Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Special Purpose Electrical Cable Assembly Manufacturing

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The contractor is responsible for fabricating assemblies according to P/N 114E7173G01 and TDP Rev A Gen 1 specifications using W7 Blue electrical cable. All deliverables must adhere to strict quality assurance standards per MIL-STD-1916 or ASQ H1331, with packaging requirements meeting MIL-STD-129 and MIL-STD-2073-1E. Compliance requirements for this project include a CMMC Level 2 self-assessment and adherence to the Berry Amendment. The contract falls under NAICS code 331422 and was posted on October 6, 2026, with a response deadline of October 21, 2026. The final objective is the delivery of finished cable assemblies that meet all specified Department of Defense technical and regulatory guidelines.

General Info

Manufacture special electrical cable assemblies meeting DoD technical, quality, and regulatory compliance standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

NAICS

331422 - Copper Wire (except Mechanical) Drawing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX-27-U-0147.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 6

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures special purpose electrical cable assemblies for prime contractors on DLA Weapons Support projects. Fabricates assemblies per P/N 114E7173G01 and TDP Rev A Gen 1 using W7 Blue electrical cable. Performs quality assurance per MIL-STD-1916 or ASQ H1331 and packaging per MIL-STD-129 and MIL-STD-2073-1E. Requires CMMC Level 2 self-assessment and Berry Amendment compliance. Delivers finished cable assemblies.

Similar Contracts

Same NAICS industry code

Sub-tier Supplier for Raw Materials (Metals, Composites)This subcontract, managed by the Defense Logistics Agency under the Department of Defense, focuses on the supply of raw aerospace materials. The scope of work involves providing essential metals and composites, specifically aluminum and titanium, required for the manufacturing of components under a prime contract. The agreement is categorized under NAICS code 331422 and was posted on August 17, 2026. It establishes a sub-tier supplier relationship to ensure the availability of critical raw materials necessary for aerospace production.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Raw Material Supply – Aerospace-Grade Alloy ProcurementThe contract entails the supply of certified aerospace-grade raw materials, including aluminum extrusions and titanium bar stock, to meet stringent military and aerospace standards. All materials must be fully traceable with accompanying mill certifications and strict adherence to AMS and MIL-STD specifications to ensure structural integrity and performance under extreme operational conditions. The procurement is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is categorized under NAICS code 331422, which corresponds to the manufacturing of nonferrous metal rolling, drawing, and extruding. The materials are intended for use in critical defense and aerospace systems where material consistency, quality control, and regulatory compliance are non-negotiable. While the specific delivery location and point of contact are not detailed, the contract is active as of July 21, 2026, and is accessible via the DIBBS system under contract number SPE4A526P2279.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material and Specialty Alloy SupplyThe contract entails the supply of certified aerospace-grade aluminum alloys and specialty materials specifically engineered for use in the fabrication of bomb bay door fairings, requiring full traceability from melt to delivery and strict adherence to MIL-SPEC or AMS industry standards. All materials must meet rigorous military specifications for mechanical properties, chemical composition, and quality assurance to ensure structural integrity and operational reliability in demanding defense applications. The supplier is expected to provide comprehensive documentation, including material certifications, heat bath records, and lot traceability, to support compliance with aerospace and defense manufacturing requirements. This is a subcontract under the Defense Logistics Agency, operating under the Department of Defense, with a NAICS code of 331422 indicating alignment with aluminum rolling, drawing, and extruding industries. The contract was posted on July 21, 2026, and performance is tied to critical defense systems, necessitating strict security, quality control, and delivery protocols. While specific delivery locations and point of contact details are not provided, the work is directly linked to the production of components used in weapon systems, requiring suppliers to maintain accredited quality management systems and demonstrate proven capability in handling sensitive aerospace materials under defense procurement guidelines.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace PlateThe contract entails the supply of high-grade aluminum alloys, specifically 7075-T6 and 2024-T3, meeting stringent aerospace material standards for the fabrication of structural aircraft plates. These materials are critical for ensuring the strength, durability, and weight efficiency required in defense aircraft components. The contract is classified as a subcontract under the NAICS code 331422, indicating it pertains to aluminum and aluminum alloy rolling, forging, extruding, and related manufacturing. The Defense Logistics Agency, operating under the Department of Defense, is the contracting entity responsible for procuring these materials to support defense manufacturing needs. Although specific delivery locations and points of contact are not provided, the performance location is linked to defense-related fabrication activities, consistent with the agency's mission to sustain military readiness. The solicitation was posted on July 21, 2026, and the award is accessible via the DIBBS system under contract number SPE4A526V0727.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Alloy Material SupplyThe contract is for the supply of high-strength aluminum or titanium alloy raw materials in bar, plate, or extrusion form, specifically meeting aerospace-grade specifications such as 7075-T6 aluminum or Ti-6Al-4V titanium. These materials are critical for defense and aerospace applications and must adhere to stringent quality and performance standards required for structural and high-stress components. The contract is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, indicating its role in supporting military and aerospace supply chains. The solicitation was posted on July 21, 2026, and falls under NAICS code 331422, which classifies it within the aluminum and aluminum alloy die casting manufacturing sector. Despite being designated as a subcontract, the materials supplied are essential to larger defense systems and will be used in environments requiring exceptional strength-to-weight ratios and corrosion resistance. The place of performance and point of contact information are not specified, and there is no set-aside designation provided, suggesting this is an open competition among qualified suppliers. The contract award can be accessed via a public DIBBS link associated with the identifier SPE4A724P9830.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace DuctingThe contract pertains to the supply of certified high-grade aluminum or stainless steel sheet stock or formed blanks specifically intended for the fabrication of defense-grade air duct assemblies. All materials must conform strictly to MIL-SPEC and AMS performance and quality standards, ensuring suitability for critical aerospace and defense applications. The materials are to be delivered in sufficient quantities and consistent quality to support ongoing production requirements without compromise to dimensional accuracy, surface finish, or material integrity. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 331422 indicating classification under Other Alumina and Aluminum Production and Processing. The contract was posted on July 21, 2026, and the place of performance and point of contact details are not specified, suggesting the supplier may be responsible for logistics coordination based on defined delivery schedules. Compliance with all technical and regulatory requirements is mandatory, and failure to meet specifications may result in rejection or termination of delivery obligations.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply – Aerospace-Grade Metal or Composite BlanksThe contract entails the supply of aerospace-grade aluminum, titanium, or composite pre-preg materials intended for the fabrication of structural panels, requiring full traceability and certification to meet stringent aerospace and defense standards. All materials must be delivered with documented compliance to applicable specifications, ensuring consistent quality and material integrity throughout the supply chain. The subcontract is issued by the Defense Logistics Agency under the Department of Defense, with the NAICS code 331422 indicating classification within the aluminum rolling, drawing, and extruding industry, though the scope extends to advanced metallic and composite inputs critical for high-performance airframe components. The materials are procured under a subcontract arrangement, with performance obligations expected to align with federal defense procurement guidelines and operational timelines. While specific delivery locations and points of contact are not disclosed, the contract is managed through the DIBBS system and is publicly accessible under award number SPE4A726P3548. The posting date of July 17, 2026, suggests this is a future-dated opportunity reflecting planned procurement activity, likely in support of ongoing or anticipated aerospace programs requiring certified, high-strength blanks for structural assembly applications.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Materials and Component SupplyThe Specialty Materials and Component Supply subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on the procurement of high-grade materials and subcomponents essential for valve production. The scope of work includes the delivery of stainless steel forgings, seals, stems, and actuators that must strictly adhere to established military or industrial specifications. Classified under NAICS code 331422, this agreement ensures the availability of critical hardware necessary for defense-related infrastructure. The contract was posted on June 24, 2026, and is managed through the Defense Logistics Agency to maintain the quality and reliability of specialized components used in government applications.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

HARDWARE KIT, MECHANIC

Solicitation # SPE7LX-27-U-0163

Solicitation SPE7LX-27-U-0163 is an Indefinite Delivery Contract issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of Mechanic Equipment Hardware Kits, specifically NSN 5340-01-692-1583. The contract seeks an estimated quantity of 95 units with a delivery schedule of 114 days after receipt of order. Terms are established as FOB Origin, with inspection and acceptance occurring at the destination. The procurement is governed by NAICS code 332510 and requires strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and a ban on items produced via additive manufacturing. Contractors must comply with rigorous packaging and marking standards, specifically MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, safeguarding covered defense information, and domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. All hazardous materials must be labeled according to the Hazard Communication Standard.

Hardware Manufacturing

POSTED

DEADLINE

STARTER, ENGINE, AIR

Solicitation # SPE7LX-27-U-0173

Solicitation SPE7LX-27-U-0173 is a Total Small Business Set-Aside issued by the DLA Weapons Support Strategic ACO Program Directorate for the procurement of four engine air starters, NSN 2990332058176, part number 5147700.005. This request may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars for a one year period. Quotations are due by October 23, 2026, and will be evaluated based on price and the offeror's ability to meet the delivery schedule. Delivery is required within 112 days after order, with terms set as FOB Origin under the First Destination Transportation program. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific preservation requirements include the use of factory anti-rust grease to protect internal mechanisms and the immobilization of items within containers to prevent damage. Additionally, the contractor must comply with NAVSEA 5100-003D regarding the prohibition of intentionally added mercury. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and compliance with various FAR and DFARS clauses concerning cybersecurity, domestic material restrictions, and the safeguarding of covered defense information. Inspection and acceptance will occur at the destination.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

INSULATION, VEHICULAR

Solicitation # SPE7LX-27-U-0168

Solicitation SPE7LX-27-U-0168 is issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of vehicular insulation, identified by NSN 2510-01-573-9469. This is an Indefinite Delivery Contract for an estimated quantity of 12 units. The delivery timeline is set for 88 days after order, with shipping terms established as FOB Origin and both inspection and acceptance occurring at the destination. The procurement is conducted under the First Destination Transportation program to optimize costs. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Offerors must comply with domestic sourcing regulations, including the Buy American Act and the Berry Amendment, and provide disclosures for any non-domestic materials. Evaluation is primarily based on price, with a specific preference for certified HUBZone small businesses. Additionally, the government will not consider offers utilizing additive manufacturing. Administrative requirements include the use of Wide Area Workflow for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous materials, and labor standards.

Softwood Veneer and Plywood Manufacturing

POSTED

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7LX-27-U-0171

Solicitation SPE7LX-27-U-0171 is a request for quotations issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of linear actuating cylinder assemblies, identified by NSN 3040015483713 and CNH Industrial America LLC part number 113133A2. The government is seeking an estimated quantity of 51 units under a unilateral Simplified Indefinite-Delivery Contract with a performance period of one year. Delivery is required within 256 days after order, with inspection and acceptance occurring at the destination within the continental United States. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Evaluation for award will be based on the price quoted for the estimated annual demand, and submissions must be made via the DIBBS portal.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0161

Solicitation SPE7LX-27-U-0161 is a Request for Quotations issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of seals, identified by NSN 5330-01-134-0058 and ITT Aerospace Controls LLC Part Number 125696A. This effort may result in an Indefinite Delivery Contract for a one-year period with a maximum contract value of 350,000.00 USD. The estimated annual quantity is 219 units, with a guaranteed contract minimum of 32 units and a minimum delivery order quantity of 54 units. Delivery is required within 99 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Specifically, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. The contract prohibits the use of asbestos and requires compliance with the Hazard Communication Standard for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to various DFARS and FAR clauses regarding cybersecurity, domestic material sourcing under the Buy American Act and Berry Amendment, and the prohibition of covered defense telecommunications equipment. Quotations are due by October 23, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

INSULATION, VEHICULAR

Solicitation # SPE7LX-27-U-0159

Solicitation SPE7LX-27-U-0159 is a request for a unilateral Simplified Indefinite-Delivery Contract (SIDC) issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of vehicular cab insulation panels, identified by NSN 2540-01-473-9891. The contract has an estimated annual quantity of 6 units, with a guaranteed minimum of 1 unit and a minimum delivery order quantity of 3 units. The maximum contract value is set at 350,000.00 dollars. Delivery is required within 77 days after order, with shipping terms established as FOB Origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951 and RP001 for palletization. Environmental restrictions strictly prohibit the use of Class I Ozone Depleting Chemicals. Additionally, the offeror must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area WorkFlow system for all invoicing and payment requests. Award will be based on price and the offeror's ability to conform to all specified terms and conditions.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0169

Solicitation SPE7LX-27-U-0169 is a total small business set-aside for the procurement of 26 support hooks, identified as NSN 5340-01-699-0691. This requirement is for a commercial off-the-shelf item from Performance Advantage Company, Inc. (Part Number 1027G). The government intends to award a unilateral simplified indefinite-delivery, fixed-price contract to a responsible offeror based on price quotes submitted via the DIBBS portal. Delivery is required within 32 days after order, with shipping terms established as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically citing RA001. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements.

Hardware Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7LX-27-U-0162

Solicitation SPE7LX-27-U-0162 is a request for a unilateral Simplified Indefinite-Delivery Contract issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of metal tube assemblies. The requirement is for an estimated quantity of 10 units under NSN 4710-01-370-1596 and part number 7-910-011722. Delivery is required within 88 days after receipt of order with shipping terms set as FOB Origin, while both inspection and acceptance will occur at the destination. The government will award the contract to a responsible offeror based on the price quoted for the estimated annual demand, explicitly excluding any offers utilizing additive manufacturing. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, with packaging and marking governed by MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with DLA requirement RP001. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and provide disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. All quotes must be submitted via the DLA Internet Bid Board System.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

PRISM, OPTICAL INSTRUME

Solicitation # SPE7LX-27-U-0160

Solicitation SPE7LX-27-U-0160 is issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of six optical instrument prisms, identified by NSN 6650011188140 and Symetrics Industries Part Number 126614. This item is designated as a critical application item. The procurement may result in a fixed-price Indefinite Delivery Contract (IDC) for a one-year period, with a delivery lead time of 239 days after order. Delivery is FOB Origin, while inspection and acceptance are conducted at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically requiring the delicate instrument special marking code 05. Technical and quality requirements are governed by DLA master list standards RP001, RA001, RQ011, and RQ017. Invoicing must be processed electronically through the Wide Area WorkFlow system. Award evaluation will be based on the price quoted for estimated annual demand, with a preference for HUBZone concerns. Quotations must be submitted via the DLA Internet Bid Board System by October 23, 2026.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

SLIDE, DRAWER, EXTENSION

Solicitation # SPE7LX-27-U-0166

Solicitation SPE7LX-27-U-0166 is issued by the Department of Defense, DLA Weapons Support Strategic Acquisition Program Directorate, for the procurement of one extension drawer slide, identified by NSN 5340-01-359-6854. This is a unilateral Simplified Indefinite-Delivery Contract (SIDC) with a maximum contract value of 3,500,000.00 USD. The delivery requirement is 86 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is conducted under the First Destination Transportation program to optimize shipping costs. This contract carries stringent security and regulatory requirements. Offerors must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified via a C3PAO and comply with DFARS 252.204-7012 for safeguarding covered defense information. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the contract mandates compliance with the Buy American Act and the Berry Amendment, with a specific threshold of 150,000 USD for the latter. Award will be based on the price quoted for estimated annual demand, with a price evaluation preference granted to certified HUBZone small businesses. Packaging must adhere to MIL-STD-129 and ASTM D3951, with specific hazardous material labeling required per 29 CFR 1910.1200 if applicable. All invoicing and payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotations are due by October 23, 2026, to the DLA Weapons Support office in Columbus, Ohio.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0164

Solicitation SPE7LX-27-U-0164 is a fixed-price request for quote issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of five estimated units of a Worm Shaft, NSN 3040011497966. The contract specifies a delivery timeline of 115 days after order with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The procurement is categorized under NAICS code 333613, and the government will award a unilateral Simplified Indefinite-Delivery Contract to a responsible offeror based on the price quoted for the estimated annual demand. The contractor must adhere to strict technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Special restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 23, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

SEAL, NONMETALLIC SPECI

Solicitation # SPE7LX-27-U-0165

Solicitation SPE7LX-27-U-0165 is a Total Small Business Set-Aside issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of 31 nonmetallic special shaped section seals, identified by NSN 5330-01-125-4269. This requirement is classified as a commercial item under NAICS code 339991 and may result in an Indefinite Delivery Contract for a one-year period. Delivery is required within 126 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict material and packaging standards to prevent deterioration from ultraviolet rays, requiring items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. All supplied items must be free of asbestos and Class I ozone depleting chemicals. Marking and identification must comply with MIL-STD-129 and MIL-STD-130N. Additionally, the contractor must adhere to cybersecurity requirements, including CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS