Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Hardware Fabrication & Production

Open

Federal

Response Deadline11/20/2026, 04:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Specialized Hardware Fabrication and Production supports the Sniper CATP2 system for prime contractors on AFLCMC projects under the Department of Defense. The scope of work involves the fabrication and production of pod components, hardware upgrades, and the assembly of Line Replaceable Units using precision aerospace equipment. All activities must comply with the Buy American Act, the Counterfeit Prevention Plan, Contractor Quality System standards, and IUID marking requirements. The project is managed by the FA8540 Aflcmc Eskb agency with performance based in Orlando. Under NAICS code 336413, the contractor is responsible for delivering fully fabricated hardware components and integrated pod assemblies. The solicitation was posted on September 22, 2026, with a response deadline of November 20, 2026.

General Info

Subcontract for Sniper CATP2 hardware fabrication and pod assembly for AFLCMC in Orlando.

Agency

Department Of Defense → FA8540 Aflcmc Eskb

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

Orlando, FL, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8540-26-R-0001.

The full solicitation package (16 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Sniper Comprehensive Advanced Targeting Pod (CATP2) Support and Sustainment Option Years 6 & 7

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 04:00:00 PM ESTin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8540 Aflcmc Eskb

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8540 Aflcmc Eskb

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and produces hardware components for the Sniper CATP2 system for prime contractors on AFLCMC projects. Performs production of pod components, hardware upgrades, and assembly of Line Replaceable Units (LRUs). Utilizes precision aerospace fabrication equipment and materials compliant with the Buy American Act and Counterfeit Prevention Plan. Adheres to Contractor Quality System and IUID marking requirements. Delivers fabricated hardware components and integrated pod assemblies.

Similar Contracts

Same NAICS industry code

Precision Aerospace Component Manufacturing - Structural Aircraft FittingThis subcontract involves the precision CNC machining of a structural aircraft fitting, specifically part number 140T2907-17, for the Department of Defense under the DLA Weapons Support ASC. The manufacturing process must strictly adhere to TDP Rev A Gen 1 and Reference QAP 13873. The final deliverable consists of one finished fitting accompanied by all necessary airworthiness certifications and comprehensive documentation. To qualify for this project, the manufacturer must maintain ISO 9001:2015 certification and FAA Airworthiness Approval. Additionally, the contractor is required to ensure full supply chain traceability in compliance with DLA Directive C03. Performance for this contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Structural Plate Manufacturer/SupplierThis subcontract involves the manufacture and supply of eight structural aircraft plates meeting NSN 1560-00-328-4992 specifications for prime contractors under DLA Distribution supply contracts. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. The supplier is responsible for sourcing or manufacturing the plates and ensuring all hazardous materials are packaged according to TQ requirement IP025. Additionally, all packaging and labeling must strictly adhere to MIL-STD-129 standards. Delivery of the units is required on a FOB Origin basis.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Aerospace Structural Alloy StockThis subcontract involves the supply of aerospace-grade structural alloy plate stock for prime contractors supporting DLA Weapons Support ASC projects. The raw materials must strictly adhere to the specifications outlined in Drawing NR 81205 4-3904 and require full material traceability along with Mill Test Reports to maintain compliance with rigorous aerospace standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413 for the Department of Defense. Performance will take place at Tinker AFB, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Machining of Structural Aircraft PlatesThis subcontract involves the precision fabrication of 15 structural aircraft plates for prime contractors supporting DLA Weapons Support ASC projects. The work requires the use of CNC equipment to machine parts according to Drawing NR 81205 4-3904 and ASME Y14.31 standards, maintaining strict tolerances between 0.005 and 0.014 inches. Additionally, the contractor must perform bare item marking per RQ017 and complete a First Article Test to ensure quality compliance. The project is a total small business set-aside under NAICS code 336413, with performance taking place at Tinker AFB. To be eligible, the provider must hold ISO 9001:2015 and CMMC Level 2 certifications. The contract was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Troop Compartment Speaker BezelsThis subcontract involves the manufacturing of precision troop compartment speaker bezels for the DLA Weapons Support ASC. The contractor is responsible for fabricating components in accordance with Basic Drawing NR 98897 4E20059 Revision C and TDP Rev A Gen 3. The final deliverables include six finished bezels under NSN 1560-00-373-6353 and two units dedicated to First Article Testing to be delivered to Robins AFB in Georgia. To qualify for this project, the provider must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. The work is categorized under NAICS code 336413 and is performed for the Department of Defense. Performance of the contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Structural Chassis Fabrication (P/N F1469579)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the fabrication of 21 aircraft structural chassis components, specifically Part Number F1469579. The selected manufacturer is responsible for the precision machining and forming of aircraft-grade structural materials to support prime contractors on DLA Aviation supply contracts. The project mandates strict adherence to the DLA Master List of Technical and Quality Requirements and requires AS9100 or equivalent aerospace quality certifications. All deliverables must pass zero-non-conformance acceptance testing in accordance with MIL-STD-105/ASQ Z1.4. The response deadline for this requirement is November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Grooved Clamp Couplings (P/N BACC10DU350ABE)This subcontract involves the manufacture or procurement of 57 grooved clamp couplings, part number BACC10DU350ABE, for prime contractors supporting DLA Weapons Support ASC projects. The components must be produced in accordance with drawings BACC10DU REV AD and 81205 BACC10DU Revision AE, with final delivery designated for Tinker AFB. Strict adherence to packaging and palletization standards is required, specifically ASTM D3951, MIL-STD-129, and RP001. To ensure quality and regulatory compliance, the provider must maintain SAE AS9100 and ISO 9001:2015 certifications. Additionally, the contractor must be part of the US/Canada Joint Certification Program to satisfy ITAR and EAR requirements. This effort falls under NAICS code 336413 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Diesel Engine Coolant Fluid Tank SupplyThis subcontract involves the manufacture or sourcing of 20 diesel engine coolant fluid tanks, identified by NSN 2815-99-702-8589, for prime contractors supporting DLA Weapons Support projects. The project is managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency, with performance taking place in New Cumberland. The selected provider must ensure all units strictly adhere to the technical specifications and quality requirements outlined in the DLA Master List, specifically regarding R or I numbers. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Spring Tension Clips (Retainer-Access Cover)This subcontract, managed by the DLA Weapons Support Land Supply Chain for the Department of Defense, involves the manufacture or procurement of specialized aerospace hardware for aircraft projects. The primary requirement is the delivery of 78 units of spring tension clips, specifically the retainer-access cover for wing and fuselage lower sections, identified by NSN 5340014579076. Performance will take place at Robins Air Force Base. Strict adherence to technical and regulatory standards is mandatory. Materials must be packaged according to TQ requirement IP025, FED-STD-313, MIL-STD-129, and RP001. Additionally, the provider must maintain full compliance with ITAR and EAR export controls, as well as cybersecurity frameworks including NIST SP 800-171 and CMMC Level 2.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing and Supply of Step Assembly, PylonThis subcontract involves the manufacturing and supply of Step Assembly, Pylon and Tail Rotor Pylon components for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for producing three units of the Step Assembly, Pylon in strict accordance with NSN 1560010845240 specifications. Due to the nature of the components, the work requires specialized aerospace tooling and adherence to Critical Application Item quality standards, including the coordination of a Government First Inspection Test. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division and is designated as a Total Small Business Set-Aside. Performance of the contract will take place in Tracy, California. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Seat Cushion Cover ProductionThis subcontract involves the production and delivery of 4,000 aircraft seat cushion covers for prime contractors supporting the DLA Weapons Support ASC. The selected provider must fabricate the covers according to specific aircraft interior requirements and adhere to strict military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. All finished goods are to be delivered to the DLA Distribution DDSP New Cumberland Facility. To ensure quality and consistency, the contractor is required to maintain a quality management system that is compliant with ISO 9001:2015 or an equivalent standard. This effort falls under NAICS code 336413 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Rod Assembly Manufacturing (NSN 3040-01-255-2176)This subcontract involves the precision machining and assembly of 19 critical application Rod Assemblies under NSN 3040-01-255-2176 for the DLA Weapons Support Land Supply Chain. The manufacturer must produce components according to specific approved part numbers from Boeing, RBC, or University Swaging. Performance of the contract will take place in Corpus Christi, Texas. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and provide a CMMC Level 2 self-assessment. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. This project falls under NAICS code 336413 and supports prime contractors within the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8540 Aflcmc Eskb

Same awarding agency

Support Equipment SupplyThis subcontract, managed by the Department of Defense under the AFLCMC ESKB agency, focuses on the procurement and delivery of replenishment parts and support equipment for the Sniper CATP2 system. The contractor is responsible for sourcing specific part numbers listed in the Consolidated Bill of Materials and delivering physical support equipment and aerospace components to Orlando. Key operational requirements include strict adherence to IUID standards and the implementation of a Counterfeit Prevention Plan to ensure component authenticity. The opportunity was posted on September 22, 2026, with a response deadline of November 20, 2026, falling under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 months ago

DEADLINE

Logistics & Technical Training SupportThis subcontract for Logistics and Technical Training Support provides critical assistance to prime contractors on AFLCMC projects. The primary scope of work involves the development of Type 1 Maintenance Training materials and Air Force Technical Manuals, utilizing specialized technical writing software and training simulators. All deliverables must strictly adhere to the TMCR 86-01Q/T Air Force Technical Manual Contract Requirements, with specific focus on the delivery of Training Materials under CDRL G008 and Technical Manuals under CDRL G014. Managed by the Department of Defense under the FA8540 Aflcmc Eskb agency, the project is categorized under NAICS code 611699 and will be performed in Orlando. The solicitation was posted on September 22, 2026, with a response deadline of November 20, 2026.

All Other Miscellaneous Schools and Instruction

POSTED

about 2 months ago

DEADLINE

Cybersecurity & Program ProtectionThis subcontract for Cybersecurity and Program Protection supports prime contractors on AFLCMC projects within the Department of Defense. The scope of work involves performing cybersecurity analysis and anti-tamper protection, utilizing secure lab environments and specialized testing tools to develop Architecture Analysis Reports, Security Evaluation Documents, and Anti-Tamper Plans. All activities must strictly adhere to the Program Protection Implementation Plan and Security Test Plan requirements. The contract is categorized under NAICS code 541519 and is based in Orlando. Key deliverables include Vulnerability Assessments, Security Evaluation Documents, and Anti-Tamper Plans. The solicitation was posted on September 22, 2026, with a response deadline of November 20, 2026.

Other Computer Related Services

POSTED

about 2 months ago

DEADLINE

Systems Engineering & Integration (SE&I)This subcontract for Systems Engineering and Integration services supports prime contractors on AFLCMC projects within the Department of Defense. The scope of work involves providing systems engineering management and integration, which includes the development of Systems Engineering Management Plans, the management of Engineering Change Proposals, and the execution of Configuration Management using specialized tools and engineering design data. All deliverables must adhere to DI-SESS-81785A and DI-SESS-80858D standards. The project is categorized under NAICS code 541330 and will be performed in Orlando. Interested parties must respond by the deadline of November 20, 2026, following the posting date of September 22, 2026. Key deliverables for this engagement include the final Systems Engineering Management Plans, Engineering Change Proposals, and Configuration Management Plans.

Engineering Services

POSTED

about 2 months ago

DEADLINE

Agile Software Development & SustainmentThis subcontract for Agile Software Development and Sustainment supports the Sniper system for prime contractors on AFLCMC projects under the Department of Defense. The scope of work involves providing software engineering and agile sustainment, which includes the development of Software Requirements Specifications, the execution of Software Vulnerability Assessments, and the creation of Software Version Descriptions. All activities must be performed within agile development environments and version control systems while adhering to strict cybersecurity standards and SVAR requirements. The primary deliverables for this engagement consist of executable software files, source code listings, and detailed SRS documentation. The project is categorized under NAICS code 541512 and is based in Orlando. The solicitation was posted on September 22, 2026, with a response deadline of November 20, 2026.

Computer Systems Design Services

POSTED

about 2 months ago

DEADLINE

Sniper Comprehensive Advanced Targeting Pod (CATP2) Support and Sustainment Option Years 6 & 7

Solicitation # FA8540-26-R-0001

This solicitation is for the Sniper Comprehensive Advanced Targeting Pod (CATP2) Support and Sustainment, specifically seeking to award Option Years 6 and 7 of an Indefinite Delivery/Indefinite Quantity (IDIQ) contract. The effort involves the management, engineering, production, fabrication, integration, configuration management, testing, and logistics support of the Sniper system to maintain specific system availability rates and reliability Mean Time Between Maintenance Events. The government intends to negotiate a sole source award to Lockheed Martin Corporation, though other responsible sources may submit capability statements. The period of performance for these options extends through December 17, 2029, with work performed at Robins Air Force Base, Georgia, contractor facilities, and various worldwide locations. The contract utilizes a mix of Firm-Fixed-Price and Cost-Plus-Fixed-Fee CLINs, with an Independent Government Estimate of 62 million dollars for the option years. Key requirements include adherence to AS9100D quality standards, compliance with MIL-STD-2073-1 for packaging and MIL-STD-129 for marking, and strict adherence to cybersecurity and data rights assertions. Deliverables are managed via a comprehensive Contract Data Requirements List and processed through the Wide Area Workflow for inspection and acceptance. Foreign participation is prohibited at the prime contract level per Air Force Instruction 16-201. Proposals and capability statements must be submitted by November 20, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 months ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS