Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on August 9, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sources Sought for M72 LAW (HA21) Sub-caliber Training Rockets

Closed
W15QKN18X03FXFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

5 days ago

DEADLINE

in 10 days
NAICS: 332993
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 2 days
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize and enhance ammunition manufacturing capabilities. The program focuses on integrating advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile and resilient industrial base. Key objectives include accelerating digital transformation via IoT platforms and advanced analytics, improving supply chain resilience, enhancing workforce capabilities, and promoting sustainable manufacturing practices, all while maintaining strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, the solicitation allows for awards via fixed-price contracts or Other Transaction Agreements. The selection process is phased, beginning with the continuous acceptance of unclassified Phase I white papers and PowerPoint briefings, followed by Phase II pitch sessions, and concluding with detailed Phase III technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Successful efforts are intended for funding in Fiscal Year 2026, with typical periods of performance ranging from two to five years. Large business offerors are required to submit comprehensive subcontracting plans targeting various small business categories.
W6QK Acc-Ri

POSTED

20 days ago

DEADLINE

in about 2 months

General Info

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

NJ

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Pica
Contacts1 person available
OfficePICATINNY ARSENAL, NJ, 07806-5000, USA
Office AddressPICATINNY ARSENAL, NJ, 07806-5000, USA
Contacts
Reagan W. WeltnerContract Specialist

Full Description

Show more
INTRODUCTION The Army Contracting Command New Jersey (ACC-NJ) is issuing this sources sought synopsis as a means of conducting market research to identify potential sources having an interest and industry technologies available to support/provide the HA21 Sub-caliber Training Rockets. This effort will be a production program supporting Army and Marine Corps ammunition stockpile requirements, and will be used in the execution of training in the XM808 Bunker Defeat Munition (BDM) Sub-caliber Trainer for the BDM, as well as the M72AS Sub-caliber Trainer for the M72 LAW Family of munitions. The period of performance (POP) of this requirement is expected to be twelve (12) months. Delivery of HA21 to the customer is required no more than 9 months after delivery order award. The result of this market research will contribute to determining the method of procurement, if a requirement materializes. Based on the responses to this sources sought notice/market research, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. Multiple awards may be made. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. PROGRAM BACKGROUND The supply of HA21 training rockets for Army and USMC customers is a recurring requirement to maintain adequate training on the BDM and M72 LAW munitions. The HA21 has been used in training by US Forces for more than 20 years. REQUIRED CAPABILITIES Non-Developmental Item. The HA21 21mm Training Rocket should be a non- developmental item to the maximum extent possible. Qualification. The HA21 training rocket provides the soldier with the ability to train on the BDM and M72 LAW for the purpose of weapon preparation, target acquisition, firing procedures, aiming procedures, and marksmanship training. The HA21 training rocket also exhibits realistic launch and backblast characteristics similar to the BDM and M72 munitions, at a fraction of the cost of a tactical munition. SPECIAL REQUIREMENTS Any resulting contract is anticipated to have a security classification level of UNCLASSIFIED. Any resulting contract shall be compliant with the specialty metals restriction of the Berry Amendment (10 U.S.C. 2533a and 2533b) in accordance with DFARS clauses 252.225-7008 and 252.225-7009. ELIGIBILITY The applicable NAICS code for this requirement is 332993 Ammunition (except Small Arms) Manufacturing with a Small Business Size Standard of 1500 Employees. The Product Service Code (PSC) is 1340 Rockets, Rocket Ammunition, and Rocket Components Includes: Complete Rounds; Explosive Components, Including Warheads; Pyrotechnic Rockets; Solid Fuel JATO Units; Rocket Motors (Solid Propellant Units) for Rockets; Covers, Protective Rocket Warhead; Jettisonable Rocket Launchers; Conditioning Kits and Sets, Controlled Environment; and other peculiar components which are not classified elsewhere. Excludes: Nuclear rockets, Nuclear warheads; all other warheads for use on other than rockets; and rockets with built-in guiding devices. SUBMISSION DETAILS Interested businesses should submit a brief capabilities statement package (no more than ten 8.5 X 11 inch pages, font no smaller than 10 point) demonstrating ability to provide the products/systems listed in this Technical Description. Documentation should be in bullet format. No phone or email solicitations with regards to the status of the RFP will be accepted prior to its release. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Reagan Weltner, in either Microsoft Word or Portable Document Format (PDF), via email reagan.w.weltner.civ@mail.mil no later than 12:00 p.m. EDT on 20 August 2018 and reference this synopsis number in subject line of e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. If your organization has the potential capacity to provide the required products/systems, please provide the following information: 1) Business size, 2) Organization name, address, primary points of contact (POCs) and their email address, FAX, Web site address, telephone number, and type of ownership for the organization; and 3) Tailored capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. Identify if all requirements can be met. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.

More opportunities from Department Of Defense → W6QK Acc-Pica

Same awarding agency

NAICS: 541511
Federal
Software Integration and Interoperability ServicesThe contract awards services to maintain and enhance associative interfaces between ABAQUS and leading third-party CAD tools including Pro/ENGINEER, CATIA, and Wave6, ensuring seamless data exchange and workflow integration for engineering simulation users. The work focuses on sustaining existing interoperability capabilities while advancing functionality to support evolving software versions and user requirements, with an emphasis on reliability, performance, and user experience across multi-platform environments. This effort supports defense-related engineering workflows by bridging design and analysis ecosystems critical to product development and simulation fidelity. The contract is classified as a subcontract under NAICS code 541511 for custom computer programming services, issued by the Department of Defense through its W6QK Acc-Pica agency, with performance required in Waltham, Massachusetts, 02451. Although details such as solicitation numbers and point of contact are not provided, the posting date of May 14, 2026 indicates the agreement is anticipated to commence following a future competitive process. The scope demands deep technical expertise in CAE software architecture, API development, and cross-platform integration to ensure continued compatibility and functionality between industry-standard design tools and ABAQUS simulation solutions.
Custom Computer Programming Services

POSTED

5 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS