Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Specialty Manufacturing of MMHE Components

Active

Federal

Response Deadline08/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the specialized manufacturing of high-strength, precision components for Military Material Handling Equipment, including lifting mechanisms, transport frames, and safety interlocks, all fabricated using defense-grade materials to meet stringent performance and durability standards. The work is targeted at supporting critical defense systems requiring reliability under extreme operational conditions, with all deliverables expected to conform to exacting military specifications and quality control protocols. The subcontract opportunity was posted on July 27, 2026, with a response deadline of August 27, 2026, and is classified under NAICS code 332420 for Metal Forging and Stamping. Performance is to be conducted at Warner Robins, Georgia, 31098, under the oversight of the Department of Defense, specifically the FA8532 Aflcmc Wnkaa office. The work is restricted to subcontracting activity, with no set-aside designation specified, and all interested parties must submit proposals prior to the deadline to be considered for award.

General Info

Manufacture defense-grade precision components for military equipment by August 27, 2026, in Warner Robins, Georgia.

Agency

Department Of Defense → FA8532 Aflcmc WnkaaView Agency

NAICS

332420 - Metal Tank (Heavy Gauge) ManufacturingView NAICS

Place of Performance

Warner Robins, GA, 31098, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 07:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8532 Aflcmc Wnkaa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8532 Aflcmc Wnkaa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production of high-strength, precision components for MMHE such as lifting mechanisms, transport frames, and safety interlocks using defense-grade materials.

Similar Contracts

Same NAICS industry code

STEAM KETTLESThe Texas Department of Criminal Justice is soliciting bids for the procurement of steam kettles under solicitation number IW254756, with the request posted on July 28, 2026, and responses due by August 12, 2026. This procurement is intended to support operational needs within Texas correctional facilities, with all delivered items required to be性能 at locations under the jurisdiction of the Texas Department of Criminal Justice. The contract is managed by Donna Gardner, who serves as the primary point of contact and can be reached via phone at 936-437-3859 or email at donna.gardner@tdcj.texas.gov. Bidders must submit proposals through the Texas SmartBuy portal, and no set-aside provisions have been designated for this solicitation. The department is seeking reliable, commercially available steam kettles suitable for institutional food service applications, though specific technical specifications are not detailed in the public posting. All interested vendors are expected to comply with general state procurement standards and deliver products that meet functional and safety requirements for use in correctional environments.

Texas Department of Criminal Justice

POSTED

about 16 hours ago

DEADLINE

AGE Fuel TankThe 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes for a 6,000-gallon self-contained fuel dispensing system to serve as a centralized refueling point for AVGAS and Jet-A fuel at the new AGE facility, Building 200. The requirement is designated under NAICS code 332420 for Metal Tank (Heavy Gauge) Manufacturing and PSC 5430 for Storage Tanks, and is set aside exclusively for small businesses. Vendors must submit detailed quotes demonstrating compliance with all technical, logistical, and safety specifications outlined in the attached Salient Characteristics document, which includes exact dimensions, tank requirements, and safety standards. The solicitation has been amended twice to extend the submission deadline, with the final due date set for 7 August 2026 at 1:30 PM CDT. Proposals must be submitted via email to the designated point of contact, Amn Juan Lopez Ramirez and SrA Ryan Crisostomo, and must include pricing, delivery lead time, offloading and installation details, and any supporting technical literature. Incomplete or late submissions will not be considered. All additional documentation, including the Statement of Work and Salient Characteristics dated 28 July 2026, are attached to the solicitation, though no details on evaluation criteria, contract clauses, delivery schedules, payment terms, packaging, inspections, or representations are evident in the available information.

FA4819 325 Cons Pkp

POSTED

about 24 hours ago

DEADLINE

Bulk Oil/Coolant Storage & Dispenser SystemThe Government is seeking quotes for a modular fluid storage and dispensing system designed for delivery only at Minot AFB, North Dakota, under solicitation FA452826QSP03. The system must fit within a compact 12’W x 9’D x 10’H footprint and operate entirely on facility-supplied compressed air, housing four 120-gallon aluminized steel tanks—three black tanks for different types of oil and one blue tank for coolant. The design requires two pneumatic pumps: a single AODD pump for the coolant line and a gear/piston pump for the oil line, with an oil selector manifold equipped with three 2-way isolation ball valves to ensure no cross-contamination when switching between oil types. Two 50ft hose reels are mandatory—one for coolant and one shared reel for all three oils—along with a purge or return line equal in diameter to the hose to flush residual fluid when changing oil types. Both the oil and coolant lines require independent 10-micron inline filtration with isolation valves to maintain fluid purity. Safety and containment are critical components of the system, with requirements including color-change desiccant breathers, isolated sight gauges, drip pans, and a spill containment pallet rated for at least 130 gallons. All components must be compatible with the specified fluids and operating conditions, and quotes for “or equal” products are accepted provided they meet every technical criterion. This is a total small business set-aside under NAICS code 332420, with proposals due by July 30, 2026. The point of contact for questions is Sherry L. Platt, with Ted Arneson as the secondary contact, and the system must be delivered to the specified performance location at Minot AFB.

POSTED

about 24 hours ago

DEADLINE

ADAPTER,COMPRESSEDThis contract pertains to the procurement of an ADAPTER, COMPRESSED under solicitation SPRMM126QKG66, issued by the Defense Logistics Agency (DLA) Mechanicsburg under emergency acquisition flexibilities. The contract requires full compliance with military specifications, including MIL-STD-130 Rev N for marking, and mandates that all items be manufactured or supplied by authorized distributors with proof of authorization provided at submission. The contract is awarded using the Lowest Price Technically Acceptable (LPTA) method, emphasizing adherence to technical requirements over cost minimization. All deliverables must meet exact design parameters, with cage code 53711 and reference number 7102686-010 being the only approved configurations; any design, material, or part number changes require prior written approval and a $250 administrative fee unless categorized as a Code 1 change. Inspection is conducted at the manufacturer’s facility, with final packaging and acceptance also subject to specified locations, and the contractor assumes full responsibility for quality assurance, including maintaining records for 365 days after final delivery. Electronic submission of invoices and receiving reports through the Wide Area Workflow (WAWF) system is mandatory, and contractors must register for the Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA) portal to monitor contract status. Access to technical drawings requires coordination through the designated Data Custodian via SAM.gov, with strict controls on distribution as defined by seven standardized statements, including NOFORN and export-controlled designations. The contract prohibits unauthorized changes to production facilities and requires all documentation to comply with federal cybersecurity and supply chain security mandates, including the Federal Acquisition Supply Chain Security Act and mandatory Cybersecurity Maturity Model Certification level requirements. Contractors must also provide accurate contact information, including email and CAGE code, and notify NAVSUP WSS Mechanicsburg to receive automated updates via Navy Electronic Commerce Online. Failure to comply with any requirement, including packaging under MIL-STD-2073, documentation restrictions, or submission protocols, will result in non-acceptance and potential penalties.

SPRMM1 DLA Mechanicsburg

POSTED

about 24 hours ago

DEADLINE

Liquid Storage Tank Manufacturing & Supply

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Manufacture and Supply of DLA-Compliant Shipping and Storage ContainersThe contract entails the fabrication and delivery of four standardized metal shipping and storage containers designed to meet Department of Defense Logistics Agency packaging requirements and National Stock Number specifications. All units must adhere strictly to established DLA standards for durability, dimensional accuracy, labeling, and environmental resilience to ensure compatibility with military logistics infrastructure. The scope involves complete manufacturing from raw materials through final inspection and qualified packaging for transport, with compliance verified by accepted government testing protocols. The solicitation is classified as a subcontract under NAICS code 332420, indicating the primary work falls within metal container manufacturing. The opportunity was posted on July 27, 2026, with a response deadline of August 3, 2026, indicating a limited window for qualified vendors to submit proposals. The contract is managed under the Construction & Equipment MRO SVC I organization within the Department of Defense, and all deliverables must be performed to support military supply chain operations, though the specific place of performance is not detailed. Interested parties must access the official DIBBS portal via the provided link to obtain full technical and administrative instructions.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

TANK, PRESSUREThe contract specifies the procurement of a pressure tank with NSN 2530-01-332-1394 and part number A12-11924-002, under solicitation SPE7LX-26-U-9033, issued as a Service-Disabled Veteran-Owned Small Business Set Aside. A total of 38 units are required to be delivered within 75 days under FOB origin terms, with no tolerance for quantity variation. Delivery is to be made directly to the destination where inspection and acceptance occur. Packaging must comply with DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override general commercial standards like ASTM D3951. If the item is classified as hazardous per FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, but all packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to RP001 DLA Packaging Requirements for Procurement. The Unit of Issue is each, with a Quantity per Unit Pack of 1, and the contract is subject to the DLA eProcurement system's active revisions of technical and quality standards as of the solicitation issuance date. The point of contact for this procurement is Theodore Misiolek, with the response deadline set for August 11, 2026, and the solicitation posted on July 27, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

TANK, LIQUID STORAGEThe contract is for the procurement of two liquid storage tanks, identified by NSN 5430-01-074-8109 and part number 2683, under solicitation SPE8E9-26-T-3254, awarded as a total small business set-aside. The supplier, MAG Aerospace Industries, LLC, must deliver the items FOB origin within 20 days of contract award, with no variance permitted in quantity. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, marking, and palletization as defined by DLA’s packaging requirements. The items are designated as critical application and may involve covered defense information, requiring strict handling protocols. Delivery is directed to Air France Industries at Roissy CDG, France, with DFR002 as the freight forwarder responsible for international transport. The contract enforces compliance with technical and quality standards referenced from the DLA Master List, and all marking must follow the specified codes without special identification. The original required delivery date is January 27, 2026, and the point of contact for inquiries is Matthew Kruc of the Department of Defense.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Marine-Grade Fasteners and Metal ComponentsThe contract involves the supply of 316 stainless steel pins and hot-dip galvanized steel straps designed to meet stringent corrosion resistance standards, specifically for integration into marine rigging blocks aboard the Balclutha vessel. These components are critical for ensuring durability and performance in harsh saltwater environments, requiring materials and manufacturing processes that comply with industry benchmarks for long-term marine use. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 332420, which classifies it within the forged and stamped metal product manufacturing sector. Responses are due by August 10, 2026, with the solicitation posted on July 27, 2026, and the contracting activity originates from the Department of the Interior under Pwr GOGA(86000). Though specific delivery timelines, quantities, or inspection protocols are not detailed here, the emphasis on marine-grade materials implies adherence to strict quality control and certification requirements. The place of performance and point of contact information are unspecified, but the nature of the work suggests fulfillment must align with the operational needs of the Balclutha vessel, likely requiring coordination with marine restoration or preservation efforts.

Pwr GOGA(86000)

POSTED

DEADLINE

ABOVE GROUND FUEL TANKSThe U.S. Army is soliciting bids for above ground fuel tanks under a total small business set-aside contract with solicitation number W911S226U3828, issued by the Office of Micc-Ft Drum within the Department of Defense. The opportunity, posted on July 27, 2026, requires responses by August 4, 2026, and is classified as a combined solicitation under NAICS code 332420, which pertains to metal tank and pipe manufacturing. The contract is exclusively reserved for small businesses as defined by the Small Business Administration, ensuring participation from qualified small entities. Performance will be located at a site with a ZIP code of 31314, though the exact city and state are not specified in the data. Primary point of contact for inquiries is Natasha Thomas, reachable via email at natasha.k.thomas.civ@army.mil or by phone at 571-801-1335. The contract is being managed from the Ft Drum, New York office with a zip code of 13602-5220. Interested parties must submit proposals through the official SAM.gov workspace portal linked in the solicitation. No additional details regarding quantity, technical specifications, delivery schedules, or funding amounts are provided in the available data, but all submissions must comply with federal acquisition regulations and small business eligibility requirements.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Manufacture of Rigid Connecting LinksThe contract involves the manufacturing of rigid connecting links in strict accordance with military specifications, encompassing all stages from material procurement and precision machining to heat treatment, quality inspection, and final packaging. The work must adhere to defense-grade standards ensuring durability, performance, and reliability under operational conditions, with all processes subject to rigorous compliance and documentation. This is a small business set-aside under SBA guidelines, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 332420 for forging and stamping. The solicitation is issued by the Department of Defense through LSO Combat Vehicles and Armament with a response deadline of August 10, 2026, and is classified as a subcontract opportunity. The procurement is being conducted through the DIBBS system, with no specific place of performance or point of contact provided in the posting. Contractors must be prepared to meet the full scope of production requirements, including any additional military or quality control directives not explicitly listed, and align their capabilities with the expectations of a defense supply chain operating under federal acquisition regulations.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Tie-Down Cargo Chain SupplyThe contract requires the supply of 718 units of tie-down cargo chains that meet the MIL-DTL-6458H military specification, ensuring standardized quality and performance for defense applications. Delivery is FOB origin, meaning the supplier is responsible for preparing and inspecting the goods at their facility before transfer of ownership and risk to the buyer. Inspection must occur at the point of origin, with the supplier expected to meet all technical and compliance requirements prior to shipment. The NAICS code 332420 indicates the work falls under fabricated metal product manufacturing, aligning with the production of heavy-duty chains for military use. The solicitation is open as a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a response deadline of August 3, 2026, and a posted date of July 26, 2026. The place of performance is listed as Robins AFB, Georgia, 31098, which is the designated end location for delivery and operational use. While no specific point of contact or set-aside details are provided, bidders must ensure full compliance with the military specification and be prepared to demonstrate adherence to inspection protocols at their facility before shipment. The procurement is accessible via the DIBBS platform for further details and submission.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8532 Aflcmc Wnkaa

Same awarding agency

Subcontracting Outreach & Small Business Participation SupportThe contract seeks consulting services to assist prime contractors in fulfilling Small Business Participation requirements under Department of Defense procurement obligations. The focus is on providing expert support in developing realistic participation goals, designing effective outreach strategies to connect with small businesses, and preparing comprehensive subcontracting plans that comply with federal regulations. The services are intended to ensure prime contractors can meet mandatory subcontracting targets while maintaining compliance and maximizing opportunities for small business engagement across the defense supply chain. Performance of these services will be centered in Warner Robins, Georgia, with a specific emphasis on supporting contracts managed under the FA8532 Aflcmc Wnkaa office. The solicitation is open to qualified consultants with demonstrated experience in federal subcontracting compliance and small business development. Respondents must submit proposals by August 27, 2026, and the work will be conducted under a NAICS code classified as Management Consulting Services. This opportunity is designed to enhance accountability and transparency in federal contracting by ensuring small businesses have equitable access to DoD subcontracting opportunities.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Quality Assurance & Inspection Services (ISO 9001:2015)The contract encompasses third-party quality assurance and inspection services aligned with DFARS 52.246-11 and ISO 9001:2015 requirements, specifically focused on the preparation of Material Inspection and Receiving Reports to ensure compliance with defense procurement standards. The services are intended to verify the conformance of materials and components to specified technical requirements prior to acceptance, maintaining rigorous quality control throughout the receipt and inspection process. The work will be performed at Warner Robins, Georgia, with a response deadline of August 27, 2026, and is classified as a subcontract under NAICS code 541330, indicating it falls within the engineering services category. The contracting activity is under the Department of Defense through the FA8532 Aflcmc Wnkaa office, emphasizing the critical nature of the quality assurance function for DoD materiel acceptance.

Engineering Services

POSTED

DEADLINE

Military-Grade Equipment Marking & IUID LabelingThis contract requires the application of unique item identification (UII) using Data Matrix symbology in strict compliance with MIL-STD-130, ensuring each piece of military-grade equipment is permanently and legibly marked with a machine-readable code. The encoding must adhere to ISO/IEC 15434 standards for structure and data format, and all labels must undergo formal verification to confirm readability, contrast, and dimensional accuracy, guaranteeing long-term traceability and inventory integrity across the Department of Defense supply chain. The marking must be durable enough to withstand harsh environmental conditions and repeated handling typical in military operations. The solicitation is issued as a subcontract under the NAICS code 811212, with a response deadline of August 27, 2026, and performance expected to occur in Warner Robins, Georgia, 31098. The contracting officer is part of the FA8532 Aflcmc Wnkaa office within the Department of Defense, which oversees the logistics and sustainment of technical equipment. All subcontractors must ensure complete compliance with the UII requirements, without exception, as failure to meet these standards may result in rejection of deliverables and termination of contractual obligations. The contract emphasizes precision, durability, and verification, with no tolerance for non-compliant marking techniques or ambiguous data encoding.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Cybersecurity Compliance & CMMC ImplementationThe contract titled Cybersecurity Compliance & CMMC Implementation is a subcontract under the Department of Defense, specifically tied to the FA8532 Aflcmc Wnkaa office, aimed at supporting the achievement and sustained maintenance of CMMC Level 2 compliance. The scope encompasses a full suite of cybersecurity services including system assessment, development and organization of required documentation, registration in the Supplier Performance Risk System, and implementation of continuous monitoring protocols to ensure ongoing adherence to CMMC standards. The work must be performed at Warner Robins, Georgia, with a zip code of 31098, and is classified under NAICS code 541512 for Computer Systems Design Services. The solicitation was posted on July 27, 2026, with a firm response deadline of August 27, 2026, at 7:00 PM Eastern Time. While no set-aside type or point of contact information is provided, the contract is structured to assist prime contractors or other subcontractors in meeting stringent federal cybersecurity requirements for handling Controlled Unclassified Information. Compliance activities must align with the CMMC framework’s Level 2 controls, combining technical safeguards, policy development, and operational monitoring to demonstrate readiness for DoD contract obligations. Participation requires proven experience in cybersecurity compliance, systems assessment, and federal contract support, with a focus on sustainable, audit-ready documentation and processes.

Computer Systems Design Services

POSTED

DEADLINE

Digital Engineering & MBSE IntegrationThis contract focuses on the implementation of Model-Based Systems Engineering tools to enhance the rapid fielding, digital twin development, and lifecycle management of MMHE systems. The work will center on integrating advanced digital engineering practices to streamline system design, testing, and deployment across the defense lifecycle, ensuring improved efficiency and data-driven decision-making. The effort is tied to sustaining and advancing the operational capabilities of critical military hardware through modernized engineering workflows. The contract is categorized as a subcontract under NAICS code 541330, with performance to be carried out in Warner Robins, Georgia, 31098. It was posted on July 27, 2026, with a response deadline of August 27, 2026, at 7:00 PM. The sponsoring agency is the Department of Defense, specifically under the FA8532 Aflcmc Wnkaa office, indicating this effort supports a broader Defense Systems engineering initiative. All proposals must align with the objectives of accelerating capability delivery through digital engineering and MBSE methodologies.

Engineering Services

POSTED

DEADLINE

MMHE Design & Prototyping (Mechanical Engineering)The contract pertains to the design and fabrication of prototype systems for Munitions Materiel Handling Equipment, specifically engineered for the transport, loading, and unloading of armaments under extreme operational conditions. It requires advanced structural and mechanical engineering capabilities to ensure durability, safety, and reliability in high-stress military environments, with a focus on precision, robustness, and compliance with defense performance standards. The work involves end-to-end development from conceptual design through prototype build and testing, demanding specialized expertise in heavy-duty mechanical systems and materials suited for munitions handling. The solicitation is a subcontract opportunity under NAICS code 332993, with a response deadline of August 27, 2026, at 7:00 PM. Performance of the work is designated to occur in Warner Robins, Georgia, 31098, under the oversight of the Department of Defense, specifically the FA8532 Aflcmc Wnkaa agency. No set-aside status is specified, and the opportunity is open to qualified subcontractors capable of delivering technically complex, mission-critical prototypes aligned with defense logistics requirements. All proposals must be submitted prior to the deadline to be considered for award.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

New Generation Ammunition & Munitions Equipment (NGAME) for MMHE RFP/SolicitationThe Government is soliciting qualified U.S.-based industrial sources through the New Generation Ammunition & Munitions Equipment (NGAME) RFP to establish a robust vendor base capable of designing, developing, testing, manufacturing, and sustaining Munitions Handling Equipment (MMHE) that meets stringent nuclear certification standards per AFI 63-125. The contract is structured as a multiple-award indefinite-delivery/indefinite-quantity (IDIQ) with a maximum value of $920 million over a 10-year period, comprising a three-year base and seven one-year options. Foreign participation is prohibited, and all end items must be manufactured in the United States in compliance with the Buy America Act. Only entities with a valid U.S. Commercial and Government Entity (CAGE) code are eligible for direct award, and all submissions must be made through approved U.S.-only channels. The solicitation requires detailed technical, small business participation, and price proposals submitted in four distinct volumes with strict page and format limitations, and all offerors must demonstrate compliance with CMMC Level 2 cybersecurity standards, ISO 9001:2015 quality systems, and military marking standards including MIL-STD-130 for unique item identification using Data Matrix symbology and MIL-STD-129 for packaging and shipment labeling. The Technical Proposal is assessed on a pass/fail basis using a self-scoring matrix requiring a minimum of two points, and Small Business Participation is evaluated on three mandatory elements related to outreach and subcontracting opportunities; both must be deemed acceptable for award consideration. Price is not rated but must be reasonable and compliant, with award determined under the Lowest Price Technically Acceptable (LPTA) methodology. All delivery orders will define specific quantities, delivery locations, and FOB terms, with performance occurring primarily at Warner Robins Air Force Base in Georgia. Payments must be processed through Wide Area WorkFlow (WAWF), and each awardee is required to attend a mandatory virtual post-award conference costing no more than $100. All submitted data must include Unique Entity IDs and CAGE codes in accordance with DFARS requirements, and compliance with U.S. sanctions related to Venezuela, China, and Xinjiang is mandatory.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE