Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Specialty Paint Supply – Inverted Mark Paint

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of five units of specialty inverted mark paint, identified by NSN 8010014188314 and associated part numbers A03900007 and 331775, manufactured to meet military specifications. This procurement is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 325510 for paint and coating manufacturing. The paint is intended for delivery to Port Hueneme, California, with no specific set-aside designation applied. The contract was posted on July 17, 2026, and is accessible via a public DIBBS link for award details and tracking. The location of performance and point of contact information are not provided in the available data.

General Info

Five units of specialty paint supplied to Port Hueneme, CA, under DLA subcontract, NSN 8010014188314.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325510 - Paint and Coating ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 5 units of PAINT, INVERTED MARK (NSN 8010014188314, Part Numbers A03900007 and 331775) to military specifications for delivery to Port Hueneme, CA.

Similar Contracts

Same NAICS industry code

POLYURETHANE COATINThis contract specifies the procurement of 2 gallons of polyurethane coating in gloss white, identified by NSN 8010-01-641-1903 and part number CA8100/B700/BMP33K, under solicitation SPE8ES-26-T-2457. The material is classified as a Type I (Code H) item with a strict 12-month non-extendable shelf life, requiring compliance with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129 for marking and palletization. Delivery is due within 20 days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. Hazardous material requirements mandate submission of Safety Data Sheets and compliant labels in accordance with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200), effective June 1, 2015, along with employee training on these updated protocols. Shipping must be conducted via traceable means only, prohibiting parcel post, to the designated receiving location at Naval Base Ventura County, Point Mugu, California. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date.

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

POLYURETHANE COATINGThis contract specifies the procurement of polyurethane coating in accordance with MIL-PRF-85285E, Type 2, Class H, designed for support equipment applications with a maximum VOC content of 340 grams per liter. The coating is a two-component system consisting of Component A, a pigmented polyester resin and solvent, and Component B, a clear aliphatic isocyanate, supplied as a set totaling two quarts per unit. The finished coating must be gloss gray, conforming to Fed-Std-595 Color Number 16473. The product carries a shelf life of twelve months, extendable under RS001 requirements, and must be labeled with the NSN 8010-01-380-3282 and a lot or batch number per MIL-STD-129. The order quantity is two kits, with delivery required 173 days after order placement. Suppliers must comply with all applicable technical and quality requirements referenced in the DLA Master List, including packaging, labeling, and removal of government identification from non-accepted supplies. Compliance with the updated OSHA Hazard Communication Standard is mandatory, requiring submission of Safety Data Sheets formatted per 29 C.F.R. 1910.1200 and compliant hazard communication labels prior to award. Employee training on these updated safety procedures is required. The product is subject to Covered Defense Information requirements, and all documentation must adhere to the solicitation SPE8ES-26-T-2414, issued on July 22, 2026, with a response deadline of July 28, 2026. The contract is managed by DLA Dist San Joaquin, with performance located in Tracy, California, and inquiries directed to Stephen Ockenhouse at dla-ts-fceb.inquiry@dla.mil.

DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

POLYURETHANE COATINThis contract specifies the procurement of a two-component polyurethane coating kit, formulated to meet MIL-PRF-85285F revision F dated December 10, 2024, with a gray color compliant with FED-STD-595, color number 36495. Each kit contains Part A and Part B to produce 0.946 liters (1 quart) of high-solids, Type 1 aircraft-grade coating with a maximum VOC content of 420 grams per liter. The item carries a Type II shelf life of 12 months, extendable, and all delivered product must have a minimum of 85% of its shelf life remaining upon receipt by the first government activity. Packaging must adhere to MIL-STD-129R, mandating labels that include the manufacturer’s date, inspection/test date, and lot or batch number, with special marking code 33 indicating its Type II shelf-life status. The coating must be packaged in a kit format, with options for assembly using E6 boxes with dunnage, heat-shrink or blister pack methods for smaller volumes, or bonded cans using adhesive disks or heat-shrink bonding to form a single, secure unit. Packaging, marking, and shipping must comply with MIL-STD-2073-1E, DLA Packaging Requirements, and IP025 for hazardous materials, using a D3 box if the material is hazardous. Delivery is required FOB destination within five days of contract award, with no tolerance for quantity variance. The item is identified by NSN 8010-01-520-7229 and is to be delivered to the Cargo Movement Element at Aviano Air Base, Italy. Inspection and acceptance occur at the destination, and transportation logistics are governed by DLAD Proc Note C19 and C20, with shipment reference RDD 777 and project code TP 1. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referencing R numbers such as RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, RQ017 for bare item marking, and RQ034 for hazardous communication compliance. The solicitation number is SPE8ES-26-T-2454, with a response deadline of August 3, 2026, and the required

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

POLYURETHANE COATIN

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

LACQUERThe contract pertains to the procurement of lacquer under solicitation SPE8ES-26-T-2420, with an NSN of 8010-00-664-7651 and a quantity of 39 gallons, to be delivered 45 days after award to DLA Dist San Joaquin in Tracy, California. The acquisition is conducted as fully competitive under a military specification and governed by DLA packaging requirements referenced in RP001, which mandates compliance with MIL-STD-2073-1E for packaging and preservation using hydrocarbon methods, along with MIL-STD-129R(3) for marking, including physical identification of bare items and barcoding for automated tracking. Special labeling requirements apply under the Hazard Communication Standard (29 CFR 1910.1200), requiring submission of Safety Data Sheets and approved hazard communication labels prior to award, consistent with OSHA’s Globally Harmonized System, and exempting materials regulated under FIFRA, FFDCA, CPSA, FHSA, or FAAS, which must be disclosed in a separate table. All hazardous material packaging must adhere to these labeling mandates, and suppliers must ensure employee training on the updated standards. The contract incorporates multiple Federal Acquisition Regulation clauses addressing ethical compliance, including combating human trafficking, employment eligibility verification, sustainable products, cyber incident reporting, safeguarding covered defense information, and prohibition of hexavalent chromium and covered defense telecommunications equipment. Payment is to be processed exclusively through Wide Area WorkFlow, with electronic submission of receiving reports and invoices required, and accountability for proper documentation lies with the contractor throughout the delivery chain. Inspection and acceptance occur at the destination, with the contractor responsible for ensuring full conformance to all technical, packaging, and labeling standards established by applicable military and federal specifications, including the DLA Master List of Technical and Quality Requirements, and any deviations from these standards are not permitted without prior approval. Offerors must self-certify their small business status and socioeconomic classifications, and any entity supplying covered defense telecommunications equipment must provide their UEI and CAGE code along with supporting documentation. The solicitation is issued under NAICS code 325510, indicates no set-aside, and is expected to result in a firm-fixed-price contract with no option periods or pricing details disclosed in the solicitation documents.

DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

COATING COMPOUND, NOThe contract solicitation SPE8ES-26-T-2409 seeks the procurement of a coating compound in accordance with Commercial Item Description A-A-59166B, dated March 16, 1998, with specific requirements for Type 1 coating, smooth texture, no grit, and color Light Gray as defined by FED-STD-595, Color Number 36440. Each unit is a 3.79 liter (1 gallon) can, and the total quantity requested is five gallons. The product must adhere to strict packaging standards including ASTM D 3951, MIL-STD-2073-1E, and DLA Packaging Requirements RP001, with no more than four one-gallon units per box limited to 65 pounds gross weight. Packaging must use the “U” code, include bail handles on one-gallon containers, and comply with DOT and IMDG Code standards for overseas shipments. All items must be marked per MIL-STD-129R(3), including lot or batch number, and labeled in compliance with the latest Hazard Communication Standard per 29 CFR 1910.1200, requiring submission of approved Safety Data Sheets and HCS-compliant labels prior to award. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof design and secondary containment as per NAVSEA 5100-003D. The product has a 12-month shelf life classified as TYPE 2 (CODE 4) and must be preserved using HIM method with no preservation material specified, subject to CLNG/DRY:1 cleaning and drying requirements. The contract requires delivery FOB destination to TRACY, CA 95304-5000, with a 173-day ADO delivery window starting from the as-directed order date. Performance and acceptance occur at the destination, with the Government responsible for inspection and acceptance under FAR 52.246-2 and DFARS 252.246-7003 requirements. Compliance with a suite of FAR and DFARS clauses is mandatory, including 52.222-36 and 52.222-50 for equal opportunity and

DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

Green Methyl Methacrylate (MMA) For Bike Lane And Other Hi-Visibility StripingThe City of Napa is seeking qualified vendors to supply green methyl methacrylate (MMA) pavement marking material for use in bike lane striping and other high-visibility applications. The material must be delivered in 40-unit kit increments, including MMA, catalyst, and aggregate, all new, unused, and in original manufacturer packaging with proper labeling and accompanying product and safety data sheets. Reflective beads are not included and will be procured separately by the City. The vendor must ensure the material meets or exceeds Caltrans standards for Methyl Methacrylate Traffic Striping Paint, with requirements for durability, skid resistance, and consistent color performance suitable for roadway and bike lane marking. All materials must be delivered within 14 calendar days to the Corporation Yard located at 770 Jackson Street, Napa, CA 94559. Bids are due by August 6, 2026, and the solicitation falls under NAICS code 325510 for paint and coating manufacturing.

POSTED

about 17 hours ago

DEADLINE

Adhesive Supply – Aerosol Formulation and PackagingThe contract requires the manufacture, filling, labeling, and packaging of eight boxes containing 24-ounce aerosol adhesive cans, each conforming to the National Stock Number 8040012150980 and meeting all applicable military standards for hazardous materials handling, shelf life, and secure packaging. The product must be produced and assembled in strict accordance with defense specifications to ensure safety, durability, and compatibility with military logistics systems. All phases of production, from formulation to final packaging, must comply with regulatory requirements governing hazardous substances and long-term storage conditions. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 325510 for chemical manufacturing and is open for response until August 3, 2026. The work must be performed in alignment with federal procurement guidelines, though specific performance location details are not provided. Potential bidders must review the full solicitation through the provided DIBBS link to ensure full compliance with technical, logistical, and documentation requirements prior to submission.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Industrial Coatings (Enamel) ManufacturingThe contract pertains to the manufacture of four cans of Type II enamel identified by NSN 8010-00-286-7749, requiring strict adherence to military quality standards as listed on the Qualified Products List and Approved Products List. The product must have a minimum 24-month shelf life and ensure at least 85 percent of that shelf life remains at the time of delivery, ensuring long-term usability and compliance with military inventory requirements. All production processes and materials must meet the technical specifications established for military-grade enamel coatings to guarantee durability, performance, and consistency under operational conditions. The solicitation is categorized as a subcontract under NAICS code 325510, which classifies specialty industrial coatings manufacturing, and is issued by the Defense Logistics Agency under the Department of Defense. It was posted on July 27, 2026, with a response deadline of August 4, 2026, indicating a short but defined window for qualified suppliers to submit proposals. The place of performance and point of contact details are not specified, suggesting the work may be performed at the manufacturer’s facility, with delivery directed to a DLA-designated location. The official solicitation page is accessible via a DIBBS link for further submission guidelines and technical requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Traffic Paint (Fast-Dry Yellow)The contract requires the manufacture and supply of 75 gallons of fast-dry yellow traffic paint meeting strict federal and defense standards, including compliance with MPI APL listing and FED-STD-595/33538 color specifications. The paint must be formulated for rapid drying and durable performance in high-traffic environments, ensuring visibility and safety for military and civilian infrastructure. The product is intended for use at a designated performance location in Norfolk, Virginia, with delivery expected to align with the response deadline of August 3, 2026. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 325510 for paint and coating manufacturing. The solicitation was posted on July 27, 2026, and suppliers must respond by the specified deadline to be considered. All materials must adhere to the required technical specifications to ensure compatibility with existing DOD traffic control systems and environmental conditions. Failure to meet any compliance criteria will result in disqualification.

Defense Logistics Agency

POSTED

DEADLINE

ENAMELThis procurement under solicitation SPE8ES-26-Q-0089 is for 4 containers of enamel, identified by NSN 8010-00-286-7749, with a firm fixed price and no variance allowed in quantity. The item is a Type II shelf-life product with a 24-month shelf life, requiring at least 85% remaining shelf life upon delivery to the first government activity; packaging and marking must comply with MIL-STD-129R, including clear indication of manufactured and inspection dates, and special marking code 33 for Type II shelf life. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-2073-1E, with hazardous material shipping governed by IP025 and compliance with OSHA’s revised Hazard Communication Standard, mandating submission of Safety Data Sheets and compliant labels prior to award, along with employee training on the updated standards. The product must be sourced from manufacturers approved on both the Qualified Products List (QPL) maintained by the Performance Review Institute and the Approved Products List (APL) maintained by the Master Painters Institute, with no deviations permitted from the MPI Approved Products List as of the contract award date. Technical data package requirements reference specific military and federal standards, including MIL-STD-147F, FED-STD-313F, and FED-STD-595/16187, and may involve Covered Defense Information subject to DFARS clauses 252.204-7012, 252.204-7019, and 252.204-7020. Non-compliance may result in cancellation of automated purchase orders. Delivery is required within 60 days after award to the designated destination, with FOB destination and inspection and acceptance also at destination, and transportation logistics referenced through DLAD procedural notices. This acquisition uses simplified procedures under 41 U.S.C. 1901 and Class Deviation 2026-O0028, and is administered by the Defense Logistics Agency through Miriam Smiley.

Defense Logistics Agency

POSTED

DEADLINE

COATING COMPOUND, NOThis contract is for the procurement of a non-slip coating compound with the NSN 8010-12-406-0602, quantity of two units, under solicitation SPE8ES-26-T-2326. The item is classified as a Type I (Code M) with a strict 24-month non-extendable shelf life, and must be stored above freezing but below 104 degrees Fahrenheit, away from direct sunlight. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, and adhere to DLA packaging requirements. The coating compound is subject to Hazard Communication Standard regulations, requiring suppliers to submit Safety Data Sheets and compliant hazard labels aligned with 29 C.F.R. 1910.1200 prior to award, along with documentation that employees have been trained on these updated requirements. Technical and quality specifications are referenced through the DLA Master List of Technical and Quality Requirements, and must be met in full. The delivery is FOB destination with no variance allowed, inspection and acceptance occur at the delivery point, and the required delivery date is 173 days after award, with a need ship date of January 4, 2027 and original required delivery date of March 28, 2027. The item must be delivered to DLA Distribution San Diego at the specified address, with transport governed by DLAD Proc Note C19 and C20. The product is manufactured by Goldhofer Airport Technology GmbH, part number 120190, and specifications reference MIL-STD-129R, MIL-STD-147F, and FED-STD-313F.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cybersecurity Compliance for Covered Contractor SystemsThe contract requires the implementation and documentation of cybersecurity controls aligned with NIST SP 800-171 for all systems handling covered defense information, including technical data, delivery schedules, and compliance reports. This effort is critical to ensure the protection of sensitive government information and must be completed according to federal cybersecurity standards. The subcontractor is responsible for fully adhering to the required control families, maintaining accurate documentation, and demonstrating ongoing compliance throughout the contract term. The work is being performed under the auspices of the Defense Logistics Agency within the Department of Defense and falls under NAICS code 541512, indicating it involves computer systems design services. The contract is positioned as a subcontract, and while no specific set-aside designation is provided, performance is expected to meet all applicable federal cybersecurity mandates. Completion of this obligation is essential for maintaining eligibility to handle protected defense information and supporting the broader defense supply chain’s security posture.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

Quality Assurance and ISO 9001 Compliance SupportThe contract requires comprehensive quality system oversight to maintain strict adherence to ISO 9001:2015 standards, focusing on internal audits, corrective action management, and preparation of Certificate of Conformance and Quality Control documentation for government acceptance at the point of origin. The work is integral to ensuring that all deliverables meet the rigorous quality expectations of the Department of Defense, particularly under the Defense Logistics Agency’s oversight, with an emphasis on systemic compliance rather than isolated inspections. This subcontract falls under NAICS code 541330, indicating specialized scientific and technical consulting services related to quality assurance. Performance is tied to meeting federal acceptance criteria at origin, requiring continuous monitoring, documentation rigor, and proactive resolution of nonconformities. The contract is posted for potential bidders as of July 28, 2026, with no stated set-aside designation, and the place of performance details are not yet specified, though the primary accountability lies with supporting DLA’s quality assurance framework for defense supply chain integrity.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.

Other Scientific and Technical Consulting Services

POSTED

about 14 hours ago

DEADLINE

Supply of Industrial Cable and Conduit (Electrical Components)The contract entails the supply and delivery of electrical cable and conduit assemblies specifically designed for military or critical infrastructure applications, requiring full compliance with MIL-STD packaging, labeling, and hazardous materials handling regulations to ensure operational readiness and safety. All components must meet stringent military standards for durability, performance, and environmental resilience under demanding conditions. Delivery is specified as FOB Destination to the Defense Logistics Agency Distribution Center in New Cumberland, Pennsylvania, placing responsibility for transportation and risk transfer on the supplier until the goods arrive at the designated location. The contract falls under NAICS code 335999 for other electrical equipment and component manufacturing and is structured as a subcontract within the broader Department of Defense procurement framework, administered by the Defense Logistics Agency. All activities must adhere to federal contracting guidelines and regulatory compliance requirements applicable to defense supply chains.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Quality Inspection and Source Acceptance at OriginThe contract requires comprehensive quality inspection services at the manufacturer’s facility to support government-origin inspections, ensuring full compliance with AS9100 standards and all specified technical requirements. First-article and batch inspections are mandatory to verify conformance prior to shipment, serving as a critical checkpoint for acceptance by defense logistics authorities. The work is performed under a subcontract tied to the Defense Logistics Agency, operating under the Department of Defense, with the NAICS code 541330 indicating engineering and technical services related to quality assurance. All inspections must align with stringent defense procurement protocols, emphasizing precision, documentation, and traceability throughout the manufacturing process. The contract is active as of July 28, 2026, and is linked to award number SPE7L326P5097.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Packaging, Labeling, and Kitting Services for DoD DeliverablesThe contract requires the provision of value-added packaging, preservation, labeling, and kitting services for seals intended for use by the Department of Defense, with strict adherence to military packaging and traceability standards. All services must ensure that products are properly prepared, protected, and documented to meet the rigorous operational and logistical requirements of DoD supply chains, including compliant labeling and full traceability throughout the handling process. This subcontract, issued under NAICS code 493190 by the Defense Logistics Agency, is designed to support the secure and efficient delivery of critical components to military operations. The work will be performed in alignment with DoD regulations, though specific performance locations and point of contact details are not provided. The solicitation was posted on July 28, 2026, and the contract is accessible through the DIBBS system under award number SPE7L326P5097.

Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Supply of Nonmetallic Round Section Seals (NSN 5330015240852)The contract involves the manufacture and delivery of nonmetallic round section seals meeting U.S. military specifications, with a focus on compliance, traceability, and proper packaging and labeling. The product is identified by NSN 5330015240852 and falls under NAICS code 326299, indicating it pertains to other plastics product manufacturing. The work is being procured under a subcontract arranged by the Defense Logistics Agency, a component of the Department of Defense, ensuring the seals meet rigorous military standards for performance and reliability. The contract includes stringent requirements for documentation and supply chain traceability to support quality control and accountability throughout the logistics pipeline. All deliverables must adhere to the specified military specifications, with attention to material composition, dimensional accuracy, and environmental resilience. Proper packaging and labeling are mandatory to ensure safe handling, storage, and identification during transit and use. The place of performance and contact details are not specified, but the contract is accessible via the DLA’s public award system under the reference number SPE7L326P5097. The solicitation was posted in July 2026, indicating this is a forward-looking procurement aimed at securing critical sealing components for defense applications.

All Other Rubber Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of all NIST SP 800-171 cybersecurity controls to ensure compliance with DFARS 252.204-7012, specifically focusing on the development of a comprehensive System Security Plan and a Plan of Action and Milestones document. These deliverables must detail the organization’s approach to protecting controlled unclassified information within its systems, outlining current security postures, identified gaps, and remediation strategies with defined timelines. The work is scoped as a subcontract under the Defense Logistics Agency, Department of Defense, and is tied to the NAICS code 541512 for computer systems design services, indicating the need for technical expertise in cybersecurity architecture and documentation. Implementation must align precisely with federal cybersecurity standards, requiring thorough assessment of existing controls, gap analysis, and coordinated efforts across technical and administrative teams to achieve full compliance. Documentation must be accurate, up to date, and capable of withstanding audit scrutiny, with all measures designed to safeguard federal contract information. The contract does not specify a place of performance or point of contact, suggesting flexibility in execution location while maintaining strict adherence to DoD cybersecurity requirements. The solicitation was posted in 2026, indicating the timeline for performance is likely to begin shortly thereafter, with all deliverables due within a timeframe consistent with federal acquisition obligations.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

Transportation and Delivery to DLA New CumberlandThe contract specifies the transportation and delivery of packaged retainers to DLA Distribution in New Cumberland, Pennsylvania, under FOB Destination terms, meaning the supplier retains responsibility for all costs and risks until the goods arrive at the designated delivery point. Invoicing must be processed through the Web-Based Acceptance and Fulfillment system, ensuring standardized and efficient payment processing. Compliance with a 77-day Average Days to Outstanding (ADO) requirement is mandatory, emphasizing timely and accurate fulfillment and documentation to meet Defense Logistics Agency performance benchmarks. The procurement is classified under NAICS code 484220, indicating it pertains to truck transportation of freight, and is structured as a subcontract within the Department of Defense’s logistics framework, with no set-aside provisions specified. The contract was posted on July 28, 2026, and is managed through the DIBBS portal under contract number SPE7L326V4410.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

Military Property and Shipment MarkingThis contract requires full compliance with MIL-STD-129 and MIL-STD-130N standards for the proper marking of military property prior to shipment, ensuring accurate identification and traceability throughout the defense logistics chain. All items must be labeled with data matrix codes and unique item identification (UID) tags that meet stringent Department of Defense specifications, enabling automated tracking and inventory management across military supply systems. The work encompasses the application of these markings on equipment, containers, and packaging in accordance with government-mandated protocols for uniformity and durability under operational conditions. The contract is classified as a subcontract under NAICS code 541990 and is managed by the Defense Logistics Agency, a component of the Department of Defense. Although specific performance locations and contact details are not provided, the scope is tied to the broader mission of standardizing military property identification to support logistics efficiency and accountability. The contract was posted on July 28, 2026, and is accessible through the DIBBS system via the referenced UI link, indicating it is part of an active procurement process aimed at securing compliant marking services from qualified subcontractors.

All Other Professional, Scientific, and Technical Services

POSTED

about 14 hours ago

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of retainers in strict compliance with MIL-STD-2073-1E standards, utilizing MIL-DTL-117 Type II, Class C, Style 1 bags and preservation method 33, which specifies CLNG/DRY conditions to ensure long-term protection against environmental degradation. All items must be prepared, sealed, and labeled according to military specifications to maintain readiness and integrity during storage and transportation. Palletization must adhere to RP001 guidelines to ensure structural stability, efficient handling, and compatibility with military logistics systems. The work is being conducted under a subcontract for the Defense Logistics Agency, a branch of the Department of Defense, and falls under NAICS code 493130, which pertains to warehousing and storage services. The contract was posted on July 28, 2026, with performance location and specific delivery details not specified in the available data, but execution is expected to meet rigorous defense standards for inventory management and deployment readiness.

Farm Product Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Hazardous Material Labeling and Safety Data ComplianceThe contract pertains to the development and validation of hazard labels and Safety Data Sheets that meet OSHA compliance standards for hazardous materials utilized in production or packaging operations. The work involves ensuring all labeling and documentation accurately reflect the chemical properties, risks, handling procedures, and emergency measures required by federal regulations, with a focus on aligning with OSHA’s Hazard Communication Standard. The deliverables must be technically accurate, consistently formatted, and verified through validation processes to guarantee regulatory adherence across all applicable materials. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 541380 for other scientific and technical consulting services. The contract was posted on July 28, 2026, and the scope of performance is not geographically restricted, though the work is tied to defense-related production or packaging activities. Compliance with federal safety regulations is critical, and failure to meet OSHA requirements could result in rejection of deliverables or operational disruptions. The subcontractor must possess expertise in chemical safety documentation and understand the unique demands of defense-sector supply chains.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE