Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture and Supply of DLA-Compliant Shipping and Storage Containers

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the fabrication and delivery of four standardized metal shipping and storage containers designed to meet Department of Defense Logistics Agency packaging requirements and National Stock Number specifications. All units must adhere strictly to established DLA standards for durability, dimensional accuracy, labeling, and environmental resilience to ensure compatibility with military logistics infrastructure. The scope involves complete manufacturing from raw materials through final inspection and qualified packaging for transport, with compliance verified by accepted government testing protocols. The solicitation is classified as a subcontract under NAICS code 332420, indicating the primary work falls within metal container manufacturing. The opportunity was posted on July 27, 2026, with a response deadline of August 3, 2026, indicating a limited window for qualified vendors to submit proposals. The contract is managed under the Construction & Equipment MRO SVC I organization within the Department of Defense, and all deliverables must be performed to support military supply chain operations, though the specific place of performance is not detailed. Interested parties must access the official DIBBS portal via the provided link to obtain full technical and administrative instructions.

General Info

Fabricate and deliver four DLA-compliant metal containers meeting military logistics standards by August 3, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

332420 - Metal Tank (Heavy Gauge) ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication and delivery of 4 units of standardized metal shipping and storage containers compliant with DLA packaging and NSN specifications.

Similar Contracts

Same NAICS industry code

STEAM KETTLESThe Texas Department of Criminal Justice is soliciting bids for the procurement of steam kettles under solicitation number IW254756, with the request posted on July 28, 2026, and responses due by August 12, 2026. This procurement is intended to support operational needs within Texas correctional facilities, with all delivered items required to be性能 at locations under the jurisdiction of the Texas Department of Criminal Justice. The contract is managed by Donna Gardner, who serves as the primary point of contact and can be reached via phone at 936-437-3859 or email at donna.gardner@tdcj.texas.gov. Bidders must submit proposals through the Texas SmartBuy portal, and no set-aside provisions have been designated for this solicitation. The department is seeking reliable, commercially available steam kettles suitable for institutional food service applications, though specific technical specifications are not detailed in the public posting. All interested vendors are expected to comply with general state procurement standards and deliver products that meet functional and safety requirements for use in correctional environments.

Texas Department of Criminal Justice

POSTED

about 16 hours ago

DEADLINE

AGE Fuel TankThe 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes for a 6,000-gallon self-contained fuel dispensing system to serve as a centralized refueling point for AVGAS and Jet-A fuel at the new AGE facility, Building 200. The requirement is designated under NAICS code 332420 for Metal Tank (Heavy Gauge) Manufacturing and PSC 5430 for Storage Tanks, and is set aside exclusively for small businesses. Vendors must submit detailed quotes demonstrating compliance with all technical, logistical, and safety specifications outlined in the attached Salient Characteristics document, which includes exact dimensions, tank requirements, and safety standards. The solicitation has been amended twice to extend the submission deadline, with the final due date set for 7 August 2026 at 1:30 PM CDT. Proposals must be submitted via email to the designated point of contact, Amn Juan Lopez Ramirez and SrA Ryan Crisostomo, and must include pricing, delivery lead time, offloading and installation details, and any supporting technical literature. Incomplete or late submissions will not be considered. All additional documentation, including the Statement of Work and Salient Characteristics dated 28 July 2026, are attached to the solicitation, though no details on evaluation criteria, contract clauses, delivery schedules, payment terms, packaging, inspections, or representations are evident in the available information.

FA4819 325 Cons Pkp

POSTED

about 24 hours ago

DEADLINE

Bulk Oil/Coolant Storage & Dispenser SystemThe Government is seeking quotes for a modular fluid storage and dispensing system designed for delivery only at Minot AFB, North Dakota, under solicitation FA452826QSP03. The system must fit within a compact 12’W x 9’D x 10’H footprint and operate entirely on facility-supplied compressed air, housing four 120-gallon aluminized steel tanks—three black tanks for different types of oil and one blue tank for coolant. The design requires two pneumatic pumps: a single AODD pump for the coolant line and a gear/piston pump for the oil line, with an oil selector manifold equipped with three 2-way isolation ball valves to ensure no cross-contamination when switching between oil types. Two 50ft hose reels are mandatory—one for coolant and one shared reel for all three oils—along with a purge or return line equal in diameter to the hose to flush residual fluid when changing oil types. Both the oil and coolant lines require independent 10-micron inline filtration with isolation valves to maintain fluid purity. Safety and containment are critical components of the system, with requirements including color-change desiccant breathers, isolated sight gauges, drip pans, and a spill containment pallet rated for at least 130 gallons. All components must be compatible with the specified fluids and operating conditions, and quotes for “or equal” products are accepted provided they meet every technical criterion. This is a total small business set-aside under NAICS code 332420, with proposals due by July 30, 2026. The point of contact for questions is Sherry L. Platt, with Ted Arneson as the secondary contact, and the system must be delivered to the specified performance location at Minot AFB.

POSTED

about 24 hours ago

DEADLINE

ADAPTER,COMPRESSEDThis contract pertains to the procurement of an ADAPTER, COMPRESSED under solicitation SPRMM126QKG66, issued by the Defense Logistics Agency (DLA) Mechanicsburg under emergency acquisition flexibilities. The contract requires full compliance with military specifications, including MIL-STD-130 Rev N for marking, and mandates that all items be manufactured or supplied by authorized distributors with proof of authorization provided at submission. The contract is awarded using the Lowest Price Technically Acceptable (LPTA) method, emphasizing adherence to technical requirements over cost minimization. All deliverables must meet exact design parameters, with cage code 53711 and reference number 7102686-010 being the only approved configurations; any design, material, or part number changes require prior written approval and a $250 administrative fee unless categorized as a Code 1 change. Inspection is conducted at the manufacturer’s facility, with final packaging and acceptance also subject to specified locations, and the contractor assumes full responsibility for quality assurance, including maintaining records for 365 days after final delivery. Electronic submission of invoices and receiving reports through the Wide Area Workflow (WAWF) system is mandatory, and contractors must register for the Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA) portal to monitor contract status. Access to technical drawings requires coordination through the designated Data Custodian via SAM.gov, with strict controls on distribution as defined by seven standardized statements, including NOFORN and export-controlled designations. The contract prohibits unauthorized changes to production facilities and requires all documentation to comply with federal cybersecurity and supply chain security mandates, including the Federal Acquisition Supply Chain Security Act and mandatory Cybersecurity Maturity Model Certification level requirements. Contractors must also provide accurate contact information, including email and CAGE code, and notify NAVSUP WSS Mechanicsburg to receive automated updates via Navy Electronic Commerce Online. Failure to comply with any requirement, including packaging under MIL-STD-2073, documentation restrictions, or submission protocols, will result in non-acceptance and potential penalties.

SPRMM1 DLA Mechanicsburg

POSTED

about 24 hours ago

DEADLINE

Liquid Storage Tank Manufacturing & Supply

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

TANK, PRESSUREThe contract specifies the procurement of a pressure tank with NSN 2530-01-332-1394 and part number A12-11924-002, under solicitation SPE7LX-26-U-9033, issued as a Service-Disabled Veteran-Owned Small Business Set Aside. A total of 38 units are required to be delivered within 75 days under FOB origin terms, with no tolerance for quantity variation. Delivery is to be made directly to the destination where inspection and acceptance occur. Packaging must comply with DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override general commercial standards like ASTM D3951. If the item is classified as hazardous per FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, but all packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to RP001 DLA Packaging Requirements for Procurement. The Unit of Issue is each, with a Quantity per Unit Pack of 1, and the contract is subject to the DLA eProcurement system's active revisions of technical and quality standards as of the solicitation issuance date. The point of contact for this procurement is Theodore Misiolek, with the response deadline set for August 11, 2026, and the solicitation posted on July 27, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

TANK, LIQUID STORAGEThe contract is for the procurement of two liquid storage tanks, identified by NSN 5430-01-074-8109 and part number 2683, under solicitation SPE8E9-26-T-3254, awarded as a total small business set-aside. The supplier, MAG Aerospace Industries, LLC, must deliver the items FOB origin within 20 days of contract award, with no variance permitted in quantity. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, marking, and palletization as defined by DLA’s packaging requirements. The items are designated as critical application and may involve covered defense information, requiring strict handling protocols. Delivery is directed to Air France Industries at Roissy CDG, France, with DFR002 as the freight forwarder responsible for international transport. The contract enforces compliance with technical and quality standards referenced from the DLA Master List, and all marking must follow the specified codes without special identification. The original required delivery date is January 27, 2026, and the point of contact for inquiries is Matthew Kruc of the Department of Defense.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Marine-Grade Fasteners and Metal ComponentsThe contract involves the supply of 316 stainless steel pins and hot-dip galvanized steel straps designed to meet stringent corrosion resistance standards, specifically for integration into marine rigging blocks aboard the Balclutha vessel. These components are critical for ensuring durability and performance in harsh saltwater environments, requiring materials and manufacturing processes that comply with industry benchmarks for long-term marine use. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 332420, which classifies it within the forged and stamped metal product manufacturing sector. Responses are due by August 10, 2026, with the solicitation posted on July 27, 2026, and the contracting activity originates from the Department of the Interior under Pwr GOGA(86000). Though specific delivery timelines, quantities, or inspection protocols are not detailed here, the emphasis on marine-grade materials implies adherence to strict quality control and certification requirements. The place of performance and point of contact information are unspecified, but the nature of the work suggests fulfillment must align with the operational needs of the Balclutha vessel, likely requiring coordination with marine restoration or preservation efforts.

Pwr GOGA(86000)

POSTED

DEADLINE

Specialty Manufacturing of MMHE ComponentsThe contract involves the specialized manufacturing of high-strength, precision components for Military Material Handling Equipment, including lifting mechanisms, transport frames, and safety interlocks, all fabricated using defense-grade materials to meet stringent performance and durability standards. The work is targeted at supporting critical defense systems requiring reliability under extreme operational conditions, with all deliverables expected to conform to exacting military specifications and quality control protocols. The subcontract opportunity was posted on July 27, 2026, with a response deadline of August 27, 2026, and is classified under NAICS code 332420 for Metal Forging and Stamping. Performance is to be conducted at Warner Robins, Georgia, 31098, under the oversight of the Department of Defense, specifically the FA8532 Aflcmc Wnkaa office. The work is restricted to subcontracting activity, with no set-aside designation specified, and all interested parties must submit proposals prior to the deadline to be considered for award.

FA8532 Aflcmc Wnkaa

POSTED

DEADLINE

ABOVE GROUND FUEL TANKSThe U.S. Army is soliciting bids for above ground fuel tanks under a total small business set-aside contract with solicitation number W911S226U3828, issued by the Office of Micc-Ft Drum within the Department of Defense. The opportunity, posted on July 27, 2026, requires responses by August 4, 2026, and is classified as a combined solicitation under NAICS code 332420, which pertains to metal tank and pipe manufacturing. The contract is exclusively reserved for small businesses as defined by the Small Business Administration, ensuring participation from qualified small entities. Performance will be located at a site with a ZIP code of 31314, though the exact city and state are not specified in the data. Primary point of contact for inquiries is Natasha Thomas, reachable via email at natasha.k.thomas.civ@army.mil or by phone at 571-801-1335. The contract is being managed from the Ft Drum, New York office with a zip code of 13602-5220. Interested parties must submit proposals through the official SAM.gov workspace portal linked in the solicitation. No additional details regarding quantity, technical specifications, delivery schedules, or funding amounts are provided in the available data, but all submissions must comply with federal acquisition regulations and small business eligibility requirements.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Manufacture of Rigid Connecting LinksThe contract involves the manufacturing of rigid connecting links in strict accordance with military specifications, encompassing all stages from material procurement and precision machining to heat treatment, quality inspection, and final packaging. The work must adhere to defense-grade standards ensuring durability, performance, and reliability under operational conditions, with all processes subject to rigorous compliance and documentation. This is a small business set-aside under SBA guidelines, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 332420 for forging and stamping. The solicitation is issued by the Department of Defense through LSO Combat Vehicles and Armament with a response deadline of August 10, 2026, and is classified as a subcontract opportunity. The procurement is being conducted through the DIBBS system, with no specific place of performance or point of contact provided in the posting. Contractors must be prepared to meet the full scope of production requirements, including any additional military or quality control directives not explicitly listed, and align their capabilities with the expectations of a defense supply chain operating under federal acquisition regulations.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Tie-Down Cargo Chain SupplyThe contract requires the supply of 718 units of tie-down cargo chains that meet the MIL-DTL-6458H military specification, ensuring standardized quality and performance for defense applications. Delivery is FOB origin, meaning the supplier is responsible for preparing and inspecting the goods at their facility before transfer of ownership and risk to the buyer. Inspection must occur at the point of origin, with the supplier expected to meet all technical and compliance requirements prior to shipment. The NAICS code 332420 indicates the work falls under fabricated metal product manufacturing, aligning with the production of heavy-duty chains for military use. The solicitation is open as a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a response deadline of August 3, 2026, and a posted date of July 26, 2026. The place of performance is listed as Robins AFB, Georgia, 31098, which is the designated end location for delivery and operational use. While no specific point of contact or set-aside details are provided, bidders must ensure full compliance with the military specification and be prepared to demonstrate adherence to inspection protocols at their facility before shipment. The procurement is accessible via the DIBBS platform for further details and submission.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

HEATING ELEMENT, ELEThe contract is for the procurement of four heating elements, part number THE08604 with NSN 4520015562643, under solicitation SPE8E9-26-T-3258, with a required delivery date of July 28, 2026, and a five-day delivery window FOB destination. The units must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, with all packaging and labeling governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The items are to be palletized according to DLA Packaging Requirements for Procurement, and the unit of issue is each, with no variance allowed in quantity. Delivery is directed to two locations: the primary destination is APO AE 09309-9998 for Operation Enduring Freedom, with a secondary freight address at Al Udeid Air Base in Qatar. Transportation rules follow DLAD Proc Note C19 for main shipment and C20 for first destination, and the item is designated for government use only, with a DIC code of A01 and an advanced notice indicator of 2D. The contract is awarded under a federal procurement category, with the NAICS code 332323, and all technical specifications referenced in the DLA Master List must be fully adhered to.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE

BAR, METALThis contract specifies the procurement of hot-rolled metal bars meeting ASTM A36/A36M-19 and ASTM A6/A6M-24B standards, with exact length requirements in whole feet from 10 to 24 feet, excluding fractional measurements. Each bar must be permanently marked with the DLA contract number, National Stock Number, contractor’s CAGE code, specification revision, grade, alloy, heat and lot number, dimensions, and manufacturer information using stencil or stamping methods that are legible, waterproof, and non-contaminating; adhesive labels are required for smaller diameter bars under 0.250 inches, while tags are acceptable for wire. A Certificate of Quality Compliance, or mill certification, must accompany every shipment and be forwarded to the designated DLA Troop Support Contracting Officer. The product must conform to DLA packaging standards MIL-STD-2073-1E and RP001, with special marking codes Z and ZZ applied per ASTM A700, and all shipments must comply with MIL-STD-129 for labeling and palletization. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement constitutes an exception that must be explicitly declared. Products not sourced from QSLD-approved distributors will be treated as unauthorized substitutions, with potential criminal penalties in addition to civil remedies. Ozone-depleting chemicals are strictly prohibited, and any substitutes require prior government approval. The item is subject to firm fixed pricing with zero tolerance for quantity variance, and all deliveries are due within 90 days after date of award, inspected and accepted at destination. The shipment must be delivered to the DLA Distribution Depot at Hill AFB, Utah, following DLA transportation directives, with no source inspection required for qualified suppliers under the QSL program, waiving standard quality conformance inspections. The contract references multiple technical documents under DLA’s master list and requires strict adherence to all specification revisions in effect on the solicitation issue date.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

BOTTLE, SCREW CAPThe contract is for the procurement of 106 thousand bottle and screw cap units identified by NSN 8125-00-543-7699 and part number F70508 from Scientific Specialties Service Inc, designated as a critical application item. The items must comply with DLA packaging standards and technical requirements referenced from the DLA Master List of Technical and Quality Requirements, including strict prohibitions against intentional use of mercury or mercury-containing compounds unless explicitly exempted for specified functional components such as batteries, sensors, or weapons systems. Packaging must adhere to MIL-STD-2073-1E with unit containers holding exactly 24 caps and bottles, marked in accordance with MIL-STD-129 and labeled as fragile. Palletization must meet DLA’s RP001 requirements and all deliveries are FOB origin with no quantity variance allowed. Inspection and acceptance occur at the destination, and shipment timelines vary by delivery location with required ship dates ranging from February 2027 to July 2026, all tied to an original delivery window ending in September 2026. Transportation is governed by DLA procedural notes C19 and C20, and units are to be delivered to three separate distribution depots in Jacksonville FL, Hill AFB UT, and Tracy CA under a single contract identified as SPE8E9-26-T-3263.

Plastics Bottle Manufacturing

POSTED

about 19 hours ago

DEADLINE

HEATING ELEMENT, ELEThe contract is for the procurement of four heating elements, part number THE08607 with NSN 4520015562107, under solicitation SPE8E9-26-T-3257, with a required delivery date of July 28, 2026, and a five-day delivery window FOB destination. The unit price is $4.00 per unit, totaling $16.00, with no variance permitted in quantity. All items must be packaged in accordance with ASTM D3951, but subject to higher precedence of the DLA Master List of Technical and Quality Requirements, and labeled per MIL-STD-129. Palletization must comply with RP001 DLA Packaging Requirements for Procurement. The delivery is directed to two locations: the primary destination is APO AE 09309-9998 for Operation Enduring Freedom, with a secondary freight shipping address at Al Udeid Air Base, Qatar. Transportation instructions reference DLAD Proc Notes C19 and C20, and the shipment type is RDD 777. The heating elements are classified under NAICS 332323 and are procured by the Department of Defense under the Construction & Equipment MRO Service I. The contract emphasizes strict compliance with government standards for identification, packaging, and delivery, and all technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List. The point of contact is Matthew Kruc, and the solicitation response deadline is August 10, 2026.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE

FAN, CIRCULATINGThis contract is for the procurement of one circulating fan identified by NSN 4140-01-641-4264 under solicitation SPE8E9-26-T-3268, with a required delivery within five days of award. The item must be delivered FOB origin and inspected at destination, with no tolerance for quantity variance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and markings, and must adhere to DLA packaging requirements. All supplies must be free of intentional mercury or mercury-containing compounds except for permitted uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must have shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The item must be shipped via traceable freight methods and not parcel post, directed to the receiving officer at Building 7000, Door 12, Silverdale, WA. Special markings are not required. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with the version in effect on the RFP issue date controlling. The sole unit of measure is each, and the purchase request is 7017334220. The original required delivery date is June 30, 2026, and the solicitation response deadline is August 10, 2026. For government use only, the project code is XK3 TP 1 and the supplier addendum is 6M353T.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

SHEET, METALThe contract specifies the procurement of 23 sheets of aluminum alloy metal, each 0.125 inches thick, 36 inches wide, and 144 inches long, weighing 64.80 pounds per sheet, with the NSN 9535-00-684-4551. The material must conform to SAE AMS4268 Revision B, SAE AMS-QQ-A-250/4B, and ASTM B666/B666M-20 standards, with a temper designation of T81. All shipments require a Certificate of Quality Compliance, including mill certification, with a copy provided to the DLA Troop Support Contracting Officer with every delivery. Each sheet must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and type, manufacturer’s name, heat and lot number, and exact dimensions using stamping or stenciling that is legible, waterproof, and noncontaminating; adhesive labels are permitted for small-diameter bars, tubes, and shapes. Sheets must be supplied in whole foot lengths only. Packaging must comply with ASTM B660-23 Level A and MIL-STD-2073-1E, including robust four-corner and full-edge protection, fiberboard or better top and bottom coverage, and adherence to PREP FOR DELIVERY code ZZ. Markings must also include both units of measure when applicable and conform to MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from the QSLD requirement constitutes an exception that must be clearly stated. Products not sourced through an approved QSLD distributor are considered unauthorized substitutions and may result in criminal penalties. Compliance with the QSL program waives the need for government inspection, including COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements. The contract mandates firm fixed pricing with no tolerance for quantity variance, delivery within 90 days after order date, and destination point inspection and acceptance. The material will be shipped to the DLA Distribution Depot in Tinker AFB, Oklahoma, with packaging and transport governed by DLA-specific procedures. The solicitation was issued under SPE8E9-26-Q-0627 with a response deadline

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 19 hours ago

DEADLINE

SHEET, METALThe contract specifies the procurement of aluminum metal sheets with precise technical and quality requirements, including material specifications of Alclad 7075-T6 with 0.0016 inch cladding on both sides, 0.040 inch thickness, 36 inch width, and 144 inch length, weighing approximately 20.95 pounds per sheet. All sheets must conform exactly to the stated dimensions with no tolerance for test coupons, and must be supplied in whole-foot lengths only. A Certificate of Quality Compliance, issued by the mill, is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and dimensions using stamping or stenciling methods that are legible, waterproof, non-contaminating, and durable. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches nominal OD, with tags acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust corner and edge protection, full fiberboard coverage top and bottom, and marking in accordance with MIL-STD-129, with dual-unit quantity labeling where applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared. Non-compliance with QSLD rules constitutes an unauthorized substitution and may trigger criminal penalties. This solicitation waives government inspection requirements for approved QSLD suppliers, relying instead on mill certifications and compliance with referenced standards including SAE AMS4049N, ASTM B666/B666M-20, and ASTM B660-23. Material must be delivered within 55 days of award, with firm fixed pricing and zero quantity variance permitted. Inspection and acceptance occur at destination, with FOB origin terms. Two separate line items total 70 sheets, destined for Tinker AFB, OK and San Diego, CA, with a required ship date of July 9, 2026. All documentation, including Certificates of Quality Compliance and marking details, must align strictly with the referenced Technical Data Package and DLA Master List of Technical and Quality Requirements.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 19 hours ago

DEADLINE

FAN, CIRCULATINGThe contract pertains to the procurement of one circulating fan identified by NSN 4140016414271 and purchase request 7017334219, with a delivery requirement of five days after award, FOB origin, and inspection and acceptance occurring at the destination location. The item must comply with DLA packaging standards as defined in MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and containment instructions, and is prohibited from using mercury or mercury-containing compounds except for specific exempted applications such as functional components in batteries, fluorescent lamps, sensors, or instrument controls approved by NAVSEA, which must include a secondary containment. All packaging and palletization must adhere to DLA's procurement packaging requirements, and shipments must be delivered via the fastest traceable means, explicitly excluding parcel post. The delivery address is the NAVIMFAC PACNORWEST facility in Silverdale, Washington, with designated receiving and contact information for government receipt, and the supply is for use under a Department of Defense program identified by project code XK3 TP 1 and special handling identifiers. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date, and all units align with the DoD authorized unit of issue as defined in official DLA documentation.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

COMPUTER SUBASSEMBLThis contract pertains to the procurement of three units of a computer subassembly identified by NSN 7050-01-538-5139 and part number 1756-OB32, supplied by ROCKWELL AUTOMATION, INC. The items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All supplies must be marked in accordance with MIL-STD-130N for identification and MIL-STD-129 for packaging marking, with no special marking required. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific preservation, wrapping, and containment methods, and palletization must follow DLA guidelines. The item must not contain intentionally added mercury or mercury compounds, except in specified exceptions such as functional batteries or instruments, which must include secondary containment. The delivery is FOB origin, with inspection and acceptance occurring at the destination, under a zero variance tolerance. The required delivery date is 160 days from contract award, with a target ship date of January 18, 2027, and delivery must be made to the distribution depot in Bremerton, Washington. Compliance with CMMC Level 2 self-assessment is mandatory, and the contract is subject to Covered Defense Information requirements. The contract is issued under solicitation SPE8E9-26-T-3264, with a response deadline of August 10, 2026, and the items are classified under NAICS code 334511 for industrial control equipment manufacturing.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

PLATE, METALThe contract specifies the procurement of 200 pieces of corrosion-resistant steel plate, identified as Type 316L, hot rolled and annealed, with exact dimensions of 0.1875 inches thick, 36 inches wide, and 96 inches long, weighing approximately 187.92 pounds per piece. The material must fully comply with ASTM A240/A240M-26 and other referenced standards including MIL-STD-129R, ASTM A700-14, and SAE AMS2807C, and must be supplied in whole-foot lengths only. Every unit must bear continuous identification markings that include the DLA contract delivery order number, NSN, specification revision, alloy type, manufacturer’s name, heat and lot number, and dimensions, using stamping or stenciling methods that ensure legibility, water resistance, and no contamination of the material. Adhesive labels are permitted for small-diameter bars, tubes, and shapes under 0.250 inches. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for each shipment and must be provided to both the receiving depot and the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement must be explicitly declared. Failure to comply results in rejection of the product and may trigger criminal penalties for unauthorized substitutions. Packaging must adhere to MIL-STD-2073-1E with preservation methods Z and ZZ as defined in ASTM A700, and marking must follow MIL-STD-129 with no special marking code applied. The delivery is FOB origin with a 71-day window ending on July 24, 2026, and no variance in quantity is permitted. Inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. The contract is a total small business set-aside with a NAICS code of 331221, and source inspection requirements are waived for qualified suppliers under the QSL program. All documentation and technical data referenced in the Technical Data Package must be accessed through the DLA eProcurement website as specified.

Rolled Steel Shape Manufacturing

POSTED

about 19 hours ago

DEADLINE

BAR, METALThe contract specifies the procurement of corrosion-resistant, solution heat-treated metal steel bars, 0.375 inches in diameter and 12 feet in length, with a weight of 0.380 pounds per foot, conforming to SAE AMS5643W Revision W and other referenced standards including ASTM A700-14 and MIL-STD-129R. The material must satisfy stringent technical and quality requirements as outlined in the Technical Data Package and DLA’s Master List of Technical and Quality Requirements, with mandatory metal certification documented via a Certificate of Quality Compliance that must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and deviations from this requirement are prohibited except with explicit written government authorization; noncompliance may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E with preservation method ZZ per ASTM A700, marking in accordance with MIL-STD-129, and palletization as defined by DLA packaging requirements. The material is classified as a critical application item with zero quantity variance allowed, firm fixed pricing, and FOB origin terms. Delivery is required within 90 days of award, with inspection and acceptance occurring at the destination, and shipments must be sent to specified DLA depots in Utah or Oklahoma. The solicitation number is SPE8E9-26-Q-0634 with a response deadline in August 2026 and a contractual need date of January 2027.

Rolled Steel Shape Manufacturing

POSTED

about 19 hours ago

DEADLINE

HEATING ELEMENT, ELEThe contract pertains to the procurement of four heating elements, identified by part number THE08606 and NSN 4520015562651, under solicitation SPE8E9-26-T-3262. Delivery is required within five days of award, with all units to be shipped FOB destination to the designated government address in APO AE 09309-9998, and an alternate freight shipping destination at Al Udeid Air Base in Qatar. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the delivery point. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The heating elements are to be delivered by July 28, 2026, with no specified need ship date. Unit price is $4.00 per unit, totaling $16.00 for the order. The contract is administered by the Department of Defense under NAICS code 332323, with primary point of contact Matthew Kruc. Transportation is subject to DLAD Procedure Notes C19 and C20, and all packaging and documentation must reflect the specified unit of issue and quantity per unit pack as defined in the contract.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE