Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on May 30, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

SOURCES SOUGHT for Inland Navigation Planning for U.S. Army Corps of Engineers, Huntington District

Closed
W9123725NAV1Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
2026 AC Water Main Replacement
Solicitation # 2026-RFQ-042
Solicitation 2026-RFQ-042 is a request for qualifications from the City of Mercer Island Public Works department for professional engineering services to design water system upgrades. The project focuses on replacing approximately 5,000 linear feet of aging asbestos cement water mains with ductile iron mains along SE 40th St and E Mercer Way. The scope is divided into two phases: Phase 1 involves water system and PRV vault replacement on SE 40th St from Greenbrier Ln to 97th Ave SE, and Phase 2 extends the replacement to 97th Ave SE and the 3700 and 3800 blocks of East Mercer Way. Additional components for replacement include fire hydrants and water services. The design must comply with the Reduction of Lead in Drinking Water Act and the City of Mercer Island Standard Details Water. The project follows a goal-based timeline with bid-ready plans for Phase 1 due by Q2 2027 and Phase 2 by Q3 2027, with overall construction completion targeted for Q2 2028. Qualified firms must be licensed in the State of Washington and submit a Statement of Qualifications limited to 12 pages, including a proposed timeline and three references from the last five years. Selection is at the sole discretion of the City, and the awarded firm will negotiate a scope and fee schedule using the City's standard professional services agreement. Administration is managed by the City Manager, with payments issued via City warrant within 45 days of receiving a proper monthly invoice.
Public Works

POSTED

about 9 hours ago

DEADLINE

in 14 days

General Info

NAICS

541330 - Engineering Services

Place of Performance

Huntington, WV, 25701, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W072 Endist Huntington
Contacts2 people available
OfficeHUNTINGTON, WV, 25701-5000, USA
Office AddressHUNTINGTON, WV, 25701-5000, USA

Full Description

Show more
1. Action Code: X 2. Date: 05/30/2025 3. Year: 2025 4. Contracting Office Zip Code: 25701-2070 5. Product or Service Code: C211 6. Contracting Office Address: US Army Corps of Engineers, Huntington District 502 8th Street Huntington, WV 25701-2070 7. Subject: D - SOURCES SOUGHT for Inland Navigation Planning for U.S. Army Corps of Engineers, Huntington District 8. Proposed Solicitation Number: W9123725XXXX 9. Closing Response Date: 06/30/2025 10. Contract Points of Contact: Brittani L. Stowers, Contract Specialist, brittani.l.stowers@usace.army.mil; (304) 399-5762 Danielle L. Roar, Procuring Contracting Officer, Danielle.L.Roar@usace.army.mil; (304) 399-5348 11. Contract Award Number: N/A 12. Contract Award Dollar Amount: N/A 13. Contract Line-Item Number: N/A 14. Contract Award Date: N/A 15. Contractor: N/A 16. This is a SOURCES SOUGHT notice to determine the capabilities of firms. This notice does not constitute a solicitation announcement, nor does it restrict the Government to an ultimate acquisition approach. No solicitation or technical scope of services is available currently. The Government will use the responses to this SOURCES SOUGHT notice to make acquisition decisions. Small businesses are strongly encouraged to review this SOURCES SOUGHT and submit according to the directions in this notice. NO SOLICITATION, SPECIFICATIONS, OR DRAWINGS are available for this notice. Responses to this Sources Sought notice will be used by the Government to make appropriate acquisition decisions. The purpose of this notice is to gain knowledge of potentially qualified large and small business sources to include small businesses in the following categories: Small Business, Small Disadvantaged Business, Certified HUBZone, Woman-Owned, and Service-Disabled Veteran-Owned. Work would occur as assigned to Districts within the U.S. Army Corps of Engineers, Great Lakes and Ohio River Division, which includes the Buffalo, Chicago, Detroit, Huntington, Louisville, Nashville, and Pittsburgh Districts, though will primarily occur through the Huntington District. However, work may occur outside the Great Lakes and Ohio River Division as the Inland Navigation Center is a National Center and has projects across the Nation. Contractor shall demonstrate through professional registration, company, and personnel resumes, executed examples, and supporting customer feedback documentation its ability to provide Planning Services in support of the following activities: A working knowledge of the Corps six-step planning method as described in Corps of Engineer Regulation (ER 1105- 2-100) and its application to such agency missions as flood risk management, ecosystem restoration, navigation, hydropower, water supply and watershed planning. Contractor shall be capable of applying certified Corps federal statutes, regulations and planning models as may be needed to address water resources problems with emphasis on the National Environmental Policy Act (NEPA), including but not limited to associated federal laws and implementing regulations such as the Endangered Species Act, Clean Water Act, Clean Air Act, National Historic Preservation Act, and Engineering Regulation 200-2-2. Contractor shall be capable of applying certified Corps models as may be needed to address Planning Services and capability must be exhibited in these areas: Economic analysis Plan alternatives identification, formulation, analysis and cost evaluation Physical and Biological baseline condition (including Cost-Effectiveness and Incremental Cost Analysis used for Habitat Units and mitigation) National and regional demographic and economic forecasts Environmental Impact Assessments Biological Assessments Master planning Public involvement programs Ecosystem restoration techniques/measures Development of reconnaissance level/preliminary concept plans Historic property and cultural resource management Water resources planning, investigations and analysis Environmental baseline studies and impact assessment Landscape architecture and community planning Watershed Planning Community planning Site planning Terrestrial and aquatic environmental design Architectural renderings Landscape architectural planning and design Landscape design and plant materials plans Visual resource analysis Transportation planning, modeling and economic analysis, with particular attention to deep/shallow draft inland navigation and port studies and peer reviews of these studies; and database management Social impact analysis Transportation system modeling and benefit estimation Bulk, neo bulk and container flows and projections Shipper and carrier surveys and interviews Freight transportation rate and cost analyses Navigation externality analysis Intermodal operations planning and Industrial/port site identification and investigation Inland shallow draft and deep draft fleet inventories and forecasts Risk and uncertainty analyses Discrete event simulation analyses of freight transportation features Database management and interface design, implementation and maintenance Technical Writing Proficiency Shallow and deep draft inland navigation planning Financial analysis and planning Mathematical programming (linear programming, genetic algorithm, GAMS, C-plex, and other solver and optimization techniques) Recreation demand modeling and forecasting Marketability and feasibility analyses Regional economic forecasting procedures Geospatial data interpretation and management Post flooding event damage compilations Nature-Based Solutions Risk and uncertainty analyses The submission is limited to 15 pages (30 front and back), to include: Contractor's name, address, point of contact, phone number, and e-mail address. 2. Contractor's interest in proposing on a solicitation, if issued. 3. Contractor's capability to perform a contract of this complexity and examples of comparable work performed within the past 5 years based on the above criteria. 4. Describe the professional qualifications of your firm. Provide the number and qualifications of registered professional personnel in the key disciplines noted above. 5. Describe your firms' capacity to perform up to approximately $4,000,000.00 in work of the required type within a one-year period and accomplish the anticipated work in an efficient and quality manner. This work will likely be for multiple task orders within a given year across a broad geographic area. 6. Verification of any Small Business Administration (SBA) certification(s), if applicable. IMPORTANT NOTICE: Effective September 26, 2018, and in accordance with FAR Clause 52.204-7, - an Offeror is required to be registered in SAM when submitting an offer or quotation, and shall continue to be registered until time of award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. This does not apply to being able to submit a response for this sources sought but would apply to a synopsis that is posted for similar requirements. All interested contractors should provide a response by close of business, June 30, 2025. Submit your response to Brittani L. Stowers via email at Brittani.L.Stowers@usace.army.mil and Danielle L. Roar via email at Danielle.L.Roar@usace.army.mil. Electronic submission is required. 17. Place of Contract Performance: N/A 18. Set Aside Status: Unknown at this time.

More opportunities from Department Of Defense → W072 Endist Huntington

Same awarding agency

NAICS: 237990
New
Federal
Winfield Locks and Dam Major Rehab Industry Day
Solicitation # W91237-27-SN-0001
The Winfield Locks and Dam Major Rehabilitation Project, managed by the U.S. Army Corps of Engineers Huntington District, is a comprehensive infrastructure modernization effort designed to extend the facility's operational life by 50 years. The scope of work includes the full replacement of five standard roller gates and one specialized flap gate, along with the rehabilitation of 1930s-era electro-mechanical drive systems. Critical structural repairs involve replacing the post-tensioned Tainter Gate anchorage system due to stress corrosion cracking and proactively replacing the Main Lock Miter Gate anchorages. Additionally, the project encompasses the replacement of the Dam Service Bridge, modernization of electrical service distribution and SCADA systems, and the replacement of worn components within the Main Lock Emergency Gate Machinery. To facilitate this effort, an Industry Day event is scheduled for November 02, 2026, featuring a presentation at the Winfield Community Center and a site walkthrough at the Winfield Locks and Dam. Interested prime contractors and subcontractors must register by November 01, 2026, at 12:00 PM Noon. The event includes opportunities for in-person one-on-one meetings for prime contractors on the day of the event, with virtual sessions available for all partners starting November 03, 2026. Technical requirements for the project include strict adherence to ASTM A578 for ultrasonic inspections of plates and AWS D1.5 for reinforcing fillet welds, with specific performance testing required for bar anchor installations.
Other Heavy and Civil Engineering Construction

POSTED

5 days ago

DEADLINE

in 12 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS