Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Special Purpose Electrical Cable Assembly Fabrication

Active

Federal

Response Deadline10/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work specifically requires the assembly of NSN 5995-01-659-3383 in accordance with DLA Master List RA001, with strict adherence to MIL-STD-2073-1E packaging and MIL-STD-129 marking standards. All delivered products must be fully tested and meet rigorous military specifications. The project is categorized under NAICS code 335931 and will be performed in Fort Hood, Texas. Due to the nature of the defense work, the contractor must maintain ITAR/EAR registration and ensure full compliance with DFARS 252.204-7012. The solicitation was posted on October 8, 2026, with a response deadline of October 16, 2026.

General Info

Fabrication of special electrical cable assemblies for DLA in Fort Hood, Texas.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

335931 - Current-Carrying Wiring Device Manufacturing

Place of Performance

FORT HOOD, TX, 76544, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-1247.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates special purpose electrical cable assemblies for prime contractors on DLA Weapons Support ASC projects. Performs assembly of NSN 5995-01-659-3383 per DLA Master List RA001, MIL-STD-2073-1E packaging, and MIL-STD-129 marking. Requires ITAR/EAR registration and DFARS 252.204-7012 compliance. Delivers completed, tested cable assemblies meeting military specifications.

Similar Contracts

Same NAICS industry code

59--SWITCH,SENSITIVE

Solicitation # SPE7M827T0175

DLA Weapons Support

POSTED

about 21 hours ago

DEADLINE

59--SWITCH,PRESSURE

Solicitation # SPE7M827T0143

DLA Weapons Support

POSTED

about 21 hours ago

DEADLINE

59--CABLE ASSEMBLY,SPECIAL

Solicitation # SPE4A627T3596

POSTED

about 21 hours ago

DEADLINE

Specialized Wire and Connector SupplyThis subcontract involves the supply of high-reliability electrical wire and connectors for prime contractors supporting the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work focuses on the delivery of bulk raw electrical components that strictly adhere to DWG PPD 802-6337554 Rev B and Brancher and Associates part number 218083269. A critical requirement of the contract is ensuring all provided materials are mercury-free in accordance with NAVSEA 5100-003D. To maintain quality and compliance, the supplier must provide full material traceability and Certificates of Conformance for all components. The opportunity is categorized under NAICS code 335931, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of 712 special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support Land Supplier Operations Engines. The work must be performed in accordance with TDP Rev C Gen 3 and specific Army drawings, with quality control sampling conducted per MIL-STD-1916, ASQ H1331, and QAP 16236. Performance will take place in Barstow, California. The project is designated as a Total Small Business Set-Aside under NAICS code 335931. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure full compliance with ITAR/EAR regulations, CMMC Level 2, and JCP certification requirements. The response deadline for this Department of Defense opportunity is October 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

MIL-SPEC Special Purpose Cable Assembly FabricationThis subcontract, issued by the DLA Weapons Support ASC Commodities Division, requires the fabrication of 2,519 feet of finished, packaged, and marked special purpose electrical cable assemblies under NSN 6150-01-619-4041. The project is a total small business set-aside under NAICS code 335931. Manufacturing must strictly adhere to MIL-DTL-24643/59B Revision B and TDP Rev A Gen 1, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Compliance requirements include a CMMC Level 2 Self-Assessment and the use of WAWF for processing. The solicitation was posted on October 9, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Special Purpose Cable Assembly Manufacturing

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-28MP

Solicitation SPE4A6-26-T-28MP, issued by the DLA Aviation ASC Commodities Division, is for the procurement of three special purpose electrical cable assemblies under NSN 5995016284627. The contract specifies a delivery timeline of 171 days after order, with a need ship date of March 8, 2027, and an original required delivery date of December 2, 2027. Terms are FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for DLA packaging and palletization requirements. Quality assurance requires sampling per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Notably, the use of mercury or mercury-containing compounds is prohibited in the hardware, preservation, and packaging. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Item Unique Identification is not required for this effort.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-97V7

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-36ZR

Solicitation SPE4A6-26-T-36ZR, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for two branched, special purpose electrical cable assemblies, part number 12106-1010-A006 and NSN 5995-01-679-8698. This requirement is intended for Foreign Military Sales to Taiwan, with a required delivery date of September 29, 2026, and a delivery lead time of 20 days after order. The contract specifies FOB Origin for delivery, inspection, and acceptance. The contractor must adhere to strict quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Key regulatory compliance includes CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to the Buy American Act and Berry Amendment. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Power Supply Teardown, Evaluation, and Repair ServicesThis subcontract involves providing specialized teardown, technical evaluation, repair, and modification services for Power Supply NSN 6130-01-630-9299. Supporting prime contractors for Navsup Weapon Systems Support Mech projects under the Department of Defense, the selected provider must execute all repairs according to TDP Version 006 and adhere to ANSI/ESD S20.20-2021 standards for electrostatic discharge protection to deliver a fully restored and modified unit. The project requires strict adherence to security and handling protocols, including CMMC/NIST SP 800-171 compliance and the capability to handle Naval Nuclear Propulsion Information. Classified under NAICS code 335931, the opportunity was posted on October 9, 2026, with a response deadline of October 26, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Aerospace-Grade Wiring Supply (SAE-AS22759)

Navsup Weapon Systems Support

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging and marking of one Bearing Unit Housing in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. To ensure compliance with safety and logistics regulations, the provider must adhere to RP001 palletization requirements and guarantee that no mercury is used in the preservation process per IP056. The contractor is responsible for coordinating the final delivery of the processed component to DLA Distribution DDSP New Cumberland. This requirement falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

DEADLINE

Third-Party Quality Assurance and Sampling InspectionThis subcontract for Third-Party Quality Assurance and Sampling Inspection supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent quality verification for prime contractors, executing sampling for critical, major, and minor attributes using Zero Based Sampling Plans in accordance with MIL-STD-1916 or ASQ H1331. Compliance with MIL-STD-105/ASQ Z1.4 is required, and all measurements must be conducted using calibrated M&TE per RT001. The contractor is responsible for delivering detailed inspection reports and certifications of conformance. Due to the nature of the technical data involved, JCP certification is a mandatory requirement for access. This opportunity falls under NAICS code 541380, with a response deadline set for October 16, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Machining and Fabrication of Bearing Unit HousingThis subcontract involves the precision machining and fabrication of one Bearing Unit Housing, part number 566-7067170-A2, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be executed in strict accordance with Basic Drawing NR 53711 7067170 Rev A and Reference QAP 1387170 Rev B. Key technical requirements include physical identification per RQ017 and guaranteed mercury-free production as mandated by NAVSEA 5300-003D. To be eligible for this project, the provider must maintain JCP certification for the handling of ITAR data and ensure full compliance with DFARS 252.204-7012. The contract falls under NAICS code 332710 and requires the delivery of one completed housing unit.

POSTED

DEADLINE

Supplier of Flap Position Indicators (NSN 6685-00-887-6814)This subcontract involves the procurement or manufacture of five new and unused Flap Position Indicators, specifically AMETEK Part Number SR-4J, for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The selected supplier must ensure all items are packaged, marked, and palletized in strict accordance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Final delivery of the packaged indicators is required at DLA Distribution DDSP New Cumberland. Quality assurance is a critical component of the agreement, requiring adherence to DLA RA001 requirements and sampling plans defined by MIL-STD-1916 or ASQ H1331. The opportunity falls under NAICS code 423840 and was posted by the Department of Defense. Interested parties must have submitted their responses by the deadline of October 19, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging, preservation, and marking for bearings to ensure they meet strict DLA acceptance criteria. Technical execution must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, incorporating specific requirements for cleaning, drying, and cushioning. The service provider is required to utilize industrial marking equipment and MIL-SPEC preservation materials to complete the deliverables. This opportunity falls under NAICS code 488510 and was posted on October 11, 2026, with a response deadline of October 16, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Annular Ball Bearing Supplier (NSN 3110-01-149-5939)This subcontract involves the manufacture and supply of 14 precision annular ball bearings, identified by NSN 3110-01-149-5939, for prime contractors supporting DLA Weapons Support ASC projects. The bearings must be produced in strict accordance with U.S. Army Tank Automotive Command Drawing 12292906 and all associated Technical Data Packages. Delivery is required FOB Origin. Due to the technical nature of the components, the supplier must possess specialized precision machining and grinding equipment. Furthermore, the contractor is required to maintain strict regulatory and security certifications, including ITAR/EAR compliance, JCP certification, and CMMC Level 2 certification.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized packaging, marking, and palletization for prime contractors, specifically requiring the delivery of three packaged and marked sleeve bushings to DLA Distribution DDSP New Cumberland. All services must adhere to strict military specifications, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 standards for palletization. The contractor is required to utilize military-specification materials and equipment to ensure all shipments meet the necessary defense standards.

Motor Vehicle Towing

POSTED

DEADLINE

Precision Machining and Supply of Sleeve BushingsThis subcontract involves the precision machining and supply of three high-precision sleeve bushings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the bushings to Part Number 6071-A103-560, ensuring they meet critical application tolerances through the use of CNC lathes and grinders. Quality assurance is a primary requirement, with sampling performed according to MIL-STD-1916 or ASQ H1331 standards. Final acceptance is contingent upon a zero-non-conformance policy, meaning all delivered components must be flawless and fully inspected to meet the strict specifications of the Department of Defense.

POSTED

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-Q-0082

Solicitation SPE4A6-27-Q-0082 is a firm fixed price request from the DLA Weapons Support ASC Commodities Division for 14 annular ball bearings, identified by NSN 3110-01-149-5939. The requirement specifies delivery within 30 days after receipt of order with FOB Origin terms. Technical compliance is mandated per U.S. Army Tank Automotive Command Drawing 12292906 and associated Technical Data Packages. The contract is not a small business set-aside and requires a contractor declaration regarding the domestic or foreign nature of the materials offered. The procurement includes stringent quality and security requirements, including inspection and acceptance at origin and adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the awardee must comply with CMMC Level 2 certification and DFARS safeguarding requirements for covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-27-Q-0081

Solicitation SPE4A6-27-Q-0081 is a Firm Fixed Price request issued by the DLA Weapons Support ASC Commodities Division for the procurement of three sleeve bushings, part number 6071-A103-560 (NSN 3120-01-523-5039). The items are designated as critical application items and must be delivered within 93 days after order to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and prohibitions on contracting with entities linked to Chinese military lobbyists.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

INDICATOR, FLAP POSITIO

Solicitation # SPE4A6-27-Q-0085

Solicitation SPE4A6-27-Q-0085 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of five Flap Position Indicators, NSN 6685-00-887-6814, part number SR-4J from AMETEK, Inc. This is a firm fixed price requirement for critical application items that must be new and unused. Delivery is required within 79 days after order, with shipping and acceptance points set at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on best value, evaluating a trade-off between price, quoted delivery, and past performance, with a heavy emphasis on Supplier Performance Risk System assessments. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with various FAR and DFARS clauses regarding business ethics, cybersecurity, and the prohibition of hazardous materials.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

HOUSING, BEARING UNIT

Solicitation # SPE4A6-27-Q-0084

Solicitation SPE4A6-27-Q-0084 is a firm-fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of one bearing unit housing, NSN 3130-01-497-7438. The required delivery date is 124 days after award, with the item to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. Quotations are due by October 16, 2026, and must be submitted to the issuing office in Richmond, Virginia. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while explicitly prohibiting the use of mercury or mercury compounds in preservation and packing. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA training. Additionally, the contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and may be required to hold CMMC Level 2 certification. Payment will be processed electronically via the Wide Area Workflow system.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS