Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Specialized Inspection and NDT Services

Active

Federal

Response Deadline11/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Specialized Inspection and NDT Services supports Department of Defense remanufacture projects for the DLA and Air Force. The selected provider will perform technical inspections and Non-Destructive Testing on critical gears and shafts, utilizing methods such as Magnetic Particle Inspection, Liquid Penetrant Inspection, and Ultrasonic or X-ray inspection. All work must be conducted using calibrated measurement tools to ensure precision and safety. The contractor is required to hold NAS410 or an equivalent NDT certification to qualify for the project. Key deliverables include the submission of detailed inspection reports and formal airworthiness certifications. Interested parties must respond by November 20, 2026, under NAICS code 541380.

General Info

NDT inspection services for DoD gears and shafts; NAS410 certification required by 11/20/2026.

Agency

Department Of Defense → FA8118 Afsc Pzabb

NAICS

541380 - Testing Laboratories and Services

Place of Performance

OK

Set-Aside

NONE

Documents

This scope was carved out of FA811826R0057.

The full solicitation package (18 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FA811826R0057 - REMAN E-3 AI GEARBOX ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 6

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8118 Afsc Pzabb

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8118 Afsc Pzabb

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical inspection and Non-Destructive Testing (NDT) for prime contractors on DLA/Air Force remanufacture projects. Conducts Magnetic Particle Inspection (MPI), Liquid Penetrant Inspection (LPI), and Ultrasonic or X-ray inspection of critical gears and shafts using calibrated measurement tools. Requires NAS410 or equivalent NDT certification. Delivers inspection reports and airworthiness certifications.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) for Alignment DeviceThis subcontract involves performing First Article Testing for an alignment device under NSN 4931-01-718-7007 to support prime contractors delivering for the DLA Weapons Support ASC. The primary objective is to conduct rigorous testing on the first production unit using specialized calibration equipment and facilities to ensure full adherence to all technical specifications. The selected provider will be responsible for documenting all results and providing the necessary validation data to the Department of Defense. Final deliverables include a comprehensive FAT Report and a validated first-article unit. The work is designated for performance in Fort Benning, Georgia, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) and Validation ServicesThis subcontract opportunity is for First Article Testing (FAT) and Validation Services to support prime contractors delivering DLA supply contracts. The selected provider will perform specialized testing on proximity switches to ensure compliance with government technical data and critical application requirements. All work must be conducted using calibrated electronic sensor testing equipment, and the provider is required to hold ISO/IEC 17025 or an equivalent military-grade certification. The final deliverables for this engagement include a formal First Article Test Report and Certification. Managed by the Department of Defense under the DLA Weapons Support Electrical Devices Division, this project is designated as a Service-Disabled Veteran-Owned Small Business set-aside. Performance will take place at Hill AFB, zip code 84056-5734, under NAICS code 541380. The solicitation was posted on October 6, 2026, with a response deadline of October 19, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) and NDT ReportingThis subcontract involves performing First Article Testing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the testing of three units of NSN 5340-00-361-3510 utilizing specialized measurement tools and Non-Destructive Testing equipment. The performance of these services will take place in New Cumberland, Pennsylvania. The contractor is responsible for generating formal test reports and delivering signed FAT reports and test data that comply with data item description D-NDT-80809B. This requirement falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

First Article Test (FAT) ValidationThis subcontract, titled First Article Test (FAT) Validation, involves performing critical testing for prime contractors delivering supply contracts to the Defense Logistics Agency. The scope of work focuses on conducting First Article Testing on initial production units to verify strict compliance with RA001 standards and NSN 7690016513617, specifically evaluating weather resistance and adhesive strength. The selected provider is responsible for documenting all test results for government approval in accordance with CLIN 0002 requirements, culminating in the delivery of a formal FAT Report and a certification of compliance. Performance will take place at Eglin AFB, and the project falls under NAICS code 541380.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports DLA Weapons Support aerospace projects, specifically focusing on Boeing part number 69-63788-503. The selected provider will perform dimensional inspections, material analysis, and performance testing on initial production units using certified metrology and non-destructive testing equipment. A critical requirement for this engagement is that the performing laboratory must maintain ISO/IEC 17025 accreditation to ensure technical competence and valid results. The primary deliverables include a comprehensive First Article Test Report and the formal certification of the initial unit. Work is associated with the Department of Defense and is designated for performance at Tinker AFB. Interested parties should note the response deadline of October 14, 2026, for this specialized aerospace quality assurance effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Production Lot Test ServicesThis subcontract for Production Lot Test Services supports prime contractors delivering commodities for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves performing specialized production lot testing to verify the mechanical integrity, insulation, and electrical continuity of branched wiring harnesses. These evaluations are conducted using hipot testers, continuity testers, and multimeters, culminating in the delivery of a formal certification and test report for each production lot. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. Interested parties should note the response deadline of October 14, 2026, for this specific requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Laboratory Certification for FuseesThis subcontract, titled First Article Testing and Laboratory Certification for Fusees, involves performing chemical and physical testing on first article samples for prime contractors supporting DLA Troop Support projects. The selected provider will conduct detailed analysis to certify compliance with USDA Forest Service specifications, utilizing specialized pyrotechnic testing facilities and chemical analysis equipment. All results must be coordinated with the Missoula Technology and Development Center, and the final deliverables consist of signed test reports and formal certifications of compliance. Managed by the Department of Defense under DLA DIST SAN JOAQUIN, the project falls under NAICS code 541380. The work requires a qualified chemist or test engineer to ensure technical accuracy. The solicitation was posted on October 6, 2026, with a response deadline of October 20, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 11 hours ago

DEADLINE

First Article Test (FAT) and Quality ValidationThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, focuses on First Article Testing and quality validation for NSN 2840-00-365-2024. The primary objective is to validate manufacturing processes for prime contractors by producing a first-article sample and verifying its material properties and dimensions. This verification process utilizes CMM and laboratory equipment to ensure strict adherence to the DLA Master List and CSI validation protocols. The scope of work culminates in the delivery of an approved sample part and a comprehensive First Article Test Report. Performance for this contract is centered in Texarkana, Texas, under NAICS code 541380. The solicitation was posted on October 6, 2026, with a response deadline of October 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation, operator of the Joliet Job Corps in Illinois, is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential abatement of floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area. Specifically, the project may require the removal and disposal of approximately 2,000 square feet of asbestos-containing material in the warehouse and 600 square feet in the gymnasium. All work must be performed by contractors holding all required State of Illinois licenses and certifications, utilizing accredited laboratories and adhering to federal, state, OSHA, and EPA regulations. This is a small business set-aside opportunity open to various SBA-certified categories, including VOSB, SDVOSB, WOSB, and HUBZone small businesses. Interested offerors must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026, at 3:00 PM CT. Award will be based on best value as determined by MTC. The successful contractor must comply with various FAR clauses, including Service Contract Labor Standards under Wage Determination SCA 2015-5019 Rev 31, and must adhere to strict Department of Labor requirements regarding records management, mandatory training, and privacy breach notifications.

Joliet Job Corps

POSTED

about 12 hours ago

DEADLINE

Construction Materials Testing (Third Party)This subcontract opportunity is for the provision of independent third party construction materials testing for prime contractors working on City of Atlanta water infrastructure projects. The selected provider will be responsible for conducting tests on concrete and soil compaction in strict accordance with City specification Section 01410. Key deliverables include the submission of detailed material test reports and formal compliance certifications, with all activities coordinated through the Resident Engineer. The solicitation is categorized under NAICS code 541380 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of October 30, 2026, at 1:00 PM. This project supports critical infrastructure development within the state of Georgia under the jurisdiction of the City of Atlanta.

City of Atlanta

POSTED

about 12 hours ago

DEADLINE

Specialized Structural Testing (X-Ray/NDT)This subcontract involves providing specialized non-destructive testing services for prime contractors working on water infrastructure projects for the City of Atlanta. The primary scope of work focuses on utilizing X-ray and Ground Penetrating Radar equipment to map internal structural components, specifically verifying the location of rebar and embedded conduits in items slated for demolition. The selected provider will be responsible for delivering detailed rebar location maps and comprehensive reports to facilitate safe and accurate demolition planning. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

City of Atlanta

POSTED

about 12 hours ago

DEADLINE

Third-Party Testing and InspectionThis subcontract for Third-Party Testing and Inspection is issued by the New Jersey Division of Property Management and Construction. The selected firm will be responsible for performing technical inspections and soil de-compaction verification for prime contractors on DPMC projects. Required technical tasks include conducting soil bulk-density testing, probing-wire analysis, and penetrometer tests using specialized equipment to ensure compliance and quality. To be eligible for this contract, the firm must be DPMC prequalified. The primary deliverables consist of certified test results and detailed inspection reports. Interested parties should note that the response deadline is November 10, 2026, and the work falls under NAICS code 541380.

New Jersey Division of Property Management and Construction

POSTED

about 14 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → FA8118 Afsc Pzabb

Same awarding agency

Gearbox Consumable Parts SupplierThe Gearbox Consumable Parts Supplier subcontract, issued by the Department of Defense under agency FA8118 Afsc Pzabb, involves the sourcing and delivery of 100% replacement consumable parts for prime contractors working on DLA and Air Force remanufacture projects. The scope of work specifically requires the provision of OEM-approved seals, O-rings, bearings, and fasteners for NSN 1680-01-083-2672, delivered as kits accompanied by necessary certifications of authenticity and conformance. Operating under NAICS code 423830, the contract mandates strict adherence to Supply Chain Risk Management and DFARS 252.204-7018 regulations concerning covered defense telecommunications equipment. The solicitation was posted on October 6, 2026, with a response deadline set for November 20, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Industrial Cleaning and Surface FinishingThis subcontract for Industrial Cleaning and Surface Finishing supports prime contractors on DLA and Air Force remanufacture projects under the Department of Defense. The scope of work involves performing industrial cleaning, degreasing, and specialized surface finishing, including the removal of corrosion and the application of protective coatings, plating, or anodizing. These tasks are executed using industrial parts washers and plating tanks in strict accordance with the finishing specifications outlined in the statement of work. The contractor is responsible for ensuring full environmental compliance regarding chemical disposal and the final delivery of cleaned and finished components. This opportunity falls under NAICS code 332813 and was posted on October 6, 2026, with a response deadline of November 20, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Gearbox Component Machining and RestorationThis subcontract, titled Gearbox Component Machining and Restoration, involves providing precision machining, grinding, and restoration services for internal gearbox components. Supporting prime contractors on DLA and Air Force remanufacture projects, the scope of work includes using CNC milling and turning centers to machine worn components and performing surface grinding and honing to restore tolerances to like-new condition. All work must be executed in strict adherence to the technical drawings specified in the statement of work to ensure delivered components meet original equipment manufacturer tolerances. Managed by the Department of Defense under agency FA8118 Afsc Pzabb, the project falls under NAICS code 332710. The solicitation was posted on October 6, 2026, with a response deadline set for November 20, 2026. The primary objective is the delivery of high-precision gearbox components verified by calibrated measuring tools to support critical aerospace remanufacturing efforts.

POSTED

about 16 hours ago

DEADLINE

in about 1 month

FA811826R0057 - REMAN E-3 AI GEARBOX ASSEMBLY

Solicitation # FA811826R0057

Solicitation FA811826R0057 is a five-year, fixed-price IDIQ contract issued by the Department of the Air Force, AFSC PZABB, for the remanufacture of E-3 AI Gearbox Assemblies (NSN 1680-01-083-2672). The scope of work requires returning end items to a like-new condition, with a basic requirement ranging from a minimum of 7 to a maximum of 16 units. Deliveries are scheduled for one unit after 90 calendar days after receipt of order, followed by one unit every 30 days, with all items shipped F.O.B. Origin to DLA Distribution Depot Hill. Award will be based solely on the lowest total evaluated price, provided the offeror is an approved source and the proposal is complete and balanced. The contractor must maintain a quality system compliant with ISO 9001-2015 and AS9100, and all work must adhere to applicable Air Force Technical Orders. Strict packaging and marking standards are mandated, including MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, with specific requirements for heat-treated wood packaging and preservative application on bearings. Administrative requirements include submitting payment requests and receiving reports via Wide Area WorkFlow (WAWF) using DODAAC FA5251. The contract incorporates critical cybersecurity and security protocols, including DFARS 252.204-7012 and 252.204-7021, as well as strict guidelines for the handling and destruction of classified and unclassified documents. Additionally, the prime contractor is responsible for managing organizational conflicts of interest and notifying the government before adding any subcontractors.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Non-Destructive Testing (NDT)This subcontract opportunity is for the provision of Non-Destructive Testing services to support Department of the Air Force F-15 fuel tank projects. The selected contractor will be responsible for inspecting valve components to identify internal flaws or cracks using X-ray, Ultrasonic, and Dye Penetrant methods. Key deliverables include the utilization of specialized X-ray machines and ultrasonic transducers to produce detailed NDT inspection reports and certifications for prime contractors. Managed by the Department of Defense under agency FA8118 Afsc Pzabb, this requirement is designated as a total Small Business Set Aside under NAICS code 336412. The solicitation was posted on October 5, 2026, with a response deadline of November 4, 2026. Performance of the contract is associated with location 73145.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Specialized Surface Treatment & CoatingThis subcontract opportunity, titled Specialized Surface Treatment and Coating, involves providing critical finishing services for valve components used in Department of the Air Force F-15 fuel tank projects. The scope of work requires the application of aerospace-grade coatings, including Alodine, Cadmium plating, and specialized anodizing, utilizing chemical baths and tanks to ensure components are protected against corrosion and wear. Managed by the Department of Defense under agency FA8118 Afsc Pzabb, this project is designated as a total Small Business Set Aside under NAICS code 332812. The solicitation was posted on October 5, 2026, with a response deadline of November 4, 2026. The primary objective is the delivery of high-quality, surface-treated components to prime contractors to support military aviation infrastructure.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Aerospace Seal & Gasket SupplyThe Aerospace Seal and Gasket Supply subcontract involves the provision of high-performance seals, O-rings, and gaskets for Department of the Air Force F-15 fuel tank safety relief valve projects. The scope of work requires the manufacture or sourcing of fuel-resistant elastomers, specifically Viton and Fluorocarbon, that adhere to MIL-SPEC standards for aviation fuel and extreme temperature ranges. Deliverables include complete seal and gasket kits provided to prime contractors. This opportunity is designated as a Total Small Business Set Aside under NAICS code 326199 and is managed by the Department of Defense agency FA8118 Afsc Pzabb. The solicitation was posted on October 5, 2026, with a response deadline of November 4, 2026. Performance is associated with location 73145.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Specialized Valve Assembly & TestingThis subcontract opportunity, titled Specialized Valve Assembly and Testing, involves the assembly and certification of safety relief valves for Department of the Air Force F-15 fuel tank projects. The scope of work includes the assembly of seals, springs, and valves, as well as performing hydrostatic testing, pressure relief calibration, and leak detection. These tasks must be executed using pressure test benches within clean-room environments to ensure all delivered components are fully assembled and certified. The project is issued by the Department of Defense under agency FA8118 Afsc Pzabb and is designated as a total Small Business Set Aside. Interested parties must respond by November 4, 2026. The work falls under NAICS code 336413 and will be performed in the 73145 zip code area.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Precision Machining & Component FabricationThis subcontract opportunity, titled Precision Machining and Component Fabrication, involves the precision machining, milling, and turning of valve bodies, seats, and internal components for Department of the Air Force F-15 fuel tank safety relief valve projects. The selected contractor will support prime contractors by utilizing CNC machining, grinding, and fabrication techniques to process high-grade aerospace alloys based on provided technical data packages. Managed by the Department of Defense under agency FA8118 Afsc Pzabb, this project is designated as a total Small Business Set Aside under NAICS code 332710. The solicitation was posted on October 5, 2026, with a response deadline of November 4, 2026. The primary objective is the delivery of high-precision machined valve components meeting strict aerospace standards.

POSTED

DEADLINE

AMENDMENT-05 FD203026007725_FA811826R0047- REMAN SOLICITATION F-15 Fuel Tank Safety Relief Valve

Solicitation # FD203026007725-05

Solicitation FA811826R0047, managed by the Department of the Air Force AFSC PZABB at Tinker AFB, Oklahoma, is a total small business set-aside for the remanufacturing of F-15 Fuel Tank Safety Relief Valves. The procurement falls under NAICS code 336413. The primary point of contact for this effort is Mark Green. Amendment 0005 specifically serves to extend the proposal submission deadline to November 4, 2026, at 3:00 p.m. CST. Offerors are required to acknowledge receipt of this amendment by completing the necessary documentation or providing electronic communication referencing the solicitation and amendment numbers. Proposals must be submitted to the AFSC PZABB office at 3001 Staff Dr Ste 1AC 99A, Tinker AFB, OK 73145-3303.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Special Tooling and Test Equipment (ST/STE) SupplyThis subcontract involves the fabrication and supply of specialized tooling and test equipment for prime contractors supporting Air Force B-1B actuator overhaul projects. The provider is responsible for delivering equipment that is either identical to Government part numbers or approved substitutes as specified in TO 8C1-27-3-3. All substitute equipment must undergo a validation process using drawings and schematics for review by PCO and Engineering in accordance with PWS 1-6-2. Managed by the Department of Defense under agency FA8118 Afsc Pzabb, the contract requires the delivery of fully calibrated and validated ST/STE. The opportunity falls under NAICS code 333517, with a response deadline set for October 15, 2026.

Machine Tool Manufacturing

POSTED

DEADLINE

Actuator Consumable Parts SupplyThis subcontract, managed by the Department of Defense agency FA8118 Afsc Pzabb, involves the supply of certified new replacement consumable parts for prime contractors working on Air Force B-1B actuator overhaul projects. The scope of work specifically requires the provision of authentic components, including Packing Preforms and Spiral Pins, to satisfy 100 percent replacement mandates. To ensure compliance with PWS 1.9.6, the provider must deliver full sourcing records and complete serial number traceability for all parts. The opportunity was posted on October 2, 2026, with a response deadline of October 15, 2026, falling under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS