Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Exterior Accessories (Step/Hitch)

Open

International

Response Deadline12/01/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and installation of removable exterior access steps for prime contractors working on Royal Canadian Mounted Police Mobile Command Vehicle projects. The required equipment consists of a unit step featuring a seven inch wide safety grip, which must be securely attached to the vehicle via a rail hitch receiver to ensure safe and reliable access. The project is managed by the Government of Canada for the Royal Canadian Mounted Police, with performance taking place in Chilliwack, British Columbia. Interested parties must respond by the deadline of December 1, 2026, for this specialized exterior accessory procurement categorized under NAICS code 336390.

General Info

Supply and install removable exterior access steps for RCMP vehicles in Chilliwack, BC.

Agency

Government of Canada → Royal Canadian Mounted Police

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

Canada, British Columbia, Chilliwack, CAN

Set-Aside

NONE

Documents

This scope was carved out of 202702388/A.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Ford Transit Van Fit-Up

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineDec 1

Submission deadline

Response Deadline

12/01/2026, 09:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Royal Canadian Mounted Police

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Royal Canadian Mounted Police

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs a removable exterior access step for prime contractors on RCMP Mobile Command Vehicle projects. Supplies a unit step with a 7” wide safety grip and attaches the unit via a rail hitch receiver. Delivers a securely attached, removable vehicle access step.

Similar Contracts

Same NAICS industry code

Air Conditioning/Heating Duct Assembly FabricationThis subcontract involves the fabrication and supply of 20 specialized air conditioning and heating rear V duct assemblies for the Defense Logistics Agency under the Department of Defense. The selected manufacturer must produce the components according to specific technical drawings for NSN 2540016114216 and perform the work in New Cumberland. This opportunity is designated as a total small business set-aside under NAICS code 336390. Strict compliance with quality and environmental standards is required, including the maintenance of an ISO 9001:2015 quality system and adherence to MIL-STD-129 marking requirements. The contractor must ensure that no Class I ozone depleting chemicals are utilized and must comply with DFARS 252.223-7008 regulations regarding the use of Hexavalent Chromium. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 12 hours ago

DEADLINE

Vehicular Seat Cover Supplier (NSN 2540015539421)This subcontract involves the supply of six finished vehicular seat covers for the Department of Defense, specifically supporting DLA Weapons Support projects. The supplier is responsible for manufacturing or sourcing covers that adhere to Part Number 41550512 specifications for Tadano America Corporation equipment. All textiles must maintain strict Berry Amendment compliance, and packaging must be executed according to MIL-STD-2073-1E and MIL-STD-129 standards. The deliverables are to be shipped FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. This procurement falls under NAICS code 336390 and is managed by the DLA Weapons Support LSO Combat Vehicles and Armament. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 12 hours ago

DEADLINE

Friction Clutch Assembly Manufacturing and SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles, requires the manufacture or procurement of 74 friction clutch assemblies. The assemblies must strictly adhere to NSN 2520014112749 and comply with DLA Master List quality standards and TQ requirement IP025. Additionally, the contractor is responsible for ensuring all units are marked and labeled according to MIL-STD-129 and palletized per RP001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336390, with the place of performance located in Texarkana, Texas. Interested parties must have submitted their responses by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 12 hours ago

DEADLINE

Supplier of Vehicular Wheel Hub (NSN 2530-01-654-7023)This subcontract involves the manufacture or procurement of one vehicular wheel hub, identified by NSN 2530-01-654-7023 and Part Number 008-430-03, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support Land Supply Chain ESOC Buys, requires that the component meets Critical Application Item quality standards, adheres to the DLA Master List (RA001) requirements, and conforms strictly to OEM material specifications. The agreement mandates full compliance with the Buy American and Balance of Payments Program. Interested parties must respond by November 11, 2026, for this requirement categorized under NAICS code 336390. The final deliverable is the completed wheel hub meeting all specified technical and regulatory criteria.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

Vehicular Component Bracket SupplierThis subcontract involves the manufacture or procurement of 105 vehicular component brackets for prime contractors supporting DLA supply contracts. The components must strictly adhere to NSN 2590016860126 and Part Number Y000868 from Detroit Defense, Inc., with all quality assurance and inspection processes following the DLA Technical and Quality Master List of Requirements. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, the contract utilizes the First Destination Transportation program for delivery coordination. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336390. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

Supply of Vehicular Fenders (NSN 2510-01-421-6759)This subcontract involves the supply of 18 vehicular fenders for prime contractors supporting DLA supply contracts. The contractor is responsible for manufacturing or sourcing parts that strictly adhere to NSN 2510-01-421-6759 specifications. Performance of the contract requires strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-1916 or ASQ H1331 for sampling and inspection. The agreement is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support, with the place of performance located in Anniston. Compliance with DFARS 252.225-7001 is mandatory, and the use of Class I Ozone Depleting Chemicals is strictly prohibited. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336390.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

Engine Vibration Dampener ManufacturingThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture and supply of 98 engine vibration dampeners for General Motors 6.5 Liter Diesel Engines. The units must be fabricated according to NSN 2815014112138 specifications and meet DLA quality requirement RA001. Notably, the use of additive manufacturing is strictly prohibited for this project. The contract is designated as a Total Small Business Set-Aside under NAICS code 336390, with performance taking place in Tracy, California. Compliance with DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program is mandatory. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Ignition Distribution Cap SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency, requires the supply of 18 ignition distribution caps for critical applications. The required parts must match NSN 2920016112736 and Part Number 0117 2542 from Vincorion LLC or Deutz AG. All items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania and must adhere to ASTM D3951 and MIL-STD-129 packaging standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 336390. Compliance with the Buy American Act and prohibitions regarding hexavalent chromium is mandatory. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

Vehicular Wheel Hub Supplier (NSN 2530-01-654-7023)This subcontract involves the supply of one vehicular wheel hub, part number 008-430-03, sourced from Brothers Body and Equipment, LLC for the DLA Weapons Support Land Supply Chain. The item is identified by NSN 2530-01-654-7023 and must be delivered as a completed unit. All shipments are designated as FOB Origin and must adhere to ASTM D3951 and MIL-STD-129 packaging standards. The contract requires strict compliance with DFARS 252.204-7012 and the provision of Buy American certifications. Managed under NAICS code 336390 for the Department of Defense, the performance of this contract is centered in zip code 29904. Interested parties must have responded by the deadline of November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

Supplier of Steering Tie Rod Ends (Male End)This subcontract involves the supply of 28 specialized male steering tie rod ends for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. The supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 2530011583196 and the DLA Master List of Technical and Quality Requirements RA001, utilizing precision machining and rigorous quality control to ensure all military technical standards are met. The project falls under NAICS code 336390 and is managed by the Department of Defense. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 12 hours ago

DEADLINE

Supply of Vehicular Fender Liners (Aluminum Skirts)This subcontract involves the manufacture or sourcing of 130 aluminum vehicular fender liners and skirts under NSN 2510014989350 for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. The project requires strict adherence to packaging and labeling standards, specifically requiring products to be heat-sealed in barrier bags and boxed according to RP001, MIL-STD-2073-1E, and MIL-STD-129. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336390. To be eligible, the provider must maintain ITAR and EAR compliance and undergo a NIST SP 800-171 assessment to ensure proper cybersecurity standards are met. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

Vehicular Clutch Disk Supply

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 12 hours ago

DEADLINE

More opportunities from Government of Canada → Royal Canadian Mounted Police

Same awarding agency

Interior Lining, Insulation & FlooringThis subcontract involves the supply and installation of interior wall, ceiling, and floor coverings for RCMP Mobile Command Vehicle projects. The scope of work includes the installation of white insulating noise-reduction lining utilizing 3/8 inch plywood and 3/16 inch FRP or aluminum, along with 3/4 inch molded non-slip vinyl sub-flooring, diamond-plate aluminum threshold plates, and flush-mounted E-Track rails. The final deliverable is a completed interior shell and flooring system. The project is managed under the Government of Canada for the Royal Canadian Mounted Police, with performance taking place in Chilliwack, British Columbia. Interested parties must respond by December 1, 2026. The contract is categorized under NAICS code 238310, focusing on specialized interior finishing for these specialized mobile units.

Drywall and Insulation Contractors

POSTED

about 24 hours ago

DEADLINE

Vehicle Electrical Systems & Power DistributionThis subcontract for the Royal Canadian Mounted Police involves the installation of AC/DC power systems and interior lighting for Mobile Command Vehicle projects. The scope of work includes the installation of LED ceiling light panels, power outlets, and two weather-resistant exterior breakout connection ports, as well as the integration of these systems with radio wiring and emergency equipment. The project is located in Chilliwack, British Columbia, and requires the delivery of a certified electrical system. All work must be performed in strict compliance with the Canadian Electrical Code and Electrical Safety Authority standards. The response deadline for this opportunity is December 1, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 24 hours ago

DEADLINE

Specialized Vehicle Interior Cabinetry & MillworkThis subcontract for the Royal Canadian Mounted Police involves the fabrication and installation of specialized interior cabinetry and millwork for Mobile Command Vehicle projects. The scope of work requires the production of custom aluminum overhead storage cabinets featuring gas spring doors, a street-side worktable equipped with lockable trigger-latched drawers, and a full-height floor-to-ceiling storage cabinet. Additionally, the contractor is responsible for installing a collapsible worktable on the passenger side to complete the interior workspace. The project will be performed in Chilliwack, British Columbia, under NAICS code 321918. The contract is structured as a subcontract for prime contractors, with a response deadline set for December 1, 2026. The final deliverable consists of fully installed interior cabinetry and workstations tailored to the specific operational needs of the government agency.

Other Millwork (including Flooring)

POSTED

about 24 hours ago

DEADLINE

Ford Transit Van Fit-Up

Solicitation # 202702388/A

The Royal Canadian Mounted Police (RCMP) is soliciting bids for the up-fit of four Ford Transit 250 AWD High Roof, Sliding Door vehicles to be used as Mobile Command Vehicles. The project is located in Chilliwack, British Columbia, with the RCMP responsible for transporting the vehicles to and from the contractor's facility. The contract spans one year from the award date, and the completed vehicles must be delivered within 90 days of the contract effective date. Selection is based on the lowest evaluated price among responsive bids, with a mandatory requirement for bidders to provide at least three references for similar vehicle up-fits completed within the last five years. This procurement is a conditional set-aside under the Procurement Strategy for Indigenous Business (PSIB), meaning competition may be limited to certified Indigenous businesses if two or more compliant bids are received. Contractors must adhere to strict safety and technical standards, including National Canadian Motor Vehicle Safety Standards and certifications from the Canadian Electrical Code and Electrical Safety Authority. The contract includes specific warranty requirements: ten years for the truck body, five years for electrical wiring, and two years for paint and subcomponents. Additionally, the contractor must comply with green procurement policies regarding environmentally preferable packaging and maintain a minimum of $2,000,000 in insurance coverage.

Motor Vehicle Body Manufacturing

POSTED

about 24 hours ago

DEADLINE

Conducted Energy Weapon (CEW) Testing

Solicitation # 202604988/C

The Royal Canadian Mounted Police (RCMP) is seeking a National Individual Standing Offer (NISO) for the electronic testing of TASER 7 Conducted Energy Weapons (CEWs). The anticipated start date is January 4, 2027, with an initial term of five years and three optional one-year extensions. This solicitation is open exclusively to Canadian suppliers and those from applicable trading partners. Selection is based on mandatory technical criteria, and the responsive offer with the lowest evaluated price will be recommended for award. The scope of work involves testing approximately 2,500 CEWs annually, with a required turnaround time of ten business days from receipt. All testing must adhere to Axon Enterprise, Inc. electrical output specifications and the Firearms Act and Regulations. Contractors are required to provide monthly reports in Excel format, including an executive summary and detailed test pages completed by an approved Electrical Engineer. Strict security and confidentiality protocols are in place, including mandatory security clearances for personnel, physical security assessments of work sites, and specific packaging requirements. To maintain confidentiality, shipments must be sent in opaque, sealed containers without markings indicating the contents are weapons, and documentation must identify the items only as machine tools or machine parts. All CEWs must be shipped without battery packs, and live cartridges are strictly prohibited from being packaged or shipped with the devices.

Testing Laboratories and Services

POSTED

about 24 hours ago

DEADLINE

General Commercial Construction Sub-tradesThis subcontract opportunity is for the provision of general commercial construction sub-trade services for the Royal Canadian Mounted Police in Saskatchewan, Canada. The selected provider will perform specialized installations for prime contractors, ensuring all work adheres to Canadian Content and Canadian Value-Added policies. To be eligible, contractors must provide a Workers Compensation Board letter of good standing and possess either a Certificate of Recognition or a Registered Safety Plan. The response deadline for this solicitation is December 9, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Psychologist Services - Newfoundland and Labrador

Solicitation # M1000-7-1006

The Royal Canadian Mounted Police (RCMP) are seeking a Registered Psychologist to provide professional services in St. John's, Newfoundland and Labrador. The contract is for a single individual to work approximately 25 hours per week on a fully on-site basis. The initial term is for one year, with an irrevocable option for the government to extend the agreement for up to two additional one-year periods. The primary scope of work involves supporting the RCMP Occupational Health Services mission through the design and delivery of psychology workshops on topics such as suicide prevention and stress management, collaborating on disability case management and return-to-work programs, and assisting in the development of B Division psychological services policy. To be eligible, the candidate must be registered with the Newfoundland and Labrador Psychology Board, hold at least a Master's degree in Psychology, and possess a minimum of five years of post-university clinical experience. Additionally, the resource must have at least 30 months of experience within the last five years in an occupational health setting specifically serving policing, military, or safety-sensitive first responders. Due to the nature of the work, the successful candidate must obtain RCMP Enhanced Reliability Status with Top Secret security clearance before the contract award and maintain valid medical malpractice liability insurance. Selection is based on a weighted evaluation consisting of 60% technical merit and 40% price. Technical scoring is based on a 30-point scale evaluating experience in occupational health for first responders, disability case management, and professional qualifications. This solicitation is open only to Canadian suppliers under the Policy on Reciprocal Procurement. Bids must be submitted in three separate PDF sections covering technical, financial, and certification requirements, with a total email size not exceeding 5MB.

Offices of Mental Health Practitioners (except Physicians)

POSTED

DEADLINE

Modular Building Project – Dillon, Saskatchewan

Solicitation # M5000-26-2255/A

The Royal Canadian Mounted Police is soliciting full construction services for a modular building project at an existing site in Dillon, Saskatchewan, with a completion deadline of March 31, 2029. The scope of work includes the construction of an 800 square meter single-storey wood-framed modular building featuring office space, a garage, and contained use areas, as well as a separate 75 square meter wood-framed garage. The project encompasses the installation of structural, mechanical, and electrical systems with emergency backup power, a lift station, and a self-contained solar photovoltaic system. Site development requirements include underground services, grading, signage, lighting, and granular surfacing. This procurement is structured as a two-phase competition open exclusively to Canadian suppliers. Phase One is a Request for Qualifications focusing on bidder experience and mandatory requirements, while Phase Two will invite pre-qualified bidders to submit financial bids based on detailed specifications and drawings. The contract will be awarded to the lowest-priced compliant bid. Key requirements include security clearances, performance and labour and material payment bonds, and adherence to the Occupational Health and Safety Act of Saskatchewan. The project also emphasizes Indigenous participation and prioritizes Canadian content. Bids for the first phase must be submitted via email by December 9, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Canine Hydrotherapy Pool Underwater Treadmill

Solicitation # M5000-27-01501/A

The Royal Canadian Mounted Police is soliciting bids for the supply, delivery, installation, commissioning, and training for one canine hydrotherapy pool and underwater treadmill system, including a water storage tank cover. Located in Innisfail, Alberta, this equipment will be used for the rehabilitation, conditioning, and fitness maintenance of Police Service Dogs. The system must meet specific technical requirements, including electrical specifications of 220V–240V, 20–50 Amp, 50-60 Hz, and the capability to utilize a cold-water source. All deliverables must be received by March 31, 2027, with specific training or deliverables due within three months of the contract award. This firm-price contract is open to Canadian suppliers and applicable trading partners under the Reciprocal Procurement Policy. The award will be granted to the responsive bid with the lowest evaluated price, following a technical evaluation to ensure all mandatory criteria are met. Bidders must submit their proposals electronically by November 24, 2026, ensuring that financial information is kept separate from technical documents. Delivery is required Delivered Duty Paid to Innisfail, Alberta, and the contractor is encouraged to use reusable, returnable, or recyclable packaging in accordance with green procurement directives.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Heavy Equipment Shipping and FreightThis subcontract for Heavy Equipment Shipping and Freight involves the transportation of a hydrotherapy system and associated accessories weighing over 4,000 lbs for the Royal Canadian Mounted Police Dog Service Training Centre. The selected provider will support prime contractors by utilizing heavy-duty transport vehicles and specialized rigging equipment to ensure the safe delivery and unloading of the equipment at the designated facility in Innisfail, Canada. The opportunity was posted on November 2, 2026, with a response deadline of November 24, 2026. Operating under NAICS code 484220, this project is managed through the Government of Canada to facilitate essential infrastructure needs for the PDSTC location.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Water Storage Tank Cover SupplyThis subcontract involves the manufacture and delivery of one specialized water storage tank cover for the Royal Canadian Mounted Police Dog Service Training Centre in Innisfail, Canada. The cover must be compatible with a specific hydrotherapy system model and constructed from durable, water-resistant materials designed to withstand wet environments. The project is managed under the Government of Canada and falls under NAICS code 337920. Interested parties must respond by November 24, 2026, to provide these supplies to the prime contractors overseeing the facility projects.

Blind and Shade Manufacturing

POSTED

DEADLINE

Hydrotherapy System Installation and CommissioningThis subcontract for the Royal Canadian Mounted Police involves the installation and commissioning of a hydrotherapy system at the Police Dog Service Training Centre in Innisfail, Canada. The selected contractor will be responsible for the physical installation of the system within a 130 square foot footprint, ensuring it is properly connected to a 2-inch floor drain and hooked up to 220V to 240V electrical specifications. The scope of work includes the final calibration of equipment to ensure full operational readiness and delivery of a turnkey system. Key technical requirements include the use of licensed electricians and strict adherence to floor load requirements of 4,000 lbs. Interested parties must submit their responses by November 24, 2026. This project falls under NAICS code 238210 and is designed for contractors capable of performing specialized electrical and mechanical installations for prime contractors.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

LSVW Brake System Components

Department of National Defence

POSTED

CLOSED

Supply of Fuel Injectors and Filler Opening Caps

Department of National Defence

POSTED

CLOSED

about 1 month ago

Supply of Windshield Washer Cycles

Department of National Defence

POSTED

CLOSED

about 1 month ago

Trailer Axle and Electric Brake System Supply/Installation

Department of National Defence

POSTED

CLOSED

about 2 months ago

Marine Axle and Wheel Assembly Supply

Department of National Defence

POSTED

CLOSED

about 2 months ago

Marine Trailer Brake & Breakaway System

Department of National Defence

POSTED

CLOSED

about 2 months ago

Rim Assembly Supply (NSN 2530-01-3001043, Part No. 9G8032)

Department of National Defence

POSTED

CLOSED

Manufacture of Vehicular Universal Joints

Department of National Defence

POSTED

CLOSED

Supply of Multiple Disk Brake Assemblies for Naval RIBs

Department of National Defence

POSTED

CLOSED

ASNIC Spare Parts Manufacturing and Supply

Department of National Defence

POSTED

CLOSED

Supply of Additional Vehicular Equipment Components (Items 001–0039)

Department of National Defence

POSTED

CLOSED

Solicitation # W6889-20260005

Department of National Defence

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS