This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Specialized Aerospace Testing & Evaluation

Closed

Federal

Submission Closed10/03/2026, 05:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps Center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the Gymnasium (approximately 600 square feet) and the Warehouse and Storage areas (approximately 3,600 square feet combined). All activities must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested offerors must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification form, proof of insurance, and three references for similar projects by October 21, 2026, at 3:00 PM CT. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination SCA 2015-5019 Rev 31, and includes various FAR clauses regarding small business utilization, labor standards, and information security. Invoicing is to be submitted on a weekly or bi-weekly basis.

POSTED

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform First Article Testing for prime contractors, specifically conducting validation testing on one unit of NSN 1670-01-441-8630. This process requires the use of precision measurement equipment and CMM, with close coordination alongside Government Quality Assurance Representatives. The project is based in Tracy, California, under NAICS code 541380. A primary deliverable is a comprehensive First Article Test Report, which must be submitted within 60 days. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) and Validation ServicesThis subcontract for First Article Testing and Validation Services supports prime contractors on DLA Weapons Support ASC projects. The primary objective is to validate aircraft access covers by verifying material properties, finish, and dimensions against the Technical Data Package using certified metrology equipment. The final deliverable for this effort is a completed First Article Test Certification report. The work is performed in San Diego, California, under NAICS code 541380 for the Department of Defense. Due to the handling of ITAR-controlled technical data, the contractor must maintain JCP certification. Interested parties should note the response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Quality Assurance & Inspection ServicesThis subcontract for Aerospace Quality Assurance and Inspection Services supports prime contractors on DLA Weapons Support ASC projects at Robins Air Force Base. The selected provider will perform independent inspection and verification tasks, executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards with zero-based sampling for critical, major, and minor attributes. All work must be performed using NIST-calibrated Measuring and Test Equipment in accordance with requirement RT001, and the contractor is required to deliver detailed inspection reports and certifications of conformance. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. A critical security requirement for this engagement is CMMC Level 2 compliance. Interested parties should note the response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Piston Tube Assembly Testing and Quality ValidationThis subcontract for Piston Tube Assembly Testing and Quality Validation supports Navsup Weapon Systems Support Philadelphia projects. The selected provider will be responsible for performing final acceptance testing, quality validation, and performance tests for prime contractors, including conducting re-test procedures following repairs and generating all necessary acceptance test data. To qualify, the contractor must hold ISO 9001 or SAE AS9100 certification and coordinate closely with Government Source Inspection. Key deliverables include certified test reports and signed-off RFI status. The response deadline for this opportunity is November 6, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Load Cell and Crosshead Verification ServicesThis subcontract for the NASA Shared Services Center involves providing high-precision verification services for force, speed, and displacement to support prime contractors. The scope of work focuses on enhanced load cell force verification ranging from 0 to 300 kN in both tension and compression, as well as the verification of crosshead speed and displacement. All activities must be performed using precision calibration equipment in strict accordance with ASTM E2658 and ASTM E2309 standards. The selected provider is responsible for delivering detailed calibration and verification reports that certify full compliance with these industry standards.

NASA Shared Services Center

POSTED

DEADLINE

NDI and First Article Qualification TestingThis subcontract involves providing non-destructive inspection and qualification testing for F100 injector assemblies on DLA Aviation projects. The selected contractor will perform inspections according to LPF-QAR-003 and specific technical drawings, utilizing X-ray, Magnetic Particle, or Dye Penetrant equipment. The scope of work includes conducting destructive testing on First Article parts and delivering certified Test and Inspection Reports in compliance with DI-NDT1-80809B/T. To be eligible, the contractor must hold OEM or CEA facility certification. This opportunity is managed by the Department of Defense through DLA Aviation at Oklahoma City under NAICS code 541380. The response deadline for this requirement is November 6, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

High-Capacity Load Bank TestingThis subcontract involves the supply and operation of high-capacity load banks for prime contractors working on Department of Veterans Affairs projects at the Cincinnati VAMC facility. The scope of work requires the deployment of equipment capable of a 125 percent load to test two 1500kW generators with specifications of 3 PH, 4W, 480Y/277V, while verifying the performance of paralleling switchgear under load. The contractor is responsible for the mobilization of heavy testing equipment to the site during weekends and must provide comprehensive load test results and performance reports upon completion. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Veterans Affairs Network Contract Office 10.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Specialized Test Equipment ProviderThis subcontract opportunity with DLA Land At Aberdeen involves the development and provision of specialized test equipment for prime contractors supporting PATRIOT Missile Defense System projects. The selected provider will be responsible for identifying and delivering diagnostic hardware specifically designed to validate Diesel Engine Governor components against strict technical requirements. Final deliverables include validated test reports or the specialized test equipment itself. The project will be performed at Aberdeen Proving Ground and requires a partner with demonstrated experience in testing high-complexity military engine components. Interested parties must respond by October 14, 2026, under NAICS code 541380.

POSTED

DEADLINE

Hull Inspection and NDTThis subcontract opportunity, titled Hull Inspection and NDT, is issued by the Department of Homeland Security under agency CG-SEA-CA3. The project involves providing technical inspections and non-destructive testing for prime contractors working on US Coast Guard vessel projects. Key technical requirements include performing ultrasonic testing of hull plating and conducting destructive cross-sectioning according to ASTM D4138 standards to accurately measure dry film thickness. Qualified contractors must possess NDT Level II/III certification and are responsible for delivering comprehensive inspection reports and thickness measurement logs. This opportunity is designated as a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on October 7, 2026, with a response deadline of November 9, 2026.

POSTED

DEADLINE

Potable Water Sampling and Laboratory TestingThis subcontract opportunity, titled Potable Water Sampling and Laboratory Testing, involves performing annual water sampling and laboratory analysis for storage tanks on Army facility projects at Fort Wainwright. The selected contractor will support prime contractors by collecting samples to test for biological contaminants and chlorination levels, ensuring all potable water meets established environmental health standards. The scope of work requires the use of specialized sampling kits and laboratory equipment to produce necessary water quality test reports and certifications. Managed by the Department of Defense under the 0413 Aq Hq Rco-Ak Wainwrig agency, this project is designated as a Total Small Business Set Aside under NAICS code 541380. The solicitation was posted on October 7, 2026, with a response deadline of October 22, 2026. All performance activities will take place on-site at Fort Wainwright.

0413 Aq Hq Rco-Ak Wainwrig

POSTED

DEADLINE

Non-Magnetic Inspection and Quality TestingThis subcontract for Non-Magnetic Inspection and Quality Testing supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves performing specialized non-magnetic inspections and production lot testing for cable assemblies, ensuring all processes adhere to MIL-DTL-19595 standards. The selected provider will utilize specialized non-magnetic testing and measurement equipment to verify quality and compliance. The primary deliverables for this engagement include the delivery of inspected cable assemblies and the provision of certified test reports required for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for November 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 30 days

AI Contract Overview

The Specialized Aerospace Testing and Evaluation subcontract, posted by the Department of Defense under the Ut DLA Aviation At Ogden, focuses on providing independent quality performance and environmental evaluations for prime contractors on government aerospace projects. The scope of work involves conducting mechanical and environmental stress testing to verify the form, fit, and function compatibility of components with weapon systems. Using precision measurement tools and environmental test chambers, the contractor is responsible for producing data and delivering comprehensive test reports and verification data acceptable to 416 SCMS/GUEAA. This opportunity falls under NAICS code 541380, with a response deadline set for October 3, 2026.

General Info

DoD subcontract for aerospace quality performance and environmental testing, deadline October 3, 2026.

Agency

Department Of Defense → Ut DLA Aviation At Ogden

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of SPRHA4-26-R-0922.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

F-16 WING ASSEMBLY, AIRCR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineOct 3

Deadline has passed

Submission Closed

10/03/2026, 05:59:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Ut DLA Aviation At Ogden

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ut DLA Aviation At Ogden

Office AddressN/A

ContactsNo contact information available

Full Description

Performs independent quality performance and environmental evaluations for prime contractors on government aerospace projects. Conducts mechanical and environmental stress testing and verifies form, fit, and function compatibility with the weapon system. Uses environmental test chambers and precision measurement tools to produce data acceptable to 416 SCMS/GUEAA. Delivers test reports and verification data.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS