Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPACER, SLEEVE

Active
SPE4A5-26-T-302MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.

General Info

One spacer sleeve, part 741073CL13, due July 15, 2026, to Fort Irwin, CA, with strict quality and traceability requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
KOONJ SPICER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,SLEEVE
SPACER,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ046: FAA Bare Item Marking Requirements RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
NOTES:
SPE4A5-26-T-302M
SECTION B
Refer to Proc Note L32 for higher level quality requirements
CRITICAL APPLICATION ITEM
RTX CORPORATION 77445 P/N 741073CL13
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017493773 0001 EA 1.000
NSN/MATERIAL:5365016879226
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80WKN
W6F7 NTC CRP RIC-AMR
AWCF SSF
BLDG 860B SO DEPOT LOOP
FORT IRWIN CA 92310-9986
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
SPE4A5-26-T-302M
SECTION B
PR: 7017493773 PRLI: 0001 CONT’D
W80WKN
W6F7 NTC CRP RIC-AMR
AWCF SSF
BLDG 860B SO DEPOT LOOP
FORT IRWIN CA 92310-9986
US
MARKFOR
W80WKN
W6F7 NTC CRP RIC-AMR
AWCF SSF
BLDG 860B SO DEPOT LOOP
FORT IRWIN CA 92310-9986
US
M/F: (TCN) W80WKN61880143
RDD: 203
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE4A5-26-T-302M NSN/Part Number: 5365-01-687-9226 Quantity: 1 EA Purchase Request: 7017493773QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
SPACER, PLATEThe contract specifies the procurement of four SPACER, PLATE units with NSN 5365016693134 and part number 162/01130A, under solicitation SPE4A0-26-T-3976, with a unit price of $4.00 and a total price of $16.00. Delivery is required within five days FOB origin, with no variance allowed in quantity. All items must comply with DLA’s technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, employing zero non-conformances for acceptance unless otherwise directed, with attributes assigned verification levels or AQLs as specified. Physical identification and bare item marking must conform to RQ017, and palletization must meet DLA packaging requirements. The shipment must be delivered to Fort Hood, Texas, using traceable freight methods, excluding parcel post, and is designated as an RDD(3-POS RDD)/NMCS shipment. Inspection and acceptance occur at origin, and the item is managed under a government procurement system with assigned identifiers including TCN, RDD, and project codes, with the original delivery date set for July 16, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract pertains to the procurement of four BUSHING, SLEEVE items with NSN 5365-01-650-6909 under solicitation SPE4A6-26-T-08GW, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days after award, with performance specified to occur in Tracy, California, 95304-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The item is subject to tailored higher-level quality requirements for manufacturers and non-manufacturers, configuration change management procedures, and specific packaging standards dictated by DLA. Export control regulations apply, as the item involves technical data subject to ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location; access is restricted to contractors certified under the US/Canada Joint Certification Program, having completed mandatory DLA training, and received formal approval. Physical marking of the item is required per RQ017, though Item Unique Identification is waived per customer request. The contract prohibits removal of government identification from non-accepted supplies and mandates strict handling of defense information under applicable DFARS clauses. All responses must be submitted by July 29, 2026, with primary point of contact Robye Dewitt reachable via email or phone for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SHIM
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SHIM
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
FASTENER TAPE, PILEThe contract is for the procurement of FASTENER TAPE, PILE, identified by NSN 5325-01-716-1609 and manufacturer part number 01CW5 from VELCRO USA INC, with a total quantity of 14 units priced at $14.00 per unit, under solicitation SPE4A6-26-T-08GL. The item is classified as a commercial item and a critical application item, subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, where any ‘R’ or ‘I’ number applies. Sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise specified. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. Delivery is FOB origin with a 171-day lead time, with a required delivery date of December 13, 2026, and a need ship date of January 17, 2027. The quantity variance is strictly limited to plus or minus zero percent. Inspection and acceptance occur at the destination, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. Palletization must conform to DLA packaging standards, and transportation guidance is governed by DLAD Proc Notes C19 and C20. Documentation for source approval, compliance with quality assurance provisions, and use of standardized units of issue are mandatory. The contract emphasizes full adherence to government specifications, with failure to meet these criteria resulting in non-acceptance of supplies, and all government identification must be removed from rejected items.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
EYELET, METALLIC
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract is for the procurement of four BUSHING, SLEEVE units with NSN 5365-01-665-3713 under solicitation SPE4A7-26-T-588A, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 39 days of award, and the submission deadline for proposals is July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identifiers removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications are assigned specific verification levels or AQLs; unspecified attributes are treated as major. Technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons without prior authorization, and access is limited to contractors certified under the US/Canada Joint Certification Program who have completed required DLA export control training and been formally approved. The place of performance is Cherry Point, North Carolina, with Soni Randolph designated as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
Federal
SHIM
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332119
New
Federal
RING,EXTERNALLY THR
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAININGThe contract is for the procurement of 500 retaining rings, identified by NSN 5325-01-721-3224 and commercial part numbers 90304 and 93830A175, classified as a commercial off-the-shelf item under a fixed-price solicitation issued by the Department of Defense's ASC Commodities Division. Delivery is required within 20 days after order placement to a designated military installation in Yokosuka, Japan, with FOB destination terms assigning risk to the buyer upon arrival. Packaging must strictly adhere to MIL-STD-2073-1E with packaging code U, using preservation method 33 and no preservation or cushioning materials, while unit containers and intermediate containers follow specified codes. All items must be marked in compliance with MIL-STD-129, including barcoding, with no special marking required. Sampling procedures mandate zero defect acceptance under MIL-STD-1916 or ASQ H1331, Table 1, with unspecified attributes treated as major; MIL-STD-105/ASQ Z1.4 may define sample size but not acceptance criteria. Palletization must conform to DLA’s RP001 packaging requirements. The total contract value is $500.00, with a strict zero percent variance allowed on quantity. The contractor must comply with a broad range of regulatory and administrative requirements, including flow-down clauses for trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, and cybersecurity safeguards under NIST SP 800-171. Subcontracting for commercial items must follow specific DFARS provisions, and all hazardous materials must be labeled per 29 CFR 1910.1200 with pre-award submission of Safety Data Sheets required for compliance. Ocean shipment must use U.S.-flag vessels unless waived, and all invoicing must be processed electronically via WAWF. Offers must include valid UEI and CAGE codes, and small business certifications for socioeconomic categories must be validated in SAM. The solicitation allows automated award based on price, with no formal evaluation factors or trade-off methodology stated. The contracting officer is Monica Clark, with deliveries routed through FPO AP 96349 and final shipping to the Yokosuka Naval Base. The contract incorporates deviations for multiple FAR and DFARS clauses, requiring strict adherence to all federal and DLA standards without exception
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract pertains to the procurement of 234 units of a SPACER, RING with NSN 5365016432231 and part number 4082316, issued under solicitation SPE7L5-26-T-4531. Delivery is required within 247 days of contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The unit price is $234.00 per item, resulting in a total contract value of $54,756.00. Packaging must comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements, referenced via R or I numbers, take precedence and must be fully observed. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The specified Unit of Issue is each (EA), with no tolerance for quantity variance. The final delivery destination is the DLA Distribution DDSP New Cumberland Facility located at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The original required delivery date is December 5, 2025, and the contract specifies that any government identification on non-accepted supplies must be removed. For transportation logistics, DLA Procurement Notes C19 and C20 apply. The responsible point of contact is Bradley Evans, reachable via phone and email provided, and the contract aligns with NAICS code 332119 under the Department of Defense’s Land Supplier Operations Engines.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332119
New
DIBBS
SHIMThe contract pertains to the procurement of eight SHIM items identified by NSN 5365017375981 under solicitation SPE4A7-26-T-582T, with a total value of $64.00. Delivery is required within 165 days of order placement, with a need ship date of January 10, 2027, and an original required delivery date of May 3, 2027. All items must be delivered FOB origin to the Defense Distribution Depot New Cumberland facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E, incorporating clean and dry preservation with no additional preservation or wrapping materials, using box containers under packaging code U, and palletization must comply with DLA Packaging Requirements for Procurement (RP001). Marking of all units must follow MIL-STD-129, including proper barcoding and outer package identification, with no special marking required. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted in the sample lot unless otherwise directed, and critical, major, and minor attributes are to be evaluated with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The contractor is required to provide Safety Data Sheets in compliance with 29 CFR 1910.1200 and label any hazardous materials per DFARS 252.223-7001, while also adhering to prohibitions on hexavalent chromium and hazardous material storage per clauses 252.223-7008 and 252.223-7006. Physical bare item marking (RQ017) is mandatory, and documentation for source approval must meet DLA Technical and Quality Requirements referenced via R or I numbers from the official DLA Master List. The contract is subject to a range of FAR and DFARS clauses including 52.216-1 Alt I which governs the type of contract, 52.222-50 and 52.222-54 addressing human trafficking and employment eligibility verification, 252.204-
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, BREAKAWAYThe contract pertains to the procurement of 12 units of a breakaway fitting identified by NSN 1560-01-148-1719 under solicitation SPE4A5-26-T-299Y, with a delivery deadline of 171 days after award. The acquisition is structured as a total small business set-aside under NAICS code 336413, managed by the Department of Defense through the ASC Supplier Operations OEM Division. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but item unique identification is explicitly not required per the service customer’s directive. Measuring and test equipment must meet specified standards, and documentation for source approval is mandatory. The place of performance is New Cumberland, Pennsylvania, with Kirstie Ragsdale as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
STATOR ASSEMBLYThe contract pertains to the procurement of 102 units of a stator assembly identified by NSN 1630-01-320-6510 and part number 59002936-001 manufactured by Honeywell International Inc. The item is designated as a Critical Safety Item and a Critical Application Item, triggering stringent inspection requirements including 100% verification of critical characteristics such as dimensional tolerances of .001 inch or less, surface finishes of 16 RMS or finer, geometric tolerances of .002 inch or less, Class 3 or higher threads, angular tolerances of 1 degree or tighter, hardness, material certifications, dynamic and static balancing, special processes like welding and plating, heat treatment, and more. All items must be marked in compliance with MIL-STD-129, including contractor and actual manufacturer CAGE codes, part number, lot, and serial number if available, with no unit identification required per the service customer’s request. The contract mandates adherence to SAE AS9100 quality standards and requires a CMMC Level 2 Self-Assessment for cybersecurity compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and all documentation must satisfy DLA’s packaging and procurement requirements under RP001 and MIL-STD-2073-1E. The item is classified as a commercial item with no shelf life and is subject to a firm fixed price with no variance permitted in quantity. Inspection and acceptance occur at origin, with delivery due 620 days after award, shipped to DLA Distribution in San Diego under FOB origin terms. Waivers or deviations require explicit approval from the DSC Contracting Officer.
Precision Turned Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334513
New
DIBBS
INDICATOR, RATE OF FThe contract pertains to the procurement of one unit of an indicator with a rate of flow, identified by part number FT-32AEYS-LEAS4072 and NSN 6680015378621, issued under solicitation SPE4A5-26-T-298N. Delivery is required within 171 days from the contract date, with a required delivery date of November 28, 2026, and a need ship date of January 17, 2027. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and marking strictly following these guidelines. Sampling and verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are defined with verification levels or AQLs as mandated. The product is classified as a Critical Application Item and must have all government identification removed if non-accepted, with bare item marking as required by RQ017. Covered Defense Information applies, and all documentation must align with referenced DLA directives. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WEIGHT, WHEEL BALANCThe contract pertains to the procurement of Wheel Balancing Weights, identified by NSN 1630-01-281-8724 and part number 2609689 from Honeywell International Inc., with a quantity of 265 units. It is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List revision in effect on the solicitation issue date, and all inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Critical attributes are subject to verification level VII, major to IV, and minor to II, with AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and though Unique Item Identification is not required, physical marking per RQ017 is mandatory. Delivery is FOB origin with a 171-day lead time, and acceptance is at destination. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous, with palletization in compliance with DLA Packaging Requirements. The required delivery date is March 2, 2027, with a ship date of January 17, 2027. All shipments must be sent to the DLA San Joaquin receiving warehouse in Tracy, CA, and transportation procedures must follow DLAD Proc Notes C19 and C20. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling protocols. The contract is managed by the Department of Defense under solicitation number SPE4A5-26-T-300F, with Dominique Howard as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SHIMThe contract pertains to a shim item with NSN 5365-00-159-4800, for a quantity of 162 units, under purchase request 7017572531, with a delivery requirement of 171 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons—whether inside or outside the United States—is strictly regulated and requires prior authorization from the Department of State or Department of Commerce. Use and access to this controlled data are restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on proper handling of DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire, all as mandated by DFARS 252.225-7048. The solicitation number is SPE4A5-26-T-299G, posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510. Performance is designated for Hill AFB, Utah, with Anthony Duguay listed as the primary point of contact.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details