Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPRING, HELICAL, TORSION

Active
SPE7LX-26-U-9889Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 21 helical torsion springs, identified by NSN 5360-01-365-1946 and part number MBEU147809 from Martin-Baker Aircraft Company Limited. The order is managed by the Department of Defense under solicitation SPE7LX-26-U-9889, with a delivery requirement of 92 days after the order is placed. Delivery is set as FOB Origin, while the inspection and acceptance points are designated at the destination. The items are classified as critical application items requiring critical item source inspection. Strict material constraints are in place, prohibiting the use of asbestos and the intentional addition of mercury or mercury-containing compounds. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. All technical and quality requirements are governed by the DLA Master List.

General Info

DoD procurement of 21 helical torsion springs from Martin-Baker, delivery within 92 days.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE7LX-26-U-9889.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,TORSION
SPRING,HELICAL,TORS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
CRITICAL APPLICATION ITEM
MARTIN-BAKER AIRCRAFT COMPANY LIMITED U1604 P/N MBEU147809
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000240009 0001 EA 21.000
This is an estimated quantity and may not be purchased by the IDC.
SPE7LX-26-U-9889
SECTION B
PR: 1000240009 PRLI: 0001 CONT’D
NSN/MATERIAL:5360013651946
DELIVERY (IN DAYS):0092
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9889 NSN/Part Number: 5360-01-365-1946 Quantity: 21 EA Purchase Request: 1000240009QTY: 21 Delivery: 92 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-379W
This solicitation, issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-379W, is for the procurement of five helical compression springs, identified by NSN 5360-00-167-5336. The contract requires delivery within 112 days after the order is received and is categorized under NAICS code 332613. Performance is designated for Phoenix, Arizona. The contract includes strict compliance requirements, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and quality standards. Notably, the item is subject to export control under ITAR or EAR regulations, meaning technical data cannot be shared with foreign persons without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, CONSTANT FOR
Solicitation # SPE7L1-26-T-06U3
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-06U3, is for the procurement of one constant force spring, identified by NSN 5360-00-534-9617. The contract requires delivery within 20 days after the order is placed and specifies a place of performance in Fort Worth, Texas. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from any non-accepted supplies. Interested parties must respond by September 14, 2026, and can coordinate with the primary point of contact, Robert Warne.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING
Solicitation # SPE7L1-26-T-06S1
This contract is for the procurement of 55 units of springs, identified by NSN 5360219203967 and part number 602001 from Jastram Engineering Ltd. The order is managed under solicitation SPE7L1-26-T-06S1 for the Department of Defense Land Supply Chain. Delivery is required within 126 days, with a required delivery date of December 7, 2026, and a need ship date of January 19, 2027. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a critical prohibition against the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Quality and technical requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORS
Solicitation # SPE7M0-26-T-6777
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of 20 helical torsion springs under NSN 5360-01-303-4917. The contract requires adherence to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the supplier must comply with regulations regarding the removal of government identification from any non-accepted supplies. The solicitation, identified by number SPE7M0-26-T-6777, has a response deadline of September 8, 2026. Delivery is required within 166 days after the order is received. The place of performance is located in Greensboro, North Carolina, and the primary point of contact for this acquisition is Shannon Irwin.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORS
Solicitation # SPE7L1-26-T-06T5
This solicitation from the Department of Defense Land Supply Chain is for the procurement of 54 helical torsion springs under part number 5360-01-676-4605. The contract requires delivery within 84 days after order and is categorized under NAICS code 332613. Performance is located in Phoenix, Arizona, and the primary point of contact is Robert Warne. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and CMMC Level 2 certification. Notably, the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-06T9
This contract is for the procurement of five helical compression springs, identified by NSN 5360-01-655-2017 and Boeing part number 114T2701-12. As a critical application item used on commercial certified aviation aircraft, the material must be new and unused, with surplus items strictly prohibited. The procurement requires FAA airworthiness approval and adherence to specific technical and quality requirements, including Item Unique Identification (IUID) per MIL-STD-130 and strict supply chain traceability documentation. The agreement specifies a delivery timeframe of seven days after the order, with a required delivery date of May 2, 2026. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, ensuring each unit is marked with the NSN, contract number, lot number, and relevant cage codes. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-06U4
This contract is a solicitation for the procurement of one helical compression spring, identified by NSN 5360-01-500-9291, under solicitation number SPE7L1-26-T-06U4. Issued by the Department of Defense Land Supply Chain, the requirement mandates a delivery timeline of five days after the order is placed. The procurement is subject to full and open competition and is managed by the primary point of contact, Derek Roberts. The agreement includes strict technical and quality mandates, incorporating DLA master lists and specific packaging requirements. Environmental restrictions are heavily emphasized, prohibiting the use of class I ozone depleting chemicals, asbestos, and the intentional addition of mercury or mercury containing compounds. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with a general requirement for zero non-conformances in sample lots. Additionally, the contract requires the removal of government identification from any non-accepted supplies and the protection of covered defense information.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L0-26-T-0448
This contract is for the procurement of nine helical compression springs, identified by NSN 5360-01-425-2997 and associated with Dover Corp part numbers 471808 and E-4577. The items are designated as critical application items and must adhere to strict material constraints, specifically prohibiting the intentional addition of mercury or mercury-containing compounds except in approved functional exceptions. The agreement is managed under solicitation number SPE7L0-26-T-0448 by the Department of Defense Land Supply Chain ESOC Buys. Delivery is required within 183 days, with a need ship date of March 17, 2027, and a final required delivery date of April 18, 2027. Shipping is FOB Origin, with the destination and inspection point set at Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates compliance with DLA packaging requirements RP001, marking standards MIL-STD-129, and packaging data MIL-STD-2073-1E.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-223F
This contract is for the procurement of one helical compression spring, identified by NSN 5360-01-688-6404 and part number MS24585C399. The item must be manufactured according to the current revision of the applicable military or non-government part standard, specifically referencing SAE AS13572. The procurement is subject to full and open competition and requires adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Delivery is required within five days of order, with the shipment destined for Fort Bragg, North Carolina. The contract specifies that the item must be shipped via the fastest traceable means, excluding parcel post, and requires strict adherence to DLA packaging and palletization requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORSION
Solicitation # SPE7L1-26-T-06K3
This contract is a solicitation for the procurement of three helical torsion springs under NSN 5360-01-172-9982. The order requires delivery within five days after receipt of the order. It is issued by the Department of Defense Land Supply Chain and is open for full and open competition. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards and specific sampling methods such as MIL-STD-1916 or ASQ H1331. There are stringent material prohibitions against the use of Class I ozone depleting chemicals, asbestos, and the intentional addition of mercury or mercury containing compounds. All items must comply with covered defense information regulations and the removal of government identification from non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-U-3949
This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 238 retaining rings under NSN 5325012022587. The requirement is designated as a critical application item, necessitating critical item source inspection and adherence to TDP Rev A Gen 1. The solicitation is set aside for total small businesses under NAICS code 332613. Delivery is required within 81 days after receipt of order with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The supplier must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129. Key approved part numbers include 14-00-139-033 from Auburn Gear Inc and Eaton Corp, as well as corresponding parts from Oshkosh Defense and Grove U.S. LLC.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L1-26-T-06N5
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332722
New
DIBBS
CAP, PROTECTIVE, DUST AN
Solicitation # SPE7LX-26-U-9903
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 361 protective dust and moisture seal caps under NSN 5340-01-579-6248. The contract is designated as a total small business set-aside under NAICS code 332722. Delivery is required within 116 days after receipt of order. The agreement mandates compliance with specific technical and quality standards, including DLA packaging requirements and MIL-STD-130N for the identification marking of U.S. military property. It also specifies the removal of government identification from any supplies that are not accepted. The solicitation was posted on September 2, 2026, with a response deadline of September 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, DIESEL ENGIN
Solicitation # SPE7LX-26-U-9420
This Request for Quotations, issued by DLA Land and Maritime under solicitation number SPE7LX-26-U-9420, is for an Indefinite Delivery Contract (IDC) to procure diesel engine parts kits specifically for Geislinger couplings. The procurement involves an estimated quantity of 6 kits under National Stock Number 2815-01-547-7099, with a maximum contract value of $350,000. This is a one-year contract below the Simplified Acquisition Threshold, where the quantity provided is an estimate and does not constitute a firm commitment. Delivery is required within 88 days on an FOB Origin basis, with both inspection and acceptance occurring at the destination. The contract incorporates rigorous technical, quality, and packaging standards, including compliance with MIL-STD-2073-1E for kit packaging and MIL-STD-129 for marking. Contractors must adhere to strict domestic sourcing requirements, such as the Buy American Act and the Berry Amendment, and are required to disclose the use of any non-domestic materials. Additionally, the solicitation mandates compliance with cybersecurity protocols for safeguarding covered defense information and requires proper labeling of hazardous materials in accordance with the Hazard Communication Standard. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332311
New
DIBBS
JACK, TRANSPORTABLE
Solicitation # SPE7LX-26-U-9624
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7LX-26-U-9624 for the procurement of 12 transportable jacks. The items are identified by NSN/Part Number 2540-01-558-8128 and are associated with purchase request 1000240015. This federal solicitation was posted on August 18, 2026, with a response deadline set for September 2, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9909
This contract, identified as SPE7LX-26-U-9909, is a solicitation by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 20 units of loop clamps. The items are identified by NSN 5340-01-481-8178 and part number 23-12231-004 from Daimler Truck North America LLC. This is a total small business set-aside under NAICS code 332510, with a delivery requirement of 116 days after order. The agreement specifies that delivery is FOB Origin, while both inspection and acceptance will occur at the destination. Packaging must adhere to DLA packaging requirements and MIL-STD-129 for marking and labeling, with specific instructions to follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. All technical and quality requirements are governed by the DLA Master List.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9621
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate under solicitation number SPE7LX-26-U-9621, seeks quotations for O-rings identified by NSN 5331-01-728-5808. The requirement is for an estimated annual quantity of 195 units, with a guaranteed minimum of 29 units and a minimum order quantity of 48 units. The contract is structured as a one-year indefinite delivery/indefinite quantity agreement with a maximum value of 350,000 dollars and a delivery timeline of 95 days after receipt of order. This opportunity is designated as a total small business set-aside under NAICS code 333618. The contract is subject to stringent technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. It mandates compliance with Cybersecurity Maturity Model Certification Level 2 and specifies that covered defense information applies. Furthermore, the technical data is subject to export controls under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
DIBBS
NOZZLE, STARTER FUEL
Solicitation # SPE7LX-26-U-9592
This contract solicitation, identified as SPE7LX-26-U-9592, is issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of starter fuel nozzles used on CH-47 Chinook helicopters. The requirement is for an estimated quantity of 55 units under NSN 2910009192022, with approved part numbers including Collins Engine Nozzles Inc 970-2 and RTX Corporation 915914C1. This is a total small business set-aside under NAICS code 336412, and the solicitation may result in a one-year indefinite delivery contract below the simplified acquisition threshold. Key delivery and quality terms specify a delivery window of 74 days after order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination. The items are designated as critical application items and must adhere to strict technical and quality requirements, including DLA packaging requirements and MIL-STD-129 labeling. Packaging must comply with ASTM D3951, though DLA Master List requirements take precedence. The solicitation was posted on August 18, 2026, with a response deadline of September 2, 2026.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7LX-26-U-9888
This contract, identified as solicitation SPE7LX-26-U-9888, is for the procurement of 149 units of a critical application item, part number 060005426 from Saint-Gobain Performance Plastics, under NSN 5330014078189. The delivery is required within 97 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-130N for identification marking and a total prohibition of asbestos. Specific packaging instructions require the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. All palletization and marking must comply with DLA packaging requirements and MIL-STD-129, while hazardous materials must follow IP025 guidelines.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9886
This solicitation is for the procurement of 245 units of plain encased seals, identified by NSN 5330-01-170-2933. The contract is issued by the Department of Defense under the Strategic Acquisition Program Directorate with a delivery requirement of 74 days after receipt of order. The item is classified as a commercial product and must adhere to MIL-STD-130N for identification marking of U.S. military property. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards and the removal of government identification from non-accepted supplies. Suppliers must be approved sources according to the current source control drawing or obtain OEM approval. Additionally, the contract strictly prohibits the intentional addition of mercury or the use of asbestos in the supplied hardware, requiring adherence to NAVSEA 5100-003D guidelines.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326291
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9894
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 247 plain encased seals under NSN 5330-01-312-4792. The contract requires delivery within 98 days after the order is placed. All supplied items must be free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. Compliance requirements include adherence to CMMC Level 2 certification for third-party assessment and the protection of covered defense information. The supplier must follow DLA packaging requirements, MIL-STD-130N for identification marking of military property, and ensure the removal of government identification from any non-accepted supplies. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements.
Rubber Product Manufacturing for Mechanical Use

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7LX-26-U-9596
Contract SPE7LX-26-U-9596 is a solicitation issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of battery chargers, specifically Panasonic Industrial Co part number FZ-VCBG21M, identified by NSN 6130-01-708-6325. The requirement is for an estimated quantity of 196 units, with a delivery timeframe of 127 days and shipping terms set as FOB Origin. This is a commercial off the shelf item procurement with inspection and acceptance occurring at the destination. The contract adheres to strict quality and packaging standards, incorporating DLA packaging requirements RP001 and marking standards per MIL-STD-129. Sampling methods must comply with MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Technical and quality requirements are governed by the DLA Master List, and the procurement is managed under a unilateral indefinite quantity and indefinite delivery structure.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9887
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 515 gaskets under part number 5330-01-140-2817. The contract requires delivery within 99 days after the order is placed. Technical and quality standards are governed by the DLA Master List, with specific adherence to packaging requirements and the removal of government identification from non-accepted supplies. The contract mandates strict environmental and material compliance, prohibiting the use of Class I ozone-depleting chemicals, asbestos, and the intentional addition of mercury or mercury-containing compounds, except where functionally required. Additionally, because the items are subject to deterioration from ultraviolet rays, they must be sealed in medium duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117 standards.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9891
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 41 plain encased seals under part number 5330-01-161-4070. The contract requires delivery within 139 days after receipt of order and adheres to specific DLA packaging and identification marking standards, including MIL-STD-130N. Contractors must comply with strict environmental mandates prohibiting the use of Class I ozone depleting chemicals and must follow the technical and quality requirements outlined in the DLA master list. Security and compliance are critical components of this agreement, requiring CMMC Level 2 certification and adherence to regulations regarding covered defense information. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. The solicitation is listed under NAICS code 339991 with a response deadline of September 17, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details