Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPACER, SLEEVE

Active
SPE4A7-26-T-606TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one SPACER, SLEEVE with NSN 5365-01-668-5872, under solicitation SPE4A7-26-T-606T, with a required delivery within 20 days after order. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which must be accessed via the designated DLA web portal. Compliance with MIL-STD-1916 or ASQ H1331 Table 1 is mandated for sampling, with zero non-conformances required in the sample lot unless otherwise specified, and attributes must be classified with verification levels or AQLs as outlined. Physical identification and bare item marking must conform to RQ017, and all packaging must adhere to DLA packaging standards. The item is covered under CMMC Level 2 requirements and contains technical data subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring adherence to DFARS 252.225-7048. Access to controlled technical data is restricted to contractors approved under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire. Government identification must be removed from non-accepted supplies, and cybersecurity maturity is enforced through C3PAO certification. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, and performance is set for Mechanicsburg, PA, under the Department of Defense’s ASC Supplier Oper AE and AF Division.

General Info

Procure one SPACER, SLEEVE per NSN 5365-01-668-5872 with CMMC Level 2, ITAR/EAR controls, and zero defect sampling under DLA standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

5450 CARLISLE PK BLDG 209N, MECHANICSBURG, PA, 17050-2411, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-606T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
RICHARD ELLERY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,SLEEVE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-01-668-5872 Quantity: 1 EA Purchase Request: 7017673421QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606X
The contract is for one unit of a SPACER, SLEEVE with NSN 5365-01-701-2568, under solicitation SPE4A7-26-T-606X, with a delivery requirement of 20 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific mandates for physical identification and bare item marking. Compliance with MIL-STD-1916 or comparable zero-based sampling plans is required, with attributes classified as critical, major, or minor tied to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. The contractor must adhere to DLA packaging standards and remove government identification from non-accepted supplies. The product is associated with covered defense information and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including domestic-based foreign nationals, and requiring strict compliance with DFARS 252.225-7048. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance located in Mechanicsburg, Pennsylvania, and inquiries directed to Renee Bynum.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606S
The item specified is a SPACER, SLEEVE with NSN 5365-01-668-5878, quantity of one unit, to be delivered within 20 days after order placement under purchase request 7017673422. The contract solicitation number is SPE4A7-26-T-606S, issued on August 3, 2026, with responses due by August 11, 2026. This procurement falls under NAICS code 332119 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance located in Mechanicsburg, Pennsylvania, 17050-2411. The technical specifications referenced are drawn from the DLA Master List of Technical and Quality Requirements, incorporating requirements identified by R and I numbers. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, and the supplier must be a certified C3PAO. The procurement includes strict compliance with DLA packaging standards and mandates the removal of government identification from non-accepted supplies. The supplied technical data is classified as export-controlled under either ITAR or EAR, and its dissemination to foreign persons, including non-U.S. citizens within the United States, is prohibited without explicit authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is required, and only contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA export-controlled data questionnaire, are permitted to access or handle this data. The contracting officer for this solicitation is Grayson Andrews, reachable via email at grayson.andrews@dla.mil. All parties must adhere to these stringent safeguards to ensure national security compliance throughout the supply chain.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11JS
The contract is for a single retaining ring with NSN/Part Number 5325-01-673-6024, to be delivered within 20 days of award, under solicitation number SPE4A6-26-T-11JS issued by the Defense Logistics Agency’s ASC Commodities Division. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The item must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Acceptance criteria require zero non-conformances unless otherwise stated, and manufacturers may choose attribute or variable inspection methods. Item Unique Identification is not required. The technical data associated with this item is subject to export controls under either ITAR or EAR, and its disclosure to foreign persons—whether inside or outside the United States—is prohibited without prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and foreign subsidiaries of U.S. companies, and DFARS 252.225-7048 applies. Access to this controlled data is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export-controlled technical data training, and have been formally approved by the DLA authority. The place of performance is Mechanicsburg, Pennsylvania, with Monica Clark as the primary point of contact. The contract falls under NAICS code 332119 and is issued as a federal solicitation with no set-aside classification.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11KC
The contract is for one retaining ring identified by NSN 5325-01-671-2709, with a delivery requirement of 20 days after order placement. It is issued under solicitation SPE4A6-26-T-11KC by the Defense Logistics Agency's ASC Commodities Division, with a response deadline of August 11, 2026. Technical and quality requirements are incorporated via references to the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or another approved zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, while unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless the contract states otherwise, with manufacturers permitted to choose attribute or variable inspection methods under MIL-STD-1916. Technical data associated with this item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign national employees. Access is restricted to contractors possessing a valid US/Canada Joint Certification Program certification, who have completed required DLA training and questionnaire, and have received formal approval from DLA for access. The place of performance is Mechanicstown, PA 17050-2411, and primary point of contact is Sommer Yates at DLA.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-607D
The contract pertains to the procurement of one spacer sleeve with NSN 5365-01-714-2913 under solicitation SPE4A7-26-T-607D, with a delivery requirement of 20 days after order placement. The item is subject to stringent quality and cybersecurity standards, including compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 for third-party assessors and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Packaging must meet DLA procurement standards, and all non-accepted supplies must have government identification removed prior to return. Inspection and acceptance occur at the manufacturer’s origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise stipulated. Attributes are classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. The technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, successful completion of DLA export control training, and authorization from the DLA controlling authority. DFARS 252.225-7048 governs protection of this controlled technical data, which includes restrictions on disclosure to foreign persons regardless of location. The procurement is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance located in Mechanicsburg, Pennsylvania, and inquiries directed to Soni Randolph at the provided contact details.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, NONMETALLIC
Solicitation # SPE4A7-26-T-606V
The contract is for a nonmetallic bushing with NSN 5365-01-684-4943, quantity one unit, under solicitation SPE4A7-26-T-606V, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of award, with a response deadline of August 11, 2026. The item is subject to multiple technical and quality requirements incorporated from the DLA Master List, including packaging, identification, and export control mandates. Technical data associated with this item is controlled under ITAR or EAR, restricting its disclosure to foreign persons, even within the United States, and mandates compliance with DFARS 252.225-7048. Access to export-controlled data is limited to contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and formal DLA authorization. The place of performance is Mechanicsburg, Pennsylvania, with Michael Johnson as the primary point of contact. The solicitation also requires CMMC Level 2 certification for any third-party assessment organizations involved and mandates removal of government identification from non-accepted supplies.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-607C
The item is a spacer sleeve identified by NSN 5365-01-702-9009 with a quantity of one unit, procured under solicitation SPE4A7-26-T-607C, which was posted on August 3, 2026, and has a response deadline of August 11, 2026. Delivery is required within 20 days after award. The technical requirements for this item include an exception to federal specifications, permitting accelerated life testing at 105% of the rated voltage plus or minus half a percent as an acceptable alternative to testing at the specified voltage. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition type. The item is subject to export control regulations under either ITAR or EAR, and its technical data may not be disclosed to foreign persons without prior authorization from the Department of State or Commerce; DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaire and been formally authorized by DLA. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. The place of performance is Mechanicsburg, Pennsylvania, 17050-2411, and the responsible point of contact is Tamera Greene of the Department of Defense, ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606W
The item is a spacer sleeve identified by NSN 5365-01-681-4882, with a quantity of one unit, under purchase request 7017673423, requiring delivery within 20 days after delivery order issuance. The solicitation is issued under contract number SPE4A7-26-T-606W, with a response deadline of August 11, 2026, and is classified under NAICS code 332119. It is subject to stringent technical and quality requirements referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements. The item is governed by DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, and inspection and acceptance at the origin. Government identification must be removed from rejected supplies, and physical identification or bare item marking is required. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit approval from DLA. The delivery location is Mechanicsburg, Pennsylvania, with primary point of contact James Sinks at james.sinks@dla.mil. The contract is subject to CMMC Level 2 certification requirements for third-party assessment organizations performing any related assessments.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606N
The contract is for one spacer sleeve with NSN 5365-01-668-5816 and part number 801-8617176, issued under solicitation SPE4A7-26-T-606N by the Department of Defense through DLA. The item must conform to technical and quality requirements referenced by R and I numbers from the DLA Master List, with specifications drawn from TDP Rev A Gen 1 based on drawing numbers 53711 8617176 and 53711 8617176-32-1. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes are classified with specified verification levels or AQLs. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as prescribed. The item is to be shipped FOB origin within 20 days of contract award to the delivery address in Mechanicsburg, PA, using traceable freight methods only—parcel post is prohibited. The quantity is fixed at one unit with no variance allowed. Acceptance and inspection occur at the destination point, and the required delivery date is July 28, 2026. All documentation and compliance are governed by DLA standards, and unit of issue is EA. Contract administration details include a primary point of contact, Hannah Leonard, and official tracking references for government use.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606P
The contract is for a single SPACER, SLEEVE with NSN 5365-01-720-6804, requiring delivery within 20 days after order, under purchase request 7017673427. The solicitation number is SPE4A7-26-T-606P, issued on August 3, 2026, with responses due by August 11, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to export control regulations under ITAR or EAR, and any disclosure of related technical data to foreign persons, including foreign nationals in the U.S., requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program certification, completed DOD export-control training, and DLA authorization may access the technical data. Packaging must comply with DLA requirements, non-accepted supplies must have government identification removed, and the item must be physically marked per RQ017. The place of performance is Mechanicsburg, Pennsylvania, 17050-2411, and the primary point of contact is Channon Dillard at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
Precision Machined Spacer Sleeve ManufacturingThe contract requires the manufacture of 62 precision-machined spacer sleeves identified by NSN 5365-01-725-9383, fully compliant with Department of Defense technical and quality standards, including adherence to MIL-STD specifications and the DLA Master List. The work must meet stringent manufacturing and inspection requirements to ensure compatibility and reliability in military applications. The place of performance is designated as Port Hueneme, CA, with a zip code of 93043, and the contract is classified under NAICS code 332119 for other fabricated metal product manufacturing. The solicitation, issued under the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and was posted on August 2, 2026, with a firm response deadline of August 10, 2026. All submissions must align with the procedural and technical expectations outlined in the DLA procurement system, and bids must be submitted through the provided DIBBS portal before the stated deadline.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-605C
The contract specifies the procurement of a spacer sleeve identified by NSN 5365-01-721-8998 and part number 92510A236, with a quantity of 14 units to be delivered within 10 days FOB origin. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the product is source-controlled, meaning it must be manufactured and tested using limited rights data accessible only to approved vendors with traceability to authorized sources. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical, major, and minor attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with zero non-conformances mandated unless otherwise stated. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. The item must be palletized according to DLA packaging guidelines and shipped to the delivery address at US Army SSA Powidz AB in Poland. The contract prohibits government provision of proprietary technical data and requires vendors to demonstrate access to approved manufacturing sources. Delivery is subject to zero variance, inspection and acceptance occur at the destination, and transportation rules follow DLA procedural notes. The solicitation expires August 10, 2026, with an original required delivery date of July 31, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging, Labeling, and Kitting Services for DLA DeliveriesThe contract solicits end-to-end packaging, preservation, labeling, and kitting services for aerospace components to be delivered FOB origin in strict compliance with Defense Logistics Agency standards. All work must adhere to DLA’s technical and procedural requirements to ensure components are properly protected, identified, and assembled for military use. The services are classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 561910 designates this as a support services activity within the waste management and remediation sector, though the nature of the work clearly aligns with specialized logistics and supply chain support for defense equipment. The solicitation was posted on August 3, 2026, with a firm response deadline of September 1, 2026, and is managed by the ASC Supplier Operations AE and AF Division under the Department of Defense. While the exact place of performance and agency office details are unspecified, delivery obligation is clearly defined at FOB origin, placing responsibility for logistics planning on the contractor. The contract is accessible through the DIBBS platform, and all prospective offerors are expected to comply with federal acquisition regulations and DLA-specific documentation standards. Participation is restricted to small businesses, making this an opportunity dedicated exclusively to qualified small business entities operating in the defense logistics space.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Cushion (Aircraft Interior Component)The contract mandates the manufacture of ergonomic and durable aircraft seat cushions designed for military use, adhering strictly to Department of Defense packaging and quality standards. The product must meet rigorous performance criteria to ensure soldier safety, comfort, and long-term reliability under extreme operational conditions. All items must be produced in compliance with Federal Acquisition Regulation guidelines and delivered in accordance with DoD-specific packaging protocols to maintain integrity during transport and storage. This is a small business set-aside subcontract under NAICS code 339920, reserved exclusively for small business concerns as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with a deadline for responses set for September 1, 2026. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific performance locations and points of contact are not detailed, the work is intended to support military aircraft interior systems. Interested vendors must submit proposals through the official DIBBS portal prior to the deadline to be considered.
Sporting and Athletic Goods Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Back Cushion (Critical Life Support Component)The contract seeks the manufacture of a critical life support component—an aircraft seat back cushion—designed to meet stringent aviation safety and durability standards for military aircraft. The product must be fire-resistant and engineered for long-term performance under extreme conditions, ensuring crew safety and compliance with military life support requirements. The solicitation is specifically set aside for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring opportunities for qualified small enterprises to compete. The North American Industry Classification System code 339920 categorizes this as the manufacturing of other miscellaneous fabricated metal products, aligning with specialized components for aerospace applications. The proposal must be submitted by September 1, 2026, with the contract awarded under the Department of Defense, specifically by the ASC SUPPLIER OPER AE AND AF DIV. While the physical location of performance is not specified, the component is intended for use in military aircraft systems, requiring adherence to exacting technical and certification benchmarks. The contract is structured as a subcontract, indicating it may be part of a larger supply chain supporting broader defense aviation programs. Participation requires full capability to deliver certified, high-reliability components without compromise to safety, durability, or regulatory compliance, with the DLA’s DIBBS platform serving as the official portal for submission and related documentation.
Sporting and Athletic Goods Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
DIBBS
Manufacture of Aircraft Fairing, Back (FAA PMA or Equivalent)The contract entails the manufacture and delivery of a structural or aerodynamic aircraft back fairing designed for life support systems, requiring strict compliance with military specifications and form-fit-function criteria to ensure seamless integration into existing platforms. The product must meet all technical and performance standards associated with aerospace applications under defense mandates, and the manufacturing process must be validated for consistent quality and reliability in operational environments. This is a small business set-aside subcontract categorized under NAICS code 336412, exclusively available to small businesses as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with responses required by September 1, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS portal for qualified bidders seeking to fulfill this defense-related procurement.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: NA
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesThe contract opportunity titled "Unable to Retrieve Subcontract Opportunities" was posted on August 3, 2026, with a response deadline set for September 2, 2026. It is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, as defined by the Small Business Administration and FAR 19.5. The solicitation number SPE4A726R0674 is associated with this opportunity, which is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. However, critical details including the NAICS code, place of performance, point of contact, and the prime contract context are unavailable due to a system timeout. The location, agency office address, and specific performance requirements cannot be determined from the provided data, and no further decomposition or subcontracting structure can be identified at this time. Interested parties are directed to the provided UI link for potential updates or additional information.

POSTED

about 7 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A7-26-T-607H
This contract is for the procurement of 12 plain studs with NSN 5307-01-457-2738 and part number 399-84-1022, supplied by Buffalo Pumps Inc and Air & Liquid Systems Corporation, both under DLA supplier code 83130. The items are classified as critical application components and must be delivered FOB origin within 173 days of the contract award, with no variance allowed in quantity. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly follow MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must comply with MIL-STD-129 without special markings. Mercury or mercury-containing compounds are strictly prohibited in any part of the product, its packaging, preservation, or labeling, except for specific functional uses such as batteries, fluorescent lamps, sensors, and instruments defined by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. All documentation, unit of issue, and transportation details are governed by DLA procedures and referenced directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CAP, LENS
Solicitation # SPE4A7-26-T-606R
The contract pertains to the procurement of a single unit of a CAP, LENS with NSN 5855-01-666-9264 under solicitation SPE4A7-26-T-606R, requiring delivery within 10 days of award with FOB origin terms and no variance in quantity. All items must comply with DLA’s packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including the specified packaging code U and absence of special marking. Sampling and inspection protocols mandate zero non-conformances per MIL-STD-1916 or ASQ H1331 unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Configuration change management and deviation requests are governed by RQ002 and RQ011, while government identification must be removed from non-accepted supplies. Delivery must be shipped via traceable freight to the designated distribution office at Camp Lejeune, NC, explicitly prohibiting parcel post. The item is required for military use, with a specified original delivery date of July 28, 2026, and all technical and quality requirements are governed by the DLA Master List referenced in RA001. The contract is subject to DoD unit of issue standards and requires compliance with all applicable engineering change procedures and quality assurance provisions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, AIRCRAFT SAFET
Solicitation # SPE4A7-26-Q-0957
The contract specifies the procurement of a single aircraft safety shoulder harness with NSN 1680-00-555-2938 under purchase request 7017272193 for a quantity of 273 units, with delivery required within 497 days after award. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA-specific requirements, and all items must undergo inspection and acceptance at the point of origin. Non-accepted supplies must have all government identification removed, and each item must be physically marked in accordance with bare item marking standards. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled technical data, and formal DLA authorization may access such data. The solicitation number is SPE4A7-26-Q-0957, issued on August 3, 2026, with responses due by August 22, 2026, managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Grayson Andrews as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 19 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A7-26-T-606Q
The contract is for electrical insulation tape, identified by NSN 5970-01-588-5080 and part number 3304920, with a quantity of four units, to be delivered within 20 days to Homestead Air Force Base, Florida. The item is classified as a critical application with a shelf life of 18 months, extendable, and must comply with Type II packaging requirements as specified under RS001. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1 under a zero-based acceptance plan, requiring zero non-conformances in the sampled lot unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major. Inspection and acceptance occur at the manufacturer’s origin, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, including special code 33 for shelf life type. Palletization follows DLA packaging requirements, and shipment must use the fastest traceable method, explicitly prohibiting parcel post. The contract incorporates technical and quality requirements from the DLA Master List, and the supplier is responsible for compliance with all referenced standards including removal of government identification from non-accepted supplies. The total price is set at $4.00 per unit, with no variance allowed in quantity delivery.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-606Z
The contract pertains to the procurement of two support structural components for aircraft, identified by NSN 1560-00-795-8779, under solicitation SPE4A7-26-T-606Z, with a delivery deadline of 151 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards, source approval documentation, and inspection and acceptance procedures conducted at the point of origin. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, whether within the U.S. or abroad, and restricting access to contractors with approved JCP certification, completed DLA training, and formal authorization. Configuration changes require formal Engineering Change Proposal requests for any deviations or waivers. The item does not require Unique Identification per the Service customer’s request, though physical marking and removal of government identification from non-accepted supplies are mandated. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors, and covered defense information is subject to applicable DFARS provisions. Delivery is designated to Tinker AFB, Oklahoma, with primary point of contact provided for procurement inquiries.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details