Fitness Equipment

Combined Synopsis/Solicitation (Fitness Equipment) This acquisition is 100% set aside for small business. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. The announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation is being issued as a request for quotation (RFQ). RFQ # M67399-14-Q-00018 The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-72. This is a restricted purchase set-aside for 100% Small Business Concerns. The North American Industry Classification System Code (NAICS) is 339920. The Standard Industrial Classification Code (SIC) for this order is 3949. The small business size standard is 500 employees. The Federal Supply Classification (FSC) for this order is 7810. All equipment must be able to withstand desert temperatures of at least 100 degrees. CLIN 0001 - Qty: 16,Cannonball Pushup Bars, with the following specifications: Pushup bars to be made of steel or other durable and hard material that will withstand desert temperatures of at least 100 degrees. CLIN 0002 - Qty: 16, Strongman Heavy Hammer, with the following specifications: Hammer will be 18 lbs and made of durable and strong material that will withstand desert temperatures of at least 100 degrees. CLIN 0003 - Qty: 04, Outdoor Plyo & Exercise Platform with the following specifications: The platforms are to be made of aluminum. Each set is to include 12", 18", 24" and 30" exercise platforms. This will be a "set", there are four sets requested for this requirement. CLIN 0004 - Qty: 04, 7 Spot Agility Ladder with the following specifications: The ladder is to be made of durable material and have 7 "rungs" for various exercises. CLIN 0005 - Qty: 08, 2 Way Power Sleds with the following specifications: The sleds will be made of durable material with the capability to be pushed and pulled. CLIN 0006 - Qty: 02, Strongman Wheelbarrow with the following specifications: The wheelbarrows will be made of strong and durable material and be able to withstand desert summer heat. The wheelbarrow must be able to hold at least 100 lbs. CLIN 0007 - Qty: 02, Strongman Flip Poles with the following specifications: The flip poles will be purchased as a "set", with the following measurements; 6', 8', and 10' as a set. There will be 4 sets purchased with this requirement. CLIN 0008 - Qty: 40, Standard Chrome Dumbell Handle CLIN 0009 - Qty: 80, 1" Lock Jaw Collars CLIN 0010 - Qty: 180, Standard 1" 10 lbs Weight Plates with the following specifications: The plates are to be black with a 1" measurement and have a weight of 10 lbs. CLIN 0011 - Qty: 80, Standard 1" 5 lbs Black Plates with the following specifications: The plates are to be black with a 1" measurement and have a weight of 5 lbs. CLIN 0012 - Qty: 80, Standard 1" 2.5 lbs Black Plates with the following specifications: The plates are to be black with a 1" measurement and have a weight of 2.5 lbs. CLIN 0013 - Qty: 8, Hex Bars - Chrome, with the following specifications: The hex bars are to have a chrome finish and be made of durable material. CLIN 0014 - Qty: 4 sets, Kettlebells with the following specifications: The following Kettlebell weights are required; 25 lbs, 35 lbs, 45 lbs and 55 lbs. These 4 weights make up one "set", the requirement calls for 4 sets; 16 weights total. CLIN 0015 - Qty: 8, Kettlebells with the following specifications: The Kettlebells are to be a weight of 100 lbs each. CLIN 0016 - Qty: 4 sets, Slam Balls with the following specifications: The Slam Balls are to be the following weights; 15 lbs, 20 lbs, 30 lbs, 40 lbs, 50 lbs, 60 lbs and 70 lbs. There are 7 different weights that make up one "set". The requirement calls for 4 sets of the Slam Balls. The Slam Balls should have minimal bounce when "slammed". CLIN 0017 - Qty: 8, Dip Belts with the following specifications: The Dip Belts are to be made of a durable material to withstand the desert heat. CLIN 0018 - Qty: 16, Weighted Jump Ropes with the following specifications: The Weighted Jump Ropes are to be made of a durable material that will withstand the desert heat. CLIN 0019 - Qty: 120, Thick Rubber Mats with the following specifications: The Rubber Mats need to be made of a durable and thick material with the following measurements; 4' x 6' x ". The requirement calls for 120 Rubber Mats. CLIN 0020- Qty: 32, Thick Rubber Mats with the following specifiations: The Rubber Mats need to be made of a durable and thick material with the following measurements; 2' x 2' x ". The requirement calls for 32 Rubber Mats. Point of Contact: Sgt Andrews, Trevor +1 (555) 000-0000/contact@example.gov Place of delivery will be Marine Corps Air Ground Combat Center (MCAGCC)/Marine Corps Air Ground Task Force Training Command (MCAGTFTC) Twentynine Palms, CA. The final delivery address will be provided upon contract award. The awardee of this award is required to be registered with, understand, and invoice through Wide Area Workflow. The following Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation (DFAR) provisions and clauses are applicable to this acquisition. All provisions and clauses may be found at the following website: http://farsite.hill.af.mil/. FAR: 52.204-2, 52.204-7, 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5(a)(1)(b)(11)(i)(24)(25)(26)(27)(29)(36)(38)(45), and 52.247-34. DFARS: 252.203-7000,252.203-7000(Alt A), 252.232-7003, 252.232-7006, 252.232-7010, 252.247-7023 (Alt III), 252.211-7003. Note: The complete provision of Federal Acquisition Regulation (FAR) 52.212-3 must accompany bid submittal. Provision 52.212-2, Evaluation-Commercial items, applies to this acquisition. Paragraph (a) of this provision is hereby replaced with the following: Award will be made to the low, responsive, responsible quoter meeting or exceeding the acceptability standards for non-price evaluation factors. The non-price evaluation factors and their acceptability standard are: (1) Technical capability of the items offered to meet the Government requirement. Vendors are required to register or update their registration on the Central Contractor Registration website at https://www.sam.gov/portal/public/SAM/. This registration is required to receive contract award and will facilitate payment. This contract will be based on Lowest Price Technically Acceptable (LPTA). This procurement is being conducted under FAR 13.5. *** It is very important that all vendors and contractors follow all instructions provided below, when quotes are submitted *** Please include affirmative certification of ability to comply with Required Delivery Date. Additional information required in quotation: DUNS #, CAGE CODE #, and TIN #. The Government is seeking F.O.B Destination. If you have any questions or concerns, please contact Sgt Andrews, Trevor at +1 (555) 000-0000 or Email: contact@example.gov. All questions are due by 1200 (12:00 PM) PST June 5th, 2014. Questions shall be directed to Sgt Andrews, Trevor, Contract Specialist, Email: contact@example.gov. Questions are requested to be submitted via Email. Answers to all questions received will be posted via amendment to this solicitation no later than 1200 (12:00 PM) PST June 9th, 2014. Quotations are due by 1600 (04:00 PM) PST June 11th, 2014 at the Regional Contracting Office, MCAGTFTC/MCAGCC, Bldg. 1102, Door 21, Twenty nine Palms, CA 92278-6053, ATTN: Sgt Andrews, Trevor, Contract Specialist, Telephone # +1 (555) 000-0000, Email: contact@example.gov. Faxed quotations will not be accepted. Please submit your quotations via any method listed below: E-mail Federal Express or like Service Hand-Carried to the Office For quotes delivered by hand, quoters are advised that entry to the installation is restricted, and quoters are directed to familiarize themselves with the entry control location and process. Entry processing time is unpredictable and can be lengthy. The addressee indicated above may be able to facilitate entry processing, but is not required to do so, and inability to gain access shall not excuse late delivery. If quotes are submitted in different formats requiring different delivery methods, the quote of record shall be the last complete version received prior to the deadline. For email quotes, the Government office designated for receipt of the quote is the email inbox of the addressee indicated above. Notwithstanding the provisions at FAR 52.212-1(c) or FAR 52.215-1(c)(3), delivery is not accomplished until the addressee can open the email; delivery to a server or an email inbox on a server is not considered delivery to the designated Government office and the quotation is not under the Government's control until the addressee can open the email. The email shall not be considered to be delivered unless the entire content of the email and all attachments can be read by the addressee indicated above. Receipt of an electronic acknowledgment from the addressee establishes that a record was received but does not establish that the content sent corresponds to the content received. Email attachments are limited to no more than 2MB. Quoters are specifically warned that email may be subjected to spam filters or attachment stripping. All transmissions must clearly state the solicitation number and the name of the contracting specialist on the first page to ensure proper receipt. Attention is directed to FAR 52.212-1(c), concerning late submissions. Quoters are responsible for allowing adequate time for transmission to be completed. The quoter bears the risk of non-receipt of transmissions, and should ensure that all pages of the proposal (and any authorized modifications) have been received by the designated office before the deadline indicated. Pages of a transmission that arrive after the deadline will not be considered. The Government may make award based solely on the quote received. MCAGCC Access/Security Requirements-Contractor and Contractor-Employee Access Conditions: 1. Access Procedures Are Mandatory: The contractor shall comply with all current access procedures throughout all performance periods under this contract, and changes to these procedures shall not constitute grounds for contractor claims or request for equitable adjustment. All contractor employees are required to obtain business access or permanent business access. Daily access procedures must not be used to circumvent background check requirements outlined below. Attempts to improperly use daily access procedures may result in denial of access to the involved employees. 2. Business Access: Required for contractor employees requiring access for periods from one day to one year. Submit the following: - A valid form of Federal or state government I.D. - If driving a motor vehicle, a valid driver's license, vehicle registration and proof of insurance. - Proof of employment on a valid Government contract (e.g., a letter from the prime contractor including contract number and term). - Proof of an employee background check conducted within the past year covering the previous two years. Contractor employee background checks are conducted at contractor expense. The background check: (a) must establish the employee's citizenship or legal alien status. Acceptable documents include birth certificate, Immigration and Naturalization Service (INS) forms and passports. (b) must include proof of a criminal records check from the county or state where the employee resided for the previous two years (or length of legal residence for foreign nationals in the U.S. for less than two years). (c) will be subject to Government verification via the FBI National Crime Information Center (NCIC) Interstate Identification Index (III). If the background check is selected for verification, the employee will be required to submit fingerprint records to the FBI Automated Fingerprint Identification System (AFIS) database. NCIC checks and fingerprinting will be performed at Government expense. Note: All contractor personnel performing work under this contract requiring access to the military installation shall obtain personal entry and a vehicle pass from the Provost Marshal's Office (PMO) of the Combat Center. For the MCAGCC/MAGTFTC, this process includes the completion of a COMBAT CENTER ACCESS AUTHORITY letter issued by the Regional Contracting Office (NW). 3. Permanent Business Access: Required for contractor employees requiring access for periods from one to three years. Submit all items listed above under "business access." NCIC check and fingerprint of all contractor employees will be conducted at Government expense. Contractor-provided background checks will be reevaluated annually, and will be updated by the contractor as required at the contractor's expense. 4. Emergency Access: Each Marine Corps installation develops its own procedures which allow the contractor quick access without compromising installation security for situations in which contractor response is crucial in order to preserve and/or restore critical facilities. The contractor is responsible for ascertaining and complying with the procedures established by each installation on which it does business. 5. Installation Access Badges: Each Marine Corps installation develops its own procedures for readily identifying contractor employees working on the installation. The installation may either provide access badges to individual contractor employees at government expense or it may require the contractor to provide badges to its employees, at its expense. The contractor is responsible for ascertaining and complying with the procedures established by each installation on which it does business. 6. Denial of Access: The Commanding General of each installation has broad authority to remove or exclude any person in fulfilling his responsibility to protect personnel and property, to maintain good order and discipline, and to ensure the successful and uninterrupted performance of the Marine Corps mission. In the exercise of this authority, the Commanding General may refuse to grant access or may bar contractor employees, including employees who have previously been granted access. Refusal to grant an employee access or barment of an employee does not relieve the Contractor of the responsibility to continue performance under this contract. Among other reasons, access may be denied if it is determined that an employee: a. is on the National Terrorist watch List. b. is illegally present in the United States. c. is subject to an outstanding warrant. d. has knowingly submitted an employment questionnaire with false or fraudulent information. e. has been issued a debarment order and is currently banned from military installations. 7. Employee Identification: Contractor personnel performing work under this contract shall be readily identifiable as an employee of the contractor through the use of uniforms or nametags, or via an alternate method approved by the Contracting Officer. 8. Employee Compliance. The Contractor's employees shall observe and comply with all MCAGCC/MAGTFTC rules and regulations applicable to contract personnel, including those applicable to the safe operation of vehicles, and shall not be present in locations not required for the proper performance of this contract. Contractor personnel and equipment entering a military installation are subject to security checks. Contractor personnel shall follow any direction given by military police, law enforcement, or other security or safety personnel. 9. Contract Termination: The Contractor is responsible for ensuring clearances, permits, passes, or security badges are promptly returned to the issuing activity upon termination of an employee, completion of a project, or termination of a contract or subcontract.