Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Testing and Certification for Airframe Pan Assembly

Open

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the specialized testing and certification of airframe pan assemblies for the Department of Defense under the DLA Weapons Support Aviation Supply Chain. The selected provider will perform validation of airframe components for prime contractors, conducting tests based on limited rights data and utilizing aviation test rigs or non-destructive testing equipment for final inspections. Key deliverables include comprehensive test reports, certifications of conformance, and the final validated pan assembly, all supported by detailed traceability documentation. To be eligible, contractors must maintain AS9100 quality management systems and hold a valid JCP Certification. The project falls under NAICS code 541380 and is managed by the DLA Weapons Support Aviation Supply Chain ESOC Buys. Interested parties must adhere to the response deadline of November 16, 2026.

General Info

Testing and certification of DoD airframe pan assemblies due by November 16, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

NAICS

541380 - Testing Laboratories and Services

Place of Performance

POL

Set-Aside

NONE

Documents

This scope was carved out of SPE4A0-27-T-0561.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PAN ASSY, AIRFRAME

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs testing and validation of airframe components for prime contractors on DLA Weapons Support Aviation Supply Chain projects. Conducts tests per limited rights data, provides traceability documentation, and performs final inspections using NDT equipment or aviation test rigs. Requires JCP Certification and AS9100 quality management systems. Delivers test reports, certification of conformance, and validated Pan Assembly.

Similar Contracts

Same NAICS industry code

First Article Testing and ValidationThis subcontract for First Article Testing and Validation supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform validation testing on five initial units to ensure the manufacturing process aligns with the Technical Data Package and established quality standards. Work involves using precision testing equipment and metrology to verify material properties and dimensions, and must be conducted within a certified testing facility located in New Cumberland. The primary deliverables for this engagement are five validated units and a formal First Article Test Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on providing critical quality assurance testing for prime contractors fulfilling DLA supply contracts. The scope of work involves executing First Article Testing to validate initial production runs and Production Lot Testing to maintain batch consistency. All activities must align with the Technical Requirements Package and the DLA Master List of Technical and Quality Requirements, utilizing specialized facilities to verify material and structural integrity. The contractor is responsible for delivering formal test reports and CDRL Form DD 1423 to document compliance. This opportunity is categorized under NAICS code 541380, with the place of performance located in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThis subcontract for Quality Assurance and Inspection Services involves the independent verification and sampling of manufactured levers for prime contractors fulfilling DLA supply contracts. The scope of work requires the inspection of critical, major, and minor attributes utilizing coordinate measuring machines, calipers, and precision gauging. All activities must be performed in accordance with DLA Master List requirements and standards MIL-STD-1916 or ASQ H1331, culminating in the delivery of certification of conformance and detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB. Classified under NAICS code 541380, the solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing technical testing services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on conducting First Article Testing on two units followed by Production Lot Testing to ensure quality conformance with the Technical Data Package. The successful contractor is responsible for delivering a First Article Test Report and validated results from the production lot testing. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification for necessary data access. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) ExecutionThis subcontract involves the execution of First Article Testing for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The primary objective is to validate the design and manufacturing processes for 1.5 inch stainless steel valves in accordance with FAR 52.209-3 or 52.209-4. The successful contractor will be responsible for delivering a validated test unit and a formal FAT report to the Department of Defense at the New Cumberland facility. To be eligible for this engagement, providers must hold JCP certification to access export-controlled technical data and maintain CMMC Level 2 compliance. The opportunity was posted on November 8, 2026, with a response deadline of November 19, 2026. The work falls under NAICS code 541380 and is managed through the DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Evaluation and CertificationThis subcontract, titled First Article Test (FAT) Evaluation and Certification, involves performing critical testing for prime contractors on Defense Logistics Agency projects. The primary objective is to validate the design and manufacturing processes of frequency converters using specialized electronic testing and measurement equipment to ensure conversion accuracy. The selected provider will coordinate directly with the Engineering Support Activity for acceptability evaluations and is required to deliver a comprehensive FAT Report along with a certified first article sample. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work is designated under NAICS code 541380. Performance of the contract will take place at Robins Air Force Base. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) and Validation ServicesThis subcontract for First Article Test (FAT) and Validation Services supports the DLA Weapons Support Fluid Handling Division at Tinker AFB. The selected provider will perform critical testing for prime contractors to validate manufacturing processes, specifically executing protocols for dimensional inspection, material verification, and Class 3 thread compliance. These tasks must be completed using high-precision gauging or CMM equipment within a facility that maintains ISO 9001 or SAE AS9003 compliance. The primary deliverables for this engagement include a comprehensive FAT Certification report and one validated first-article unit. This opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

Third-Party Quality Inspection and CertificationThis subcontract for Third-Party Quality Inspection and Certification supports the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent inspection and point-of-origin sampling for prime contractors to verify that dimensions and materials comply with NAS1149 Revision 8. All work must be conducted using calibrated precision measurement tools and follow MIL-STD-1916 or ASQ H1331 sampling plans, with final deliverables consisting of detailed inspection reports and Certificates of Conformance. To be eligible, the contractor must hold ISO 9001 or AS9100 accreditation. The performance of these services is located in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Quality Assurance and Technical Certification for Safety ValvesThis subcontract, issued by the Department of Defense through DLA DIST SAN JOAQUIN, focuses on providing quality assurance and technical certification for safety valves. The selected contractor will perform technical inspections and quality certifications for prime contractors to ensure that valve specifications align with NSN 4820-01-673-7805. Key responsibilities include conducting pressure testing using calibrated rigs in accordance with the DLA Master List of Technical and Quality Requirements and delivering final quality inspection reports and Certificates of Conformance. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties should note the posting date of November 8, 2026, with a response deadline set for November 19, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform destructive and non-destructive testing on three sample washers to ensure dimensions and material properties align with DLA Master List requirements. All work must be conducted using laboratory-grade measurement and test equipment in New Cumberland. To qualify, the provider must maintain ISO/IEC 17025 accreditation or demonstrate compliance with ISO 9001/AS9003 standards. The primary deliverables for this engagement include a comprehensive FAT Test Report and a formal certification of compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing (PLT) SupportThis subcontract opportunity is for Production Lot Testing support benefiting the Department of Defense under the DLA Weapons Support Electrical Devices Division. The selected contractor will be responsible for coordinating production lot testing for prime contractors, which includes selecting random samples for Government Quality Assurance Representative review, preparing comprehensive test data packages with material certifications and inspection sheets, and managing traceable shipping to the Redstone Technical Test Center. The final deliverable consists of five validated test samples along with all necessary supporting documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to be considered for this specialized quality assurance and logistics coordination role.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

Hoist Hook Manufacturing and SupplyThis subcontract involves the manufacture and supply of hoist hooks for prime contractors supporting the Department of Defense, specifically for DLA Weapons Support Aviation Supply Chain projects. The contractor is responsible for providing one hoist hook that strictly adheres to NSN 4030251509073 specifications. Compliance requirements include the provision of Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313. Additionally, all shipping containers must be marked according to MIL-STD 129. The project falls under NAICS code 332999, with performance taking place at FPO 96349.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

QPL/QML Electrical Insulation Sleeving SupplierThis subcontract opportunity is for the supply of specialized electrical insulation sleeving to support prime contractors delivering on DLA supply contracts for the Department of Defense. The requirement is for two feet of black, size 5 AWG, type F, form U, subform UA, grade C, class 1, category 1 material under NSN 5970-00-845-4910. All materials must be sourced from QPL/QML certified manufacturing lines to ensure strict adherence to quality standards. The contract mandates compliance with MIL-STD-1916 or ASQ H1331 for sampling and requires packaging to meet MIL-STD-129 and ASTM D3951 standards. Performance will take place at Wheeler Army Airfield. Interested parties must respond by November 16, 2026, under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

Aviation Cable Assembly SupplierThis subcontract involves the procurement of one unit of a specific cable assembly, identified by NSN 6150-01-578-5485, to support the Department of Defense through DLA Weapons Support Aviation Supply Chain ESOC Buys. The selected supplier is responsible for manufacturing or sourcing the assembly according to strict technical specifications and ensuring delivery via the fastest traceable shipping method to meet RDD and NMCS requirements. Performance will take place at Joint Base Lewis McChord. The contract mandates strict adherence to NIST SP 800-171 standards for the basic safeguarding of covered contractor information systems. Interested parties must have responded by the deadline of November 16, 2026, under NAICS code 336411. The primary objective is the successful delivery of the completed cable assembly to the prime contractor.

Aircraft Manufacturing

POSTED

about 2 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services involves providing specialized preparation for aviation components destined for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for packaging adapters according to MIL-STD-2073-1E standards, specifically utilizing QUP 001, Preservation Method 10, and Cleaning/Drying 1. Additionally, all items must be marked in compliance with MIL-STD-129, using military-specification preservatives and containers to ensure the components survive transit. The project is managed under NAICS code 561910 for the Department of Defense. Finished adapters are to be delivered packaged and marked for shipment FOB Origin to Quantico, Virginia. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

Precision Machining/Fabrication of Adapter, InstandsetThis subcontract involves the precision machining and fabrication of one unit of the Adapter, Instandset, for prime contractors supporting DLA aviation supply contracts. The item is classified as a Critical Application Item and must be manufactured strictly according to reference drawings D9448 and 30003 using precision CNC machining, with a specific prohibition against additive manufacturing. The contractor must maintain SAE AS9003 or ISO 9001 quality systems and ensure compliance with NIST SP 800-171. Quality assurance requires zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331. The final deliverable is one finished and inspected adapter to be performed in Quantico, Virginia, under the agency of the Department of Defense DLA Weapons Support Aviation Supply Chain.

POSTED

about 2 hours ago

DEADLINE

Fabrication of Terminal Cover (Critical Application)This subcontract involves the precision manufacturing of a single Terminal Cover, part number R0183011, for the Department of Defense under the DLA Weapons Support Aviation Supply Chain. The project requires the use of precision machining equipment to meet critical aviation application standards, specifically adhering to Type I Code W quality assurance testing and a 120-month shelf-life specification. The work is categorized under NAICS code 332721 and will be performed in Middletown. Interested parties must respond by November 16, 2026, to fulfill the requirements for this critical aviation component.

Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Terminal Cover (PN R0183011)This subcontract involves the procurement and delivery of one Terminal Cover, part number R0183011, to support DLA Weapons Support Aviation Supply Chain projects. The selected provider is responsible for ensuring the item is packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The delivery terms are FOB Origin with the final destination being Middletown, Iowa. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements. Quality assurance must be verified through inspection per MIL-STD-1916 or ASQ H1331. This requirement is issued by the Department of Defense under NAICS code 423830, with a response deadline set for November 16, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Aviation-Grade Electrical Wire and Connector SupplyThis subcontract focuses on the procurement of aviation-grade electrical wire and connectors to support prime contractors under the DLA Weapons Support Aviation Supply Chain. The scope of work involves sourcing high-reliability electrical connectors and shielding that strictly adhere to Basic Drawing 30554 04-20422, along with the delivery of certified raw materials and specialized wiring. To ensure quality and regulatory compliance, the provider must furnish Material Certifications and Certificates of Conformance that verify adherence to the Buy American Act and critical application standards. This effort falls under NAICS code 335220 and is managed by the Department of Defense for the DLA Weapons Support Aviation Supply Chain ESOC Buys.

Major Household Appliance Manufacturing

POSTED

about 2 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain projects. The contractor is responsible for manufacturing one completed, inspected, and packaged assembly in strict accordance with Basic Drawing 30554 04-20422 Revision H. Quality assurance must be maintained through a zero-based sampling plan following MIL-STD-1916 or ASQ H1331 standards. To be eligible, the provider must hold either SAE AS9003 or ISO 9001 quality certification and demonstrate compliance with NIST SP 800-171. The project falls under NAICS code 334418, with a response deadline set for November 16, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Hamilton Sundstrand Straight Headless Pin (NSN 5315-01-507-9965)This subcontract involves the procurement of one genuine Hamilton Sundstrand straight headless pin, part number 711169GD, to support DLA Weapons Support Aviation Supply Chain projects. The item must be manufactured and supplied in accordance with ISO 9001:2015 standards, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 requirements. The successful contractor is required to maintain Buy American compliance and provide a CMMC Level 2 self-assessment. The final deliverable is to be shipped to the US Army SSA 173rd BDE located in Vicenza, Italy. This opportunity falls under NAICS code 423840 and is managed by the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Machine Key SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, requires the manufacture or sourcing of one machine key to meet NSN 014256214/5315 specifications. The supplier is responsible for ensuring the component is packaged according to MIL-STD-2073-1E and RP001 and marked in compliance with MIL-STD-129. Delivery is required FOB Destination to FPO 96349. The contract falls under NAICS code 332510 and mandates strict adherence to the DFARS 252.225-7001 Buy American and Balance of Payments Program. Interested parties must respond by November 16, 2026, to provide the necessary components for prime contractors delivering DLA supply contracts.

Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

Accredited Assembly and Distribution of Electrical Insulation SleevingThis subcontract involves the accredited assembly and distribution of electrical insulation sleeving for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain projects. The selected provider will be responsible for performing final assembly by cutting components into four-foot lengths, applying marking code 33 for shelf-life items, and ensuring all packaging adheres to MIL-STD-2073-1E and MIL-STD-129 standards. To be eligible, the contractor must hold PRI QML or QPL accreditation as an assembling distributor. The scope of work culminates in the delivery of finished, packaged, and marked insulation sleeving, with performance taking place in Tampa, Florida. This opportunity falls under NAICS code 423610 and requires responses by November 16, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Product Verification Testing (PVT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Quality Inspection and Sampling Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Ballistic Quality Assurance and Production Lot Testing (PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Specialized Electrical Testing Laboratory (FAT)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing (PLT)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

CSI Quality Assurance and Metrology Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing and Quality Validation

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) and Quality Assurance

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article Testing and Quality Validation

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS