Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Testing and Instrumentation Services

Active

SBIR / STTR

Response Deadline11/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the U.S. Air Force provides specialized testing and instrumentation services for prime contractors working on DoD SBIR/STTR projects. The scope of work includes high-speed imaging, pressure sensing, flow measurement, and environmental testing for waterborne effluents and airborne emissions. The selected provider is responsible for delivering comprehensive performance validation reports and test data while maintaining strict compliance with all local, state, and federal hazardous waste laws. This is a Total Small Business Set-Aside under NAICS code 541380, specifically mandated for SBIR/STTR participants with fewer than 500 employees. The solicitation was posted on October 28, 2026, and requires a response by November 25, 2026.

General Info

US Air Force small business subcontract for specialized testing and instrumentation services.

Agency

U.S. Department of Defense → U.S. Air Force

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

SBA

Documents

This scope was carved out of DAF27BZ01-NV001.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Shallow Jet Spurt Engineering Model

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 25

Submission deadline

Response Deadline

11/25/2026, 05:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyU.S. Department of Defense → U.S. Air Force

ContactsNo contacts available

OfficeN/A

Organization / AgencyU.S. Department of Defense → U.S. Air Force

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides testing facilities and instrumentation for prime contractors on DoD SBIR/STTR projects. Performs high-speed imaging, pressure sensing, flow measurement, and environmental testing for airborne emissions and waterborne effluents. Must comply with federal, state, and local environmental laws for hazardous waste. Delivers test data and performance validation reports.

Similar Contracts

Same NAICS industry code

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 3 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

First Article Testing (FAT) and Thread Gaging ServicesThis subcontract opportunity is for the provision of independent laboratory testing and certification services to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on conducting First Article Testing and thread gaging for Class 3A and 3B threads to ensure strict compliance with SAE AS8879 Category 1 or MIL-S-7742 standards. The successful provider must deliver a certified First Article Test Report and maintain professional accreditation through either ISO/IEC 17025 or AS9100. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The place of performance is located at Robins Air Force Base. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

More opportunities from U.S. Department of Defense → U.S. Air Force

Same awarding agency

Technical and Business Assistance (TABA) ServicesThis subcontract for Technical and Business Assistance services supports prime contractors on US Air Force SBIR projects. The primary objective is to develop a commercialization strategy and conduct extensive market research to facilitate the integration of 2-micron fiber amplifiers into Air Force systems. Key deliverables include a formal commercialization plan, intellectual property strategy, transition planning, and detailed market analysis reports. The opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate for companies with fewer than 500 employees, falling under NAICS code 541611. Managed by the U.S. Department of Defense for the U.S. Air Force, the solicitation was posted on October 28, 2026, with a response deadline of November 25, 2026.

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

Optical Performance Validation & TestingThe Optical Performance Validation and Testing subcontract is a U.S. Air Force initiative focused on the independent verification and validation of amplifier performance for prime contractors working on Low SWaP 2-micron fiber amplifier projects. The selected provider will be responsible for characterizing spectral purity, noise figure, and gain using beam profilers and Optical Spectrum Analyzers, ultimately delivering comprehensive performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support this Department of Defense effort.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

High-Power Pump Laser SupplyThis subcontract opportunity with the U.S. Air Force focuses on the supply of high-brightness pump laser sources for prime contractors working on Low SWaP 2-micron fiber amplifier projects. The scope of work involves the manufacture and testing of pump diodes designed for high stability at specific wavelengths necessary for 2-micron amplification, as well as the delivery of pump laser modules featuring integrated controllers and drivers. The procurement is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricted to firms with fewer than 500 employees. Interested parties must respond by November 25, 2026, regarding this requirement categorized under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Low SWaP Optomechanical PackagingThis subcontract for the U.S. Air Force focuses on the design and fabrication of optomechanical packaging for Low SWaP 2-micron fiber amplifier projects. The scope of work involves using CNC machining on ceramics and lightweight alloys to produce precision alignment mounts and enclosures featuring integrated thermal management. The final deliverables include internal mounting brackets and completed amplifier chassis provided to prime contractors. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026.

POSTED

about 8 hours ago

DEADLINE

Specialized 2-Micron Optical Fiber SupplyThis subcontract with the U.S. Air Force focuses on the supply of specialized active and passive optical fibers for Low SWaP 2-micron fiber amplifier projects. The scope of work involves the manufacture of doped fibers for amplification and high-transparency transport fibers that adhere to strict attenuation and mode-field diameter specifications. All deliverables must consist of certified spools of optical fiber accompanied by detailed test reports. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335921, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026, to support prime contractors operating under the U.S. Department of Defense.

Fiber Optic Cable Manufacturing

POSTED

about 8 hours ago

DEADLINE

Cybersecurity Compliance and RMF AccreditationThe Cybersecurity Compliance and RMF Accreditation subcontract supports prime contractors on U.S. Air Force software projects by providing comprehensive cybersecurity hardening. The scope of work includes developing System Security Plans, performing penetration testing and vulnerability scans using tools such as Nessus or ACAS, and managing the Risk Management Framework process to deliver a final Authority to Operate package. This opportunity is a total small business set-aside under NAICS code 541519. Qualified personnel must hold CISSP or CISM certifications to perform the required services. Interested parties must submit their responses by November 25, 2026.

Other Computer Related Services

POSTED

about 8 hours ago

DEADLINE

Synthetic Environment Generation for AI TrainingThis subcontract for the U.S. Air Force focuses on Synthetic Environment Generation for AI Training, specifically providing high-fidelity synthetic imagery to prime contractors. The scope of work involves creating detailed 3D models of refueling aircraft and simulating various lighting and weather conditions to generate labeled ground-truth datasets. To execute these tasks, the contractor must utilize high-end 3D rendering engines such as Unity or Unreal Engine 5 and ensure strict compliance with DFARS 252.204-7012 security standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026. The final deliverables for this engagement consist of comprehensive labeled synthetic image and video datasets designed to enhance AI training capabilities.

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Automated Pilot Debrief Software Interface DevelopmentThe Automated Pilot Debrief Software Interface Development is a small business set-aside subcontract for the U.S. Air Force under the Department of Defense. The project focuses on providing specialized software engineering to support prime contractors in enhancing pilot training. Key deliverables include the design of UI/UX for debriefing systems, the development of backend architecture to integrate AI outputs with flight data, and the creation of automated performance reporting tools, ultimately resulting in a functional software application for automated pilot debriefing. To ensure operational security and accessibility, the contractor must utilize secure government cloud hosting and adhere strictly to Section 508 and CMMC standards. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541511, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. The response deadline for this requirement is November 25, 2026.

Custom Computer Programming Services

POSTED

about 8 hours ago

DEADLINE

Computer Vision Algorithm Development for Aerial RefuelingThis subcontract for the U.S. Air Force focuses on the development and training of computer vision AI/ML models to support aerial refueling projects. The scope of work involves implementing object detection and tracking for aircraft and refueling booms, as well as utilizing spatial analysis to ensure precise alignment measurements. To execute these tasks, the contractor must utilize high-compute GPU clusters and advanced AI frameworks to train models based on aerial footage. The project is designated as a Total Small Business Set-Aside under NAICS code 541715, specifically targeting firms with fewer than 500 employees. Key deliverables include the final trained AI models, all associated source code, and comprehensive validation reports. Due to the nature of the defense work, strict adherence to DFARS 252.204-7012 and CMMC cybersecurity standards is mandatory. Responses are due by November 25, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 8 hours ago

DEADLINE

Laser Testing and Metrology ServicesThe Laser Testing and Metrology Services subcontract is a U.S. Air Force initiative focused on providing independent verification and validation for prime contractors working on laser system projects. The scope of work involves conducting critical technical assessments, including beam profiling, power measurement, and stability testing. These activities are performed within high-power laser safety facilities utilizing specialized equipment such as beam analyzers and interferometers to produce essential performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense in ensuring the operational integrity of advanced laser technologies.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Optomechanical Packaging FabricationThe Optomechanical Packaging Fabrication subcontract supports U.S. Air Force laser system projects by providing specialized manufacturing of structural chassis and housings for prime contractors. The scope of work involves ultra-precision CNC milling of ceramics and aerospace alloys, with a critical technical focus on vibration isolation and coefficient of thermal expansion matching to deliver precision-aligned physical assembly housings. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, specifically mandating eligibility for firms with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to meet the requirements set forth by the U.S. Department of Defense.

POSTED

about 8 hours ago

DEADLINE

Advanced Thermal Management DesignThe Advanced Thermal Management Design subcontract is a U.S. Air Force project focused on the development of thermal packaging for laser systems. The selected contractor will be responsible for performing thermal modeling and CFD analysis, as well as the fabrication of liquid cooling loops and cold plates utilizing high-thermal-conductivity materials. The primary deliverables include functional thermal management prototypes and validated thermal analysis reports to support prime contractors. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. The solicitation was posted on October 28, 2026, with a response deadline set for November 25, 2026.

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS