Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SOURCES SOUGHT-Motorized Precision Pan-Tilt Positioner-REQUEST FOR INFORMATION (RFI)

Active
N00167-26-SIMACQ-CD-74-0025Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Surface Warfare Center Carderock Division is issuing a Request for Information under solicitation N00167-26-SIMACQ-CD-74-0025 to identify capable sources for a motorized precision pan-tilt positioner. This equipment will be used to remotely mount and operate sensing equipment, including cameras, calibration targets, and weather instruments. The procurement is currently designated as a total small business set-aside under NAICS code 334511. This is a market research effort to determine the feasibility of various set-asides and will not result in a direct contract award from this specific announcement. Technical requirements for the positioner include a payload capacity of at least 40 lbs, a total device weight of no more than 40 lbs, and an IP67 water and dust protection rating. The system must support continuous 360 degree azimuthal pan and 0 to 90 degree elevation tilt with speeds of at least 0.1 degrees per second and position feedback resolution of 0.1 degrees or less. Connectivity must support RS232, RS422, RS485, or Ethernet interfaces using OEM software or serial data transmission, and the unit must operate in temperatures as low as minus 10 degrees Celsius. Interested organizations must submit a comprehensive capability statement, including company information, technical documentation, and an active CAGE code, to the designated point of contact by 9:00 AM EST on October 21, 2026.

General Info

RFI for small business sources for a motorized precision pan-tilt positioner.

Agency

Department Of Defense → Nswc CarderockView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

MD, 20817, USA

Set-Aside

SBA

Documents

(1)

Pan-Tilt Positioner Minimum Specifications

PDF•1 page•specifications

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Carderock
Contacts2 people available
OfficeBETHESDA, MD, 20817-5700, USA
Organization / Agency
Department Of Defense → Nswc Carderock
View Agency Profile
Office AddressBETHESDA, MD, 20817-5700, USA
Contacts
Lametria Smith
contact@example.gov
+1 (555) 000-0000
Barbaraann K Witz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

The Naval Surface Warfare Center Carderock Division (NSWCCD) requires a motorized pan-tilt positioner, in accordance with attached minimum specifications, that will be utilized to mount sensing equipment such as cameras, calibration targets, weather equipment, etc., allowing the operational capability to pan and tilt the equipment remotely. 


This is a Request for Information (RFI)/Sources Sought notice only. This is not a request for proposals, and no contract will be awarded directly from this announcement. The information gathered will be used to support acquisition planning and determine the feasibility of various small business set-asides.


Organizations with the potential capacity to provide the requested supply item are asked to submit a written Capability Statement containing the following information:


1. Company Information: Organization name, physical address, email address, website address, telephone number, and size and type of ownership for the organization.


2. Technical Capability Statement: Tailored capability statements addressing the particulars of this effort, with appropriate technical documentation (such as product datasheets) supporting claims of organizational and staff capability.


3. CAGE Code: Active Contractor and Government Entity (CAGE) Code.


4. Socio-Economic Business Size: Size of business (e.g., Large Business, Small Business, Small Disadvantaged, 8(a), HUBZone, Woman-Owned, and/or Veteran-Owned). If significant subcontracting or teaming is anticipated in order to deliver the technical capability, organizations should clearly address the administrative and management structure of such arrangements.


NOTE: Only information provided in the written Capability Statement shall be considered during the market research phase.


Capability Statements shall be submitted via e-mail to: lametria.r.smith.civ@us.navy.mil no later than 9:00 AM EST on 21 October 2026.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
SLED
Fish & Wildlife, Custom Designed Solar-Powered PIT Tag Detection Array
Solicitation # 9_15_26-Resident_Fish_Division_RFP_Custom_Designed-Solar-Powered-PIT-Tag-Detection-Array.pdf
The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is soliciting proposals for the design, construction, and installation of a custom solar-powered full duplex PIT tag detection array on the Sanpoil River in Washington State. The system must feature two antenna systems to detect the movement direction of tagged salmonids and be engineered to operate reliably under river flows of 100 to 400 cfs while resisting debris and environmental hazards. The contractor is responsible for the full project lifecycle, including site assessment, the supply and assembly of all hardware such as readers and mounting infrastructure, electrical integration via a solar energy system with battery storage, and final commissioning through testing and calibration. Deliverables include wiring diagrams, maintenance instructions, and staff training. The project follows a phased timeline, with all parts delivered to the Colville Tribes FW office by February 28, 2027, and final installation and training completed by August 31, 2027, pending permit approvals. Award selection is based on a combination of budget and technical capability, with significant scoring weight given to TERO status, specifically favoring Colville Business Enterprises. Selected contractors must provide comprehensive insurance coverage, including commercial general liability and workers compensation, and may be required to provide a performance bond for contracts exceeding 100,000 dollars. All disputes are subject to the jurisdiction of the Colville Tribal Court, and the contract is subject to the availability of tribal treasury funds on a yearly renewable basis.
Confederated Tribes of the Colville Reservation

POSTED

about 7 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
DIBBS
Supply of Rate of Flow Indicator (NSN 6680015129477)
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
Position Indicator Supply (NSN 6610-01-614-6477)
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
Supply of Self-Locking Clinch Nuts (P/N 1942431-6)This subcontract involves the supply of self-locking clinch nuts, specifically part number 1942431-6, for prime contractors supporting DLA Aviation projects. The items must be manufactured or sourced according to Honeywell Intl Inc-Defense Avionics Systems specifications and delivered to Tracy, ZIP 95304-5000. The contract is managed by the ASC Commodities Division of the Department of Defense under NAICS code 334511. The supplier must adhere to strict regulatory and technical standards, including MIL-STD-129 for marking and RQ017 for bare item identification. Compliance with the Buy American Act and the Berry Amendment is mandatory, as is adherence to NIST SP 800-171 cybersecurity requirements. All deliveries must be properly marked, packaged, and accompanied by the necessary receiving reports.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CONTROL, ALARM
Solicitation # SPE4A6-26-T-35EX
Solicitation SPE4A6-26-T-35EX is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 24 units of alarm controls, identified by NSN 6340-01-352-0080. This is a fixed-price acquisition requiring the items to be in conformance with The Boeing Company drawing 7-211E10002, Rev J. The procurement is a critical application item with a required delivery date of June 13, 2028, and a need ship date of May 7, 2028. Delivery is FOB Origin, with both inspection and acceptance occurring at the origin. The contract mandates strict quality and cybersecurity standards, including a CMMC Level 2 Self-Assessment and compliance with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow system.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SCINTILLATOR
Solicitation # SPE7M1-26-T-368E
This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-368E, is for the procurement of one Scintillator, identified by NSN 6665-01-587-7641. The contract requires delivery within 20 days after receipt of order and is categorized under NAICS code 334511. The procurement is subject to several technical and quality requirements, including DLA packaging standards and specific guidelines regarding items that may contain batteries. Offerors must adhere to the DLA Master List of Technical and Quality Requirements and ensure the removal of government identification from any non-accepted supplies. Additionally, alternate offerors are required to provide a complete data package for both approved and alternate parts.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-368K
This contract is for the procurement of gas detectors, specifically NSN 6665016278701, with a total quantity of six units split across two line items. The items are identified as critical application components and are associated with Honeywell Analytics Inc and Teledyne FLIR. Delivery is required within 20 days of order, with shipping destinations including McConnell AFB in Kansas and Aviano, Italy. The agreement mandates strict adherence to several regulatory and technical standards, including CMMC Level 2 self-assessment, Covered Defense Information requirements, and DLA packaging and marking standards. Because the items may contain batteries and hazardous materials, the supplier must provide Safety Data Sheets and HCS labels in accordance with OSHA and Federal Standard No. 313-E. Additionally, the items have a non-extendable shelf life of 12 months.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
CAP, LENS
Solicitation # SPE7L3-26-T-273G
The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 160 lens caps under NSN 5855015846138. This combined solicitation, identified as SPE7L326T273G, requires delivery to DLA Distribution within 11 days after receipt of the order. Approved sources for this item include 81395 8398603-2 and N0013 8398601-2. All responsible sources may submit electronic quotes by the deadline of October 5, 2026. The procurement falls under NAICS code 334511 and is managed by the office located in Columbus, Ohio. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically via the provided procurement links.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
SHEET, SPLINT, ORTHOPEDI
Solicitation # SPE2DS-26-T-464L
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR, POSITION
Solicitation # SPE4A5-26-T-467S
Solicitation SPE4A5-26-T-467S is a request for quotations issued by DLA Aviation for the procurement of five position indicators, identified by NSN 6610-01-614-6477. This is a source-controlled item that must be manufactured and tested according to cited limited rights data. The procurement is set aside for Women-Owned Small Businesses (WOSB) and requires certification by the Small Business Administration. The need ship date is March 21, 2027, with an original required delivery date of October 15, 2027, and delivery is specified as FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Inspection and acceptance will occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-129 and RP001, with specific requirements for hazardous material labeling under the Hazard Communication Standard. Invoicing and payment must be processed electronically through the Wide Area Workflow (WAWF) system. All quotations must be submitted via the DIBBS portal by September 30, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
LEVEL, FIRE CONTROL INS
Solicitation # SPE7M1-26-U-6882
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
DIBBS
SUTURE, ABSORBABLE, SURG
Solicitation # SPE2DS-26-T-461M
Solicitation SPE2DS-26-T-461M is a request for quotations issued by the DLA Troop Support Medical Supply Chain for absorbable surgical sutures. The specific item is a coated Vicryl polyglactin 910 plastic glycolide lactide copolymer, size 0, 36 inches in length, with a CTX needle type, supplied in boxes of 36 units. The requirement is for one box to be delivered to the Kelly CSDC AFMEDCOM in San Antonio, Texas, with a required delivery date of September 23, 2026. Bidders must specify the source and part number being supplied and are encouraged to provide quantity ranges. The item is classified as a Type I (Code S) product with a non-extendable shelf life of 60 months. Packaging must be commercial and adhere to DLA Packaging Requirements for Procurement, with marking following Medical Marking Standard No. 1. Inspection and acceptance will occur at the destination. The solicitation incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Quotes must be submitted via the DIBBS system by September 28, 2026, and payment will be processed electronically through the Wide Area WorkFlow system.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

NAICS: 541511
New
Federal
Positioner Control Software and Interface IntegrationThis subcontract for the Department of Defense at NSWC Carderock focuses on the integration of communication interfaces and the development of controlling software for prime contractors. The scope of work includes configuring communication wiring for Ethernet, RS232, RS422, and RS485, as well as creating OEM controlling software and serial data transmission protocols to manage positioner movement and feedback. The primary objective is to ensure seamless integration between motorized control and communication interfaces, resulting in the delivery of operational control software and fully configured interfaces. The opportunity is designated as a Total Small Business Set Aside under NAICS code 541511. It was posted on September 21, 2026, with a response deadline of October 21, 2026. Performance will take place in the 20817 zip code area.
Custom Computer Programming Services

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 333999
New
Federal
Motorized Precision Pan-Tilt Positioner SupplyThis subcontract opportunity with the Department of Defense for NSWC Carderock involves the manufacture and supply of a motorized precision pan-tilt positioner. The required hardware must support a payload of at least 40 lbs while weighing no more than 40 lbs, featuring an IP67 rating for water and dust protection in temperatures as low as -10C. Technical specifications require continuous 360 degree azimuthal pan and 0 to 90 degree elevation tilt, with movement speeds of at least 0.1 degrees per second and position feedback resolution of 0.1 degrees or less. The project is designated as a total Small Business Set Aside under NAICS code 333999. Interested parties must submit their responses by October 21, 2026, for performance in the 20817 zip code area. The final deliverable is a fully functional, IP67-rated positioner designed for use by prime contractors on NSWC Carderock Division projects.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336611
New
Federal
Request for Proposal
Solicitation # N0016726R1004
Solicitation N0016726R1004 is a total small business set-aside request for proposal issued by the Naval Surface Warfare Center Carderock Division for the manufacture of nickel aluminum bronze device piece parts for U.S. Navy submarine propulsors. The contract is structured as an Indefinite Delivery Indefinite Quantity (IDIQ) agreement utilizing both Firm Fixed Price and Cost Plus Fixed Fee pricing arrangements. The scope includes the fabrication, machining, and delivery of various components such as S1L and R4L tops, bottoms, bodies, and masses, as well as shim ring sets. Deliveries are scheduled across a five-year period, with specific timelines based on order volume ranging from 90 to 270 days. Performance is primarily directed to facilities in Bethesda, Maryland, and Kittery, Maine. The award will be determined through a best-value tradeoff process, prioritizing technical capabilities, experience, and management plans as the most important factor, followed by past performance and cost. Offerors must demonstrate a quality system compliant with ISO 9001:2015 or later and adhere to strict packaging and marking standards, including MIL-STD-130 and MIL-STD-129. The solicitation includes a stepped pricing structure based on quantity tiers and requires the reporting of any organizational or personal conflicts of interest. Proposals must be submitted via DoD SAFE, with the final response deadline extended to October 2, 2026.
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
Federal
Acoustic Testing for the IM-272A/WDQ Air Particle Detector and isolation valves
Solicitation # N0016726Q1166
The Naval Surface Warfare Center Carderock Division (NSWCCD) is soliciting quotes for a firm-fixed-price contract to provide acoustic, electromagnetic compatibility (EMC), and electrical interface testing for IM-272A/WDQ Air Particle Detector (APD) units, isolation valves, and controllers. This procurement is a small business set-aside under NAICS code 541330. The primary requirement involves implementing acoustic dampening measures on two APD units to reduce their sound profile without affecting form, fit, or function, followed by airborne and structure-borne noise testing and the testing of four pumps. An optional requirement includes first article inspection and testing for EMC and electrical interface compliance. The period of performance for the base requirement is one year from award, with a delivery window from October 1, 2026, to September 30, 2027. Performance will occur at the contractor's facility, and all government furnished property must be returned with dampening tiles installed. Key deliverables include detailed test reports per CDRL A001 and monthly government furnished equipment status reports per CDRL B001. Award will be based on the Lowest Price Technically Acceptable (LPTA) quotation, provided the offeror is rated acceptable regarding technical capability and conforms to the Performance Work Statement. All testing must adhere to specific military standards, including MIL-STD-740 and MIL-STD-461, and the contractor must follow strict packaging and marking requirements per MIL-PRF-23199.
Engineering Services

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 541511
New
Federal
CMPro Application and Technical Support SpecialistThis subcontract for the Department of Defense at NSWC Carderock involves providing technical support and application-level maintenance for prime contractors on NAVSEA projects. The scope of work focuses on the RCAMS database architecture, specifically delivering Bronze level product support, application service support, and the development of custom forms and screens. Success is measured by the delivery of resolved technical support tickets and updated custom forms. The contract falls under NAICS code 541511 and mandates strict adherence to security standards for protecting Controlled Unclassified Information, specifically requiring compliance with NIST SP 800-171 and DFARS 252.204-7019. The opportunity was posted on September 16, 2026, with a response deadline of September 23, 2026.
Custom Computer Programming Services

POSTED

7 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 513210
New
Federal
CMPro Software License and Maintenance ProviderThis subcontract opportunity with the Department of Defense, specifically NSWC Carderock, seeks a provider to supply and maintain proprietary CMPro software licenses for prime contractors on NAVSEA projects. The primary objective is to support the maintenance of the RCAMS database through the delivery of active software licenses and the provision of CMPro Standard Product Maintenance, which includes all necessary software updates and patches across both base and option years. Eligible candidates must be an Original Equipment Manufacturer or an authorized reseller of CMPro software. The contract falls under NAICS code 513210, with a response deadline of September 23, 2026.
Software Publishers

POSTED

7 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 513210
New
Federal
CMPro Software and Support
Solicitation # N0016726Q1161
The Naval Surface Warfare Center Carderock Division (NSWCCD) is seeking to acquire CMPro software licenses and continuing support services under solicitation N0016726Q1161. This requirement is intended to be awarded as a firm fixed-price purchase order to Professional System Associates, Inc. (PSA) on a sole-source basis, as PSA is identified as the only source of the required material with no compatible alternatives on the market. The software is critical for the NAVSEA RCAMS database to track thousands of records for radiation detection instruments, dosimeters, and related equipment across multiple field activities and calibration laboratories. The scope of work includes standard product maintenance, bronze level product support, application service support, and custom form and screen support. The contract structure consists of a base year and four option years, with a requested delivery date of September 30, 2026. Performance and inspection will take place at the NSWC Carderock Division in Bethesda, Maryland. The procurement falls under NAICS code 513210 and will be managed using Simplified Acquisition Procedures. While intended as a sole-source award, the government allowed interested parties to submit capabilities statements by September 23, 2026, to determine if a competitive procurement is warranted. Award will be based on the lowest evaluated price among technically acceptable quotations, with the government reserving the right to consider past performance via the Supplier Performance Risk System.
Software Publishers

POSTED

7 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 813319
Federal
Dynamic Balancing and Final Inspection ServicesThis subcontract with the Department of Defense, specifically NSWC Carderock, involves providing dynamic balancing and final inspection services for assembled tailcones used in NAVSEA and NSWCCD submarine propulsor projects. The selected provider will be responsible for executing static and dynamic balancing and dimensional verification utilizing CMM metrology tools and dynamic balancing machines. To qualify, the contractor must maintain ISO 9001:2008 or AS9100 certification and possess the necessary security clearance as specified by DD 254. The primary deliverables for this engagement include detailed balancing reports and the Final Certification Package, identified as CDRL A001.
Other Social Advocacy Organizations

POSTED

12 days ago

DEADLINE

in about 2 months
View Details
NAICS: 326199
Federal
Syntactic Foam ManufacturingThis subcontract for the Department of Defense, specifically through NSWC Carderock, involves the manufacturing of syntactic foam components for Tailcone Kits used in NAVSEA and NSWCCD submarine propulsor projects. The selected provider will be responsible for the specialized mixing and molding of syntactic foam to ensure all buoyancy and structural requirements are met using high-pressure molding equipment and mixing systems. To qualify for this opportunity, contractors must maintain ISO 9001:2008 or AS9100 certification and possess the necessary security clearance as specified by DD 254. The contract falls under NAICS code 326199, with a response deadline of November 11, 2026.
All Other Plastics Product Manufacturing

POSTED

12 days ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
Federal
Composite Material ManufacturingThis subcontract for the Department of Defense, specifically NSWC Carderock, involves the manufacture of composite material components for Tailcone Kits used in NAVSEA and NSWCCD submarine propulsor projects. The selected provider will be responsible for the full production cycle, including composite layup, curing, and shaping processes utilizing vacuum bagging systems, composite molds, and autoclaves to deliver finished components. To qualify for this opportunity, contractors must maintain ISO 9001:2008 or AS9100 certification and possess the necessary security clearance as specified by DD 254. The project falls under NAICS code 336413, with a response deadline set for November 11, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

12 days ago

DEADLINE

in about 2 months
View Details
NAICS: 332710
Federal
Precision Machining and Component FabricationThis subcontract for Precision Machining and Component Fabrication supports NAVSEA and NSWCCD submarine propulsor projects through the production of Tailcone Kit sub-components. The scope of work involves high-precision CNC machining using mills and lathes, requiring the contractor to define cutter geometries, speeds, feeds, and finish machining cusp heights to ensure all metal components conform strictly to technical drawings. The project is managed under the Department of Defense via NSWC Carderock and falls under NAICS code 332710. To be eligible, contractors must maintain ISO 9001:2008 or AS9100 certification and possess the necessary security clearances as specified by DD 254. The response deadline for this opportunity is November 11, 2026.
Machine Shops

POSTED

12 days ago

DEADLINE

in about 2 months
View Details
NAICS: 484220
Federal
Secure Logistics and Inter-Facility TransportThis subcontract for Secure Logistics and Inter-Facility Transport, posted by the Department of Defense for NSWC Carderock, involves the secure transport of components between manufacturing and inspection facilities for NAVSEA and NSWCCD submarine propulsor projects. The contractor is responsible for the safe delivery of components using specialized crating and secure transport vehicles, ensuring the proper handling of classified and CUI hardware in accordance with specific packaging requirements. Compliance with DD Form 254 and DFARS 252.204-7012 is mandatory for this engagement. The opportunity falls under NAICS code 484220, with a response deadline of November 11, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

12 days ago

DEADLINE

in about 2 months
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS