Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING, HELICAL, COMP

Active
SPE7L5-26-T-4315Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of seven helical compression springs with NSN 5360-01-331-1111 under solicitation SPE7L5-26-T-4315, issued by the Department of Defense through the Land Supplier Operations Engines office. The response deadline is July 23, 2026, with delivery required within 39 days of award, and performance will occur in Phoenix, Arizona. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Zero non-conformances are required in samples unless otherwise directed. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware except in specific applications such as batteries, fluorescent lights, functional instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. All items must be marked per MIL-STD-130N for U.S. military property identification.

General Info

Seven helical compression springs, NSN 5360-01-331-1111, solicited by DLA for DOD use, bid via DIBBS by July 20, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

515 N 51ST AVENUE NUMBER 130 DOCK 2, PHOENIX, AZ, 85043, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L5-26-T-4315 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS ENGINES
View Agency Profile
Office AddressUS
Contacts
Mary Rowley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMP
SPRING, HELICAL, COMPRESSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ADEQUATE DATA FOR NSN/Part Number: 5360-01-331-1111 Quantity: 7 EA Purchase Request: 7014658055QTY: 7 Delivery: 39 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
Precision Tube Fittings ManufacturingThe contract entails the manufacture and supply of 1,409 ELBOW, TUBE TO BOSS fittings conforming to MIL-DTL-18866K and MS51527G military specifications, requiring full compliance with all dimensional, material, and performance standards outlined in these guidelines. The work includes precision machining, rigorous inspection protocols, and proper packaging and labeling in accordance with U.S. military requirements to ensure readiness for defense logistics use. All components must be produced to meet the exacting quality and traceability standards mandated for military-grade hardware. The contract is classified as a subcontract under the NAICS code 332613 for Other Fabricated Wire Product Manufacturing and is administered by the Defense Logistics Agency, a component of the Department of Defense. Although no solicitation number or specific place of performance is provided, the award is linked to the DIBBS system under contract number SPE7M126P8910, and the posting date indicates the award was made in July 2026. The fittings will support military infrastructure and systems requiring certified tubing connections, with the full scope of work encompassing end-to-end production from raw material processing to final delivery in compliance with federal defense procurement protocols.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

N/A
View Details
NAICS: 332613
New
DIBBS
Electrical Component Manufacturing and SupplyThe contract calls for the manufacture or supply of an electrical coil identified by NSN 5950-01-718-9999, requiring full compliance with military and federal specifications to ensure operational reliability and interoperability within defense systems. The work is classified as a subcontract under NAICS code 332613, which pertains to other electrical equipment and component manufacturing, and the performance location is designated as Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, with no set-aside provisions indicated, meaning all eligible vendors may respond without restriction based on small business or other classifications. The contracting activity is managed by the Land Supply Chain under the Department of Defense, and the contract is accessible via the DIBBS platform for detailed submission requirements and documentation.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
Precision Shaft ManufacturingThe contract seeks the manufacture and supply of a precision shoulder shaft identified by part number 719065-1 and National Stock Number 3040007863182, to meet strict military specifications. The work requires advanced CNC machining processes to ensure dimensional accuracy, surface finish, and structural integrity consistent with defense requirements. Comprehensive quality assurance protocols must be implemented throughout production, including inspection, testing, and documentation to verify compliance with all technical and performance standards. The supplier is responsible for adhering to approved packaging and marking procedures to ensure traceability, handling safety, and logistical readiness upon delivery. This is a subcontract opportunity under the NAICS code 332613, issued by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026. All work must be performed in accordance with federal defense contracting regulations, and the final product must be fully compliant with military logistics and supply chain standards. The contract does not specify a set-aside category or a designated place of performance, and no point of contact is listed, requiring potential bidders to review the full solicitation via the provided DIBBS link for complete instructions and requirements.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring ManufacturingThe contract requires the manufacture and delivery of 410 helical compression springs identified by NSN 5360-00-953-9554, fully compliant with applicable military specifications and environmental regulations. All springs must be produced to exact technical standards and delivered FOB origin within a strict 20-day window from the date of award. The solicitation is categorized as a subcontract under NAICS code 332613, indicating it falls within the forging and stamping industry sector, and is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, and the place of performance is not specified, implying production and shipment may originate from the contractor’s facility. All deliveries must adhere to DOD procurement protocols and be tracked through the designated DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract is for the procurement of 410 helical compression springs identified by NSN 5360-00-953-9554 and part number 49223, supplied by B E AEROSPACE INC. SERVICES DIV. The item must be delivered within 20 days FOB origin with no tolerance for quantity variance. All supplies must comply with stringent environmental restrictions, including a complete prohibition on ozone-depleting chemicals and the intentional use of mercury or mercury-containing compounds, except for specific functional applications authorized by NAVSEA, such as batteries, fluorescent lights, and certain instruments, which must meet additional containment and safety standards. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03 from August 2016, and all packaging must adhere to MIL-STD-2073-1E with specific handling, wrapping, and marking requirements in accordance with MIL-STD-129. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition scale. The delivery destination is a U.S. military facility in Geilenkirchen, Germany, with designated freight forwarding and marking instructions provided. The contract is part of a solicitation issued under SPE7L1-26-T-854B with a response deadline set for July 31, 2026, and the item falls under NAICS code 332613 for spring manufacturing.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRESThe contract specifies the procurement of a helical compression spring, part number 28296 from Eaton Corporation, with NSN 5360014229289, for a quantity of 52 units at a unit price of $52.00, totaling $2,704. Delivery is required within 84 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is designated as a critical application item, subject to stringent quality controls and zero-defect acceptance standards under MIL-STD-1916 or comparable zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must conform to ASTM D3951 and MIL-STD-129 labeling requirements, with palletization following DLA’s RP001 packaging guidelines, and all technical and quality requirements from the DLA Master List supersede any conflicting standards. The deliverable must be shipped to Industries of the Blind Inc in Greensboro, NC, with a required ship date of July 9, 2026, and an original delivery deadline of February 7, 2027. The solicitation was issued under contract SPE7M4-26-T-240J, categorized under NAICS code 332613, with Rory O’Reilly from the Department of Defense’s Fluid Handling Division as the point of contact.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract pertains to the procurement of three helical compression springs identified by NSN 5360-01-512-2004 and part number S11414, manufactured by Dante Valve Company. The items are classified as critical application components and must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The delivery schedule requires shipment within 72 days of contract issuance, with delivery FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed at three units with no tolerance for variance. The consignee is Industries of the Blind Inc in Greensboro, North Carolina, and the specified need date is June 9, 2026, though the original required delivery date was May 15, 2026. All documentation and sourcing approvals must meet RC001 requirements, and government identification must be removed from non-accepted supplies per RQ011. The solicitation number is SPE7L5-26-T-4320 with a response deadline of July 23, 2026, and the procurement is administered by the Department of Defense through Land Supplier Operations Engines.
LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract specifies the procurement of three helical compression springs made from ASTM 5673, Condition C, Type 17-7 PH stainless steel, with an inside diameter of 0.523 inches, a free length of 2.094 inches, and a deflection rate of 625 pounds per inch. The springs are rated for a load of 275 pounds and will measure 1.650 inches in length under full load, with squared and ground ends on both sides. They are designated as a critical application item, manufactured by Eaton Aerospace LLC under part number 29351, and identified by NSN 5360-01-034-8433. All items must be marked per MIL-STD-129, including the contract number, lot and serial numbers, contractor’s CAGE code, manufacturer’s code, and part number, and must comply with DLA packaging requirements RP001 and ASTM D3951, with packaging labeled according to the specified Unit of Issue and Quantity per Unit Pack. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. The springs must be delivered FOB origin within 168 days, with no quantity variance allowed, inspected and accepted at the destination, and shipped to Arizona Industries for the Blind in Phoenix, Arizona. The contract was issued under solicitation SPE7M4-26-T-243S with a response deadline of July 23, 2026, and the original delivery date set for April 5, 2027, with a required ship date of January 5, 2027. All technical and quality requirements referenced via R or I numbers take precedence and are governed by the DLA Master List as of the solicitation issue date.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract solicitation SPE7M1-26-U-4373 calls for the procurement of 124 helical compression springs identified by NSN 5360-00-798-7092 under an indefinite-delivery, indefinite-quantity contract with a guaranteed minimum of 18 units and a maximum value of $350,000. Delivery is required within 78 days after delivery order issuance, with shipment terms FOB origin. The item is subject to stringent quality and compliance standards, including ISO 9001:2015 certification for both manufacturers and non-manufacturers, and requires Cybersecurity Maturity Model Certification (CMMC) Level 2 accreditation for the offering organization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with zero non-conformances mandated in inspection samples unless otherwise specified, and acceptance criteria define AQL levels of 0.1 for critical, 1.0 for major, and 4.0 for minor attributes. Packaging and marking must conform to ASTM D3951 and MIL-STD-129, with Unit of Issue and National Stock Number clearly labeled; however, Item Unique Identification is not required per DFARS 252.211-7003. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048 and DLA’s Joint Certification Program for authorized access. The contractor must comply with hazardous materials labeling under 29 CFR 1910.1200, submitting hazard labels and safety data sheets for approval prior to award, and must adhere to cybersecurity safeguarding provisions including NIST SP 800-171 and FAR 52.240-93. Payment is processed through WAWF, and inspections occur at the destination point, conducted by the Government. The solicitation is open to small business concerns, including those eligible for HUBZone, WOSB, and SDVOSB preferences, with proposals due by July 23, 2026, via the DLA-BSM electronic portal.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract pertains to the procurement of 22 helical compression springs with NSN 5360-99-726-4764 and part number 2284W223 manufactured by Honeywell Aerospace Yeovil, classified as a critical application item. The contract is issued under solicitation SPE7L1-26-T-812H with a delivery requirement of 168 days from award, and the original required delivery date is April 27, 2027. The unit of issue is each, priced at $22.00 per unit, totaling $484.00. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which override other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization in accordance with specified guidelines. The springs must not contain intentionally added mercury or mercury compounds except for permitted uses in batteries, fluorescent lights, instruments, sensors, control systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The destination for delivery is Arizona Industries for the Blind in Phoenix, AZ, with transportation instructions governed by DLAD Proc Notes C19 and C20. The supplier must also comply with documentation requirements for source approval and government identification removal procedures, and the contract falls under the Covered Defense Information provisions.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract solicits 36 helical compression springs with part number 544951 and NSN 5360-00-919-6623 under solicitation SPE7L1-26-T-823D, issued by the Defense Logistics Agency for a total small business set-aside. The springs must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. The product must be heat-sealed in a barrier bag for cleanliness and preserved using Method 31, with packaging that minimizes plastic use without compromising protection. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. The supplier must also maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and adhere to all DLA packaging and transportation directives, including the specified freight shipping address to Industries of the Blind Inc in Greensboro, NC. Delivery is required within 168 days of award, with no variance in quantity allowed, inspection and acceptance occurring at destination, and the original delivery date set for February 20, 2027, though the need ship date is January 5, 2027. The unit price is $36.00 per unit, resulting in a total contract value of $1,296.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract pertains to the procurement of two helical compression springs identified by NSN 5360-00-839-6420 under solicitation SPE7L1-26-T-854T, with a required delivery within 94 days of award. The supplies are to be furnished to a performance location in Phoenix, Arizona, 85043, under the authority of the Department of Defense’s Land Supply Chain. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact surfaces, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and incorporate a secondary containment boundary as mandated by NAVSEA 5100-003D. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the primary point of contact is Kelly Day at the DLA, reachable via email or phone for inquiries.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) ServicesThe contract requires the execution of Product Verification Testing (PVT) to validate the performance and compliance of filter assemblies against the military specification MIL-S-901 and Procurement Note E05, ensuring these components meet stringent defense standards for reliability and durability under operational conditions. This work is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for businesses certified by the Small Business Administration, with the North American Industry Classification System code 541380 indicating engineering and technical services. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is issued by the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES. All testing activities are to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and interested parties must submit their responses through the DIBBS portal using the provided solicitation number SPE7L5026Q0157.
Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Marking (MIL-STD-129 & MIL-STD-2073-1E)The contract requires comprehensive military-compliant packaging, barcoding, and labeling of filter assemblies in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards for delivery to the Defense Logistics Agency. All work must adhere to federal military specifications for documentation, marking, and shipment readiness, ensuring full traceability and compliance throughout the supply chain. The performance location is designated as Tracy, California, with a ZIP code of 95304-5000, and the work is classified as a total small business set-aside under the SBA program, indicating exclusive eligibility for small businesses as defined by the Small Business Administration. The NAICS code 561910 indicates the nature of the work falls under Other Support Activities for Transportation, reflecting the logistical and packaging services required. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is structured as a subcontract opportunity managed by the Department of Defense under the Land Supplier Operations Engines organization. Bidders must be prepared to meet exacting military packaging and labeling requirements and must submit proposals via the DIBBS portal using the provided solicitation number SPE7L526Q0157.
Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CUI Protection (NIST SP 800-171)The contract requires the implementation and maintenance of robust cybersecurity controls to safeguard Covered Defense Information in full alignment with NIST SP 800-171 and DFARS 252.204-7012 requirements. This includes establishing, documenting, and continuously enforcing security measures across information systems to ensure the confidentiality, integrity, and availability of controlled unclassified information. Compliance must be maintained throughout the contract lifecycle with regular assessments, incident reporting, and remediation of identified vulnerabilities to meet federal defense standards. This is a small business set-aside subcontract under NAICS code 541512, exclusively available to small businesses as defined by the SBA. Performance is required at a designated location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with the contracting activity under the Department of Defense through LAND SUPPLIER OPNS ENGINES. All work must be executed in accordance with federal acquisition regulations and defense cybersecurity mandates, with no exceptions permitted for non-compliant practices or undocumented controls.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability Documentation & ComplianceThe contract requires full supply chain traceability for all components used in filter assembly, ensuring strict adherence to DFARS regulations and military documentation standards. The contractor must maintain detailed, auditable records that trace every part from origin through final assembly, guaranteeing compliance with defense procurement requirements and enabling full transparency across the supply chain. This includes accurate labeling, serialization, and documentation of material sources, manufacturing processes, and quality control data to meet military-grade integrity expectations. This is a total small business set-aside under NAICS code 541611, specifically designated for small businesses by the SBA, with performance based in Tracy, California, 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026. It is structured as a subcontract under the Department of Defense's Land Supplier Operations Engines organization, with all documentation and compliance activities expected to align with federal defense supply chain protocols. Failure to meet traceability requirements will result in non-compliance and potential contract failure.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Fluid Filter Assemblies (NSN 2910-01-422-7809)The contract calls for the full manufacturing and assembly of seven fluid filter units per military specifications, encompassing every phase from design and fabrication to testing and comprehensive documentation, all requiring formal approval from government engineering sources. Performance of the work is centered in Tracy, California, with the final deliverables expected to meet stringent defense standards under the NSN 2910-01-422-7809. The effort falls under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA to promote small business participation in federal procurement, and is classified under the NAICS code 332996 for other fabricated metal product manufacturing. The opportunity is issued by the Department of Defense under the organizational name Land Supplier Opns Engines, with a response deadline of July 27, 2026, and was posted on July 20, 2026. Although the solicitation number is not listed, the contract is structured as a subcontract and is accessible via the DIBBS platform. No point of contact is provided in the data, indicating that all inquiries must be directed through the official procurement portal. The absence of specified city, state, or country in the office address suggests that the administrative office may be centralized, but the physical production and delivery must be completed at the designated performance location in Tracy.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Assessment Support)The contract requires support for achieving CMMC Level 2 compliance through comprehensive documentation, system assessment, and coordinated efforts with a certified third-party assessment organization to secure formal certification. This includes developing and maintaining cybersecurity policies, procedures, and evidence-based records that align with the CMMC framework, identifying gaps in current controls, and implementing necessary remediation measures to meet mandatory requirements. The work will involve close collaboration with the assigned C3PAO throughout the assessment process to ensure accurate scoring and timely resolution of findings. The effort is scoped as a subcontract under the Department of Defense, with performance centered in New Cumberland, Pennsylvania, and tied to the NAICS code 541512 for computer systems design services. Proposals must be submitted by July 31, 2026, and the contract is issued by LAND SUPPLIER OPNS ENGINES. While specific point of contact information is not provided, all submissions and inquiries must be routed through the official DIBBS portal linked in the solicitation. The contract does not include a set-aside designation and is open to eligible subcontractors capable of delivering full-scope CMMC Level 2 compliance services.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging & Marking Compliance ServicesThe contract requires strict adherence to MIL-STD-2073-1E and DLA RP001 packaging standards to ensure all shipments are properly secured, protected, and prepared for military logistics. All items must be marked in accordance with MIL-STD-129, including the correct use of barcodes, labeling formats, and traceability information to support inventory control and distribution. The contractor is also responsible for the de-identification of rejected items, removing any sensitive or proprietary data before disposal or return to ensure compliance with security and privacy protocols. This work is part of a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS ENGINES, with performance required at the location in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under NAICS code 493190 for other warehousing and storage services.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Documentation SupportThe contract requires the preparation and submission of Material Safety Data Sheets and hazard labels in full compliance with OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement, ensuring all hazardous material documentation meets federal regulatory requirements. This includes the accurate classification, labeling, and dissemination of safety information for chemicals and materials used in defense-related operations, with a mandatory flow-down of compliance obligations to all subcontractors involved in the supply chain. Documentation must reflect current regulatory standards and be rigorously maintained to support safety and operational readiness across the defense logistics network. Performance is centered in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 541690, classifying it as other scientific and technical consulting services. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a short turnaround for qualified firms to submit proposals. The contract is structured as a subcontract under the Department of Defense’s Land Supplier Operations Engines organization, emphasizing the need for precision in documentation to meet military supply chain integrity standards. Proposals must demonstrate proven expertise in hazardous materials compliance and the ability to implement consistent, verifiable safety protocols across tiered vendor networks.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423830
New
DIBBS
Fuel Metering Pump Supply (Commercial Off-The-Shelf Item)The contract requires the supply of ten units of Fuel Metering Pumps identified by NSN 2910-01-688-5763, which are commercial off-the-shelf items meeting all specified technical requirements for performance, packaging, and labeling. Delivery must be completed within 156 days from the contract award date, with the place of performance located at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is structured as a subcontract under NAICS code 423830 and is managed by the Department of Defense through its Land Supplier Operations Engines organization. Responses are due by July 31, 2026, with the request posted on July 20, 2026, and all submissions must align fully with the technical and logistical parameters outlined in the solicitation.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity for Controlled Unclassified Information (CUI)The contract mandates the implementation of NIST SP 800-171 controls to protect Controlled Unclassified Information on contractor systems, requiring a comprehensive System Security Plan to be developed and maintained. It also obligates the contractor to comply with DFARS 252.204-7012, which includes timely reporting of cybersecurity incidents affecting CUI, ensuring continuous oversight and response capabilities. The work is governed under a subcontract arrangement with a NAICS code of 541512, indicating it pertains to computer systems design services, and performance is designated for New Cumberland, PA with a ZIP code of 17070-5002. All activities must align with Department of Defense requirements and be completed prior to the response deadline of July 31, 2026, following the posting date of July 20, 2026.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging & Palletization ServicesThe contract requires comprehensive packaging, labeling, and palletization services for spacer rings in strict compliance with DLA’s RP001 and MIL-STD-129 specifications. All items must be properly bar-coded, marked with their National Stock Number, and preserved according to established military standards to ensure longevity and readiness during storage and transport. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and must adhere to the defined regulatory frameworks governing military logistics and supply chain integrity. The solicitation is classified as a subcontract under the NAICS code 493190, and responses are due by July 31, 2026, with the opportunity posted on July 20, 2026. The performing entity must be prepared to meet exacting military requirements for documentation, identification, and physical handling of defense-related components.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling & ComplianceThe contract pertains to the identification, labeling, and documentation of hazardous materials involved in manufacturing or packaging operations, requiring full alignment with OSHA and DLA regulatory standards. This includes the timely preparation and submission of accurate hazard warning labels and Material Safety Data Sheets to ensure proper handling, storage, and transportation of dangerous substances. Compliance with federal safety protocols is mandatory, and all documentation must meet the specific formatting and content requirements set forth by these agencies. This subcontract opportunity is issued under NAICS code 541690 and is associated with the Department of Defense’s Land Supplier Operations Engines division. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. No set-aside designation is specified, and the contract is open to eligible subcontractors capable of fulfilling the hazardous materials compliance requirements. The official solicitation can be accessed via the provided DIBBS link for further procedural details.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details