Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Aerospace Packaging Services

Open

Federal

Response Deadline11/13/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Specialized Aerospace Packaging Services involves performing specialized packaging and marking for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the packaging of 17 aircraft formers in accordance with DLA Master List RP001 and marking per MIL-STD-129. Depending on the material, the contractor must apply TQ requirement IP025 for hazardous materials following FED-STD-313 or utilize ASTM D3951 for non-hazardous materials. The project will be performed at Tinker AFB, Oklahoma, under NAICS code 488510. A critical requirement for this contract is that the provider must hold a hazardous materials shipping certification to ensure all safety and regulatory standards are met. The final deliverable consists of 17 packaged and labeled aircraft formers that are fully prepared for shipment.

General Info

Packaging and marking 17 aircraft formers at Tinker AFB requiring hazardous materials certification.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2731.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FORMER, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 11:00:00 AM CSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking for prime contractors on DLA Weapons Support ASC projects. Packages components per DLA Master List RP001 and marks items per MIL-STD-129. Applies TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous materials. Requires hazardous materials shipping certification. Delivers 17 packaged and labeled aircraft formers ready for shipment.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging, preservation, and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires the packaging of three units in strict accordance with MIL-STD-2073-1E using preservation material 49 and wrap material GB, with labeling performed per MIL-STD-129. The project is designated as a FOB Origin shipment destined for DLA Distribution DDSP New Cumberland. Interested parties should note the response deadline of November 16, 2026, and the associated NAICS code 488510 for these specialized logistics and packaging services.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract opportunity is for the provision of military-grade packaging and labeling services to support prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will be responsible for supplying all necessary packaging materials and performing final packing and marking for 31 ball joints. All work must be executed in strict accordance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with delivery handled on an FOB Origin basis. The project is designated as a Total Small Business Set-Aside under NAICS code 488510 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must possess specialized expertise in DLA packaging and marking standards to ensure compliance with all military specifications.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

First Destination Transportation (FDT) Freight ServicesThe First Destination Transportation Freight Services subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the transportation of fluid handling hardware for prime contractors. The selected provider is responsible for coordinating pickups from suppliers on an FOB Origin basis and managing the entire transit process to the final government destination. Key operational requirements include the mandatory use of U.S.-flag vessels for all ocean transport and the provision of comprehensive freight documentation, specifically detailing the gross weight and port of loading. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 488510.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of non-hazardous materials according to ASTM D3951 and the marking of all packaging in compliance with MIL-STD-129. Additionally, the provider must execute palletization following RP001 DLA Packaging Requirements and ensure all hazardous materials meet TQ Requirement IP025. The final deliverables must be shipment ready for FOB Origin transport to the DDSP in New Cumberland. This effort falls under NAICS code 488510 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Aircraft ComponentsThis subcontract involves providing specialized MIL-SPEC packaging and marking services for aircraft structural components supporting DLA Aviation supply contracts. The scope of work requires strict adherence to MIL-STD-129 and ASTM D3951 for labeling and packing, with palletization executed according to RP001 DLA Packaging Requirements. To maintain component integrity during transit, the contractor must utilize MIL-SPEC crates and specialized moisture barriers. The project entails the processing of 21 units, which are to be packed and labeled for FOB Destination shipment. Managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, the performance of these services is located in zip code 95304-5000. The solicitation was posted on November 6, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and LabelingThis subcontract opportunity, titled Military-Grade Packaging and Labeling, involves providing specialized packaging and preparation services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will be responsible for packaging critical application hardware according to ASTM D3951 standards and ensuring all labeling and marking comply with MIL-STD-129 using approved systems. The final deliverable consists of shipping-ready containers that meet all DLA packaging and marking requirements. The project will be performed in New Cumberland, Pennsylvania, under NAICS code 488510. Interested parties should note that the solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Temperature-Controlled International Medical FreightThis subcontract for Temperature-Controlled International Medical Freight involves the transport and delivery of temperature-sensitive medical supplies for prime contractors supporting DLA Troop Support Medical Supply Chain Pharm FSA projects. The scope of work requires hauling materials FOB Destination to the USA Med Mat Ctr EUR located in Kaiserslautern, Germany. To ensure product integrity, the contractor must utilize cold chain logistics to maintain a USP controlled room temperature between 20 and 25 degrees Celsius. Compliance with strict packaging and labeling standards is mandatory, specifically adhering to MIL-STD-2073-1E and Medical Marking Standard No. 1. The contractor is responsible for ensuring all products are delivered in the required condition. This opportunity falls under NAICS code 488510 and is managed by the Department of Defense.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Secure Shipping ServicesThis subcontract involves the provision of specialized packaging, marking, and shipping services for prime contractors supporting the DLA Weapons Support Active Devices Division. The scope of work requires the secure delivery of 16 units to a designated inspection point in New Cumberland, Pennsylvania. All services must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. To ensure security, the contractor must implement Protected Cargo protocols by omitting nomenclature from all containers. Preservation materials must be applied in accordance with QUP:001 and PRES MTHD:41. This requirement falls under NAICS code 488510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Active Devices Division. The scope of work focuses on the handling of sensitive electronic components, requiring strict adherence to MIL-STD-2073-1E and MIL-DTL-19491 for packaging, and MIL-STD-129 and IPC/JEDEC J-STD-609 for marking. All shipments must utilize approved MIL-SPEC preservation and cushioning materials to ensure components are fully prepared for delivery to DLA Distribution Warner Robins. The project is categorized under NAICS code 488510 and will be performed at Robins Air Force Base. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 6, 2026. The primary objective is to deliver fully compliant, ready-to-ship packages that meet all rigorous military specifications for sensitive electronic hardware.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract for MIL-SPEC Packaging and Logistics Services involves providing packaging materials and performing packing and marking services for prime contractors supporting DLA supply contracts. The scope of work requires the delivery of three packaged and marked flanges to DLA Distribution DDSP New Cumberland. All activities must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, specifically utilizing Pack Code U and preservation method MTHD:31. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the contract falls under NAICS code 488510. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 10, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging, marking, and palletization services for electronic components, specifically resistors, to support the DLA Weapons Support Active Devices Division. The contractor is responsible for ensuring all deliverables are shipping-ready and fully compliant with strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. These tasks require the use of specialized MIL-SPEC materials and equipment to meet Department of Defense requirements. The final products are to be delivered to the Aviation Support Detachment located in Fort Worth, Texas. This opportunity falls under NAICS code 488510 and is managed through the DLA Weapons Support Active Devices Division. Interested parties should note the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging and logistics for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires packaging hardware in strict accordance with MIL-STD-2073-1E and DLA RP001, applying necessary markings per MIL-STD-129, and managing FOB Origin shipping through the First Destination Transportation program. The final deliverables include properly packaged transmitters and all required shipping documentation. The project is managed under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 13, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Special Purpose Electrical Cable Assembly SupplyThis subcontract involves the manufacture or procurement of six special purpose electrical cable assemblies matching NSN 5995015840982 for the DLA Weapons Support ASC Supplier Oper OEM Division. The project requires strict adherence to MIL-STD-129 marking standards and First Destination Transportation delivery requirements, with performance taking place in San Diego. To be eligible, the provider must maintain NIST SP 800-171 cybersecurity compliance and provide certification against the use of prohibited telecommunications equipment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Dial Indicating Pressure GagesThis subcontract involves the supply of 25 dial indicating pressure gages for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing or sourcing gages that strictly adhere to NSN 6685014410843 specifications, ensuring all units are mercury-free per IP056 certification. Operational requirements include cleaning according to MIL-G-18997E and packaging in compliance with MIL-STD-2073-1E and RP001. Additionally, all items must be marked per MIL-STD-129 using Special Marking Code 05. The work is associated with NAICS code 334514 and will be performed in New Cumberland.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supplier of Temperature Indicating Controls (NSN 6685015018697)This subcontract involves the supply of four Temperature Indicating Controls under NSN 6685015018697 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to mercury restrictions and meets rigorous quality assurance standards per MIL-STD-1916 or ASQ H1331. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The contract specifies FOB Origin delivery to DLA Distribution DDSP in New Cumberland, Pennsylvania. Operating under NAICS code 334511, the agreement requires the delivery of these specialized controls to support prime contractors fulfilling DLA supply requirements. The response deadline for this opportunity is November 13, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

Hardware Manufacturing

POSTED

about 10 hours ago

DEADLINE

Dial Window Manufacturing and SupplyThis subcontract involves the manufacture and supply of 13 dial windows, specifically NSN 5355-00-392087-1, for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor must produce these units according to technical data provided via the DLA portal, ensuring all materials are of domestic origin. Quality control and logistics are strictly governed by military standards, requiring sampling plans per MIL-STD-1916 or ASQ H1331 Table 1 and packaging in accordance with MIL-STD-2073-1E. The final delivery of the packaged and marked units is to be made to the government destination at Hill AFB.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Time Totalizing Meter Manufacturer/SupplierThis subcontract involves the supply of eight time totalizing meters for prime contractors working on DLA Weapons Support ASC projects. The supplier must provide meters that meet NSN 6645-01-486-1030 and adhere strictly to RA001 quality requirements and RQ025 mercury prohibitions. All items must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards, with quality assurance inspections conducted per MIL-STD-1916 or ASQ H1331. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Operator OEM Division. Delivery of the compliant meters is required FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The procurement falls under NAICS code 334517.

Irradiation Apparatus Manufacturing

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)This subcontract involves the manufacture of straight headed pins under NSN 5315-0119-17595 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor must utilize precision machining and forming equipment to fabricate the pins and ensure strict adherence to quality control and sampling standards per MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act is mandatory, and the provider must hold either SAE AS9003 or ISO 9001 certification. The scope of work requires the delivery of five finished pins FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 332510 and was posted by the DLA Weapons Support ASC Supplier OEM Division. Interested parties must submit their responses by November 13, 2026.

Hardware Manufacturing

POSTED

about 10 hours ago

DEADLINE

Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 10 hours ago

DEADLINE

Manufacturing and Supply of Electrical Rotating Equipment End BellsThis subcontract involves the manufacturing and supply of five specialized End Bell components for electrical rotating equipment to support DLA supply contracts. The work must be performed in accordance with the DLA Master List of Technical and Quality Requirements, with all quality inspections conducted under an ISO 9001:2015 certified system. Final products must be packaged and labeled according to ASTM D3951 and MIL-STD-129 standards. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance located in San Diego. Compliance requirements include a CMMC Level 2 self-assessment and adherence to Buy American regulations. The response deadline for this opportunity is November 13, 2026.

Motor and Generator Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Electrical Component (NSN 6635016988852)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the provision of one unit of electrical component NSN 6635016988852. The contractor is responsible for manufacturing or sourcing the item in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026. The contract mandates rigorous adherence to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must follow MIL-STD-105/ASQ Z1.4, with a requirement for zero non-conformances. Additionally, the provider must ensure full compliance with the Buy American Act and meet NIST SP 800-171 cybersecurity assessment standards.

Analytical Laboratory Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Drip Pans (NSN 1660-01-727-3480)This subcontract involves the supply of five drip pans, identified by NSN 1660-01-727-3480, for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Order OEM Division. The selected provider must source exact products based on specific CAGE codes and part numbers, providing formal verification of their status as an authorized manufacturer or dealership. All items must be packaged according to MIL-STD-2073-1E standards and delivered FOB Destination. The contract operates under NAICS code 423830 and requires adherence to DFARS 252.215-7013 regulations regarding nontraditional defense contractors. Performance will take place in zip code 73145-8000, with a response deadline set for November 12, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

MIL-SPEC Packaging and Palletization Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Services

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Shipping Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Labeling Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Military-Spec Packaging and Marking Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Crating Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Military-Grade Packaging and Shipping Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Aerospace Component Packaging and Shipping

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Aerospace Packaging Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS