Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Specialized Quality Assurance and Inspection Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves providing specialized quality assurance and inspection services focused on Pitch Horn Assemblies, ensuring these components meet the stringent requirements outlined in MIL-STD-2175 and AMSC N standards. The scope includes performing independent inspections and testing, which encompass non-destructive testing methods as well as functional verification, to validate the reliability and compliance of the assemblies. The subcontract is managed by the Defense Logistics Agency (DLA) Aviation under the Department of Defense and is designated under the NAICS code 541380, which pertains to specialized design services. The work is to be performed in Richmond, with a zip code of 23237. The contract was posted on June 8, 2026, although no specific solicitation number or set-aside category is provided. This opportunity ensures adherence to critical quality standards, supporting defense-related aviation components' operational integrity.

General Info

Specialized quality assurance and inspection services for Pitch Horn Assemblies under MIL-STD-2175 compliance.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Richmond, VA, 23237, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4FA725R0513.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

1615012149140 / PITCH HORN ASSEMBLY / HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 8

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent inspection and testing of Pitch Horn Assemblies to ensure compliance with MIL-STD-2175 and AMSC N requirements, including non-destructive testing and functional verification.

Similar Contracts

Same NAICS industry code

Contractor First Article Testing (FAT) Services

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in about 1 month

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

City of Red Deer - Request for Quotes - WTP - Laboratory Water Analysis

Solicitation # AB-2026-06241

The City of Red Deer is seeking quotations from qualified vendors to provide laboratory water analysis services for its Water Treatment Plant. This solicitation, identified by number AB-2026-06241, is aimed at securing professional analytical services to support the city's water treatment operations in Red Deer, Alberta. Interested respondents must submit their quotations by the deadline of October 2, 2026, at 10:00 PM. The procurement process is managed by Lindsey Flaman, the Procurement and Contract Specialist, who serves as the primary point of contact for this opportunity.

City of Red Deer

POSTED

about 13 hours ago

DEADLINE

Geotechnical Investigation & Lab Testing

Department of Environmental Protection

POSTED

about 14 hours ago

DEADLINE

Non-Destructive Testing (NDT) & Inspection

Ok DLA Aviation At Oklahoma City

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Functional Characterization and Assay Laboratory Services

FDA Office Of Acq Grant Svcs

POSTED

about 17 hours ago

DEADLINE

First Article Testing and Production Lot Validation

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Water Quality Analytical Testing (Public Water Supply & PFAS)

Colorado State Office

POSTED

about 17 hours ago

DEADLINE

Ballistic Coupon & First Article Testing Services

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

Ballistic and First Article Testing (FAT) Services

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

2026 RFO HAYSTACK WELL WATER ANALYSIS

Solicitation # 140L1726Q0065

Colorado State Office

POSTED

about 17 hours ago

DEADLINE

Hood Inspection and Certification for Laboratory Service

Solicitation # 36C24426Q0840

244-NETWORK Contract Office 4 (36C244)

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NSN 4810-01-187-9275, PART NUMBER 300310-101, DESCRIPTION: SLEEVE AND SLIDE, DI

Solicitation # SPE4A526R0304

The Defense Logistics Agency Richmond is conducting market research to identify capable sources for the manufacture and supply of 42 units of Sleeve and Slide, DI, part number 300310-101, NSN 4810-01-187-9275. This sources sought notice is for informational purposes only and does not constitute a formal solicitation or request for proposals. The procurement falls under NAICS code 332911, and the government is evaluating the market to determine if the requirement should be set aside for small businesses or pursued through full and open competition via a firm-fixed price contract. Interested parties must submit their organization's contact details and a tailored capability statement to Courtney Minor by 4:30 PM EST on September 16, 2026. Potential providers must demonstrate the capacity to handle all labor, materials, and equipment necessary for new manufacture, including component procurement, testing, packaging, and shipping. The government will assess the financial, technical, and human capital resources of respondents to ensure they can meet the scope and scale of the requirement.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

FY27-2A Foreign Bearings Waiver Package Sources Sought Notice

Solicitation # FY27-2AForeignBearingsWaiverPkgSourcesSoughtforDomesticBearings

The Department of Defense, through DLA Aviation, has issued a sources sought notice to identify viable domestic sourcing for several specific National Stock Numbers (NSNs) currently determined to be foreign manufactured. This effort is conducted in accordance with DFARS 225.7009 and DFARS 252.225-7016 to ensure compliance with domestic sourcing regulations for the listed bearing components. Interested parties should note that the government may not possess or have the authority to distribute all associated technical data, though current procurement item descriptions can be provided upon request. All standard requirements for source approval, configuration control, and part numbering apply. Responses are due by September 24, 2026, under NAICS code 332991.

Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

NSN 1420016869216, GYRO-OPTICS ASSEMBLY, WSDC: 64A HELLFIRE MISSILE

Solicitation # SPE4A626R0322

This solicitation by DLA Aviation is for a Firm Fixed Price contract to procure 48 units of a Gyro-Optics Assembly for the HELLFIRE Missile, identified by part number 13688208. The procurement is designated as a Critical Application Item, with shipping, inspection, and acceptance all occurring at the origin. Lockheed Martin is listed as an approved source for this requirement. The solicitation, numbered SPE4A626R0322, will be issued on September 16, 2026, and close on September 18, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. All solicitation documents are available electronically via the DIBBS system, and no paper copies will be provided.

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

6150-Cable Assembly, Power, Electrical, Virginia Class Submarine

Solicitation # SPE4A626R0323

DLA Aviation is conducting market research to identify qualified parties capable of manufacturing a Power Electrical Cable Assembly for Virginia Class Submarines. The requirement specifically concerns NSN 6150-01-713-3680 and part numbers 8692175-4 and 1151100-103. This sources sought notice is intended to determine the most effective procurement method and whether the eventual contract will be set aside for small businesses or opened for full and open competition. Interested manufacturers must submit their capabilities, including their Cage Code, manufacturing location, and point of contact information, to Joshua Tuggle via email. This is not a formal solicitation or request for proposals, and the government assumes no financial responsibility for costs incurred during this voluntary submission process. Responses are required by September 18, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 17 hours ago

DEADLINE

Sources Sought for a potential Supply Chain Management Contract for F108 Engine Support – Mission Analysis

Solicitation # SPE4AX25RF108-0005

This Sources Sought Notice is issued by DLA Aviation to conduct market research for a potential supply chain management contract supporting the F108 engine. The government is seeking to determine if companies other than CFM International possess the capability to perform critical tasks, including assessing engine usage assumptions and life limited part limitations, updating thermal and stress models, certifying self-locking borescope plugs, and providing comprehensive program management support. The effort is intended to be supported under an existing Performance Based Logistics contract and falls under NAICS code 336413. Interested parties must submit non-proprietary responses by September 17, 2026, to Keith Allgeier. Submissions must include company identification details and demonstrate the firm's experience with the F108 engine, access to necessary engineering data, and a plan for transition and implementation. This notice is for planning purposes only and does not constitute a formal solicitation or a commitment by the government to award a contract.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

NSN 1430-012281363, CARTRIDGE, COMBINATI, WSDC: 39A

Solicitation # SPE4A727R0009

DLA Aviation is issuing a sources sought notice under solicitation SPE4A727R0009 for the procurement of 322 combination cartridges, identified by NSN 1430-012281363. The agency is seeking information on capable manufacturers, including their locations and contact details. Current approved sources include Pioneer Industries, LLC, S I T Corporation, and Arben Enterprises, Inc. Interested parties must submit their responses by September 17, 2026. Source Approval Requests must be handled via a DoDSafe link, which can be requested by emailing dlaavnsmallbus@dla.mil with the company CAGE code and the relevant NSN. The primary point of contact for this requirement is Grayson Andrews.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

DUCT ASSEMBLY, EXHAUST, LEFT HAND / NSN 1560-01-065-1906 / H1 HELICOPTER

Solicitation # SPE4A726R0807

DLA Aviation is seeking a 100% Small Business Set-Aside Indefinite Quantity Contract for the procurement of left hand exhaust duct assemblies, identified by NSN 1560-01-065-1906. The contract features a five year base period with an estimated annual quantity of 40 units. While the item is considered critical, it is not classified as a Critical Safety Item. The procurement requires contractor first article testing and adherence to export controls, with production units delivered FOB Destination and inspection occurring at the origin. The government intends to solicit and negotiate with a limited number of sources under FAR 6.302, though interested parties may submit capabilities or proposals within forty five days of the notice. Technical data is available via DIBBS, and the solicitation is expected to be issued on September 28, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Prospective contractors must be registered in the System for Award Management and should be prepared for a potential reverse auction process.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 2 months

Wire Rope Assembly; PR: 7013064751 NSN: 4010-016863942

Solicitation # SPE4A626R0140

This solicitation from DLA Aviation is for the procurement of 371 units of a Wire Rope Assembly, identified by NSN 4010-016863942. The contract is a HUBZone Small Business Set-Aside, meaning only offers from HUBZone manufacturers or dealers providing a small business manufacturer's product will be considered. The delivery schedule is set for 262 days after receipt of order, with inspection occurring at the origin and shipping terms as FOB Destination. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Offerors must provide specific design and material data according to Basic Drawing NR 19207 12649348, Revision C. Additionally, because the item requires restricted data, contractors must be certified by the DoD to access unclassified data via a submitted DD Form 2345. The solicitation is managed by Melinda Clayton and is expected to close by June 12, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Impeller Assembly [WSDC: 06F] End Item: Aircraft, Hercules C-130, PR: 7007799416 NSN: 6620-004637489

Solicitation # SPE4A626R0129

This solicitation is for the procurement of 70 Impeller Assemblies (NSN 6620-004637489) for the Hercules C-130 aircraft. The contract includes a Government First Article Test of one unit due 180 days after receipt of order, with a total production delivery schedule of 418 days. Terms are FOB Origin for both shipping and inspection. This is a total small business set-aside, and the award decision will be based on price, past performance, and other evaluation factors. Offerors must provide design drawings and data in accordance with Basic Drawing NR 13873 and must be DoD certified to access unclassified data via DD Form 2345. Higher-level contract quality requirements apply under clause 52.246-11. The solicitation is issued by DLA Aviation and is available through the DIBBS portal, with an anticipated closing date of April 10, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 1 month

INSULATION BLANKET, CABIN, AIRCRAFT / NSN 16680-01-559-2036 / CH-47 HELICOPTER

Solicitation # SPE4A727R0008

DLA Aviation is conducting market research to identify capable sources for the manufacture and supply of aircraft cabin insulation blankets, specifically NSN 1680-01-559-2036. This sources sought synopsis is intended to determine the procurement method and whether the requirement will be set aside for small businesses or opened for full competition. The scope of work includes providing all labor, materials, and equipment for new manufacture, as well as managing supply chain logistics, testing, and packaging for a five year base period. Interested parties must submit their organizational details and tailored capability statements to Christopher Rose by September 15, 2026. Because DLA Aviation does not possess complete technical data for this part, any contractor other than the currently approved source, AAR Component Services, must submit a Source Approval Request package. The government will evaluate respondents based on their technical resources, financial capacity, and ability to implement a project management plan that meets tight schedules and cost containment goals.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Makino U86 CNC Wire EDM with Turnkey Services

Solicitation # 27-15-1002

DLA Weapons Support Richmond is conducting market research to identify capable sources for a Makino U86 CNC Wire EDM for Tinker Air Force Base. The requirement is for a turn-key solution that includes the machine, technical data, shipping, unloading, rigging, installation, foundation work, IUID tagging, and training. While the government currently intends to solicit and negotiate with only one source under FAR 6.302, this sources sought notice serves to determine if a competitive procurement is warranted. Interested parties must submit their capabilities via email to the AVN IPE Market Research office by September 19, 2026. Submissions must include the tracking number 27-15-1002 in the subject line and are limited to ten single-sided pages with a minimum 10-point font. This announcement is for informational purposes only and does not constitute a formal solicitation, a request for a quote, or a commitment to award a contract.

Machine Tool Manufacturing

POSTED

DEADLINE

Supply of Specialized O-Rings for F135 Propulsion System

Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS