Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Vehicle Interior Cabinetry & Millwork

Open

International

Response Deadline12/01/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Royal Canadian Mounted Police involves the fabrication and installation of specialized interior cabinetry and millwork for Mobile Command Vehicle projects. The scope of work requires the production of custom aluminum overhead storage cabinets featuring gas spring doors, a street-side worktable equipped with lockable trigger-latched drawers, and a full-height floor-to-ceiling storage cabinet. Additionally, the contractor is responsible for installing a collapsible worktable on the passenger side to complete the interior workspace. The project will be performed in Chilliwack, British Columbia, under NAICS code 321918. The contract is structured as a subcontract for prime contractors, with a response deadline set for December 1, 2026. The final deliverable consists of fully installed interior cabinetry and workstations tailored to the specific operational needs of the government agency.

General Info

Fabricate and install custom interior cabinetry for RCMP Mobile Command Vehicles in Chilliwack.

Agency

Government of Canada → Royal Canadian Mounted Police

NAICS

321918 - Other Millwork (including Flooring)

Place of Performance

Canada, British Columbia, Chilliwack, CAN

Set-Aside

NONE

Documents

This scope was carved out of 202702388/A.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Ford Transit Van Fit-Up

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineDec 1

Submission deadline

Response Deadline

12/01/2026, 09:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Royal Canadian Mounted Police

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Royal Canadian Mounted Police

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and installs custom interior storage and workspaces for prime contractors on RCMP Mobile Command Vehicle projects. Fabricates aluminum overhead storage cabinets with gas spring doors, a street-side worktable with lockable trigger-latched drawers, and a floor-to-ceiling storage cabinet. Installs a collapsible passenger-side worktable. Delivers fully installed interior cabinetry and workstations.

Similar Contracts

Same NAICS industry code

Architectural Millwork & Specialty PlasticsThis subcontract opportunity, titled Architectural Millwork and Specialty Plastics, is issued by the Department of Defense through Navfacsyscom Mid-Atlantic for work located in Cherry Point, North Carolina. The project requires a contractor to supply and install plastic-laminate-clad cabinets, solid surfacing fabrications, and decorative fiberglass reinforced plastic for prime contractors operating on USACE facility projects. The contract is designated as a total Small Business Set Aside under NAICS code 321918. Interested parties must submit their responses by November 9, 2026, at 5:00 PM. The scope of work focuses on the delivery and professional installation of high-quality cabinetry and specialty plastic surfaces.

Navfacsyscom Mid-Atlantic

POSTED

about 17 hours ago

DEADLINE

Medical Cabinetry & Specialty MillworkThis subcontract opportunity is for the supply and installation of medical cabinetry and specialty millwork for Vancouver Island Health Authority facility projects. The selected provider will work with prime contractors to fabricate and install specialized storage units for anesthesia workrooms, perfusion rooms, sterile storage, and TEE probes reprocessing rooms. All products must be constructed from non-porous, medical-grade materials specifically designed to withstand sterilization processes. The project is based in Canada and falls under NAICS code 321918. Interested parties must submit their responses by the deadline of December 1, 2026. This contract focuses on delivering high-standard, installed medical cabinetry that meets the rigorous hygiene and durability requirements of a healthcare environment.

Vancouver Island Health Authority

POSTED

DEADLINE

Custom Millwork and Shelving SupplyThis subcontract for Custom Millwork and Shelving Supply involves the fabrication and delivery of custom walnut shelving and wall-mounted storage for facility projects at Indiana University of Pennsylvania. The scope of work specifically includes the production of walnut-on-walls shelf straps as outlined in the equipment schedule, with the final finished units delivered for installation by prime contractors. The project is located in Indiana County, Pennsylvania, and falls under NAICS code 321918. Interested parties must submit their responses by the deadline of November 12, 2026, following the posting date of October 12, 2026.

POSTED

DEADLINE

Architectural Millwork and CaseworkThis subcontract for Architectural Millwork and Casework involves the supply and installation of custom and plastic laminate casework for VA Community Based Outpatient Clinic projects. The scope of work specifically includes the fabrication and installation of flush overlay construction featuring concealed hinges for reception and lobby areas. All deliverables must strictly adhere to the standards set by the Architectural Woodwork Institute and the Woodwork Institute. The project is managed under the Department of Veterans Affairs Office of Construction and Facilities Management. Interested parties must note that the response deadline is November 9, 2026. The contract falls under NAICS code 321918 and requires the delivery of fully installed custom wood and laminate casework to the designated project sites.

Office Of Construction & Facilities Management (36C10F)

POSTED

DEADLINE

Millwork & Custom CabinetryThis subcontract for Millwork and Custom Cabinetry involves the supply and installation of custom millwork for prime contractors working on Florida Department of Management Services facility projects. The scope of work includes the fabrication and installation of plastic laminate countertops, file cabinets, and storage drawers, specifically utilizing materials Ref: 12305-A1, 12305-A6, and 12905A14. The final deliverables consist of fully installed customer service workstations and storage cabinetry. Managed under the Florida Department of Revenue, the contract is categorized under NAICS code 321918. The solicitation was posted on September 1, 2026, with a response deadline set for January 26, 2027. Interested parties can find further details through the My Florida Marketplace vendor portal.

Department of Revenue

POSTED

DEADLINE

Wood Packaging and Crating ServicesThe contract entails the fabrication and application of compliant skids, edge protectors, washer sheets, and strapping systems designed to securely package and transport government lumber orders. These materials are essential for ensuring the integrity and safety of bulk wood shipments during transit, meeting strict military and logistical standards for stability, load distribution, and damage prevention. The work is classified under NAICS code 321918, indicating specialized wood packaging and crating services, and is structured as a subcontract under the broader umbrella of Defense Logistics Agency operations within the Department of Defense. All work must adhere to federal compliance requirements for packaging and handling, with precise specifications governing material composition, structural durability, and installation methodology. Performance is expected to support the secure delivery of lumber materials to designated government locations, though specific delivery sites are not outlined. The contract was posted on July 16, 2026, and is accessible via the DIBBS system, indicating its integration into the Department of Defense’s procurement infrastructure. The subcontract nature suggests the prime contractor or government entity is leveraging specialized third-party expertise to ensure compliance and efficiency in logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

Wood Plug Manufacturing and SupplyThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, governs the manufacture and supply of standardized wood plugs. The contractor is required to ensure all products adhere strictly to NSN specifications, with a particular focus on precise sizing, material quality, and full compliance with established packaging standards. The agreement falls under NAICS code 321918 and was posted on July 1, 2026. It establishes the technical and logistical requirements necessary for the delivery of these components to meet military logistics needs.

Defense Logistics Agency

POSTED

DEADLINE

Small Business Subcontracting Participation (WOSB/EDWOSB)This subcontracting opportunity is issued by the Defense Logistics Agency under the Department of Defense for the procurement of components or services. The initiative is specifically designed to increase participation from certified Women-Owned Small Businesses and Economically Disadvantaged Women-Owned Small Businesses operating under NAICS code 321918. Qualified small businesses can provide essential support to a prime contract that has been set aside for women-owned entities. Interested parties should refer to the provided Defense Logistics Agency portal for specific award records and delivery details associated with the project.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Standardized Wood Wedges (Commercial Off-the-Shelf)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, governs the manufacture and delivery of commercial off-the-shelf standardized wood wedges. The contractor is required to adhere strictly to federal item specifications, with a particular emphasis on maintaining precise moisture content and following specific packaging guidelines. For all international shipments, the contractor must ensure full compliance with ISPM 15 requirements to meet global phytosanitary standards. The contract is categorized under NAICS code 321918 and was posted on June 30, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Medical Flooring & FinishesThis subcontract for Specialized Medical Flooring and Finishes involves the supply and installation of medical-grade flooring and antimicrobial wall finishes for healthcare projects within the City of Folsom. The scope of work includes floor preparation and the installation of heat-welded seamless vinyl and epoxy flooring specifically for surgery areas, as well as high-durability finishes for office spaces. The selected provider must possess specialized experience with antimicrobial materials and finishes designed for sterile environments to ensure all installations meet strict healthcare hygiene standards. This project is categorized under NAICS code 321918 and is performed in Folsom, California.

POSTED

DEADLINE

Protective Packaging and Crating SupplyThe contract involves the supply of custom wooden crating, padding, and weatherproof covers specifically designed to protect a historic rail coach during transportation. The focus is on preventing damage caused by environmental factors and handling, ensuring the coach remains preserved and secure throughout the move. This subcontract is related to protective packaging and crating services under the NAICS code 321918. Issued by the Department of the Interior through the Ner Supply MABO office, the contract aims to secure specialized materials tailored for safeguarding valuable and delicate equipment. While specific location details for performance or points of contact are not provided, the solicitation was posted on March 24, 2026. The contract emphasizes the importance of high-quality, custom protective solutions to maintain the integrity of the historic rail coach during transit.

Ner Supply MABO(45000)

POSTED

DEADLINE

Flooring and TilingThis subcontract opportunity with the Department of Veterans Affairs involves the supply and installation of commercial flooring and wall tiling for medical facility projects in Hampton, Virginia. The scope of work includes the installation of VCT, epoxy flooring, medical-grade sheet vinyl, and ceramic tiling, as well as the delivery of wall protection systems. Due to the healthcare environment, contractors must possess specific expertise in seamless flooring and welded seams. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 321918. It is managed by the agency Pcac and was posted on February 12, 2026. Qualified subcontractors will work under prime contractors to ensure all flooring and wall installations meet the rigorous standards required for VA medical facilities.

POSTED

DEADLINE

More opportunities from Government of Canada → Royal Canadian Mounted Police

Same awarding agency

Specialized Exterior Accessories (Step/Hitch)This subcontract involves the supply and installation of removable exterior access steps for prime contractors working on Royal Canadian Mounted Police Mobile Command Vehicle projects. The required equipment consists of a unit step featuring a seven inch wide safety grip, which must be securely attached to the vehicle via a rail hitch receiver to ensure safe and reliable access. The project is managed by the Government of Canada for the Royal Canadian Mounted Police, with performance taking place in Chilliwack, British Columbia. Interested parties must respond by the deadline of December 1, 2026, for this specialized exterior accessory procurement categorized under NAICS code 336390.

Other Motor Vehicle Parts Manufacturing

POSTED

about 24 hours ago

DEADLINE

Interior Lining, Insulation & FlooringThis subcontract involves the supply and installation of interior wall, ceiling, and floor coverings for RCMP Mobile Command Vehicle projects. The scope of work includes the installation of white insulating noise-reduction lining utilizing 3/8 inch plywood and 3/16 inch FRP or aluminum, along with 3/4 inch molded non-slip vinyl sub-flooring, diamond-plate aluminum threshold plates, and flush-mounted E-Track rails. The final deliverable is a completed interior shell and flooring system. The project is managed under the Government of Canada for the Royal Canadian Mounted Police, with performance taking place in Chilliwack, British Columbia. Interested parties must respond by December 1, 2026. The contract is categorized under NAICS code 238310, focusing on specialized interior finishing for these specialized mobile units.

Drywall and Insulation Contractors

POSTED

about 24 hours ago

DEADLINE

Vehicle Electrical Systems & Power DistributionThis subcontract for the Royal Canadian Mounted Police involves the installation of AC/DC power systems and interior lighting for Mobile Command Vehicle projects. The scope of work includes the installation of LED ceiling light panels, power outlets, and two weather-resistant exterior breakout connection ports, as well as the integration of these systems with radio wiring and emergency equipment. The project is located in Chilliwack, British Columbia, and requires the delivery of a certified electrical system. All work must be performed in strict compliance with the Canadian Electrical Code and Electrical Safety Authority standards. The response deadline for this opportunity is December 1, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 24 hours ago

DEADLINE

Ford Transit Van Fit-Up

Solicitation # 202702388/A

The Royal Canadian Mounted Police (RCMP) is soliciting bids for the up-fit of four Ford Transit 250 AWD High Roof, Sliding Door vehicles to be used as Mobile Command Vehicles. The project is located in Chilliwack, British Columbia, with the RCMP responsible for transporting the vehicles to and from the contractor's facility. The contract spans one year from the award date, and the completed vehicles must be delivered within 90 days of the contract effective date. Selection is based on the lowest evaluated price among responsive bids, with a mandatory requirement for bidders to provide at least three references for similar vehicle up-fits completed within the last five years. This procurement is a conditional set-aside under the Procurement Strategy for Indigenous Business (PSIB), meaning competition may be limited to certified Indigenous businesses if two or more compliant bids are received. Contractors must adhere to strict safety and technical standards, including National Canadian Motor Vehicle Safety Standards and certifications from the Canadian Electrical Code and Electrical Safety Authority. The contract includes specific warranty requirements: ten years for the truck body, five years for electrical wiring, and two years for paint and subcomponents. Additionally, the contractor must comply with green procurement policies regarding environmentally preferable packaging and maintain a minimum of $2,000,000 in insurance coverage.

Motor Vehicle Body Manufacturing

POSTED

about 24 hours ago

DEADLINE

Conducted Energy Weapon (CEW) Testing

Solicitation # 202604988/C

The Royal Canadian Mounted Police (RCMP) is seeking a National Individual Standing Offer (NISO) for the electronic testing of TASER 7 Conducted Energy Weapons (CEWs). The anticipated start date is January 4, 2027, with an initial term of five years and three optional one-year extensions. This solicitation is open exclusively to Canadian suppliers and those from applicable trading partners. Selection is based on mandatory technical criteria, and the responsive offer with the lowest evaluated price will be recommended for award. The scope of work involves testing approximately 2,500 CEWs annually, with a required turnaround time of ten business days from receipt. All testing must adhere to Axon Enterprise, Inc. electrical output specifications and the Firearms Act and Regulations. Contractors are required to provide monthly reports in Excel format, including an executive summary and detailed test pages completed by an approved Electrical Engineer. Strict security and confidentiality protocols are in place, including mandatory security clearances for personnel, physical security assessments of work sites, and specific packaging requirements. To maintain confidentiality, shipments must be sent in opaque, sealed containers without markings indicating the contents are weapons, and documentation must identify the items only as machine tools or machine parts. All CEWs must be shipped without battery packs, and live cartridges are strictly prohibited from being packaged or shipped with the devices.

Testing Laboratories and Services

POSTED

about 24 hours ago

DEADLINE

General Commercial Construction Sub-tradesThis subcontract opportunity is for the provision of general commercial construction sub-trade services for the Royal Canadian Mounted Police in Saskatchewan, Canada. The selected provider will perform specialized installations for prime contractors, ensuring all work adheres to Canadian Content and Canadian Value-Added policies. To be eligible, contractors must provide a Workers Compensation Board letter of good standing and possess either a Certificate of Recognition or a Registered Safety Plan. The response deadline for this solicitation is December 9, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Psychologist Services - Newfoundland and Labrador

Solicitation # M1000-7-1006

The Royal Canadian Mounted Police (RCMP) are seeking a Registered Psychologist to provide professional services in St. John's, Newfoundland and Labrador. The contract is for a single individual to work approximately 25 hours per week on a fully on-site basis. The initial term is for one year, with an irrevocable option for the government to extend the agreement for up to two additional one-year periods. The primary scope of work involves supporting the RCMP Occupational Health Services mission through the design and delivery of psychology workshops on topics such as suicide prevention and stress management, collaborating on disability case management and return-to-work programs, and assisting in the development of B Division psychological services policy. To be eligible, the candidate must be registered with the Newfoundland and Labrador Psychology Board, hold at least a Master's degree in Psychology, and possess a minimum of five years of post-university clinical experience. Additionally, the resource must have at least 30 months of experience within the last five years in an occupational health setting specifically serving policing, military, or safety-sensitive first responders. Due to the nature of the work, the successful candidate must obtain RCMP Enhanced Reliability Status with Top Secret security clearance before the contract award and maintain valid medical malpractice liability insurance. Selection is based on a weighted evaluation consisting of 60% technical merit and 40% price. Technical scoring is based on a 30-point scale evaluating experience in occupational health for first responders, disability case management, and professional qualifications. This solicitation is open only to Canadian suppliers under the Policy on Reciprocal Procurement. Bids must be submitted in three separate PDF sections covering technical, financial, and certification requirements, with a total email size not exceeding 5MB.

Offices of Mental Health Practitioners (except Physicians)

POSTED

DEADLINE

Modular Building Project – Dillon, Saskatchewan

Solicitation # M5000-26-2255/A

The Royal Canadian Mounted Police is soliciting full construction services for a modular building project at an existing site in Dillon, Saskatchewan, with a completion deadline of March 31, 2029. The scope of work includes the construction of an 800 square meter single-storey wood-framed modular building featuring office space, a garage, and contained use areas, as well as a separate 75 square meter wood-framed garage. The project encompasses the installation of structural, mechanical, and electrical systems with emergency backup power, a lift station, and a self-contained solar photovoltaic system. Site development requirements include underground services, grading, signage, lighting, and granular surfacing. This procurement is structured as a two-phase competition open exclusively to Canadian suppliers. Phase One is a Request for Qualifications focusing on bidder experience and mandatory requirements, while Phase Two will invite pre-qualified bidders to submit financial bids based on detailed specifications and drawings. The contract will be awarded to the lowest-priced compliant bid. Key requirements include security clearances, performance and labour and material payment bonds, and adherence to the Occupational Health and Safety Act of Saskatchewan. The project also emphasizes Indigenous participation and prioritizes Canadian content. Bids for the first phase must be submitted via email by December 9, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Canine Hydrotherapy Pool Underwater Treadmill

Solicitation # M5000-27-01501/A

The Royal Canadian Mounted Police is soliciting bids for the supply, delivery, installation, commissioning, and training for one canine hydrotherapy pool and underwater treadmill system, including a water storage tank cover. Located in Innisfail, Alberta, this equipment will be used for the rehabilitation, conditioning, and fitness maintenance of Police Service Dogs. The system must meet specific technical requirements, including electrical specifications of 220V–240V, 20–50 Amp, 50-60 Hz, and the capability to utilize a cold-water source. All deliverables must be received by March 31, 2027, with specific training or deliverables due within three months of the contract award. This firm-price contract is open to Canadian suppliers and applicable trading partners under the Reciprocal Procurement Policy. The award will be granted to the responsive bid with the lowest evaluated price, following a technical evaluation to ensure all mandatory criteria are met. Bidders must submit their proposals electronically by November 24, 2026, ensuring that financial information is kept separate from technical documents. Delivery is required Delivered Duty Paid to Innisfail, Alberta, and the contractor is encouraged to use reusable, returnable, or recyclable packaging in accordance with green procurement directives.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE

Heavy Equipment Shipping and FreightThis subcontract for Heavy Equipment Shipping and Freight involves the transportation of a hydrotherapy system and associated accessories weighing over 4,000 lbs for the Royal Canadian Mounted Police Dog Service Training Centre. The selected provider will support prime contractors by utilizing heavy-duty transport vehicles and specialized rigging equipment to ensure the safe delivery and unloading of the equipment at the designated facility in Innisfail, Canada. The opportunity was posted on November 2, 2026, with a response deadline of November 24, 2026. Operating under NAICS code 484220, this project is managed through the Government of Canada to facilitate essential infrastructure needs for the PDSTC location.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Water Storage Tank Cover SupplyThis subcontract involves the manufacture and delivery of one specialized water storage tank cover for the Royal Canadian Mounted Police Dog Service Training Centre in Innisfail, Canada. The cover must be compatible with a specific hydrotherapy system model and constructed from durable, water-resistant materials designed to withstand wet environments. The project is managed under the Government of Canada and falls under NAICS code 337920. Interested parties must respond by November 24, 2026, to provide these supplies to the prime contractors overseeing the facility projects.

Blind and Shade Manufacturing

POSTED

DEADLINE

Hydrotherapy System Installation and CommissioningThis subcontract for the Royal Canadian Mounted Police involves the installation and commissioning of a hydrotherapy system at the Police Dog Service Training Centre in Innisfail, Canada. The selected contractor will be responsible for the physical installation of the system within a 130 square foot footprint, ensuring it is properly connected to a 2-inch floor drain and hooked up to 220V to 240V electrical specifications. The scope of work includes the final calibration of equipment to ensure full operational readiness and delivery of a turnkey system. Key technical requirements include the use of licensed electricians and strict adherence to floor load requirements of 4,000 lbs. Interested parties must submit their responses by November 24, 2026. This project falls under NAICS code 238210 and is designed for contractors capable of performing specialized electrical and mechanical installations for prime contractors.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS