Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SPRING, FLAT

Active
SPE7L1-27-T-3162Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L1-27-T-3162 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one flat spring, identified by NSN 5360-01-368-7485. The requirement specifies a delivery timeframe of 20 days after receipt of the order, with an original required delivery date of September 3, 2026. Delivery is FOB Origin to Fort Hood, Texas. Offerors must submit their quotations by November 12, 2026. Those proposing alternate parts are required to provide a complete data package for both the approved and alternate parts to facilitate evaluation. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates the DLA Master List of Technical and Quality Requirements and imposes specific restrictions on the use of mercury, requiring compliance with NAVSEA 5100-003D. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, such as the Buy American Act, safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment. Inspection and acceptance will occur at the destination per FAR 52.246-1.

General Info

DLA request for quotations to procure one flat spring for Fort Hood, Texas.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332613 - Spring Manufacturing

Place of Performance

BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
DEREK ROBERTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,FLAT
SPRING,FLAT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DELTA INTL MACHINERY CORP
TUPELO MS
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5360-01-368-7485 Quantity: 1 EA Purchase Request: 7018220782QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
Helical Torsion Spring FabricationThis subcontract involves the fabrication of seven helical torsion springs for the DLA Weapons Support Land Supply Chain. The manufacturer is required to produce the units according to Basic Drawing NR 53711 7066804 Revision A using precision winding and coiling machinery to meet the specifications of NSN 5360-01-486-1982. Performance will take place in Greensboro, North Carolina, under NAICS code 332613. Strict quality and regulatory standards are mandated for this project, including zero non-conformances per MIL-STD-1916 or ASQ Z1.4. The contractor must maintain US/Canada Joint Certification Program certification and ensure full compliance with DFARS 252.204-7012. The solicitation was posted on October 30, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE4A6-27-T-6342
Solicitation SPE4A6-27-T-6342, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for five helical compression springs, identified by NSN 5360-01-033-2517 and Honeywell Aerospace part number 3165585-1. This is not a small business set-aside and falls under NAICS code 332613. The required delivery is 171 days after order, with shipping terms set as FOB Origin and delivery to Arizona Industries for the Blind in Phoenix, Arizona. The need ship date is April 20, 2027, with an original required delivery date of June 30, 2027. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically RA001, RP001, RQ001, RQ011, and RT001. Quality assurance requires a manufacturer inspection system complying with ISO 9001:2015 or equivalent, with sampling conducted per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging must follow ASTM D3951 and MIL-STD-129, while payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes DFARS 252.204-7012 for cybersecurity and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-27-T-6061
Solicitation SPE4A6-27-T-6061 is a Request for Quotations issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of 16 retaining rings, identified by NSN 5325014872317. This is not a small business set-aside. The required delivery date is March 18, 2027, with a need ship date of April 20, 2027. Delivery is FOB Origin, and both inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific AQL levels assigned for critical, major, and minor attributes. Notably, the use of mercury or mercury-containing compounds is prohibited in the hardware, preservation, and packaging. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORSION
Solicitation # SPE7L1-27-Q-0138
Solicitation SPE7L1-27-Q-0138 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of seven helical torsion springs, identified by NSN 5360-01-486-1982. The items must be manufactured according to Basic Drawing NR 53711 7066804 Revision A and delivered within 265 days after the date of the order. Inspection and acceptance will occur at the destination, with quality standards requiring zero non-conformances in sample lots based on MIL-STD-1916 or ASQ Z1.4. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. This procurement involves significant regulatory and security requirements. The technical data is subject to export control under ITAR or EAR, requiring offerors to possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-controlled technical data training. Additionally, the contract mandates compliance with DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and quotations must remain valid for 90 days. This is not a small business set-aside.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-27-T-1747
Solicitation SPE7L1-27-T-1747, issued by the DLA Weapons Support Land Supply Chain, is a fixed-price request for 12 helical compression springs (NSN 5360-00-939-5729). The procurement requires materials to comply with ASTM-A313 and tolerances per MIL-STD-29. Delivery is required within five days after receipt of order to Fort Riley, Kansas. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), with a price evaluation preference available for certified HUBZone Small Business Concerns. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training. Inspection and acceptance will occur at the destination per FAR 52.246-1, with a requirement for zero non-conformances in sample lots. Additionally, the awardee must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring SupplyThis subcontract involves the supply of 11 helical compression springs for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The selected provider is responsible for manufacturing or sourcing springs that strictly adhere to NSN 5360150565298 specifications and ensuring all items are packaged according to RP001 DLA Packaging Requirements for Procurement. To be eligible for this requirement, contractors must possess a valid CAGE code and Unique Entity Identifier. The performance of this contract will take place in Greensboro, North Carolina, under NAICS code 332613. Responses are due by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring SupplyThis subcontract through the DLA Weapons Support Land Supply Chain requires the manufacture or sourcing of six helical compression springs meeting NSN 5360014822995 specifications. The selected provider must possess spring winding machinery and provide Mill-Material Certification to ensure technical compliance. All deliverables must include a Quality Compliance Certification to verify that the components meet the necessary standards. Operational requirements include strict adherence to MIL-STD-129 for marking and quality control, as well as MIL-STD-2073-1E for packaging. The performance of this contract is centered in Greensboro, North Carolina, under NAICS code 332613. Interested parties must submit their responses by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
Supply of Tapping Screws (NSN 5305004324204)This subcontract involves the supply of 700 tapping screws, identified by NSN 5305004324204, for prime contractors working on Defense Logistics Agency procurement projects. The items must be packaged according to MIL-STD-2073-1E and sampled in accordance with MIL-STD-1916 or ASQ H1331. Delivery is required FOB Origin to the DLA Distribution center located in Cherry Point, North Carolina. To ensure quality and compliance, the manufacturer must maintain inspection systems that meet SAE AS9003 or ISO 9001 standards. Additionally, a Certificate of Conformance is required per FAR 52.246-15. This requirement is managed by the DLA Weapons Support ASC Commodities Division under NAICS code 332613, with a response deadline of November 6, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332613
New
DIBBS
Supply of Helical Compression Springs (NSN 5360009957944)This subcontract involves the manufacture and supply of helical compression springs meeting NSN 5360009957944 specifications for prime contractors under the DLA Weapons Support Land Supply Chain. The selected provider is responsible for sourcing or producing the springs and coordinating delivery to designated government destinations via First Destination Transportation, with all reporting managed through the Wide Area Workflow system. The contract requires strict adherence to domestic material restrictions mandated by the Berry Amendment and the Buy American Act. Performance will take place in Greensboro, North Carolina, under NAICS code 332611. Interested parties must submit their responses by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
Supply of Helical Compression Springs (NSN 5360004863489)This subcontract involves the manufacture or sourcing of two helical compression springs under NSN 5360004863489 for the DLA Weapons Support Land Supply Chain. The selected provider must ensure all products adhere to strict government specifications, including specific packaging and labeling standards, to support prime contractors on Department of Defense supply contracts. Performance for this contract will take place in Phoenix, Arizona. To be eligible, contractors must maintain an active SAM registration and provide certification regarding the use of covered defense telecommunications equipment. The response deadline for this opportunity is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
Precision Spring SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the sourcing or manufacture of four precision springs, specifically PALL Aeropower Corporation part number AA-B217-162D22. The selected provider must supply a complete technical data package for evaluation to ensure the components meet the necessary specifications for prime contractors delivering DLA supply contracts. Performance of the contract will take place in Phoenix, Arizona. The supplier is required to adhere to strict military standards for packaging and marking, specifically following RP001, MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
Supply of Helical Compression Spring (NSN 5360016231936)This subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, requires the procurement of one helical compression spring identified by NSN 5360016231936. The part must be produced using standard winding and forming equipment, as additive manufacturing is strictly prohibited. The successful contractor must ensure compliance with DFARS 252.204-7016 concerning covered telecommunications equipment and deliver the completed item FOB Destination to the specified location in FPO. The opportunity was posted on October 29, 2026, with a response deadline of November 9, 2026. Falling under NAICS code 332613, this requirement is intended for prime contractors supporting Department of Defense projects. All deliverables must meet the technical specifications associated with the provided National Stock Number to ensure compatibility and performance standards.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488410
New
DIBBS
Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for the Department of Defense under the DLA Weapons Support Land Supply Chain. The scope of work requires the contractor to package seven torsion springs in strict accordance with MIL-STD-2073-1E standards, specifically utilizing QUP:001, PRES MTHD:10, and CLNG/DRY:1. Additionally, the contractor must apply all necessary marking and labeling per MIL-STD-129 using industrial marking equipment and military-specification preservatives. The project is categorized under NAICS code 488410 and will be performed in Greensboro, North Carolina. Interested parties must note the response deadline of November 13, 2026, for this specific requirement to deliver fully processed shipments for prime contractors.
Motor Vehicle Towing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 423610
New
DIBBS
Storage Battery Supplier (NSN 6140-01-694-9187)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the procurement of two storage batteries meeting NSN 6140-01-694-9187 specifications. The supplier is responsible for ensuring all items are marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements, with a specific mandate that outer packaging be labeled as nonspillable. The contract stipulates that the two packaged and marked batteries must be delivered FOB Origin within 60 days of the order date. This requirement falls under NAICS code 423610 and is intended to support prime contractors delivering on DLA supply contracts.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
Kit Assembly and Packaging ServicesThis subcontract for Kit Assembly and Packaging Services supports the DLA Weapons Support Land Supply Chain by providing final kitting, packaging, and marking for prime contractors. The selected provider will be responsible for gathering components, verifying counts, and ensuring all installation kits are fully assembled, marked, and palletized. All work must strictly adhere to MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130 standards. A critical requirement for this engagement is demonstrated experience with Unique Item Identification marking. The project falls under NAICS code 333999 and is managed by the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance at the designated facility in zip code 17070-5002.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332322
New
DIBBS
Custom Brackets and Sheet Metal FabricationThis subcontract involves the fabrication of custom formed metal brackets, plates, and housings intended for prime contractors supporting DLA Weapons Support Land Supply Chain installation kits. The scope of work includes sheet metal cutting, bending, punching, and finishing processes that must strictly adhere to TDP Rev B Gen 2 specifications. Additionally, all components must receive finishes that meet rigorous military corrosion resistance standards to ensure durability and performance. Managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, the project falls under NAICS code 332322. The performance of the contract is centered in the 17070-5002 zip code area. Interested parties should note the response deadline of December 1, 2026, for this specialized manufacturing requirement.
Sheet Metal Work Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Specialized Fasteners and Hardware SupplyThis subcontract involves the procurement of nuts, bolts, screws, and specialized fasteners to support prime contractors delivering installation kits for the DLA Weapons Support Land Supply Chain. All provided hardware must strictly adhere to the grade and material standards specified in the TDP Rev B Gen 2 reference drawings. Due to the critical nature of the components, the supplier is required to maintain quality certification for aerospace and defense grade fasteners to ensure all deliveries are fully certified. Managed by the Department of Defense under NAICS code 332722, the contract was posted on October 30, 2026, with a response deadline of December 1, 2026. Performance for this requirement is centered in the 17070-5002 zip code area. Interested parties can find further details through the DLA Weapons Support Land Supply Chain procurement portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
DIBBS
Precision Machined Components for Vehicular Installation KitsThis subcontract involves the manufacture of precision metal parts and hardware intended for vehicular installation kits supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the use of CNC machining, milling, turning, and drilling to produce components that strictly adhere to material specifications and military drawing tolerances as outlined in the TDP Rev B Gen 2 reference drawings. The project is managed under NAICS code 332710 for the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance located in the 17070-5002 zip code area. The final deliverable consists of finished machined metal components that meet all specified technical requirements for prime contractors.
Machine Shops

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 326220
New
DIBBS
Supply of Rubber O-Rings (NSN 5331-01-119-0468)This subcontract involves the procurement of 478 rubber O-rings, part number 5331-01-119-0468, to support prime contractors under DLA supply contracts. The selected provider is responsible for fabricating or sourcing these components in strict accordance with technical drawings, while providing all necessary material certifications and process operation sheets. All shipments must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract requires full compliance with DFARS prohibitions regarding Chinese military and Huawei-related products. Performance will take place in San Diego, California. The final delivery must include the total quantity of O-rings along with all required certifications to ensure technical and regulatory compliance.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing and Supply of Operating Rods (Aft)This subcontract involves the manufacturing and supply of 20 precision-machined aft operating rods, identified by NSN 5340-01-493-9406, for prime contractors supporting DLA Aviation aircraft hardware projects. The work is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, falling under NAICS code 336413. The contractor is required to fabricate the components to strict government specifications and implement Unique Item Identification using 2D data matrix symbology in accordance with ISO/IEC 16022. Final delivery must include the specified units along with compliant UII markings and all necessary receiving reports.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 333515
New
DIBBS
Spur Gear Fabrication (P/N 3-51145-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture and supply of new, unused spur gears, specifically part number 3-51145-1. The selected contractor must utilize precision gear cutting and machining equipment to ensure the product meets exact technical specifications. A critical requirement of the contract is the performance of Government First Article Testing to validate conformity, with the final deliverables consisting of the physical spur gears and the corresponding test results. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333515. To be eligible, the provider must be an approved source or demonstrate the ability to produce an exact product as outlined in Section L. The response deadline for this requirement is November 30, 2026, with performance taking place in the 84056-5734 zip code area.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336350
New
DIBBS
WEIGHT, COUNTERBALANCE
Solicitation # SPE7L1-27-T-1759
Solicitation SPE7L1-27-T-1759 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of two counterbalance weights, identified by NSN 3040-01-627-0637. The contract requires delivery within 129 days after receipt of order, with shipping and acceptance terms set as FOB Origin. Delivery is designated for the DLA Distribution San Joaquin facility in Tracy, California. Offerors must submit quotes via the DIBBS system and are encouraged to provide quantity ranges to accommodate demand volatility. The procurement is subject to stringent quality and security standards, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Key technical restrictions include a total prohibition on Class I ozone depleting chemicals and the unauthorized use of additive manufacturing. The contract incorporates significant regulatory requirements, including ITAR and EAR export controls, CMMC Level 2 cybersecurity certification, and compliance with the Buy American Act and Berry Amendment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Payment will be processed electronically through the Wide Area WorkFlow system.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332999
New
DIBBS
ROD, OPERATING, AFT
Solicitation # SPE7L1-27-R-0009
Solicitation SPE7L1-27-R-0009 is a full and open competition procurement issued by the DLA Weapons Support Land Supply Chain for the supply of 20 units of ROD, OPERATING, AFT (NSN 5340-01-493-9406). The required delivery date is 298 days after the date of award, with both inspection and acceptance occurring at the destination. Award decisions will be based on a trade-off between price and non-price factors, with past performance, proposed delivery, and socioeconomic support serving as the primary evaluation criteria. The contract mandates strict compliance with technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the use of MIL-STD-1916 or ASQ H1331 for sampling. Items must be marked with unique item identifiers using ISO/IEC 16022 two-dimensional data matrix symbology. Due to the nature of the technical data, offerors must possess an approved US/Canada Joint Certification Program certification and adhere to ITAR or EAR export controls. Additionally, the contractor must meet CMMC Level 2 certification requirements and utilize the Wide Area WorkFlow system for electronic invoicing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332613
Awarded
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-25-T-992X
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 332613
Awarded
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-596J
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS