Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPACER, SLEEVE

Active
SPE4A7-26-T-605CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a spacer sleeve identified by NSN 5365-01-721-8998 and part number 92510A236, with a quantity of 14 units to be delivered within 10 days FOB origin. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the product is source-controlled, meaning it must be manufactured and tested using limited rights data accessible only to approved vendors with traceability to authorized sources. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical, major, and minor attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with zero non-conformances mandated unless otherwise stated. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. The item must be palletized according to DLA packaging guidelines and shipped to the delivery address at US Army SSA Powidz AB in Poland. The contract prohibits government provision of proprietary technical data and requires vendors to demonstrate access to approved manufacturing sources. Delivery is subject to zero variance, inspection and acceptance occur at the destination, and transportation rules follow DLA procedural notes. The solicitation expires August 10, 2026, with an original required delivery date of July 31, 2026.

General Info

14 spacer sleeves, NSN 5365-01-721-8998, FOB origin, deliver to Poland by July 31, 2026, zero defects, strict military standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-605C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
MYKHARA ROBINSON
contact@example.gov

Full Description

Show more
SPACER,SLEEVE
SPACER,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
MCMASTER-CARR SUPPLY CO 39428 P/N 92510A236
TDP Rev A Gen 1 IAW BASIC DRAWING NR 5B5M3 11B4600643 REVISION NR P2 DTD 06/13/2018 PART PIECE NUMBER:
SPE4A7-26-T-605C
SECTION B
PR: 7017656149 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017656149 0001 EA 14.000
NSN/MATERIAL:5365017218998
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W9005D
W6J6 USAREUR-AF SSA OPN SPT
US ARMY SSA POWIDZ AB
8 WITKOWSKA BLDG 28
POWIDZ 62430
PL
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W9005D
W6J6 USAREUR-AF SSA OPN SPT
US ARMY SSA POWIDZ AB
8 WITKOWSKA BLDG 28
POWIDZ 62430
PL
MARKFOR
W9005D
SPE4A7-26-T-605C
SECTION B
PR: 7017656149 PRLI: 0001 CONT’D
W6J6 USAREUR-AF SSA OPN SPT
US ARMY SSA POWIDZ AB
8 WITKOWSKA BLDG 28
POWIDZ 62430
PL
M/F: (TCN) W9005D62091077
RDD: 224
PROJ: 9GU TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/31/2026
SPE4A7-26-T-605C NSN/Part Number: 5365-01-721-8998 Quantity: 14 EA Purchase Request: 7017656149QTY: 14 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606H
The contract specifies the procurement of 62 units of a spacer sleeve with NSN 5365-01-725-9383 under solicitation SPE4A7-26-T-606H, requiring delivery within 20 days FOB origin with no quantity variance allowed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E, including preservative method 31, dry packaging, and unit container type BL, while marking follows MIL-STD-129 with no special marking codes. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 Table 1, enforcing zero non-conformances unless otherwise stated, with attributes assigned verification levels or AQLs as specified. The item must be delivered to the government freight address in Port Hueneme, CA, with parcel post prohibited; shipment must use the fastest traceable means and reference RDD 777. Inspection and acceptance occur at destination, and the item is subject to DLA packaging and identification regulations including removal of government identification from non-accepted supplies. The unit of issue is each, priced at $62.00 per unit, with a total contract value of $3,844, and the original required delivery date is May 19, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-606J
The contract specifies the procurement of two bushing sleeve components, part number 4466265, with NSN 5365-01-680-2432, supplied by OSHKOSH DEFENSE LLC and HIAB USA INC, each at a unit price of $2.00 for a total value of $4.00. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit containers, and packing codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA’s packaging standards, and all items must be shipped to the designated military installation at Kadena Air Base, Okinawa, Japan. The contract references DLA’s Master List of Technical and Quality Requirements for all technical and quality specifications, with sampling governed by MIL-STD-1916 or comparable zero-based plans, and non-conforming items subject to zero acceptance unless otherwise stated. The order is split into two CLINs under solicitation SPE4A7-26-T-606J, with one shipment tied to RDD 555 and a required delivery date of July 1, 2026, and the second to RDD 999 with a required delivery date of July 21, 2026. Transportation logistics are governed by DLAD procedure notes C19 and C20, and all shipments are marked for the same destination with unique shipment identifiers. Technical compliance is strictly enforced through referenced military standards, and the contract includes specific government-use codes, procurement identifiers, and contact information for contract oversight. All documentation must conform to DoD unit of issue requirements, with detailed packaging and identification protocols ensuring traceability and readiness for military use.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-593C
The contract pertains to the procurement of three bushings, sleeve type, identified by NSN 5365-01-629-4845 and part number NAS77A7-038, manufactured in accordance with the basic non-government standard NAS77 Revision 16 dated 12/31/2025. The item is classified as a critical application component, requiring strict adherence to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RQ017 for physical identification, RA001 for incorporated technical specifications, RQ001 for tailored quality requirements, and RQ009 for inspection and acceptance at origin. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified, and unspecified attributes are treated as major with an AQL of 1.0. The contractor must implement a quality system compliant with SAE AS9003 or ISO 9001, and all measuring and test equipment must be properly calibrated under RT001 requirements. Delivery is due within 20 days after award to Fort Campbell, Kentucky, with FOB origin terms meaning title and risk transfer upon delivery at the contractor’s facility. Packaging must conform to MIL-STD-2073-1E with unit pack code U, using a metal open-top box as the unit container and a fiberboard box as the intermediate container, with no preservation materials required beyond cleaning and drying. Marking must adhere to MIL-STD-129, including two-dimensional Data Matrix and linear barcodes, with the NSN, CLIN, and delivery address included, and no special marking is required. The item must be shipped by the fastest traceable means, excluding parcel post, with shipment details linked to RDD 777 and project TP 2. All contract clauses referenced, including FAR 52.216-1, 52.222-50, 52.223-23, 252.232-7010, and 252.240-7997, are applicable with deviations noted, and the contract incorporates numerous DFARS clauses including 252.223-7001 for hazardous material labeling per O
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332119
New
DIBBS
Precision Machined Spacer Sleeve ManufacturingThe contract calls for the manufacture of 4,000 precision spacer sleeves identified by NSN 5365-01-648-5537 and part number 4139616, all produced to strict military specifications. Full material traceability is required, ensuring every component can be tracked from raw material source through final inspection and delivery. Compliance with military packaging and labeling standards is mandatory, with all units to be appropriately documented and secured for military logistics handling. The work is designated as a subcontract under NAICS code 332119, with performance location set in Barstow, California, at ZIP code 92311-5014. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and the award will be managed by the Department of Defense under the Land Supplier Operations Engines division.
LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
Battery Box Manufacturing and SupplyThe contract calls for the manufacture and supply of five Battery Box units identified by NSN 6160-01-528-1678 and part number 32910-001, all to be produced in strict compliance with military specifications. The work is being procured as a subcontract under the Defense Logistics Agency, which operates within the Department of Defense, and the NAICS code 332119 indicates the specialized manufacturing nature of the requirement. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, allowing potential contractors a limited window to submit proposals. The place of performance and point of contact details are unspecified, but the official solicitation link is accessible through the DIBBS system for further procurement information.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE7L5-26-T-4661
The contract pertains to the procurement of 95 units of a spacer sleeve with NSN 5365-01-648-5537 and part number 4139616, under solicitation SPE7L5-26-T-4661, issued by the Department of Defense through DLA. The unit price is $95.00 per unit, with a total contract value of $9,025.00, and delivery is required FOB origin within 247 days from the contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, specifically at DLA Distribution Barstow, Central Receiving Warehouse 7, with the delivery address and shipping instructions clearly designated. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, take full precedence, including mandatory labeling per MIL-STD-129 and palletization per RP001. The unit of issue is each (EA), and the quantity per unit pack (QUP) is specified as 001. The item is designated under NAICS code 332119, with the primary point of contact being Bradley Evans. The original required delivery date is January 23, 2027, though the need ship date is May 5, 2026, indicating potential scheduling flexibility or phased fulfillment. Transportation details follow DLAD Proc Notes C19 and C20, and all materials must be devoid of government identification if not accepted.
LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-602H
The contract pertains to the procurement of one bushing, sleeve with NSN 5365-01-722-0219 under solicitation SPE4A7-26-T-602H, requiring delivery within 20 days FOB origin to a designated military facility in Lincoln, Nebraska. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with compliance enforced per the revision in effect on the solicitation issue date. The item must conform to Drawing No. 19207 12421654 Revision A dated June 11, 2010, with a reference revision date of May 4, 2026. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E with packaging code U, using preservative method 10, and marking must comply with MIL-STD-129 without special marking codes. Palletization follows DLA packaging guidelines, and shipment must use traceable freight methods—parcel post is prohibited. Delivery is to be made to W80266, W8SM NE ARNG FMS 1 in Lincoln, Nebraska, with the original required delivery date set for April 23, 2026. The contract specifies a strict quantity variance of plus 0%, minus 0%, with inspection and acceptance occurring at the destination. The unit of issue is each (EA), and all documentation aligns with Department of Defense standards and authorized procedures.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-601U
The contract pertains to a single shim identified by NSN 5365-01-671-8742, with a delivery requirement of 20 days after award. It is issued under solicitation SPE4A7-26-T-601U, with a response deadline of August 7, 2026, and is classified under NAICS code 332119. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date, depending on acquisition size. The item involves controlled technical data subject to ITAR or EAR export regulations, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to such data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire and received explicit authorization. The packaging must comply with DLA specifications, and non-accepted supplies must have government identification removed. The place of performance is Mechanicsburg, PA, 17050-2411, and the point of contact is Michael Johnson with the Department of Defense, ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-601W
The contract is for the procurement of a single SPACER, RING with NSN 5365016785015, under solicitation SPE4A7-26-T-601W, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The item is to be delivered within 20 days of order placement to the destination in Mechanicsburg, PA, with FOB Origin terms applying, and no quantity variance is permitted. Acceptance and inspection are conducted at the destination by the Government, following sampling requirements based on MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified. Attributes are classified with critical, major, and minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively, with unspecified attributes treated as major. All items must meet technical and quality requirements from the DLA Master List and include bare item marking as specified by RQ017. Packaging must adhere to MIL-STD-2073-1E with cold/dry preservation method (Code 33), dry climate control, and unit packaging in a box (BE), while labeling and marking comply fully with MIL-STD-129 including barcoding and without special marking. Palletization follows DLA’s RP001 packaging requirements, and shipments must be sent by traceable means only—parcel post is prohibited. The contract incorporates multiple FAR and DFARS clauses related to cybersecurity, trafficking in persons, employment eligibility, hazardous materials, export control, and safeguarding of defense information, with specific deviations noted for clauses involving information systems and subcontracting. Payment must be submitted via Wide Area WorkFlow (WAWF), and contractors are required to provide the Unique Entity Identifier (UEI) and comply with all socioeconomic and size status representations. The solicitation closed on August 7, 2026, with an original delivery deadline of June 16, 2026, and historical pricing suggests a contract value of approximately $1,074.92.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
GROMMET, NONMETALLIC
Solicitation # SPE4A6-26-T-10NX
The contract is for a nonmetallic grommet with part number 416T2059-2 and NSN 5325-01-654-3307, specifying a quantity of two units to be delivered within 127 days to Tinker Air Force Base, Oklahoma. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The item is classified as a critical application under Boeing’s specification and must comply with the referenced Quality Assurance Provision 13873 and CDRL FAACERTCOM-25015, Revision D, dated January 14, 2025. Packaging, preservation, and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. FAA bare item marking and airworthiness approval requirements apply, and configuration change management through Engineering Change Proposals must be followed. Sampling must align with MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs consistent with critical, major, and minor classifications. Delivery is FOB origin under a zero variance tolerance, with inspection and acceptance occurring at destination. Packaging and palletization follow DLA’s specific procurement guidelines, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE4A6-26-T-10NX, with a response deadline of August 7, 2026, and requires delivery no later than December 13, 2026.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-604H
This contract pertains to the procurement of a critical application shim part, identified by P/N 06150-09027-101 and NSN 5365017230683, with a total order quantity of 45 units at a unit price of $45.00, resulting in a total contract value of $2,025.00 for this line item, with additional line items bringing the total estimated contract value to $19,149.42. Delivery is required 281 days after order placement, with a firm delivery date of May 16, 2027, and shipments must be delivered FOB origin to the Defense Logistics Agency distribution facility in New Cumberland, Pennsylvania. Packaging must strictly conform to MIL-STD-2073-1E, with preservation method 33 requiring cleaning and drying, and no special preservation materials. Marking must comply with MIL-STD-129, with no special marking codes required, and palletization must adhere to DLA Packaging Requirements for Procurement. Sampling during inspection is governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The contract includes mandatory compliance with hazardous materials regulations under DFARS 252.223-7001 and 252.223-7008, requiring submission of Safety Data Sheets compliant with 29 CFR 1910.1200 and Federal Standard No. 313, and prohibits hexavalent chromium. Radioactive material exceeding thresholds must be pre-notified to the contracting officer with certification of consistency and prior contract references. Cybersecurity and information safeguarding obligations are enforced through clauses such as 252.204-7012 and 52.240-93, with a deviation 2026-00038 applied to multiple clauses including changes, trafficking in persons, and sustainable products. Payment must be processed via Wide Area WorkFlow (W
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332119
New
DIBBS
BATTERY BOX
Solicitation # SPE7L7-26-T-4496
The contract specifies the procurement of five battery boxes with NSN 6160-01-528-1678 and part number 32910-001 from MARATHONNORCO AEROSPACE, INC., under solicitation SPE7L7-26-T-4496. Delivery is required within 20 days FOB origin, with a required delivery date of July 22, 2026, and the items must be shipped to Spangdahlem Air Base, Germany, with both shipping and marking instructions following MIL-STD-129 and MIL-STD-2073-1E packaging standards. The items are to be packed in unit containers marked with code Q at packing level B, using specified cushioning materials and no special marking, with palletization aligned to DLA packaging requirements. Inspection and acceptance occur at destination, with zero defect acceptance criteria mandated under MIL-STD-1916 or comparable zero-based sampling unless otherwise stated, and all attributes not otherwise defined are treated as major with corresponding verification levels. The contract enforces strict compliance with DLA’s master list of technical and quality requirements, including mandatory use of MIL-STD-130N for item identification and adherence to DLA procedural notes for transportation and freight. The purchase unit is each, priced at $5.00 per unit, with no variance allowed in quantity, and the point of contact for the Defense Logistics Agency is Maria Blaney.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A7-26-T-606A
This contract specifies the procurement of five terminal lugs with NSN 5940-01-008-6727 under solicitation SPE4A7-26-T-606A, which is a total small business set-aside with a NAICS code of 335931. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. All items require physical identification or bare part marking in accordance with specified guidelines. Sampling and inspection follow MIL-STD-1916 or an approved zero-based equivalent, with verification levels and AQLs assigned based on attribute criticality unless otherwise stated. Zero non-conformances are required for acceptance unless the contract specifies otherwise. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location. Access is limited to contractors with approved JCP certification, completed DOD training, and formal DLA authorization. DFARS 252.225-7048 applies, and covered defense information is protected under RD003. The contracting office is the Department of Defense, specifically ASC Supplier Operations AE and AF Division, with Jessica Gentry as the primary point of contact.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
PLATE, IMAGING, RADIATIO
Solicitation # SPE4A7-26-T-606M
The contract pertains to the procurement of 10 units of a radiation imaging plate, identified by NSN 6635-01-606-4999, under solicitation SPE4A7-26-T-606M, with a required delivery date of October 18, 2026, and a final delivery window of 170 days. All supplies must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date. Hazardous material restrictions are strictly enforced: mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, sensors, or specified reagents, and any permitted mercury-containing portable lamps or instruments must be shockproof with a secondary containment boundary as defined by NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and DLA Packaging Requirements, with marking adhering to MIL-STD-129 and no special marking required. Sampling and inspection protocols mandate zero non-conformances under MIL-STD-1916 or comparable zero-based plans, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. The item is to be delivered FOB origin to a designated DLA receiving point in Tracy, California, with no quantity variance permitted. The contract enforces full compliance with DLA transportation procedures and requires adherence to standardized unit of issue and packaging codes, with all documentation and marking aligned to federal military and procurement standards.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
BLOCK, CABLE INSERT
Solicitation # SPE4A7-26-T-605X
The contract specifies the procurement of a BLOCK, CABLE INSERT with NSN 5975-01-386-6568 and part number RM120 from ROXTEC INC, with a quantity of 7 units priced at $7.00 each, totaling $49.00. Delivery is required within 229 days of contract award, with FOB origin terms, and inspection and acceptance to occur at the destination. The items must be packaged and labeled in strict accordance with MIL-STD-129, and packaging must comply with either ASTM D3951 for non-hazardous materials or FED-STD-313 and TQ requirement IP025 if hazardous, with all DLA Master List technical and quality requirements taking precedence. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Palletization must meet RP001 packaging standards, and the unit of issue is PR. All markings and identification must adhere to government specifications including physical identification of bare items and removal of government identifiers from non-accepted supplies. The delivery must be shipped to the designated receiving warehouse in Tracy, California, with a required ship date of March 28, 2027, matching the original delivery date. Transportation guidance is governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A7-26-T-605X, issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 10, 2026. The NAICS code is 335999, indicating other electrical equipment and component manufacturing. The point of contact is Renee Bynum, and all contractual obligations, including packaging, labeling, inspection, and delivery, are binding and must conform to DLA mandates without deviation unless explicitly permitted in writing. Quantity variance is strictly zero percent, and no substitutions or deviations are allowed without approval.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605H
This contract pertains to the procurement of six structural fitting components identified by NSN 0001S00000052 under solicitation SPE4A7-26-T-605H, with a delivery deadline of 588 days after contract award. The requirement is set aside exclusively for small businesses as defined under FAR 19.5, with the NAICS code 336413 indicating the classification under Aerospace Product and Parts Manufacturing. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific identifiers R and I directing compliance to documented criteria. The deliverables must adhere to DLA packaging standards and include mandatory documentation for source approval requests. The item is subject to stringent export controls under ITAR or EAR, restricting technical data sharing without explicit authorization, and access is limited to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Compliance with configuration change management is required through engineered change proposals for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating qualification per procurement note H02. Physical marking of the bare item is mandated, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance requires CMMC Level 2 certification by an approved third-party assessment organization. Data related to this procurement is classified as Covered Defense Information under RD002, and the point of contact for inquiries is April Reed at the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER, FLUID
Solicitation # SPE4A7-26-T-605E
This contract is for the procurement of two hydraulic fluid filter assemblies with NSN 1650-00-831-8146 under solicitation SPE4A7-26-T-605E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The requirement is a Total Small Business Set-Aside under NAICS code 336413, with a response deadline of August 10, 2026, and a delivery date 207 days after contract award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applies to all parties including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and cleared access through DLA may receive the technical data. The place of performance is Robins Air Force Base, Georgia, and the primary point of contact is April Reed, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARD
Solicitation # SPE4A7-26-T-605N
The contract specifies the procurement of a Terminal Board identified by NSN 5940-01-128-2240 and part number ST5M1379-006A, with an approved quantity of 148 units at a unit price of $148.00, resulting in a total contract value of $21,904. The item is classified as a critical application component, with approved suppliers including The Boeing Company, Trico Manufacturing Inc., RMB Miniature Bearings Inc., and Stroco Manufacturing Inc. Deliveries are required FOB origin, with inspection and acceptance occurring at the destination, and all units must be delivered within 154 days of contract award, with the original required delivery date set for January 12, 2027. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, with DLA requirements taking precedence. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and zero non-conformances required unless otherwise stated. All packaging and palletization must comply with DLA’s RP001 requirements, and items must be marked in compliance with RQ017 for physical identification. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and transportation procedures must follow DLAD Proc Notes C19 and C20. The contract includes mandatory documentation for source approval, removal of government identifiers from non-accepted items, and all requirements are governed by the DLA Master List revision in effect on the solicitation date.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
GENERATOR, OXYGEN-NI
Solicitation # SPE4A7-26-T-605B
The contract pertains to the procurement of one Oxygen-NI Generator, identified by NSN 3655-01-680-9902 and part number HPCF-K02-0110-GG, manufactured by South-Tek Systems, LLC, with technical and quality requirements aligned to the DLA Master List and referenced engineering drawing NR 5B5M3 11B4550216 Revision A dated January 28, 2022. The item must adhere to stringent specification controls, including configuration change management through Engineering Change Proposals, and is subject to Covered Defense Information protocols. Quality assurance protocols mandate sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 03-03 Method 50, while palletization follows DLA-specific requirements. The generator is to be delivered FOB origin within 20 days, with no variance permitted in quantity, and inspection and acceptance occur at the destination location. Delivery is directed to the 1st Armored Division Sustainment Brigade at Fort Bliss, Texas, with shipment required via traceable means—parcel post is prohibited. The contract is issued under solicitation SPE4A7-26-T-605B, a Total Small Business Set-Aside under NAICS code 333998, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026. The purchase request number is 7017659301, and the unit of issue is each. The item is designated for government use with assigned codes including IPD 12, DIC A0A, and tracking identifiers such as TCN W8001Z62030574 and RDD 218. Supplier compliance with all technical and quality requirements referenced in the DLA Master List is contractually binding, and any deviations require formal variance requests.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ARMOR, SUPPLEMENTAL,
Solicitation # SPE4A7-26-T-606G
The contract is for one unit of supplemental armor for small arms fragmentation, sourced from Foster-Miller, Inc. with CAGE code 30233 and NSN 1560-01-434-6349, under solicitation number SPE4A7-26-T-606G. Delivery is required within 20 days FOB origin to North Kingston, Rhode Island, with no tolerance for quantity variance. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-1916 or comparable zero-based sampling plans for inspection, with zero non-conformances required unless otherwise specified. The supplier must adhere to rigorous packaging directives including MIL-STD-2073-1E and MIL-STD-129 for marking, while also following Qinetiq Packaging Instruction 1210300059 and DLA packaging requirements. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and hazardous materials shipping procedures must be followed per IP025. Shipping must occur via the fastest traceable means—parcel post is explicitly prohibited. The contract includes detailed inspection and acceptance at destination and specifies the responsible government point of contact as April Reed of the Department of Defense, with an original required delivery date of June 2, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
INSULATION, SUPPORT
Solicitation # SPE4A7-26-T-606D
The contract specifies the procurement of a commercial off-the-shelf (COTS) insulation and support item identified by part number 02250158-385 and NSN 1680-01-649-5646, with a quantity of one unit to be delivered within five days under the solicitation SPE4A7-26-T-606D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be packaged in accordance with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The item must be palletized per DLA requirements, labeled with the assigned unit of issue, and shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is Marine Aviation Logistics Squadron 14 at MCAS Cherry Point, North Carolina, with the original required delivery date set for March 4, 2026. All technical and quality provisions referenced in the DLA Master List take precedence over other standards, and the contract includes detailed shipping, identification, and government-only fields for logistics and tracking purposes.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333618
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A7-26-T-605M
The contract pertains to the procurement of a pressure transmitter, identified by NSN 6620-00-974-6488 and part numbers 209-060-602-11 from Bell Textron Inc. and 381065-007 from Simmonds Precision Products Inc., with a required quantity of four units. Delivery must be completed within 20 days of contract award, shipped FOB origin, and subject to zero variance in quantity. Inspection and acceptance both occur at the origin, with packaging strictly following MIL-STD-2073-1E and marking in accordance with MIL-STD-129, including the special code for delicate instrument handling. Packaging and palletization must comply with DLA’s standardized requirements, and the item is classified as a critical application item. The contract incorporates technical and quality standards referenced from the DLA Master List, and sampling procedures must align with MIL-STD-1916 or a zero-defect comparable plan unless otherwise stated. A Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, reflecting heightened cybersecurity obligations. All government identification must be removed from non-accepted supplies, and physical identification of bare items is mandated. The delivery destination is the Taiwan Army’s Zuoying Ammunition Sub-Depot in Kaohsiung, with no alternative freight forwarders permitted without adherence to specific DLA procedural notes. The solicitation was issued under SPE4A7-26-T-605M with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD ASSEMBLY, TURNL
Solicitation # SPE4A7-26-T-605K
The contract is for the procurement of 20 units of a STUD ASSEMBLY, TURNLOCK FASTENER with part number ET223AA3-12C and NSN 5325-01-473-2537, sourced from AVIBANK MFG. INC. located in North Hollywood, CA. All items must comply with MIL-STD-130N dated 16 Nov 2012 for identification marking of U.S. military property and adhere to DLA packaging requirements as outlined in RP001. Technical and quality standards referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The contract mandates the removal of government identification from non-accepted supplies as per RQ011. Delivery is required within 238 days after contract award, with the place of performance designated as Tracy, CA, 95304-5000. The solicitation number is SPE4A7-26-T-605K, issued on August 2, 2026, with responses due by August 10, 2026, under NAICS code 332722, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Naron Sanderlin reachable at naron.sanderlin@dla.mil or 4457374458.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CONTROL, INFRARED SE
Solicitation # SPE4A7-26-T-606E
The contract pertains to the procurement of two units of Control, Infrared SE with NSN 5850-01-595-9396 under solicitation SPE4A7-26-T-606E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days of contract award, shipped FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with palletization adhering to DLA’s packaging standards. The item must be shipped using the fastest traceable means and is explicitly excluded from parcel post delivery; the freight shipping address is in San Diego, California, with a designated hazmat receiving location. The required delivery date is July 27, 2026, and the solicitation response deadline was August 10, 2026, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Special marking is not required, and the unit of issue is each, priced at $2.00 per unit for a total of $4.00. Government-specific identifiers such as IPD, DIC, and ADV codes are included for internal use.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details