agencies and stakeholders throughout the engineering lifecycle.

POSTED

about 16 hours ago

DEADLINE

Quality Assurance and Technical Compliance SupportThe contract titled Quality Assurance and Technical Compliance Support encompasses a range of quality control, testing, and documentation services designed to ensure full adherence to military standards. This includes the preparation and management of Material Safety Data Sheets, detailed inspection reports, and comprehensive traceability systems to guarantee the integrity and compliance of all materials and processes. The work is critical to maintaining defense-grade quality and regulatory alignment across the supply chain, requiring strict procedural discipline and technical expertise. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 541330 indicating its classification under engineering services. The solicitation is managed by the ASC Commodities Division within the Department of Defense and is open for response until August 19, 2026, with the original posting date of August 4, 2026. The place of performance and specific location details are not specified, but all deliverables must meet the rigorous technical and administrative requirements demanded by military specifications. Participation is restricted to small businesses qualifying under the SBA’s set-aside program.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Defense Telecommunications Equipment ScreeningThe contract seeks technical review and certification services to ensure that telecommunications equipment supplied under the agreement complies with DFARS 252.204-7016 and Section 889 of the National Defense Authorization Act, which prohibit the use of equipment from foreign adversaries. The vendor must verify that all telecommunications products do not originate from or contain components sourced from entities designated as covered foreign adversaries, such as Huawei, ZTE, and other specified organizations, to safeguard national security interests. Compliance requires thorough documentation, supply chain tracing, and formal attestation confirming adherence to federal regulations governing the procurement of secure telecommunications infrastructure. The subcontract is issued by the ASC Commodities Division under the Department of Defense with a NAICS code of 541330, indicating it pertains to other scientific and technical consulting services. The opportunity was posted on August 4, 2026, and responses are due by August 19, 2026. The place of performance and specific agency location are not detailed, but the work is expected to support defense-related telecommunications systems. All proposers must demonstrate capability to conduct rigorous technical evaluations and provide legally defensible certification statements. The contract is open for bidding through the DIBBS platform and does not include any set-aside provisions for specific business categories.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Small Business Subcontracting Plan DevelopmentThe contract requires the development and submission of a Small Business Subcontracting Plan to assist a prime contractor in meeting its federal subcontracting goals as outlined under FAR 52.219-9, ensuring compliance with federal small business participation requirements. The plan must be structured to support meaningful opportunities for small businesses across relevant industries, with a focus on the NAICS code 541611, which pertains to Management Consulting Services. The submission deadline is September 3, 2026, and the effort is being managed by the Department of Defense through the Defense Logistics Agency Aviation in Oklahoma City. There is no set-aside designation specified for this contract, and the place of performance details are unspecified, indicating that the plan may be developed remotely or tailored to support prime contractor operations across multiple locations. The work must be completed and delivered by the stated deadline to enable the prime contractor to fulfill its regulatory obligations under federal contracting rules. While no point of contact is listed, the proposal must align precisely with the requirements of FAR 52.219-9 to be considered acceptable and actionable.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Packaging and Containerization of Aerospace HardwareThe contract entails the military-compliant packaging and containerization of aerospace hardware using skids and inserts, strictly adhering to ASTM-D-6199 and A-A-55057 standards to ensure durability, protection, and compliance with defense logistics requirements. All packaging solutions must meet rigorous environmental and handling specifications for secure transport and long-term storage of sensitive aerospace components under military-grade conditions. The work is subcontracted under a procurement initiated by the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, with performance expected to align with designated defense supply chain protocols. The solicitation was posted on August 4, 2026, with a response deadline of September 3, 2026, at 8:00 PM Eastern Time, allowing potential vendors a minimum of four weeks to prepare and submit proposals. The North American Industry Classification System code 561910 applies, indicating the focus on support activities for transportation and packaging services. While no set-aside provisions are specified, the contract is structured as a subcontract and requires full compliance with federal defense packaging mandates without exception. All submissions must demonstrate technical expertise in military packaging systems and proven capability to execute under the referenced standards.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

First Article Testing and Quality DocumentationThe contract requires the execution and documentation of First Article Testing (FAT) to ensure compliance with government quality standards, specifically involving the submission of Inspection and Measurement Systems (IMS), Product Orientation Specifications (POS), and comprehensive test reports for official approval. All documentation must be meticulously prepared and submitted within the specified timeline to meet federal requirements, with emphasis on accuracy, traceability, and adherence to technical specifications established for defense-related components. The work is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with a firm response deadline of September 3, 2026. Participation is open to qualified entities capable of delivering certified FAT outcomes and quality assurance documentation without set-aside restrictions, and performance is tied to ensuring the readiness and acceptance of products within the defense supply chain.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Precision Machining of Titanium Alloy ComponentsThe contract calls for precision CNC machining, milling, and finishing of high-strength titanium alloy components designed for aerospace nozzle systems, requiring advanced manufacturing capabilities to meet stringent aerospace integrity and performance standards. Work must adhere to tight tolerances and material specifications native to titanium alloys used in high-temperature, high-stress environments, with all processes ensuring dimensional accuracy, surface finish, and structural integrity critical to mission-critical propulsion applications. The work is classified as a subcontract under NAICS code 332813, indicating specialized metal forging and stamping activities with a focus on custom machining. The opportunity is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with response submissions due by September 3, 2026. There is no set-asides designated for small businesses or other categories, and the place of performance is not specified in detail, implying flexibility in location provided the deliverables meet contractual and technical requirements. Interested parties must possess the technical expertise, equipment, and quality control systems necessary to handle aerospace-grade titanium under controlled manufacturing conditions, with all completed parts expected to be fully traceable and compliant with defense industry specifications.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 22 hours ago

DEADLINE

Aerospace Actuator and Nozzle Hardware InstallationThe contract calls for the installation and mechanical integration of precision aerospace components, specifically actuators, sync rings, and associated hardware for titanium alloy nozzle assemblies. This work requires high-accuracy fabrication and assembly techniques to meet the stringent performance and reliability standards of aerospace applications. All components must be integrated with strict adherence to engineering specifications to ensure functional compatibility and structural integrity under extreme operating conditions. This is a subcontract opportunity under the NAICS code 332994, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 4, 2026, with a firm response deadline of September 3, 2026, at 8:00 PM. The place of performance and specific location details are not provided, but the work is expected to support critical defense aerospace systems. Interested parties must submit proposals by the deadline to be considered, and no set-aside classifications are indicated, meaning the contract is open to all eligible subcontractors.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 22 hours ago

DEADLINE

Aerospace Component Supply Chain ManagementThe contract entails end-to-end supply chain management for aerospace components specifically tailored to meet military compliance requirements, with a strong emphasis on sourcing long-lead and diminishing manufacturing source items that are critical to defense systems. The scope includes full traceability throughout the supply chain, secure logistics coordination, and comprehensive documentation to ensure adherence to stringent defense standards. Services must support uninterrupted availability of parts vital to military aircraft and equipment, requiring proven experience in navigating complex procurement challenges associated with obsolescence and restricted sourcing. The solicitation is classified as a subcontract under NAICS code 423830 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Bidders must submit responses by the deadline of August 12, 2026, at 4:59 a.m. Eastern Time, with the opportunity posted on August 4, 2026. While the place of performance and point of contact details are not specified, compliance with federal defense supply protocols and the ability to deliver verified, auditable supply chains are fundamental to qualification.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Hydraulic Accumulator Manufacturing and SupplyThe contract involves the full-cycle manufacturing, testing, packaging, and delivery of 33 hydraulic accumulators identified by part number M5498-1 and NSN 1650-00-640-8485, with all components sourced and assembled in strict compliance with applicable military specifications. The work encompasses every stage from raw material procurement and fabrication through rigorous quality assurance testing and final packaging for secure shipment, ensuring the end products meet the performance, durability, and safety standards required for defense applications. The opportunity is structured as a subcontract with a NAICS code of 332994, indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing, and is issued under the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, providing a tight nine-day window for interested parties to submit proposals. The place of performance and contact details are not specified, but the requirement demands adherence to federal defense logistics protocols and full traceability of materials and processes.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 22 hours ago

DEADLINE

AXIL PISTON PUMP_End_Item_B-52_NSN_4320-01-564-1570HS_PN_51197

Solicitation # FD20302700085

The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of Axial Piston Pumps with part number 51197 and NSN 4320-01-564-1570HS, intended for use on the B-52 platform. This effort, identified by Notice ID FD20302700085 and classified under NAICS code 336413 with a size standard of 1,250 employees, is not a solicitation and no contract will be awarded based on responses. The government seeks input from all types of businesses including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone companies, and women-owned small businesses to assess market capability and determine if the requirement can be competed or set aside for small business participation. The estimated requirement is for 33 units, and potential suppliers must demonstrate the ability to handle full-cycle manufacturing including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of diminishing manufacturing sources and material shortages. Responses are to be submitted via the “Add Me to Interested Vendors” button by the deadline of August 12, 2026, at 4:59 a.m. Central Standard Time, and all communications must be directed to the workflow email 423scms.guea.workflow@us.af.mil. The government will use the collected information solely to inform future acquisition strategy, including possible segmentation by airframe, and will not evaluate or reward submissions. There are no funds allocated for this market research effort, and no obligation is created for the government by publishing this notice. Potential vendors are advised that nonrecurring engineering costs may be incurred to qualify as an approved source, and unit pricing will be determined at the time of any future contract award. The place of performance for any resulting contract will be Tinker AFB, Oklahoma.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

SERVOCYLINDER_End_Item_F-15_NSN_1650003135013_PN_3151-015

Solicitation # FD20302700163

The U.S. Air Force, through the 423rd SCMS Requirements Office at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Servocylinder with NSN 1650-00-313-5013 and Part Number 3151-015, intended for F-15 platforms. This effort is a Sources Sought Synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on responses. The requirement is for approximately 31 units with a potential range of 8 to 47, and interested vendors must demonstrate capability in full manufacturing, including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources and long-lead time parts. Nonrecurring engineering costs associated with qualification as an approved source may also be required. The North American Industry Classification System code is 336413 with a size standard of 1,250 employees, and the government is actively seeking participation from all business categories including Small Businesses, Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses. Responses must be submitted through the designated workflow email, and all actions must occur within the specified timeline under Central Standard Time.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

HOUSING/INDICATOR_End_Item_B-52_NSN_6680011726958RK_PN_10006-1002-01

Solicitation # FD20302602505

The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential vendors capable of manufacturing spares for the Housing/Indicator part with NSN 6680-01-172-6958RK and P/N 10006-1002-01, intended for use on the B-52 platform. This effort, identified by Notice ID FD20302602505, is a Sources Sought synopsis under FAR Part 10 and is not a solicitation or a commitment to award a contract; no funds are available at this time. The Government is seeking information from all types of businesses including large firms, small businesses, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses to assess competition and determine if the requirement can be set aside for small business participation. The estimated requirement is for 60 units, and potential suppliers must demonstrate the ability to perform full-scale new manufacture including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources. The contract activity falls under the NAICS code 336413 with a size standard of 1,250 employees, and performance would be centered at Tinker AFB, Oklahoma. Interested parties must register via the “Add Me to Interested Vendors” function to be considered; responses will not be evaluated as bids and no formal solicitation currently exists. The government will use the collected information to shape future acquisition strategies, potentially breaking the requirement by airframe or other criteria, and will consider nonrecurring engineering costs associated with qualifying as a new source. All communications and responses must be sent to 422.scms.afmc.rfi@us.af.mil, and responses are due by September 4, 2026, in Central Standard Time. The Office of the Department of the Air Force, under the Air Force Sustainment Center, is leading this effort to ensure a robust and capable industrial base for critical spare parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Hydraulic Accumulator_End_Item_KC-135_NSN_1650-00-640-8485_PN_M5498-1

Solicitation # FD20302700112

The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Hydraulic Accumulator with NSN 1650-00-640-8485 and Part Number M5498-1, intended for use on the KC-135 platform. This effort is a Sources Sought synopsis under FAR Part 10, not a solicitation or procurement action, and no contract award is anticipated based on responses. The Government seeks to determine if the requirement for 33 units can be competitively sourced and whether it is suitable for a Small Business Set-aside, and is interested in submissions from all types of businesses including Small, Small Disadvantaged, 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned Small Businesses. Respondents must be capable of managing full production cycles including component procurement, inspection, testing, packaging, shipping, and addressing supply chain challenges such as diminishing manufacturing sources and long-lead parts acquisition, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. The procurement is classified under Federal Stock Class 1650 and NAICS Code 336413, which carries a size standard of 1,250 employees. The place of performance is Tinker AFB, Oklahoma, and all communications must be directed to the designated workflow email, 423scms.guea.workflow@us.af.mil. Interested parties must actively select the "ADD ME TO INTERESTED VENDORS" button to participate; responses outside this mechanism will not be acknowledged. The market research window opened on August 4, 2026, and closes on August 12, 2026, with all timestamps in Central Standard Time. No funding is currently available for this research phase, and the resulting data will solely inform the Air Force’s future acquisition strategy, including possible separation of requirements by airframe. Any solicitations or contracts for this item will be issued separately in the future.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

NSN: 2840-01-374-0735NZ, P/N: 4080513, NOUN: SUPPORT, AUGMENTER PR FD2030-25-00159

Solicitation # SPRTA126R0386

The contract solicitation SPRTA1-26-R-0386 seeks Augmenter Support components identified by NSN 2840-01-374-0735NZ and Part Number 4080513, intended for use on F-100 engines. The item is a nozzle assembly fabricated from Titanium Alloy that provides structural support for actuators, sync rings, and related hardware. The procurement includes 32 units under Line Item OOO1 with a baseline quantity of 32, minimum of 9, median of 34, and maximum of 51 units, alongside first article submissions: two production units, one expended unit, one test plan, and one test report. Only qualified suppliers—Barnes Group, RTX Corp, and Jedco Inc.—are eligible to respond, and all offers must comply with qualification standards per FAR clauses 52.209-1 or 52.209-2. The acquisition is subject to export control regulations and may be impacted by Free Trade Agreements, though commercial item policies under FAR Part 12 are not being applied. Electronic submission is required, and all inquiries must be directed to Alex Varughese via email; no phone requests are accepted. An independent Ombudsman is available to address contractor concerns during the proposal phase, maintaining strict confidentiality without influencing source selection. The solicitation will be accessible via SAM.gov with a response deadline of August 4, 2026, and awards will be contingent on meeting all technical, qualification, and compliance requirements at the time of award.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE