Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Special Purpose Electrical Cable Assembly Fabrication

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of nine special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires build-to-print assembly for NSN 5995014963699, with strict adherence to quality and technical standards including zero-based sampling per MIL-STD-1916, electrical continuity testing, and marking according to RQ017. The contractor must maintain a CMMC Level 2 self-assessment and ensure full compliance with MIL-STD-129. Performance will take place in Greensboro, North Carolina, under NAICS code 335129. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

General Info

Fabricate nine special purpose electrical cable assemblies following strict MIL-STD quality and technical standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

335129 - Other Lighting Equipment Manufacturing

Place of Performance

GREENSBORO, NC, 27409, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-5899.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates special purpose electrical cable assemblies for prime contractors on DLA Weapons Support ASC projects. Performs build-to-print assembly for NSN 5995014963699, including zero-based sampling per MIL-STD-1916, electrical continuity testing, and marking per RQ017. Requires CMMC Level 2 self-assessment and compliance with MIL-STD-129. Delivers nine completed and tested cable assemblies.

Similar Contracts

Same NAICS industry code

Manufacturing of Power Cable Assemblies (NSN 6150-01-656-1733)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the manufacturing of 12 power cable assemblies identified by NSN 6150-01-656-1733. The scope of work includes the fabrication, cutting, stripping, and termination of connectors, as well as the application of protective sleeving and the execution of mandatory continuity and insulation resistance testing. Performance will take place in Texarkana, Texas, under NAICS code 335129. The opportunity is a total small business set-aside requiring strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. Interested parties must respond by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly SupplierThis subcontract involves the supply of four specialized electrical cable assemblies for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected supplier is responsible for manufacturing these assemblies according to strict military technical drawings, with the option to utilize additive manufacturing processes where appropriate. The contract mandates strict adherence to military standards for logistics, specifically requiring compliance with MIL-STD-129 and MIL-STD-2073-1E for marking and packaging, as well as RP001 for palletization. Performance for this requirement is centered in Tracy, California, under NAICS code 335129.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Electrical Lead (NSN 6150015520789) SupplierThis subcontract opportunity is for the manufacture or procurement of 14 electrical leads, identified by NSN 6150015520789, to support prime contractors under DLA Weapons Support contracts. The supplier must ensure all products comply with the DLA Master List of Technical and Quality Requirements (RA001) and adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Additionally, all materials are required to meet the regulations set forth by the Buy American Act and the Berry Amendment. The contract is a total small business set-aside under NAICS code 335129, managed by the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament. Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

Qualified Manufacturer/Supplier of Electrical Plug ConnectorsThis subcontract involves the manufacture and supply of electrical plug connectors for prime contractors supporting the DLA Weapons Support Active Devices Division. The specific requirement is for 15 units of part number M83723/97S1610N, identified by NSN 5935-01-364-2841. All supplied components must strictly adhere to MIL-DTL-83723/97C(2) and MIL-DTL-83723H(4) specifications, and the provider must maintain QPL/QML certification. Deliveries are to be made to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict compliance with MIL-STD-129 and RP001 packaging standards to ensure proper handling and transport. This procurement falls under NAICS code 335129 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

Supply of Special Purpose Electrical Cable Assemblies (NSN 6150-01-715-8920)This subcontract involves the manufacture or sourcing of three special purpose electrical cable assemblies, specifically NSN 6150-01-715-8920, to support prime contractors delivering for the Defense Logistics Agency. The contractor is required to adhere to strict quality and logistics standards, including packaging according to ASTM D3951 and marking and labeling in compliance with MIL-STD-129. Additionally, the agreement allows for the use of additive manufacturing for ESA evaluation purposes. The project falls under NAICS code 335129 and is associated with the Department of Defense. Performance of the contract is designated for Shaw AFB, zip code 29152-5125. The solicitation was posted on October 21, 2026, with a response deadline set for November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Electrical Contacts (NSN 5999-01-653-5972)This subcontract, issued by the Department of Defense under the DLA Weapons Support Active Devices Division, requires the supply of 47 specialized electrical contacts. The contractor is responsible for manufacturing or sourcing parts that match NSN 5999016535972 and Smiths Interconnect Americas Inc part number 019512-2081. All items must be delivered FOB Origin to DLA Distribution Warner Robins, Georgia, and must strictly adhere to the DLA Master List of Technical and Quality Requirements. The contract mandates specific compliance with military standards, requiring packaging per MIL-STD-2073-1E and marking per MIL-STD-129. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 335129. Interested parties must submit their responses by the deadline of November 2, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MIL-DTL-38999 Electrical Plug Connector SupplierThis subcontract involves the manufacture or procurement of 224 QPL-certified electrical plug connectors, specifically part number D38999/26WB98SB, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. All units must be produced in accordance with MIL-DTL-38999 specifications and adhere to DFARS 252.204-7012 standards to ensure regulatory and security compliance. The supplier is required to follow MIL-STD-129 and RP001 packaging guidelines for all deliveries. This opportunity falls under NAICS code 335129 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Indicator Lights (NSN 6220013099537)This subcontract involves the supply of one indicator light, identified by NSN 6220013099537, for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain ESOC Buys. A critical technical requirement is that the item must not be produced using additive manufacturing processes. The supplier must possess a valid CAGE code to be eligible for the contract. Logistical requirements specify that the item be packaged and palletized according to RP001 and MIL-STD-129 standards, including the application of Special Marking Code 01 for fragile contents. The final deliverable is one properly marked and packaged indicator light to be delivered to the designated place of performance in APO 96368-5136.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturing of Branched Electrical Power Cable AssembliesThis subcontract involves the manufacturing of branched electrical power cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for fabricating cables according to specific technical data packages and reference drawings, conducting First Article Testing, and ensuring all packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The final deliverables consist of 67 cable assemblies and a comprehensive FAT report. To be eligible, the contractor must maintain ISO 9001:2015, CMMC Level 2, and US/Canada Joint Certification Program certifications. Performance for this project will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 20, 2026, with a response deadline of October 28, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Street Lighting Material SupplierThis subcontract agreement involves the supply of street lighting materials for municipal projects within the City of San Jose, California. The selected supplier is responsible for providing thirteen 32-foot pedestrian and street lighting poles along with luminaires that adhere to International Dark-Sky Association standards. All luminaires must strictly comply with ARRA Buy America requirements, and the supplier is tasked with delivering all specified hardware directly to the project site. The opportunity was posted on October 16, 2026, with a response deadline of November 5, 2026. Classified under NAICS code 335129, the contract focuses on the procurement of specialized lighting equipment for prime contractors operating in the 95113 zip code area of San Jose.

City of San José

POSTED

DEADLINE

Supply of Qualified Electrical Plug Connectors (NSN 5935-01-506-0091)This subcontract involves the manufacture and supply of eleven qualified electrical plug connectors, specifically NSN 5935-01-506-0091, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The products must strictly adhere to MIL-DTL-28748/4F(3) and MIL-DTL-28748E specifications and must be QPL-qualified. Additionally, all supplies must comply with the Buy American Act and the Berry Amendment to ensure domestic sourcing requirements are met. Logistical requirements mandate that packaging follows MIL-STD-2073-1E and MIL-STD-129 standards, with delivery terms set as FOB Origin. The performance of the contract is centered in Tracy, California. Interested parties should note the response deadline of October 26, 2026, for this Department of Defense procurement under NAICS code 335129.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Branched Wiring Harness Fabrication (Part E8CR128-0220)This subcontract, issued by the DLA Weapons Support ASC Commodities Division, requires the fabrication of 11 branched wiring harnesses, part number E8CR128-0220, according to Renk America LLC specifications. The project is a total small business set-aside under NAICS code 335129, with performance taking place in New Cumberland. All units must be produced using sampling methods compliant with MIL-STD-1916 or ASQ H1331 and delivered in packaging that meets MIL-STD-2073-1E and MIL-STD-129 standards. To be eligible, the contractor must hold either SAE AS9003 or ISO 9001 quality certification and maintain CMMC Level 2 cybersecurity compliance. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 10 hours

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Flexible Cable SupplierThis subcontract involves the manufacture or procurement of three flexible cable units for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The cables must strictly adhere to NSN 5995-01-195-2776 and Part Number F172-PP-0265-A6 from Flexco Microwave Inc, with a requirement for rigorous quality assurance to ensure all technical specifications are met. Notably, any items produced via additive manufacturing must receive ESA approval prior to delivery. The project is categorized under NAICS code 334418 and requires the delivery of the three units to a designated shipping point in Tracy, California. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Hinge Pins (NSN 5315006331934)This subcontract involves the supply of precision-manufactured hinge pins, specifically NSN 5315006331934, to support prime contractors under the DLA Weapons Support ASC Commodities Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing the pins using precision machining equipment and ensuring all deliverables are transported to the designated DLA facility at Tinker AFB. Strict adherence to the DLA Master List of Technical and Quality Requirements and DFARS regulations is mandatory for this engagement. The opportunity falls under NAICS code 332510, with a response deadline set for October 30, 2026.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310010978025)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 11,484 flat washers identified by NSN 5310010978025. The selected provider will support prime contractors in fulfilling DLA supply contracts, with performance taking place in New Cumberland. To be eligible, contractors must possess a valid CAGE code and UEI, and the opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The contractor is responsible for strict adherence to DLA specifications, including packaging per RP001, physical identification marking per RQ017, and the removal of government identification per RQ011. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310011708539)This subcontract involves the manufacture or sourcing of 23 flat washers, identified by NSN 5310011708539, to support prime contractors on DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The contractor must ensure all items are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement and coordinate delivery through the First Destination Transportation program. Additionally, the provider is required to maintain an active SAM registration to facilitate invoicing via the Wide Area Workflow system.

Other Nonferrous Metal Foundries (except Die-Casting)

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply and Manufacture of Quick Release PinsThis subcontract involves the manufacture and supply of 100 precision-engineered quick release pins for the DLA Weapons Support ASC Commodities Division under the Department of Defense. The items must strictly adhere to NSN 5315014943040 specifications and are classified as Critical Application Items. Production requires the use of precision machining and marking equipment, with bare item marking performed according to RQ017. Quality assurance is a primary requirement, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332710. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing military-grade packaging and marking for 500 pins, ensuring all items are processed according to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor must utilize standardized military marking equipment and MIL-SPEC materials to prepare the shipment for FOB Origin delivery to DLA Distribution Warner Robins. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place at Robins Air Force Base. Interested parties should note the response deadline of October 30, 2026, for this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 14 hours ago

DEADLINE

Cadmium Plating and Chromate FinishingThis subcontract involves providing specialized chemical plating and finishing services for the DLA Weapons Support ASC Commodities Division. The scope of work requires the application of a cadmium plated chromate finish to 500 steel pins, ensuring that all thickness and adhesion standards strictly adhere to NASM20392 and NASM5673 technical data packages. To achieve this, the contractor must utilize cadmium plating baths and chromate conversion tanks, incorporating rigorous chemical testing to verify thickness before the final delivery of the 500 finished pins. The project is categorized under NAICS code 332813 and will be performed at Robins Air Force Base. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS