Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

SPACER AND PIN ASSE

Awarded

SPE4A5-26-T-013ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of 15 units of a Spacer and Pin Assembly, identified by the NSN/Part Number 4320-00-323-8869, with delivery scheduled within 171 days after the award date. The solicitation number is SPE4A5-26-T-013Z, and it is issued by the Department of Defense, specifically through the ASC Supplier OEM Division, with the place of performance being San Diego, CA. This acquisition follows the applicable Defense Logistics Agency (DLA) packaging, technical, and quality requirements as detailed in the DLA Master List, ensuring compliance with the latest revision in effect at the time of solicitation or award. Quality assurance and inspection processes for the contract adhere to established military standards, including MIL-STD-1916 and ASQ H1331, employing zero-based sampling plans with attributes categorized as critical, major, or minor, and corresponding acceptable quality levels. The contract also requires specific documentation for source approval requests, measurement, and test equipment to verify compliance. Government identification removal procedures apply to any non-accepted supplies. The solicitation is a simplified acquisition governed under NAICS code 333914, and the full terms, conditions, and pertinent updates are accessible through the DLA eProcurement website.

General Info

Procurement of 15 Spacer and Pin Assemblies, delivered in 171 days, meeting DLA military standards.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$5,430

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

NY, USA

Set-Aside

NONE

Awardee

AVIARMS SUPPORT CORP

Award Issued Date

05/28/2026, 12:00:00 AM UTC

Documents

2

SPE4A526P4746.pdf

SPE4A5-26-T-013Z.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMar 19

Solicitation

AwardedMay 28

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE4A526P4746 posted on DIBBS. Awardee: AVIARMS SUPPORT CORP (CAGE 58985) Total Contract Price: $5,430.00 Award Date: 05-28-2026 Solicitation: SPE4A5-26-T-013Z Line items: - SPACER AND PIN ASSE (NSN/Part 4320003238869, PR 7015992704)

Similar Contracts

Same NAICS industry code

43--PUMP UNIT,CENTRIFUG, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RTB38

Solicitation N00104-26-R-TB38 is a firm-fixed-price request for the repair of a centrifugal pump unit (NIIN 001349411) for the Navsup Weapon Systems Support Mech in Mechanicsburg, Pennsylvania. The repaired unit must meet the operational and functional requirements associated with Cage Code GEXU3 and reference number 699D7672. All work must be performed according to the contractor's standard repair and overhaul practices, and any changes in design, material, or part numbers require written approval from the contracting officer, except for simple part number changes. The contractor is also required to perform Commercial Asset Visibility Repairables Portal reporting and maintain inspection records for 365 days following final delivery. The government intends to make a single award based on the most advantageous offer, explicitly weighing past performance as more important than price. Past performance is evaluated using the DoD Supplier Performance Risk System, focusing on item, price, and supplier risk. Technical requirements include strict adherence to MIL-STD-2073-1 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for unique item identification. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation has undergone multiple amendments to extend the response deadline and update cybersecurity clauses, specifically regarding the safeguarding of covered defense information and cyber incident reporting.

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 1 month

43--PUMP/MOTOR ASSY

Solicitation # N0010423RCD46

This unrestricted solicitation, issued by NAVSUP Weapon Systems Support Mech, seeks offers for the manufacture and delivery of a Pump/Motor Assembly (NIIN 016569180). The required hardware must adhere to the design represented by Cage Code 63857, reference number 998F3472, and comply with MIL-STD-130 for physical identification. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance will utilize the Supplier Performance Risk System to assess item, price, and supplier risks. The contract mandates strict quality assurance and packaging standards, requiring compliance with MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Inspection and final acceptance are conducted at the contractor's location, and the contractor must maintain inspection records for 365 days following final delivery. Administrative requirements include the use of Wide Area Workflow for electronic invoicing and receiving reports. Additionally, the contractor must comply with cybersecurity standards for safeguarding covered defense information per DFARS 252.204-7012 and provide Material Safety Data Sheets for any hazardous materials delivered.

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 1 month

PUMP,CENTRIFUGAL

Solicitation # N0010426QTB34

This contract pertains to the repair of a centrifugal pump under a fixed-price arrangement, with a mandatory Repair Turnaround Time (RTAT) of 285 days measured from the physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility (CAV) system. All repairs must comply with manufacturer specifications, technical orders, and applicable military standards including MIL-STD-130 for marking and MIL-STD-2073 for packaging. The Government requires inspection and acceptance of all repaired units, and reserves the right to perform its own inspections at any time. Contractors must be authorized distributors of the original manufacturer and must provide proof of authorization with their quote. Delivery is FOB Origin, and freight is managed by the Navy per CAV procedures. The award is bilateral and requires written contractor acceptance before execution. The contract includes critical compliance requirements such as cybersecurity maturity certification, mandatory use of Workflow Pro (WFP) Mod Assist, and adherence to the Navy’s contractor purchasing system administration deviation. Price reductions will be applied per unit per month for any unexcused delays beyond the RTAT, up to a specified maximum, without limiting other remedies including termination for default. Contractors must provide the unit and total quote price, RTAT, and compare the repair cost to the price of a new unit. All records must be maintained for 365 days after final delivery. Documentation must be obtained from authorized sources, and any design, material, or part number changes require prior written approval from the Contracting Officer using designated code classifications. The contract also enforces strict handling of controlled technical data in accordance with OPNAVINST 5510.1, with distribution restrictions clearly defined. All responses must be submitted by the deadline, and the solicitation is limited to authorized distributors only.

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

PUMP UNIT,CENTRIFUG

Solicitation # N0010427QLA14

Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

Supply of Fuel and Oil Servicing NozzlesThis subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of nine commercial off-the-shelf fuel and oil servicing nozzles. The equipment must adhere to NSN 4930-01-458-5914 and the DLA Master List of Technical and Quality Requirements, with final delivery to New Cumberland, Pennsylvania. Packaging must be completed in accordance with RP001 and MIL-STD-129 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333914. To be eligible, contractors must provide a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. Responses are due by November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

Supply of Pump Shaft Sleeve (NSN 4320015905974)This subcontract involves the procurement or manufacture of one Pump Shaft Sleeve, part number 5108C1 from SIMS PUMP VALVE CO, INC, matching the specifications for NSN 4320015905974. The contract is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain and is intended for prime contractors delivering DLA supply contracts. The item must be delivered to the designated government location in New Cumberland, Pennsylvania. To be eligible, contractors must maintain active SAM validation and strictly adhere to DLA Packaging Requirements RP001 for both procurement and delivery. The opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026, falling under NAICS code 333914.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Reciprocating Pump Repair Kit SupplierThis subcontract opportunity is for a supplier to provide two complete reciprocating pump repair kits, identified by NSN 4320016137062, to prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The selected provider must manufacture or source kits that strictly adhere to the DLA Master List technical and quality requirements and must comply with the Buy American Act. Required documentation for the delivery includes the brand, manufacturer, model, and part number. The contract is categorized under NAICS code 333914 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-0931

Solicitation SPE7M1-27-T-0931, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for two rotary pumps under NSN 4320014337891. The requirement specifies compatible part numbers from Hyster-Yale Group, Inc. (P/N 4249723) and Concentric Rockford Inc (P/N 1800116). The items are to be delivered FOB Destination to the USNS Cesar Chavez T-AKE 14, located at FPO AP 96662, with an original required delivery date of July 24, 2026, and a delivery lead time of 20 days. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 guidelines. Special material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, and hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and NIST SP 800-171 cybersecurity assessment requirements. Quotes must be submitted via the DIBBS portal.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE4A5-27-T-2005

Solicitation SPE4A5-27-T-2005 is for the procurement of 20 spring loaded shaft seal assemblies, identified by NSN 4320-01-304-8042 and Honeywell International part number 1599711-1. The contract is issued by the DLA Weapons Support ASC Supplier OEM Division with a required delivery date of November 19, 2027, and a delivery lead time of 379 days. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot at Hill AFB, Utah. The contractor must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements, CMMC Level 2 Self-Assessment, and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951 and RP001 for palletization. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic preferences, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-27-T-1663

Solicitation SPE7M1-27-T-1663, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for five pump shaft sleeves, specifically part number 5108C from Sims Pump Valve Co, Inc, under NSN 4320015905965. The required delivery date is February 7, 2027, with a delivery timeline of 89 days after order. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. Additionally, the contractor must comply with cybersecurity reporting via DFARS 252.204-7012 and various hazardous material labeling standards. All quotations must be submitted through the DLA Internet Bid Board System by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8E9-27-T-0277

Solicitation SPE8E9-27-T-0277 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of nine fuel and oil servicing nozzles (NSN 4930-01-458-5914). The requirement is designated as a total small business set-aside under NAICS code 333914, with a delivery lead time of 125 days and a required delivery date of January 24, 2027. Performance is set for New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 for marking. Technical and quality standards are governed by the DLA Master List, and the items are identified as Commercial Off The Shelf (COTS) requiring a CMMC Level 2 self-assessment. Environmental and safety restrictions are significant, including a prohibition on the intentional addition of mercury and compliance with the Hazard Communication Standard for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Award evaluation may include a HUBZone price preference, and offerors must comply with the Buy American Act and Berry Amendment regarding domestic material sourcing.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

PUMP, CENTRIFUGAL

Solicitation # SPE7M1-27-T-1691

Solicitation SPE7M1-27-T-1691 is a request for quotations for the procurement of eight centrifugal pumps, identified by NSN 4320123255215. Issued by the DLA Weapons Support Maritime Supply Chain, this requirement is designated as a HUBZone set-aside and is being processed under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is January 4, 2028, with a need ship date of April 20, 2027, and a delivery lead time of 161 days after the order is placed. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130 for Item Unique Identification. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit their quotations via DIBBS by November 9, 2026, and must ensure all representations and certifications are updated in the System for Award Management.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

PUMP, FUEL, METERING

Solicitation # SPE7LX26FAPJM

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, METERING

Solicitation # SPE7LX-21-R-0074

Defense Logistics Agency

POSTED

DEADLINE

PUMP UNIT, CENTRIFUG

Solicitation # SPE7M1-26-T-108W

MARITIME SUPPLY CHAIN

POSTED

CLOSED

Solicitation # SPE7M1-26-T-7776

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, METERING

Solicitation # SPE7LX26FAPCB

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, METERING

Solicitation # SPE7LX26FAPKD

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPRMM126QME82

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

MOTOR,HYDRAULIC

Solicitation # SPRMM126QKF27

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

HOUSING,LIQUID PUMP

Solicitation # N0010426QLB95

Navsup Weapon Systems Support Mech

POSTED

CLOSED

49--GLBA REPLACE FUEL DISPENSERS

Solicitation # 140P9726Q0033

Alaska Regional OFFICE(97000)

POSTED

CLOSED

MOTOR,HYDRAULIC

Solicitation # SPRMM126QKE95

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

F550 Skid Attack Pac

Solicitation # W911S226U3333

W6QM Micc-Ft Drum

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS