Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Specialized Materials Supply

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the supply of aerospace-grade materials, including corrosion-resistant alloys and advanced composites, specifically for the manufacturing of an access cover. All materials must be accompanied by full traceability records and official certifications to meet stringent aerospace industry standards, ensuring material integrity and compliance with operational requirements. The procurement is structured as a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with the NAICS code 331492 indicating classification under Other Foundry Products. Materials must be sourced, produced, and documented to maintain consistent quality across the supply chain, with adherence to defense-specific quality assurance protocols. The solicitation opened on July 28, 2026, with responses due by August 7, 2026, providing a ten-day window for qualified suppliers to submit proposals. The place of performance and point of contact details are not specified, but the requirement for traceability and certification implies that all deliveries must align with defense logistics standards. The contract is accessible through the DIBBS platform and is intended for suppliers capable of meeting the technical and compliance demands of aerospace applications within the military sector.

General Info

Supply aerospace-grade materials with full traceability for defense access cover by August 7, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

331492 - Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)View NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of aerospace-grade materials such as corrosion-resistant alloys or composites required for manufacturing the access cover, with full traceability and certifications.

Similar Contracts

Same NAICS industry code

Domestic Material Sourcing & Compliance (Berry Amendment / Buy American)This contract requires the sourcing and certification of domestically produced metal alloys to meet the stringent requirements of the Berry Amendment and the Buy American Act, ensuring full compliance for defense procurement applications. All materials must be wholly manufactured in the United States from raw materials mined, processed, and produced domestically, with strict documentation to verify origin and adherence to federal defense sourcing regulations. The work is performed under a subcontract arrangement with a specified place of performance in New Cumberland, Pennsylvania, and the materials will support critical national defense systems. The solicitation is open for responses until August 5, 2026, with a posted date of July 28, 2026, under the NAICS code 331492 for other aluminum rolling, drawing, and extruding. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, and bidders must demonstrate proven capability in supplying certified, compliant metal alloys with full traceability and quality assurance documentation. Failure to meet domestic content thresholds or certification standards will result in non-compliance and potential disqualification, making rigorous adherence to regulatory guidelines essential for bid success.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Material Supply – Forged Alloy ComponentsThe contract calls for the supply of raw forged blanks or semi-finished components made from nickel-based alloys that must comply with ASTM B124 or MIL-B-16166 specifications, intended for final machining into coupling halves. All materials must meet stringent quality and compositional standards to ensure performance under demanding operational conditions, with the end use tied to critical fluid handling applications. The requirement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, meaning only small businesses are eligible to bid, and the NAICS code 331492 confirms the classification under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and performance is to be carried out in San Diego, California, with a ZIP code of 92136-3581. The contracting activity falls under the Department of Defense’s Fluid Handling Division, indicating the components will support defense-related systems. While no point of contact is listed, the official portal for submission and additional details is accessible via the provided DIBBS link, and all bidders must ensure compliance with material specifications, delivery timelines, and small business certification requirements to qualify for award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supplier of Raw Materials or Specialty ComponentsThe contract requires the supply of high-purity metals, insulating materials, or specialty components critical to the manufacturing of electromechanical systems qualified by the Department of Defense. All materials must meet strict quality standards with full traceability throughout the supply chain, ensuring compliance with defense-grade specifications and regulatory requirements. The products are intended for use in nuclear reactor systems under the NUCLEAR REACTOR PROGRAM, necessitating precise material integrity and adherence to military-grade performance criteria. Subcontractors must respond by August 3, 2026, with all submissions aligned to the NAICS code 331492, which categorizes other metal working machine shops. The solicitation does not specify set-aside status or geographic restrictions, and performance is not tied to a defined location, but all deliverables must support the DoD’s nuclear infrastructure needs without compromise. Traceability documentation, material certifications, and compliance verification are mandatory, and suppliers must be prepared to demonstrate adherence to defense supply chain security protocols.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Domestic Raw Material Supply (Metal Stock)The contract requires the supply of certified raw metal stock, such as stainless steel or specialty alloys, that strictly adheres to military material specifications including AMS and MIL-SPEC standards. These materials are intended for use in the manufacturing of ring spacers, a critical component in defense-related applications where dimensional precision and material integrity are paramount. All supplied metal must be domestically sourced and accompanied by full certification verifying compliance with the required technical and quality benchmarks. The solicitation is structured as a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The request was posted on July 28, 2026, and responses are due by August 5, 2026. The North American Industry Classification System code 331492 indicates the focus on other metal profile rolling and drawing activities, aligning with the specialized nature of the material supply. Bidders must ensure their offerings meet the exacting standards of military-grade production environments and be prepared to provide documentation demonstrating traceability, certification, and adherence to approved specs.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Materials Supply for Bracket AssemblyThe contract pertains to the supply of military-specification raw materials and sub-components, including alloys and fasteners, that meet exacting standards such as MIL-DTL and AMS for use in the production of precision brackets. These materials must comply with Department of Defense specifications to ensure compatibility, durability, and performance in high-stakes aerospace and defense applications. The solicitation is structured as a subcontract, targeting qualified suppliers capable of delivering certified materials under stringent quality controls and traceability requirements inherent to military-grade manufacturing. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026, giving potential vendors a brief window to submit proposals. It falls under NAICS code 331492, which classifies it within the Other Nonferrous Metal Production and Processing industry. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, indicating this is part of a broader defense supply chain initiative. While specific performance locations and point of contact details are not provided, the contract must be accessed and responded to via the DIBBS portal using the referenced solicitation number SPE4A726Q0898, emphasizing strict adherence to federal procurement protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Materials and Raw Stock SupplyThe contract entails the supply of certified aerospace-grade raw materials, specifically titanium bar stock and aluminum forgings, with full traceability and accompanying mill test reports that meet stringent military specifications. These materials must adhere to established aerospace industry standards to ensure structural integrity, performance, and reliability in critical defense and aviation applications. All deliveries require comprehensive documentation to verify composition, processing history, and compliance with applicable military and regulatory requirements. This is a subcontract solicitation issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a response deadline of August 5, 2026. The North American Industry Classification System code 331492 identifies the scope as other fabricated metal product manufacturing, indicating the focus on precision-engineered raw stock rather than finished components. The materials are intended for use in defense platforms and must be sourced from qualified suppliers capable of maintaining rigorous quality control and audit-ready records throughout the production chain. Performance is expected to support downstream manufacturing operations within the Department of Defense supply network.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Knife Blade Material Supply (Bronze Alloy)The contract solicits the supply of bronze alloy material specifically for knife blades, requiring adherence to modern equivalents of the obsolete MIL-B-16541 Grade A specifications, ensuring material compatibility with existing military-grade blade manufacturing standards. The material must meet precise mechanical, chemical, and dimensional requirements to maintain performance, durability, and interoperability with legacy and current equipment systems. This subcontract is issued under NAICS code 331492, indicating a focus on other nonferrous metal rolling, drawing, and extruding, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 28, 2026, with responses due by August 11, 2026, and the place of performance is designated as FPO, 96662, suggesting delivery to military addresses overseas or in transit. The contract does not specify a set-aside category, leaving eligibility open to all qualified contractors regardless of business size or status. Interested parties must ensure compliance with the technical specifications and deliverables outlined in the full solicitation document accessible through the provided DIBBS link, as failure to meet the material equivalence standards will result in rejection.

Defense Logistics Agency

POSTED

DEADLINE

Precision Copper Conductor Supply (OFHC Copper)The contract involves the supply of Oxygen-Free High-Conductivity (OFHC) copper conductors specifically engineered for precision magnet windings, requiring strict adherence to high-purity standards, tight dimensional tolerances, and maximal electrical conductivity. The materials must meet technical specifications critical to performance in high-precision electromagnetic applications, ensuring minimal impurities and consistent mechanical and electrical properties across all delivered lots. This is a subcontract under the Department of Energy, managed by Jefferson Labor, with the place of performance located in the 23606 zip code area. Responses are due by August 18, 2026, and the opportunity was posted on July 28, 2026, with the North American Industry Classification System code 331492 indicating it falls under Other Nonferrous Metal Rolling, Drawing, and Extruding. There is no set-aside designation specified, and the contract is intended for fulfillment through a subcontracting arrangement. All suppliers must ensure compliance with the required conductivity and purity benchmarks to qualify for award, and full technical documentation will likely be necessary to demonstrate conformance with the stringent performance criteria for magnet winding applications.

Jefferson Labor - DOE Contractor

POSTED

DEADLINE

Supply of Raw Materials or Electronic Components

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Titanium Sheet Supply (6AL-4V, AMS4911)The contract requires the supply of 24,000 inches of titanium sheet made from alloy 6AL-4V, fully compliant with the AMS4911 specification, with no fabrication or processing included. Full traceability and complete mill test documentation must accompany the material to ensure conformance to aerospace-grade standards. The material is intended for direct use without modification, emphasizing the importance of material integrity and documentation accuracy. The solicitation was posted on July 27, 2026, with a response deadline of July 31, 2026, and is structured as a subcontract under the NAICS code 331492 for other nonferrous metal rolling and extruding. The contracting activity stems from the DLA Fleet Readiness Center at DLA Beachey Road Building, and the place of performance and point of contact details are not specified in the data provided. The official solicitation can be accessed via the DIBBS system using the provided link.

DLA FLEET READINESS CENTER DLA BEACHEY ROAD Building

POSTED

DEADLINE

Stainless Steel Hollow Bar SupplyThe contract is for the supply of stainless steel hollow bars that will serve as critical component materials in the fabrication of mooring machines, requiring strict adherence to dimensional and metallurgical specifications to ensure performance and reliability under demanding operational conditions. All materials must meet precise quality standards to support the structural integrity and functionality of the final assembled equipment. The solicitation is designated as a total small business set-aside under SBA guidelines, ensuring that only small business concerns are eligible to bid, and is classified under NAICS code 331492 for other fabricated metal product manufacturing. The contract is issued under the Department of Defense through the W071 Endist Portland office, with performance required at a location in Portland, Oregon, 97210. Bidders must submit their proposals by the deadline of July 31, 2026, at 5:00 PM, following the competitive subcontracting process outlined by federal procurement rules. As this is a subcontract opportunity, responders are expected to provide capable, compliant manufacturing and delivery capabilities without the need for direct government oversight beyond compliance and quality assurance requirements.

W071 Endist Portland

POSTED

DEADLINE

Stainless Steel Round Bar Supply (Type 316)The contract involves the supply of Type 316 stainless steel round bars with a diameter of 1.000 inches and a length of 12.00 inches, specifically designated under CLIN 0002, requiring strict adherence to defined metallurgical and dimensional specifications to ensure quality and performance. The opportunity is structured as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses are eligible to compete, and it falls under the NAICS code 331492 for other fabricated metal product manufacturing. The solicitation was posted on July 27, 2026, with a submission deadline of July 31, 2026, at 5:00 PM, and performance is expected to be delivered to Portland, Oregon, with a ZIP code of 97210. The contracting agency is the Department of Defense through the W071 Endist Portland office, indicating the end use is likely for defense-related applications requiring high corrosion resistance and mechanical integrity.

W071 Endist Portland

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

PANEL, STRUCTURAL, AI

Solicitation # SPE4A7-26-Q-0920

The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.

Fabricated Structural Metal Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-599R

The contract pertains to the procurement of a HASP, HALF item identified by NSN 5342-00-316-0149, with a quantity of six units to be delivered within 20 days FOB origin. All packaging must comply with MIL-STD-2073-1E standards, including specific preservation methods, wrapping materials, unit containers, and intermediate packaging as designated by code, and marking must adhere to MIL-STD-129 without special markings. The item's technical data is available unrestricted, and sampling for quality verification follows MIL-STD-1916 or comparable zero-based plans, with attributes classified according to specified verification levels or AQLs unless otherwise defined. The technical data package references drawings dated 1972 and 1984 under part number 11655291 and is governed by the DLA Master List of Technical and Quality Requirements. Delivery is directed to a facility in Nantou County, Taiwan, with no variance permitted in quantity and inspection and acceptance occurring at the origin. The solicitation number is SPE4A7-26-T-599R, with a response deadline of August 6, 2026, and the contract falls under NAICS code 332994. The point of contact is Lexus Henry, and transportation and freight forwarding are governed by DLA procedural notes C19 and C20.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

ATTITUDE INDICATOR

Solicitation # SPE4A7-26-R-X975

The contract pertains to the procurement of a single Attitude Indicator identified by NSN 1680-01-657-6918, manufactured by RIEKER INSTRUMENT CO., INC. with part number 5002-R, under solicitation SPE4A7-26-R-X975, issued as a Total Small Business Set-Aside. The item is subject to a Firm Fixed Price arrangement with no variance allowed in quantity, and delivery is required within 87 days after award. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and marking as per MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and transportation details reference DLAD procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List, including tailored quality provisions, inspection protocols, and the requirement for zero non-conformances under a zero-based sampling plan aligned with MIL-STD-1916 or ASQ H1331, with verification levels assigned based on critical, major, and minor attributes. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and physical identification of the item must meet RQ017 marking requirements. All covered defense information is controlled under RD002, and the contractor must follow government procedures for removal of identification from non-accepted items.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-T-599Q

This contract is for the procurement of 14 units of a PLUG, MACHINE THREAD with NSN/Part Number 5365-01-490-0332, under solicitation SPE4A7-26-T-599Q, with a response deadline of August 6, 2026, and delivery expected 171 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Technical data associated with this item is governed by DFARS 252.225-7048, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, are permitted access. The placing organization is the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with performance location in New Cumberland, Pennsylvania, and primary point of contact Brandon Smith at brandon.1.smith@dla.mil.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

ARM, ACTUATING VANE

Solicitation # SPE4A7-26-T-599K

The contract pertains to the procurement of 5,059 units of an ARM, ACTUATING VANE with NSN 2840-00-199-5235, issued under solicitation SPE4A7-26-T-599K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any transfer, including electronic disclosure to foreign persons within or outside the United States, requires explicit government authorization. DFARS 252.225-7048 governs the handling of this controlled information, and access is restricted to contractors certified under the U.S./Canada Joint Certification Program who have completed mandatory DLA training and approval processes. Delivery is scheduled 547 days after award, with the place of performance located at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, under a NAICS code 336412 indicating aircraft and missile propulsion systems manufacturing. The primary point of contact for inquiries is Mahlon Marcus, reachable via email and phone. The acquisition is designated as a federal procurement with no set-aside classification. All parties handling the technical data must comply with stringent controls to prevent unauthorized disclosure, extending to U.S. companies and their foreign subsidiaries, and DLA mandates additional verification steps before granting access to the controlled technical information.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

DUCT ASSEMBLY, AIR COND

Solicitation # SPE4A7-26-Q-0921

The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.

Sheet Metal Work Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600C

This contract specifies the procurement of two Terminal, Stud units under solicitation SPE4A7-26-T-600C, with a required delivery within 20 days of contract award and an original required delivery date of April 23, 2026. The item is identified as a commercial off-the-shelf (COTS) product with NSN 5940-01-702-8684 and part number ST71038, supplied by Regal Beloit America, Inc. The units must be delivered FOB origin, with no variance allowed in quantity, and inspected and accepted at the destination point. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with five units per pack as specified, and all DLA Master List of Technical and Quality Requirements take precedence. Palletization must meet DLA Packaging Requirements for Procurement, and the shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post. The delivery destination is N42420, LCSRON 1 DET MPSF NBVC, Building 1392, Port Hueneme, CA 93043, with assigned freight and tracking identifiers. Price is $2.00 per unit for a total of $4.00. All technical and quality specifications referenced through R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and the contract includes specific government-use-only fields for internal tracking and disposition.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

RETAINER, HEATING UN

Solicitation # SPE4A7-26-T-600G

The contract is for the procurement of two retainers, heating units, identified by NSN 1450013612849, under solicitation SPE4A7-26-T-600G, issued by the Department of Defense through the Defense Logistics Agency. The unit of issue is each, with a total quantity of two units required at a specified unit price, and the total price reflects this quantity. Delivery is required within 20 days of contract award, with FOB origin terms meaning the supplier is responsible for delivery to the origin point only. Inspection and acceptance both occur at origin, and the items must be packed according to MIL-STD-2073-1E with specific packaging methods including preservative treatment type 31, no clamping or drying, and no cushioning material. Packaging must comply with DLA’s RP001 palletization standards and marking requirements as per MIL-STD-129, with no special marking codes applied. The delivery destination is the Naval Supply Center in Jinhae-gu, Changwon-si, South Korea, under the NLC ROK Navy designation. Freight forwarding instructions reference DLA procedural notes C19 and C20, with multiple forwarders permitted. The required delivery date is August 8, 2025, and the contract was posted on July 29, 2026, with a response deadline of August 6, 2026. The primary point of contact is Lexus Henry of the ASC Supplier Oper AE and AF Division, reachable via phone and email. The item falls under NAICS code 333924 and is categorized as a federal solicitation with no set-aside designation.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

LEAD, ELECTRICAL

Solicitation # SPE4A7-26-Q-0922

The contract is for the procurement of 22 electrical lead terminal strips, identified by NSN 5995-01-722-1565, under solicitation SPE4A7-26-Q-0922 with a response deadline of August 7, 2026, and a delivery requirement of 125 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards, removal of government identification from non-accepted supplies, and tailored higher-level quality controls for both manufacturers and non-manufacturers. The contract mandates compliance with inspection and acceptance at origin, physical marking of bare items, and strict export control protocols under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons or entities regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization from the DLA controlling authority may access the controlled technical information. Additionally, the contractor must be certified by a Cybersecurity Maturity Model Certification Level 2 C3PAO, ensuring adherence to cybersecurity standards. The solicitation is issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with Renee Bynum as the primary point of contact.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 13 hours ago

DEADLINE

TOW COLLAR, LANDING GEA

Solicitation # SPE4A7-26-T-600P

The contract is for the procurement of two TOW COLLAR, LANDING GEAR units with NSN 1620-01-073-1108 under solicitation SPE4A7-26-T-600P, issued by the Department of Defense through the Defense Logistics Agency. The requirement is designated as a Total Small Business Set-Aside under NAICS code 336413, with responses due by August 6, 2026, and delivery expected within 163 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with DLA packaging standards, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory, and the item is subject to Covered Defense Information requirements. The technical data associated with this part is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, even within the United States, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access the data. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and performance is to occur at Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at DLA.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600B

This contract is for the procurement of 1,087 units of a spacer sleeve identified by NSN 5365-01-285-9796 and part number NAS42DD6-48N, classified as a commercial item under the DLA acquisition system. The item must comply with a comprehensive set of technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for inspection at origin, government identification removal, physical marking, and test equipment calibration. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging standards, and all labeling must reflect the specified unit of issue and quantity per unit pack. The item is designated as a critical application component and must meet the technical specifications of NAS42 Revision 11 dated 10/31/2012. Delivery is required FOB origin within 86 days, with strict zero tolerance for quantity variance and acceptance also taking place at origin. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels are assigned based on attribute classification. The contract specifies a unit price and total value but does not include a shelf life requirement. All shipments must be directed to the DLA Distribution Depot at Hill AFB, Utah, with transportation protocols outlined in DLAD Proc Notes C19 and C20. The required delivery date is April 16, 2027, with an initial ship date of November 1, 2026, under solicitation SPE4A7-26-T-600B, issued by the Department of Defense’s ASC Supplier Operations division.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 13 hours ago

DEADLINE

PLATE, STRUCTURAL, AI

Solicitation # SPE4A7-26-T-600A

The contract is for the procurement of 16 structural plates designated for aircraft use, identified by part number 68A350868-2010 and NSN 1560-01-291-2535. The item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have received explicit approval from DLA. Packaging must adhere to DLA procurement standards, and physical identification of the item must follow specified marking requirements. Cybersecurity compliance is enforced through CMMC Level 2 certification for any assessed third-party organizations involved. The solicitation number is SPE4A7-26-T-600A, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 6, 2026, and an expected delivery timeline of 166 days after award. Performance will occur at Robins Air Force Base, Georgia, with Mahlon Marcus listed as the primary point of contact. The NAICS code 336413 applies, indicating the item falls under aircraft manufacturing. No set-aside classification is specified, and the contract is open to federal contractors meeting all export, cybersecurity, and packaging requirements. The technical data associated with the item is tightly controlled, and failure to comply with export regulations or handling protocols will result in contract violation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE