Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPRING, HELICAL, TORSION

Active
SPE7LX-26-U-9196Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 37 helical torsion springs with NSN 5360-01-371-0694 under solicitation SPE7LX-26-U-9196, issued as a Total Small Business Set-Aside with a NAICS code of 332613. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and delivery is required within 141 days after award. All items must comply with the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which govern technical, quality, and packaging standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Asbestos is banned from all supplied items, and any alternative materials must undergo formal approval under Clause L30 and Provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as specified. Unrestricted technical data is available, and the manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916. The point of contact for inquiries is Theodore Misiolek, and performance is under the U.S. Department of Defense's Strategic Acquisition Program Directorate.

General Info

37 helical torsion springs, small business set-aside, delivery in 141 days, strict compliance with DLA and MIL-STD-1916, no asbestos or ozone-depleting chemicals.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7LX-26-U-9196.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,TORSION
SPRING, HELICAL, TORSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
AN UNRESTRICTED TECHNICAL DATA PACKAGE IS AVAILABLE FOR THIS NSN.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5360-01-371-0694 Quantity: 37 EA Purchase Request: 1000238771QTY: 37 Delivery: 141 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
Helical Compression Spring ManufacturingThe contract calls for the manufacture of six helical compression springs in strict compliance with military specifications, encompassing all phases of production from material sourcing and heat treatment to final finishing and rigorous testing. Each spring must meet defined technical and performance criteria, and all work requires prior approval from the government engineering source to ensure conformance with applicable standards. The effort is classified as a subcontract under a Total Small Business Set-Aside, restricted to small businesses as defined by the SBA, and falls under NAICS code 332613 for spring manufacturing. The place of performance is designated as Phoenix, Arizona, with a zip code of 85043, and the contracting activity is managed by the Fluid Handling Division under the Department of Defense. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-909B
The contract calls for the procurement of 30 helical compression springs with the NSN 5360-01-476-3905 under solicitation SPE7L1-26-T-909B, with a deadline for response on August 14, 2026, and delivery required within 78 days after order. The item falls under NAICS code 332613 and is being procured by the Department of Defense through the Land Supply Chain organization, with performance location in Greensboro, North Carolina, 27409. The contracting officer is Kelly Day, reachable via email and phone provided. This procurement is subject to strict cybersecurity and export control requirements, including compliance with the Cybersecurity Maturity Model Certification Level 2 as a certified third-party assessment organization, adherence to DLA packaging standards, and the mandatory removal of government identification from non-accepted supplies. Technical data associated with this item is classified under export control regulations, either ITAR or EAR, and its disclosure to foreign persons—including foreign nationals employed by U.S. companies—is strictly prohibited without prior authorization from the Department of State or Department of Commerce. Access to this controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved DLA authorization. Covered defense information requirements are in effect, and the applicable revision of the DLA Master List of Technical and Quality Requirements controls based on the solicitation issue date.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-909K
The contract specifies the procurement of 27 helical compression springs with NSN 5360-01-130-0921 and part number 2654082, supplied by Honeywell International Inc and Boeing Distribution Services X, Inc. The springs are classified as a critical application item and must meet all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and attributes must be verified at levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is not subject to Item Unique Identification per customer request. Packaging must adhere to ASTM D3951 in conjunction with MIL-STD-129 labeling and DLA Packaging Requirements RP001, with palletization in compliance with specified guidelines. Delivery is FOB origin with no tolerance for quantity variance, and the inspection and acceptance points are both at destination. The required delivery date is 10/01/2026 with a 50-day lead time, and the unit of issue is each. The delivery address is Industries of the Blind Inc in Greensboro, NC, and transportation compliance follows DLAD Proc Notes C19 and C20. The contract was solicited under SPE7L1-26-T-909K with a response deadline of 8/14/2026 and a posted date of 8/3/2026.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-860X
This contract solicits three helical compression springs identified by NSN 5360015122004 and part number S11414, manufactured by Dante Valve Company, with a unit price of $3.00 per item and a total contract value of $9.00. The springs are classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take absolute precedence over any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement, with all materials prepared in accordance with the specified Unit of Issue and Quantity per Unit Pack. The delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The delivery is required within 91 days, with an original required delivery date of November 11, 2026, and a need ship date of November 3, 2026. All shipments must be sent to Arizona Industries for the Blind at the designated parcel post and freight shipping address in Phoenix, Arizona. Transportation procedures must follow DLAD Procurement Notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-860X, falls under NAICS code 332613, and is managed by the Department of Defense’s Land Supply Chain. The point of contact for inquiries is Kelly Day, with contact details provided. The contract’s technical and quality requirements are bound by the version of the DLA Master List in effect on the solicitation issue date, and non-conforming supplies must have government identification removed before return.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-298F
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the Berry Amendment threshold lowered to $150,000, requiring full disclosure of any non-domestic materials and adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. The solicitation prohibits the use of covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016, and excludes additive manufactured parts unless prior approval is obtained. Small business joint ventures must submit required representations for eligibility under designated small business categories. Due to fluctuating demand, offerors are strongly encouraged to quote quantity ranges to enable efficient award decisions without resolicitation, though this flexibility does not apply to Auto IDC. All vendors must register through DLA’s new AMPS system to access the Vendor Shipment Module and continue shipping, with WebServices users required to update their schema by the specified deadline. Offers submitted after the closing date must include a “No Bid” submission on DIBBS with an anticipated quote date or reason for non-submission to avoid administrative delays. The solicitation is a total small business set-aside under NAICS 332613 for 6 helical compression springs with an ADO of 143 days. Compliance with all representations, certifications, and procedural notices is mandatory for award eligibility.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7LX-26-U-9178
The contract pertains to the procurement of 19 helical compression springs identified by NSN 5360-01-250-2055 under solicitation SPE7LX-26-U-9178, with a delivery requirement of 128 days after award. The solicitation is a total small business set-aside as defined by FAR 19.5, targeting suppliers classified under NAICS code 332613, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Compliance with DLA Packaging Requirements for Procurement is mandated, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for designated functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof and feature a secondary containment barrier per NAVSEA 5100-003D. All non-accepted supplies must have government identification removed prior to return. The point of contact for inquiries is Theodore Misiolek, reachable via email and phone, with the solicitation open for response until August 18, 2026, and publicly accessible through the DIBBS portal.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-908Y
The contract pertains to the procurement of six helical compression springs with part number 04750200G375 and NSN 5360-00-837-5420, under solicitation SPE7L1-26-T-908Y, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 94 days of award, and responses must be submitted by August 14, 2026. The technical and quality standards governing this procurement are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific exemptions such as batteries, fluorescent lights, sensors, weapon systems, and chemical reagents designated by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier as mandated by NAVSEA 5100-003D. Additionally, government identification must be removed from non-accepted supplies. The point of contact for inquiries is Kelly Day, reachable via email and phone, with performance occurring in Greensboro, North Carolina, 27409.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7MC-26-T-008R
The contract pertains to a single helical compression spring identified by NSN 5360-01-372-5633, with a delivery requirement of 160 days after award. It is issued under solicitation SPE7MC-26-T-008R by the Defense Logistics Agency, with the NAICS code 332613 for other spring manufacturing. All technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the spring or any component in direct contact with it, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all provisions are binding as specified in the referenced DLA compliance documents. The solicitation closed on August 6, 2026, with deliveries required to Greensboro, NC, and the primary point of contact is Nicole Betts, reachable through the provided email and phone number.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-908P
This contract pertains to the procurement of 119 helical compression springs identified by part number 1A527-0116 and NSN 5360-99-729-7406, with packaging requiring ten springs per unit. The supplier is IPECO EUROPE located in Southend-on-Sea, United Kingdom, and the springs must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, as applicable based on the solicitation or award date. The contract is governed under DLA Packaging Requirements for Procurement and includes specific guidelines for the removal of government identification from non-accepted supplies. The solicitation number is SPE7L1-26-T-908P, issued on August 3, 2026, with responses due by August 14, 2026, under a North American Industry Classification System code of 332613. Delivery is required within 24 days of award to Greensboro, North Carolina, 27409, with Kelly Day of the Department of Defense’s Land Supply Chain listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-907R
This contract pertains to the procurement of a single helical compression spring identified by NSN 5360-01-681-9697, with a delivery requirement of 20 days after award. The solicitation, numbered SPE7L1-26-T-907R, was posted on August 3, 2026, and responses are due by August 14, 2026, under the NAICS code 332613 for spring manufacturing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must comply with DLA packaging requirements, must not contain any class I ozone-depleting chemicals or asbestos, and any substitution of restricted materials requires prior approval. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Notes C03 from August 2016. Government identification must be removed from non-accepted supplies, and the place of performance is specified as Mechanicsburg, Pennsylvania, 17050-2411. The primary point of contact for the Department of Defense’s Land Supply Chain is Derek Roberts, reachable via email and phone.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT, SPECIAL
Solicitation # SPE7L1-26-T-909W
This contract pertains to the procurement of three flat springs, designated by part number 095.06.0008 and NSN 5360-12-346-3319, under solicitation SPE7L1-26-T-909W. The requirement is for delivery within 80 days from the award date, with goods to be shipped FOB origin and inspected and accepted at the destination. The quantity is fixed at three units with zero variance allowed, and packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging and palletization conform to DLA’s official procurement standards, and hazardous materials procedures apply if relevant. The delivery destination is Industries of the Blind Inc. in Greensboro, NC, and transportation logistics are governed by DLAD procedural notes C19 and C20. The contract incorporates technical and quality requirements referenced via R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation issue date. The supplier, Vincorion LLC or Vincorion Power Systems GmbH, must comply with all specifications outlined in the contract, including the unit of issue alignment with ANSI X12 standards and adherence to Defense Information handling standards where applicable. The contract was issued under a federal acquisition framework with NAICS code 332613 and managed by the Department of Defense’s Land Supply Chain. The point of contact is Kelly Day, and the original required delivery date was October 22, 2026, with a needed ship date of November 3, 2026, indicating a buffer period prior to final delivery.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7MC-26-T-7536
The contract calls for the procurement of two units of a helical compression spring, identified by NSN 5360013725633. The delivery location is Industries of the Blind Inc., with a delivery timeline of 147 days after order. Approved sources for the item include specific part numbers, ensuring the procurement meets certain quality or specification standards. The solicitation is issued as a Request for Quote (RFQ), and all responsible vendors are encouraged to submit quotes electronically by the deadline of April 13, 2026. Hard copies of the solicitation, as well as any associated specifications or drawings, are not provided, and all relevant information and submission must occur through the electronic platform specified. Administered by the Defense Logistics Agency Land and Maritime, under the Department of Defense, this procurement relates to NAICS code 332613, covering spring manufacturing. The contracting office is located in Columbus, Ohio, and questions about the solicitation are to be directed via email to the buyer listed in the solicitation document. The procurement is open and non-restrictive in terms of vendor set-asides, emphasizing a competitive process through electronic submissions via the designated online portal.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332999
New
DIBBS
Supply of Resilient Mounts (General Purpose)The contract calls for the procurement and delivery of 69 units of general-purpose resilient mounts identified by NSN 5340014793383, all of which must comply with established military standards for performance, durability, and quality. Deliveries are required to include proper packaging, labeling, and shipping in full alignment with Department of Defense regulations to ensure readiness and traceability throughout the supply chain. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under other fabricated metal product manufacturing. The opportunity was posted on August 3, 2026, with responses due by August 18, 2026, and is administered by the Strategic Acquisition Program Directorate under the Department of Defense. Performance location and specific delivery details are not specified in the provided data, but all work must meet DoD logistical and compliance requirements. The contract can be accessed via the DIBBS platform for further details and submission.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336320
New
DIBBS
Supply of Radiator Parts Kit (NSN 1000238707)The contract requires the manufacture, quality assurance, packaging, and annual delivery of 18 units of a commercial radiator parts kit identified by NSN 1000238707 and part number 3S0146190000 to a U.S. government logistics depot. All work must adhere to strict military standards including DLA packaging guidelines, MIL-STD-129 labeling requirements, and federal hazard communication protocols to ensure safe handling and proper identification throughout the supply chain. The contract is structured as a small business set-aside under SBA regulations, exclusively available to small businesses certified under the SBA’s size standards, with the NAICS code 336320 designating it within the automotive parts manufacturing sector. Deliveries are anticipated to occur on a steady annual schedule beginning after contract award, with full compliance mandatory for acceptance and payment. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. The contract type is a subcontract, indicating it may be issued by a prime contractor or through a broader procurement framework under the DLA. Performance location details are not specified but are assumed to align with standard defense logistics operations. The contract is accessible via the DIBBS portal and is subject to all applicable federal acquisition regulations, with particular emphasis on small business participation goals and defense supply chain integrity.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: NA
New
DIBBS
No subcontract opportunities identifiedNo subcontract opportunities have been identified under this solicitation, which was posted on August 3, 2026, with a response deadline of August 18, 2026. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, intended exclusively for small businesses, though the NAICS code is not provided and no specific details about the work scope, location, or point of contact are available. The action is managed by the Strategic Acquisition Program Directorate within the Department of Defense, but no office address or place of performance has been specified. Interested parties can access additional information through the provided DIBBS link, though no subcontractor or supplier opportunities are currently discernible.

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811212
New
DIBBS
Quality Inspection & Destination Acceptance SupportThis contract seeks a small business subcontractor to provide post-shipment quality assurance services focused on ensuring product compliance and facilitating destination acceptance for deliveries under the Department of Defense’s Strategic Acquisition Program Directorate. The scope includes performing quality inspections after shipment, managing corrective actions for any rejected deliveries, and providing comprehensive documentation support to assist with inspections at the final destination. The requirement is set aside exclusively for total small businesses under the SBA’s Small Business Set-Aside program, classified under NAICS code 811212, indicating a focus on repair and maintenance services. Proposals must be submitted by August 18, 2026, following the posting date of August 3, 2026, with all work expected to support defense logistics operations and uphold strict quality standards for delivered items.
Computer and Office Machine Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 484220
New
DIBBS
Transportation & Freight Logistics (CONUS)The contract facilitates cost-effective freight transportation of packaged filter elements across contiguous U.S. destinations under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s facility. The work falls under NAICS code 484220, designating it as a freight trucking service, and is structured as a subcontract with a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. All performance will occur within the contiguous United States, and no specific point of contact or detailed delivery locations are provided in the data. Interested parties must submit proposals through the DIBBS platform prior to the deadline to compete for this award.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive authoring, submission, and ongoing maintenance of Safety Data Sheets for hazardous components used in filter elements, ensuring full compliance with OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This work involves accurately identifying chemical hazards, structuring SDS documentation according to mandated global harmonization formats, and ensuring timely updates when formulations or regulatory requirements change. The contractor must maintain strict adherence to federal safety communication protocols and deliver properly formatted, legally compliant SDS documents for all relevant hazardous constituents within the filter manufacturing supply chain. This subcontract is identified under NAICS code 541690 and is set aside exclusively for small businesses as defined by the Small Business Administration, indicating a focus on supporting small business participation in defense-related compliance services. The solicitation was posted by the Strategic Acquisition Program Directorate within the Department of Defense, with a firm response deadline of August 18, 2026. All work is to be performed in support of federal hazardous materials safety standards, and while the physical location of performance is unspecified, the deliverables must meet the regulatory expectations of U.S. occupational safety authorities. The contract emphasizes precision, regulatory awareness, and sustained quality control in SDS lifecycle management.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Kitting ServicesThe contract awards subcontracting services for the military-standard packaging, labeling, and kitting of filter elements in full compliance with Defense Logistics Agency requirements, specifically for FOB Origin shipment within the Continental United States. All work must adhere to stringent DLA specifications for handling, preparation, and documentation to ensure operational readiness and logistical efficiency. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, restricting eligibility exclusively to small businesses certified by the Small Business Administration. The NAICS code 561910 categorizes the service under Other Support Activities for Transportation, reflecting the specialized nature of the packaging and logistics support required. The contract opportunity was posted on August 3, 2026, with a response deadline of August 18, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Performance will occur within the Continental United States under FOB Origin terms, meaning the contractor is responsible for all packaging and preparation tasks before shipment commences from the origin point. No specific delivery location or point of contact is provided, and all parties must refer to the official DIBBS portal for full technical and administrative requirements. The submission window is limited, and failure to meet deadlines or compliance standards may result in disqualification.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Fluid Filter ElementsThe contract is for the manufacturing of fluid filter elements with part number 4268224 and NSN 2940-01-670-6510, requiring full compliance with military specifications throughout all phases including material sourcing, fabrication, testing, and packaging. The work must be performed by a small business under a Total Small Business Set-Aside, as defined by FAR 19.5, with the NAICS code 332996 indicating classification under Other Miscellaneous Fabricated Metal Product Manufacturing. All production activities must adhere to the stringent quality and performance standards mandated by the Department of Defense, with the Strategic Acquisition Program Directorate overseeing the requirement. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and is structured as a subcontract opportunity. The place of performance and exact location details are unspecified, but the work is expected to support defense logistics and readiness across the military’s fluid system requirements. The contract will be managed through the DIBBS system, accessible via the provided link, and all submissions must meet the technical and commercial criteria established in the request, ensuring full traceability and certification of materials and processes to satisfy military-grade reliability.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 484121
New
DIBBS
Domestic Freight and Delivery LogisticsThe contract entails the domestic transportation and delivery of packaged military seals to specified U.S. government locations within the continental United States under FOB Destination terms, meaning the vendor assumes responsibility for all shipping costs and risks until the goods reach the final destination. This is a subcontract classified as a Total Small Business Set-Aside under the Small Business Administration guidelines, exclusively available to small businesses as defined by the NAICS code 484121, which corresponds to general freight trucking. The solicitation is issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a response deadline of August 18, 2026, and was posted on August 3, 2026. Performance is required across the continental U.S., with no specific location designated, indicating flexibility in delivery destinations as directed by the government. The contract does not include detailed payment terms or quantities within the provided data, but compliance with federal transportation regulations and timely delivery are paramount.
General Freight Trucking, Long-Distance, Truckload

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 323120
New
DIBBS
Specialty Packaging and Labeling ServicesThe contract requires specialized packaging, labeling, and military-standard identification marking services for sealed components, with full compliance to MIL-STD-130N for asset tracking and durability under operational conditions. All labeling must adhere to DFARS and DLA regulations for hazardous materials, ensuring proper handling, storage, and transportation safety in defense supply chains. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 323120 indicating printing and related support activities. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and is issued by the Strategic Acquisition Program Directorate under the Department of Defense. Performance location details are not specified, but the requirement implies nationwide support consistent with military logistics networks.
Support Activities for Printing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
Supply of Sealed Plain Encased ComponentsThe contract solicits the manufacture or sourcing of 2,907 units of SEAL, PLAIN ENCASED with the National Stock Number 5330-01-481-0888, requiring full compliance with military packaging standards, hazardous materials regulations, and proper marking protocols for delivery throughout the continental United States. The effort is structured as a subcontract under a Total Small Business Set-Aside classification, ensuring eligibility and participation exclusively by small businesses as defined by the SBA, with the NAICS code 339991 confirming the classification under Other Miscellaneous Manufacturing. All work must meet strict Defense Department specifications for quality, handling, and documentation. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and is issued by the Strategic Acquisitions Program Directorate under the Department of Defense. While no specific point of contact or physical delivery location is provided, performance is restricted to CONUS and must adhere to all logistical and regulatory requirements associated with federal military supply chains. The contract opportunity is accessible via the DIBBS platform, and bidders must ensure alignment with federal acquisition regulations, including packaging, labeling, and hazardous material handling protocols, to be considered for award.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Loop Clamp Supply (Hardware Manufacturing)The contract entails the manufacture and supply of loop clamps identified by NSN 5340014799054 and part number 2290HX, produced to meet exacting military specifications. The items must be fully compliant with government packaging and delivery standards to ensure readiness for military logistics and deployment. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses certified by the Small Business Administration. The North American Industry Classification System code is 332312, indicating the work falls under the forging and stamping industry sector. The solicitation is administered by the Strategic Acq Program Directorate under the Department of Defense, with a response deadline of August 18, 2026, and was posted on August 3, 2026. All deliverables must be fulfilled in accordance with the requirements specified by the contracting office, with performance expected to align with defense supply chain protocols.
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details