This Solicitation opportunity from California was posted on September 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Special Inspections and Materials Testing Services for Project # 21055 Santa Maria Probation Juvenile Justice Center Units 1/2/3 Remodel

Closed

21055-3State & Local

Submission Closed09/29/2026, 10:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract, titled First Article Testing and Validation Services, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves performing First Article Testing for prime contractors to ensure that initial production units meet strict close tolerance requirements and Navy-mandated safety specifications. Work is performed in San Diego and utilizes CMM and precision gauges to validate components before they are delivered for government approval. The selected contractor is responsible for providing comprehensive documentation and test results, culminating in the delivery of a First Article Test Report and an approved test unit. This effort falls under NAICS code 541380 and is critical for validating the quality and safety of supply contracts managed by DLA Weapons Support.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Quality Compliance & Certification ServicesThe Aerospace Quality Compliance and Certification Services subcontract involves providing technical verification and quality documentation audits for prime contractors supporting DLA Weapons Support ASC projects. The primary scope of work includes validating technical data against the DLA Master List of Technical and Quality Requirements and verifying Critical Application Item certifications specifically for ITT Aerospace part number 57802M. The selected provider must possess specialized expertise in AS9100 standards and DLA R and I quality codes to deliver comprehensive quality certification reports and compliance documentation packages. This Department of Defense requirement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California. The project falls under NAICS code 541380. Interested parties should note the response deadline of November 6, 2026, for this specialized aerospace quality assurance engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract opportunity, issued by the Department of Defense for the DLA Weapons Support Aviation Supply Chain, involves performing First Article Testing (FAT) for internally relieved body bolts. The selected contractor will be responsible for validating the dimensions, material properties, and overall performance of a single sample unit against the technical data package. This process requires the use of Coordinate Measuring Machine (CMM) and material testing laboratory equipment to ensure full compliance. To qualify for Navy CSI validation, the contractor must hold AS9100 or ISO 9001 certification. The final deliverables for this project include a comprehensive FAT report and the return of the tested sample unit. This is a total small business set-aside under NAICS code 541380, with the place of performance located in Cherry Point. Responses are due by November 6, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves performing specialized testing and validation for prime contractors on DLA Troop Support aerospace projects. The scope of work requires the testing of three shoulder bolt units using metrology equipment to validate material properties and dimensions according to BAC drawings. The selected provider must apply sampling standards per MIL-STD-1916 or ASQ H1331, coordinate closely with the Quality Assurance Representative, and deliver a formal First Article Test Report. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. To be eligible for this contract, the provider must hold AS9100 certification. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Quality Inspection and Sampling

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) and Production Lot Testing (PLT)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, involves providing technical validation and testing services for prime contractors on US Navy aerospace projects. The scope of work focuses on conducting First Article Tests and Production Lot Tests using specialized rigs to ensure the structural and functional integrity of launch bar drive links. Because these components are classified as Navy Critical Safety Items, the contractor is responsible for delivering formal test reports and certifications of compliance. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties must adhere to the timeline established by the posting date of October 29, 2026, with a response deadline set for November 9, 2026. The primary deliverables for this engagement are the FAT Certification and the corresponding PLT Test Reports.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing and Quality Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Testing Services (FAT & PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Production Lot Testing (PLT) for Adapter AssembliesThis subcontract involves performing Production Lot Testing for adapter assemblies to support prime contractors on DLA Weapons Support Maritime Supply Chain projects. The selected provider will execute quality and functionality validation tests in accordance with Quality Assurance Plan QAP 1TLH0 ICS3185-1, utilizing specialized laboratory equipment and testing rigs. The primary deliverable is a comprehensive test report and certification verifying that each production lot adheres to all required specifications. The project falls under NAICS code 541380 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, regarding this requirement posted on October 29, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Production Lot Testing (PLT) and Validation ServicesThis subcontract, titled Production Lot Testing (PLT) and Validation Services, involves performing quality conformance validation for regulator kits on US Navy aviation projects. The selected contractor will be responsible for selecting and preparing PLT samples from production lots and managing the traceable shipping of these materials to NAWC Patuxent River for evaluation. All activities must strictly adhere to the specific PLT protocols mandated by NAWC Patuxent River, culminating in the delivery of validated samples and comprehensive test reports. Managed by the DLA Weapons Support Fluid Handling Division under the Department of Defense, the work is categorized under NAICS code 541380. The place of performance is located in Jacksonville, Florida. Interested parties should note the response deadline of November 9, 2026, for this specialized technical support requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) for Pressure Door SealsThis subcontract involves performing First Article Testing for pressure door seals on DLA aircraft component contracts. The selected provider must utilize a qualified laboratory capable of DoD certification to validate dimensional accuracy, material compliance, and pressure integrity using specialized measurement tools and pressure testing chambers. The primary deliverables for this engagement are a comprehensive First Article Test Report and the formal certification of the first unit. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, the work is to be performed at Robins Air Force Base. Interested parties must adhere to the response deadline of November 6, 2026, ensuring all technical requirements for the pressure seal validation are met according to the specified NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days

AI Contract Overview

The County of Santa Barbara is soliciting proposals for a qualified Special Inspection and Materials Testing firm or individual to support Project 21055, the remodel of housing units 1, 2, and 3 at the Santa Maria Juvenile Justice Center. The project, which has an estimated construction value of 5,801,157.00 dollars, utilizes a Design-Bid-Build delivery method. The scope of work involves upgrading units 1 and 2 to a higher security level to accommodate older wards, including the installation of automated locking systems, new cell doors, security cameras, and ADA-compliant shower rooms. Unit 3 will be remodeled into a lower security housing unit for low-risk wards, featuring updated lighting, security systems, new finishes, and ADA-compliant shower facilities. The selected provider will be responsible for ensuring the project remains on schedule and within budget by performing critical services such as structural steel welding inspections, anchor testing, concrete reinforcing, and fireproofing inspections. The project timeline spans from June 25, 2026, to October 12, 2027. The firm must coordinate closely with the Construction Manager, General Services Department staff, the Inspector of Record, the General Contractor, and the Architect of Record. Proposals for these services were posted on September 15, 2026, with a submission deadline of September 29, 2026.

General Info

Santa Barbara County seeks special inspection and materials testing for juvenile center remodels.

Agency

California → County of Santa Barbara

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CA, USA

Set-Aside

NONE

Documents

RFQ/P Special Inspection and Materials Testing Services - Project 21055

rfqp

High

SANTA MARIA JJC UNIT 1 & 2 REMODEL – Sheet A9.11 Interior Elevations

construction-document

High

Santa Maria JJC Unit 3 Remodel - Construction Drawings

specifications

High

Santa Maria JJC Unit 3 Remodel - Special Inspection Requirements

specifications

High

SM Probation Construction Schedule with Special Inspections

specifications

High

SM Probation Special Inspection List

specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedSep 15

Solicitation

Response DeadlineSep 29

Deadline has passed

Submission Closed

09/29/2026, 10:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → County of Santa Barbara

Contacts1 person available

OfficeN/A

Organization / AgencyCalifornia → County of Santa Barbara

Office AddressN/A

Contacts

Richard Whirty

contact@example.gov

+1 (555) 000-0000

Full Description

The County is seeking the services of a Special Inspection and Materials Testing firm or individual for the Project. The project scope is to remodel housing units 1/2/3 at the Santa Maria Juvenile Justice Center. The remodel will consist of upgrading units 1&2 to a higher security level to meet current institutional programming needs for holding older wards longer locally. These upgrades will include new cell doors and automated locking systems, cameras and security systems upgrades, new finishes, shower room updated to meet ADA and other operational codes. Unit 3 remodel will be to create a lower security housing unit for low- risk wards that includes replacing of cell doors, lighting, security system updates, shower room updates for ADA and other required codes and new finishes in the unit. Using the original project drawing files provided, “Special Inspection Requirements from Unit 3 Drawings with addendum 1”, Structural Sheets from Unit 1&2 Drawing Set, and SM Probation Construction Schedule with Special Inspections, and SM Probation Special Inspections List PDF. A qualified, Special Inspection and Materials Testing Services firm shall provide the services detailed herein (“Services”) to ensure timely and cost-effective construction of the Project. The delivery method is Design-Bid-Build. The County expects the Special Inspection and Materials Testing Services team to protect the County’s interests and assist the Construction Manager with keeping the Project on schedule and on budget. The Special Inspection and Materials Testing Services team shall coordinate and communicate with County personnel, including, but not limited to, the Construction Manager General Services Department staff designee, Inspector of Record, General Contractor and Architect of Record, on all aspects of the Scope of Work and the Project during the Term of the Agreement (defined below).