Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRRA1-26-R-0066/ MANIFOLD HYDRAULICS

Active
SPRRA1-26-R-0066Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The government is seeking offers for a five-year Indefinite Delivery Requirements contract to procure hydraulic manifolds, specifically NSN 4730013261804 with part number 7-211810013-7, designed for use on the Apache helicopter. The minimum intended quantity is 35 units, with a production lead time of 904 days after contract award if first article testing is required, or 603 days without it. Deliveries must be directed to Tracy, California, 95304-5000. This item is exclusively restricted to Parker-Hannifin Corporation, CAGE code 59211, as the government does not own the data rights necessary to qualify additional suppliers, and reverse engineering is deemed uneconomical. All potential offerors must meet prequalification criteria to be eligible for award, and interested firms are encouraged to pursue source approval through the AvMC public website to be considered for future opportunities. Communication regarding the solicitation must be made solely via email to Jessica Coleman at jessica.coleman@dla.mil, with no telephone inquiries accepted. Foreign firms must route all requests through their respective embassies. The solicitation, assigned NAICS code 332919 and cataloged as SPRRA1-26-R-0066, is open to all responsible sources but will not close before the stated deadline of July 15, 2026, subject to potential adjustment based on release timing.

General Info

DLA seeks qualified manufacturers for Apache hydraulic manifold; stringent prequalification required, no solicitation yet.

Agency

Department Of Defense → Al DLA Aviation At HuntsvilleView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Tracy, CA, 95304, USA

Set-Aside

NONE

Documents

(1)

SPRRA126R0066+Letter+of+Solicitation.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Al DLA Aviation At Huntsville
Contacts2 people available
OfficeREDSTONE ARSENAL, AL, 35898-7340, USA
Organization / Agency
Department Of Defense → Al DLA Aviation At Huntsville
View Agency Profile
Office AddressREDSTONE ARSENAL, AL, 35898-7340, USA
Contacts
Jessica Coleman
contact@example.gov
+1 (555) 000-0000
Scott Wilhite
contact@example.gov

Full Description

Show more

See attached 

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
COLLAR, RECEPTION COThe contract pertains to the procurement of a single slider block, split, for a fuel line with NSN 1680-00-064-0295, with a delivery requirement of 219 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation issue date or award date depending on the acquisition size. Inspections and acceptance must occur at the supplier’s origin, and any non-accepted supplies must have government identification removed prior to return. Item Unique Identification is not required as specified by the service customer, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. The solicitation number is SPE4A7-26-Q-0844, with a response deadline of July 29, 2026, and the contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Brian Kurtz as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
Federal
SPRMM1-26-Q-GB18-GATE, VALVE, 10 IN.The solicitation SPRMM1-26-Q-GB18 seeks three units of a 10-inch gate valve with NSN 4820-01-700-0383, manufactured to specifications outlined in design documentation 75774, P4-32689-G01, and 9439-870, with a TDP version of 001 and a shelf life of 0-00. The item must be physically identified per MIL-STD-130 Rev N and comply with all applicable government quality and inspection standards, including FAR 52.246-2 and 52.246-3, with inspections and acceptance conducted at the contractor’s or subcontractor’s plant. The contractor is required to implement NIST SP 800-171 security controls and adhere to DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, with deviation 2024-00013, Revision 1, in effect. Packaging and marking must follow MIL-STD-2073-1 for overseas and stock shipments, ASTM D3951-18 for CONUS immediate-use shipments, and MIL-STD-129 for all labeling, including mandatory inclusion of PIID, CLIN, and SubCLIN for spares, with DLR labeling required for items with specific Cognizance Codes. Palletization must conform to MIL-STD-147 and ANSI MH1-2016, and all wood packaging must comply with ISPM 15 and bear the ALSC mark. Hazardous materials must be labeled under 29 CFR 1910.1200 and packaged per 49 CFR Performance Oriented Packaging standards. Delivery is FOB destination to the DDSP New Cumberland Facility in New Cumberland, PA, with no specified delivery date other than ASAP, and electronic invoicing via WAWF is required under DFARS 252.232-7003. The solicitation is automated, uses NAICS code 332919 with a small business size standard of 750 employees, and requires SAM registration and certification compliance including representations on foreign ownership, trade agreements, Buy American, cybersecurity, and whistleblower rights. Offers must include OEM details if not the
SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332919
New
Federal
SPRMM1-26-Q-GB23-GATE, VALVE, 10 IN.The solicitation SPRMM1-26-Q-GB23 seeks three units of a 10-inch gate valve identified by NSN 7HH 4820-01-700-0374, manufactured in accordance with specification P4-32689-G01 and referenced drawing 9439-869 under Cage Code 75774. The item is classified under NAICS code 332919 and is issued by the Department of Defense through SPRMM1 DLA Mechanicsburg in Pennsylvania, with a response deadline of July 24, 2026. The contract requires strict adherence to military packaging and marking standards, including MIL-STD-2073-1 for preservation, MIL-STD-129 for labeling, and specific requirements for DLR items with yellow DLR text on blue backgrounds. Packaging levels vary by shipment type: Level B for domestic and air shipments, and Level A for surface shipments overseas. The valve must be delivered ASAP to two designated locations, two units to W25GIU and one to W62GT, with FOB terms as “other” per the schedule. All shipments must include full supply chain traceability documentation including CAGE code, NSN, lot or date codes, and intermediaries. The solicitation mandates full compliance with DFARS and FAR security and administrative clauses, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting under Revision 1 of Deviation 2024-00013, DFARS 252.223-7001 for hazard warning labels, and DFARS 252.232-7006 for Wide Area Workflow (WAWF) payment instructions. Contractors must register in SAM.gov and WAWF, submit invoices and receiving reports electronically via WAWF using web entry, EDI, or FTP, and comply with NIST SP 800-171 for protecting controlled unclassified information. Mandatory use of Workflow Pro’s Mod Assist Module is required. Offers must be technically acceptable without exceptions to solicitation terms, with award determined on a lowest-priced, technically acceptable basis. The Supplier Performance Risk System (SPRS) will be leveraged to assess past performance, and all offers must include a surplus material certificate if applicable. Any alternate product proposal must
SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332919
New
Federal
VALVE,SAFETY RELIEFThis contract pertains to the procurement of a SAFETY RELIEF VALVE under solicitation SPRMM126QGF31, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of August 17, 2026. The requirement is governed by strict technical and quality standards, including compliance with MIL-DTL-901 for shock testing if new casting suppliers are used, and adherence to MIL-STD-130 Rev N for part marking. The contractor must supply the item under specified Cage Codes and Reference Numbers, with any design, material, or part number changes requiring prior written approval from the NAVICP-MECH Contracting Officer and classification under one of six defined change codes. Inspection and acceptance are to occur at the source, with the contractor responsible for all quality assurance processes, including maintaining inspection records for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and the item is subject to the mandatory use of the Wide Area Workflow (WAWF) system for electronic invoice and receiving report submission. Only authorized distributors of the original equipment manufacturer are eligible for award, requiring proof of authorization submitted with the offer. The procurement follows the Lowest Price Technically Acceptable (LPTA) evaluation method and is exempted by military service. The contract mandates compliance with numerous Department of Defense directives, including security prohibitions, small business program representations, and mandatory use of Workflow Pro for assist modules. Technical data is not provided, and all applicable documents must be obtained directly by the contractor from official DOD sources. Contractors must register for the Procurement Integrated Enterprise Environment (PIEE) and Electronic Data Access (EDA) to monitor contract actions and submit orders electronically. Delivery times are unspecified, and offers must include clear contact information, OEM details if not the manufacturer, and notification preferences for procurement updates. No drawings or technical specifications are furnished by the government, placing full responsibility on the contractor to meet all performance and compliance standards as outlined in referenced military specifications. All contractual documents are deemed issued upon electronic transmission, and any post-award changes are subject to administrative cost deductions.
SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
BALL,VALVE,PORTEDThis contract pertains to the procurement of a ported valve ball under solicitation N0010426QFE38, with a revised quantity of 26 units and a final delivery deadline of 146 days after the contract’s effective date. The item is classified as SPECIAL EMPHASIS material (Level I) due to its critical role in shipboard systems, where failure could result in catastrophic consequences including loss of life or the vessel. All materials must be refurbished to “like new” or “A” condition through a comprehensive teardown, inspection, and repair process, with a firm fixed price submission required that includes both repair and beyond-repair pricing. The contract mandates strict traceability from raw material to finished component, requiring unique identification markings, chemical and mechanical certifications, and 100% verification of all documentation. Electronic submissions through WAWF are mandatory, using the updated DODAAC N50286, and all certification data must be reviewed and accepted by Portsmouth Naval Shipyard prior to shipment. The contractor must adhere to a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative, and all welding, brazing, and heat treatment processes must comply with stringent navy specifications, including submission of procedures, qualification records, and welder certifications. Mercury is prohibited, and electronic signatures on certifications are accepted under strict controls. The contract operates under Emergency Acquisition Flexibilities and is DO-rated for national defense use under DPAS. All materials must be traceable through every manufacturing step, with certifications directly linked to physical markings on the ball and accompanying documentation. Re-work of the ball surface is permitted only within strict dimensional limits, and defects in the stem slot are acceptable only if they meet specified tolerance thresholds. Teflon coatings must conform to Chemours specifications, and welding on titanium or high-strength materials requires prior approval of procedures and qualified personnel. The contractor must maintain detailed inspection records, ensure proper segregation of materials to prevent commingling, and enforce all traceability and certification requirements on subcontractors. Final inspection requires zero-defect acceptance, with lot sizing governed by ANSI/ASQ Z1.4 or 100% inspection for small lots. Certification documents must include unqualified, affirmative statements of compliance and cannot include disclaimers. Government Quality Assurance Representatives will conduct inspections at source, and any deviations or waivers must be formally requested and approved by the Contracting Officer. The
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332919
New
Federal
VALVE,GLOBEThis contract pertains to the procurement of a 1/4 inch globe valve designated as Special Emphasis material, intended for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the ship itself. The valve must strictly comply with Carleton drawing 1970 002 and a comprehensive set of military and industry specifications including MIL-STD-1330, MIL-T-1368, ASTM-B150, and QQ-N-281, with specific requirements for oxygen cleaning, pressure testing, and material traceability. The item requires rigorous quality assurance protocols, including 100% inspection of certification data, traceability marking on all components, and adherence to ISO-9001 or MIL-I-45208 quality systems. All welding and brazing must conform to S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with all procedures and qualifications submitted for prior Navy approval. The material must be free of mercury, and traceability must be maintained from raw material through final assembly to the certified test reports, with each part bearing a unique traceability number and a CID number 887056134. The contract mandates full compliance with government inspection at source, requiring direct coordination with the Defense Contract Management Agency and submission of all documentation via the Wide Area Work Flow system to the Portsmouth Naval Shipyard prior to shipment. Certifications must include positive, unqualified statements of compliance, signed electronically or manually, and all data must be traceable to individual units. Subcontractors are subject to the same stringent controls, with prime contractors responsible for ensuring all tiered suppliers meet the contract’s quality and traceability requirements. The valve must pass rigorous proof and seat tightness pressure tests at 6750 PSIG and 4500 PSIG respectively, with no leakage or permanent deformation permitted. Delivery is FOB destination, and the contract is issued under Emergency Acquisition Flexibilities and is certified under the Defense Priorities and Allocations System. The solicitation requires electronic submission of technical documentation including welding procedures, material certifications, and quality system records via ECDS and WAWF, with strict deadlines and mandatory review cycles before production or shipment can proceed.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in 24 days
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALVThis contract specifies the procurement of a specialized ball valve parts kit for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or vessel. The material, designated as SPECIAL EMPHASIS Level I, mandates stringent quality controls, full traceability from raw material to finished component, and comprehensive certification of chemical and mechanical properties. The ball component must conform to SAE-AMS-6931 or Centrifugally cast 6AL-4V per ASTM-B367, with strict mechanical requirements and mandatory ultrasonic inspection per SAE-AMS-6931 and SAE-AMS-2631. The seats must be manufactured by Mearthane Products Inc. from MD71-GG Mearthane, with specific physical properties including hardness, tensile strength, and water absorption, all verified by test reports. Hydrostatic testing is required for each ball with a 30-minute hold at confidential pressures referenced by drawing, with dye penetrant inspection as a permitted alternative if hydrostatic fixtures are unavailable. All components require full traceability through unique heat, lot, or batch markings permanently applied to the material, with strict controls to prevent commingling and ensure documentation integrity. Certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using designated DODAAC codes and notification email. Quality system compliance with ISO-9001, ISO-10012, and ISO/IEC 17025 is mandatory, and all welding, brazing, and repair activities must adhere to specified Navy standards (S9074 series) with procedures and qualifications submitted for approval before production. Government Quality Assurance at source is required, and deliveries may only proceed upon formal acceptance. The contract includes strict provisions for configuration control, engineering change proposals, and prohibition of mercury or unauthorized coatings, with all documentation and testing records subject to 100% government scrutiny. The procurement is classified as a total small business set-aside and is rated under the Defense Priorities and Allocations System for national defense use.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
ELBOW,5INThe contract pertains to the procurement of a 5-inch elbow under solicitation N0010426QEA20, issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) Mechanical Division, with a response deadline of August 17, 2026. It incorporates a comprehensive set of federal and military requirements, including mandatory use of the Wide Area Workflow payment system, cybersecurity maturity certification, small business set-aside status, and strict compliance with inspection, packaging, and quality assurance standards defined in the Individual Repair Part Ordering Data (IRPOD). Technical documentation referenced in the IRPOD, drawings, and specifications—many marked NOFORN—must be obtained through the secured BPMI e-Commerce portal and adhered to in their full, cited revisions, with no partial use of document revisions permitted without explicit contracting officer approval. The order of precedence clearly establishes that contract amendments take priority over all other documents, followed by the schedule, terms and conditions, IRPOD, STRs, drawings, and specifications. Quality assurance is governed by the IRPOD, requiring the contractor to maintain a government-acceptable inspection system with full records retained for the contract duration and beyond. Packaging must comply with MIL-PRF-23199, particularly regarding heat-sealed envelopes for components subject to cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar standards, while fire-retardant packaging is explicitly no longer required. Mercury and mercury compounds are strictly prohibited from contact with supplied hardware. The contractor must submit pre-manufacturing procedures and test reports within 45 days of award and upon contract completion, using standardized DD Form 1423 sequences as specified in DI-QCIC-8871 and DI-QCIC-8872. All submissions must be prepared per unique contract, NSN, and item nomenclature combinations, and distribution of technical data is restricted based on DoD distribution codes, with foreign nationals explicitly prohibited from access without prior Naval Sea Systems Command authorization. The contracting officer must approve all deviations, delivery delays, or non-conformances with full justification and technical data supporting the proposed alternative.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
RETAINER,SEAT,VALVEThe contract pertains to the procurement of a Retainer, Seat, Valve designated as SPECIAL EMPHASIS Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must fully comply with Naval Ship Systems Command Drawing 801-6404739 and adhere to stringent quality and traceability controls. Materials are required to be QQ-N-286, annealed and age-hardened, with mandatory quantitative chemical and mechanical analysis, ultrasonic inspection of starting material, and slow strain rate tensile testing performed exclusively by approved laboratories. All traceability must be maintained from raw material through fabrication to final component via unique heat-lot markings, with electronic and physical records preserving integrity through every process step. Certification documentation must be 100% complete, legible, and signed, with electronic signatures accepted under strict identity verification protocols. No weld repair is permitted on QQ-N-286 material, internal threads must be cut not cold-formed, and mercury is strictly prohibited from contacting any supplied hardware. All deliveries must be preceded by certification data submission via WAWF to Portsmouth Naval Shipyard (N50286) for prior review and acceptance, with notifications sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no material may ship without formal acceptance. The contractor must maintain and document a quality system compliant with ISO-9001 and either ISO-10012 or ANSI-Z540.3 with ISO-17025, or alternatively MIL-I-45208 with MIL-STD-45662, subject to government audit. Thread inspections must follow FED-STD-H28 System 21 or 22 as applicable, and all packaging, preservation, and marking must conform to MIL-STD-2073. Subcontractors must be evaluated, monitored, and their quality controls aligned with prime contractor obligations. Any deviations or waivers require explicit Contracting Officer approval and must be classified as Critical, Major, or Minor. Final acceptance relies on zero-defect lot inspection per ANSI/ASQ Z1.4, with 100% verification of all certifications, traceability markings, and nondestructive test results. The contract is a total small business set-aside, rated under DPAS for national defense priority, and includes mandatory compliance with Buy American Act, Security Prohibitions, and other federal regulations. Delivery must be completed
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALVThis contract is a firm fixed-price repair purchase order issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) for the refurbishment of a ball valve parts kit designated as SPECIAL EMPHASIS material due to its critical role in shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The work requires complete teardown, inspection, and repair of components to "like new" or "A" condition in strict compliance with Newport News Shipbuilding drawings 255583 and 255584, with specific materials including SAE-AMS-6931 for the ball and MD71-GG Mearthane for the seats manufactured exclusively by Mearthane Products Inc. All parts must retain traceability from raw material through final assembly via unique identification markings, with chemical and mechanical certifications required for metallic and non-metallic components and submitted as Objective Quality Evidence (OQE). The contractor must furnish complete certifications for ultrasonic inspection, non-destructive testing, and material composition, with no transcription or disclaimers permitted on documentation. The contract mandates adherence to ISO-9001 quality systems with supplementary calibration standards, and all welding, brazing, and repair activities must comply with S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, requiring prior submission and approval of procedures and qualification data. Traceability is strictly enforced, requiring permanent marking on all critical parts including the ball’s waterway and seat’s outer surface, with exceptions for Teflon seats requiring tagged identification. Final delivery is capped at 100 days after contract effective date, and all certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard (DODAAC N50286) with notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no shipment may occur without prior acceptance. The order is DO-rated under the Defense Priorities and Allocations System and issued under Emergency Acquisition Flexibilities. Contractors must also provide a beyond-repair price, comply with Buy American requirements, and adhere to mercury-free policies. Subcontractors are subject to the same quality controls, and the government reserves the right to conduct inspections at any facility. Past performance will be evaluated per FAR and DFARS guidelines, and all deviations or waivers require formal approval by the Contracting Officer.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
TAILPIECE,UNIONThis contract pertains to the procurement of a specialized tailpiece component, designated as SPECIAL EMPHASIS material (Level I), for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the ship itself. The requirements are stringent, mandating strict adherence to Naval Sea Systems Command drawings and specifications, including ASME, ASTM, MIL-STD, and ISO standards, with particular emphasis on material traceability, chemical and mechanical certification, and non-destructive testing. The primary component, Tailpiece, piece 73-S1, made of ASTM-B369 UNS C96400, must undergo rigorous testing including hydrostatic pressure, dye penetrant inspection, weldability, and radiographic examination, with all results documented in certified reports that are fully traceable to unique heat-lot markings on the material. All welding and brazing activities must comply with Navy-specific procedures (S9074-AQ-GIB-010/248 and 0900-LP-001-7000), and qualification data must be submitted and approved prior to production. Radiographic shooting sketches must be submitted for approval 45 days before radiography, and final production radiography must be approved by Portsmouth Naval Shipyard before shipment. The contractor must operate under a certified quality system—either ISO-9001 with ISO-10012 and ISO/IEC 17025 or the alternate MIL-I-45208 and MIL-STD-45662—and is subject to Government Source Inspection by DCMA at all stages of production. All materials must be traceable from raw stock through every manufacturing and subcontracting step, with traceability markings permanently affixed and maintained even after assembly. Certification data, including test results and compliance statements, must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to each shipment, with specific designations for shipping, inspection, and acceptance using DODAAC N50286. The contract requires 100% inspection of all certification documents, zero-defect acceptance criteria during final inspection, and mandates that no material be shipped without prior written acceptance. Additionally, the contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System, with mandatory compliance to Buy American provisions, Small Business Subcontracting Plan requirements, and security protocols outlined in classified document DD Form
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVEThis contract pertains to the supply of a critical fluid valve stem, designated as SPECIAL EMPHASIS MATERIAL (Level I), intended for use in a shipboard system where failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The item must strictly conform to Navships drawing 803-1385965 and specified material standards including ASTM-A182 Grade F6a, Class 2 or SAE-AMS-QQ-S-763 Class 410, Condition T, with additional requirements for hardness, welding, brazing, and traceability. All material must undergo rigorous chemical and mechanical testing, with certifications submitted electronically via WAWF and traceable through unique heat-lot markings permanently applied in accordance with MIL-STD-792. Electronic signatures are accepted for certifications, provided they are secured and uniquely attributable to authorized personnel, and all documentation must be accurate, unqualified, and free of disclaimers. The contract enforces stringent quality assurance controls requiring ISO-9001 and ISO-10012 or MIL-I-45208 with MIL-STD-45662 compliance for the contractor’s quality system, subject to government audits and source inspection. All subcontractors must adhere to the same requirements, with prime contractors responsible for monitoring supplier capability and ensuring traceability throughout procurement. Material certification reports, non-destructive testing records, and weld procedure qualifications must be submitted for review and approval prior to production, with each weld requiring a Certificate of Compliance and consumed weld metal documentation. Final acceptance is contingent on 100% inspection of traceability markings and certification data, with zero defect tolerance for lot acceptance. Delivery is limited to 365 days after contract effectiveness, with all shipments requiring prior WAWF acceptance by Portsmouth Naval Shipyard using DODAAC N50286 and notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. This is a DO-rated order under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, with mandatory compliance to Buy American and Small Business subcontracting requirements, and all data submissions governed by ECDS.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Al DLA Aviation At Huntsville

Same awarding agency

NAICS: 336412
New
Federal
SPRRA126Q0025 // STARTER DRIVE, ASSEM // NSN 2840-01-461-9195This solicitation is a sole-source procurement issued to Honeywell Intl, Inc. for the acquisition of seven units of the Starter Drive, Assembly, Part Number 2-160-010-21, with National Stock Number 2840-01-461-9195. The procurement is managed under solicitation number AX6T6055AX and was posted on July 17, 2026, with a response deadline of August 18, 2026, at 7:30 PM Eastern Time. The contract falls under NAICS code 336412, which classifies it within the Aircraft Engine and Engine Parts Manufacturing sector. The issuing agency is the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, operating under the Department of Defense, with Richard Bulson designated as the primary point of contact for inquiries. The place of performance is listed as an unnamed location in Arizona, and the solicitation is accessible through the SAM.gov portal for further details.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541715
New
Federal
CWS Engineering Services/Contractor Logistics Support (Sole Source to Invariant Corporation)The Defense Logistics Agency at Redstone Arsenal, Alabama, is conducting market research to identify qualified sources for providing personnel, support, and services related to the Containerized Weapon Support (CWS), CWS-Advance Precision Kill Weapon System (CWS-A), and Serenity programs. These services will be delivered under the existing Indefinite Delivery Requirements Type Contract SPRRA2-24-D-0010 in support of the Tactical Aviation and Ground Munitions Project Office. The government intends to award this effort solely to Invariant Corporation under FAR 6.302-1(a)(1) due to its status as the only responsible source. While the award is predetermined, the agency encourages all small business categories—including 8(a), SDB, HUBZone, WOSB, and SDVOSB—to register and demonstrate capability to potentially compete for future opportunities. Contractors must meet prequalification requirements and assume full responsibility for engineering, manufacturing, supply chain management, logistics, long-lead procurement, obsolescence mitigation, and final delivery, bearing all associated costs. This notice is strictly for informational and planning purposes and does not constitute a solicitation, request for proposal, or commitment to issue a future contract. No funds are available for the preparation of responses, and submissions are entirely voluntary. Although responses are accepted until July 17, 2026, the government is under no obligation to award any contract based on the information received. The point of contact for inquiries is Scott Alexander at scott.alexander@dla.mil, with Anna Phillips as a secondary contact. All potential vendors must independently seek source approval and ensure compliance with any future solicitation terms, as this announcement serves only as a preliminary market survey and contains no financial or contractual implications.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
Federal
PANEL,CONTROL, ELECT - RFPThe Government is seeking to acquire twenty-four PANEL, CONTROL, ELECT units, NSN 5895-01-721-1771 with part number 13748140, under a firm-fixed price single purchase contract for use on the IBAS Weapon System. This requirement is strictly limited to two sole-source manufacturers, THOMAS GLOBAL with CAGE code 6ZT04 and PALOMAR with CAGE code 1CWA3, due to insufficient technical data and lack of rights to reprocurement information from alternative sources. The production lead time is 135 days after contract award for all twenty-four units, with delivery required to Tobyhanna, PA 18466-5059. This acquisition is subject to strict export controls under the Arms Export Control Act and the Export Administration Act, prohibiting any release of technical data outside the United States without prior government approval. All offerors and their supply sources must hold an active United States/Canada Joint Certification Program certification to access controlled information, and delays in award will not be granted to accommodate incomplete certifications. Communication for solicitation requests must be directed exclusively via email to Cheyenne Wright at Cheyenne.Wright@dla.mil, including name, company name, CAGE code, and telephone number; no telephone inquiries will be accepted. Foreign firms must route requests through their respective embassies. While current efforts are underway to secure data rights that may enable future competition, this procurement remains restricted to the sole-source suppliers for now. The solicitation closes on July 10, 2026, and is posted under SPRRA2-26-R-0086 with NAICS code 334290 under the Department of Defense, Office of DLA Aviation at Redstone Arsenal, Alabama.
Other Communications Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
Clutch Assembly, CenThe Defense Logistics Agency is conducting market research to identify qualified sources for the procurement of a Clutch Assembly, Cen, with NSN 1615-01-305-6943 and part number 107DS214-8, intended for use on the CHINOOK weapon system. This effort supports potential future competition and explores the feasibility of setting aside the acquisition for small businesses, including 8(a), small disadvantaged, service-disabled veteran-owned, hubzone, and women-owned concerns. The North American Industry Classification System code is 336413, with a size standard of 1,250 employees. The government does not own the data required to source this part from alternative suppliers and reverse engineering is deemed uneconomical, resulting in a sole source procurement under FAR 6.302-1(a)(1) due to the limited number of responsible sources. Companies interested in becoming qualified suppliers must meet prequalification criteria and bear full responsibility for all engineering, manufacturing, supply chain, logistics, obsolescence management, and delivery costs associated with achieving source approval. Responses are voluntary and do not constitute an offer or a commitment from the government; no funds are available to cover preparation costs. This announcement is purely informational for market research purposes and does not represent a solicitation or guarantee of future contract issuance. All interested firms are directed to the AvMC public website to pursue source approval, and inquiries can be directed to Erica Allen at the Redstone Arsenal office.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
NSN: 8145-00-549-6647 / PN:13414-078 / AX6L7176AXThe Defense Logistics Agency at Redstone Arsenal, Alabama, is conducting market research under a presolicitation notice for NSN 8145-00-549-6647, part number 13414-078, with solicitation number AX6L7176AX, classified under NAICS code 332439 and designated as a Total Small Business set-aside. This notice is strictly for informational and planning purposes and does not constitute a solicitation, request for proposal, or request for quotation; no formal contract award will result from this action. The government is seeking qualified sources capable of supplying shipping and storage components in support of the ASD weapon system, with full technical data rights held by the government and no restrictions on engineering, tooling, or manufacturing. Contractors interested in future opportunities must meet prequalification requirements and are encouraged to pursue source approval through the AvMC public website. Responsibilities for any future award would encompass all recurring and nonrecurring engineering services necessary to qualify as a source, along with complete end-to-end manufacturing and production oversight, including supply chain management, logistics, parts forecasting, long-lead procurement, material planning, obsolescence mitigation, and final asset delivery. The contractor would bear all associated costs, including those arising from performance challenges. While no pricing, delivery schedules, inspection criteria, or contract administration details are available at this stage, interested parties must demonstrate the capability to meet the full scope of anticipated requirements and comply with all terms at the unit prices established upon future award. Responses are requested by July 13, 2026, and inquiries should be directed to Alivia Boyd or Phanicia Montgomery at the provided contact details.
Other Metal Container Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336414
New
Federal
JAGM/HELLFIRE MISSILE SPARESThe Defense Logistics Agency at Redstone Arsenal, Alabama, is soliciting bids under solicitation number SPRRA226R0030 for an inert warhead assembly, part number 13415264, with an estimated quantity of 200 units, to support the Joint Air-to-Ground Missile and Hellfire weapon systems for the U.S. Army Aviation and Missile Life Cycle Management Command. This acquisition is restricted exclusively to Lockheed Martin Corporation, CAGE code 04939, under FAR 6.103-1(b) due to the nature of the item, which requires direct procurement from the original manufacturer. The procurement is conducted under the Lockheed Martin Captain of Industries Supplier Capability Contract SPE4AX22D9000 using a firm-fixed-price, indefinite delivery vehicle. The estimated production lead time is 870 days after contract award without first article testing, and the contractor must manage all aspects of manufacturing and production, including supply chain, logistics, forecasting, long-lead parts procurement, material obsolescence mitigation, and final delivery. All offerors must meet mandatory prequalification requirements to be eligible for award, and firms are encouraged to seek source approval to qualify for future opportunities. The contractor is responsible for all recurring and nonrecurring engineering efforts required to establish qualified source status and assumes full financial responsibility for any associated costs. First Article Testing, governed by FAR 52.209-3, is required to validate manufacturing capability, with the contractor bearing the burden of providing facilities, test equipment, and personnel, while the Defense Contract Management Agency Quality Assurance Representative must participate. A First Article Test Report is mandatory for acceptance, and waivers may be submitted with supporting documentation. The contract includes strict export control restrictions under the Arms Export Control Act and Export Administration Act, prohibiting unauthorized release of technical data outside the United States. Offerors and their suppliers must possess an active United States/Canada Joint Certification Program certification to access restricted information. The procurement has a one-year period of performance with performance location in Orlando, Florida. Proposals must be submitted by July 31, 2026, and all communications must be directed to the designated points of contact through email, using the specified subject line. The solicitation will be published exclusively via SAM.gov, and the government retains the right to cancel the acquisition at any time prior to award without financial obligation to offerors. The government anticipates subsequent solicitations will request Economic Order Quantities to optimize procurement efficiency based
Guided Missile and Space Vehicle Manufacturing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334412
New
Federal
SPRRA226R0097 PATRIOT SPARES – LOCKHEED MARTIN SOLE SOURCEThe U.S. Government is seeking a firm fixed price single purchase contract for a circuit card assembly, NSN 5998-01-497-3340, part number 13508140, in support of the Patriot missile weapon system, with an estimated quantity of 80 units. This item is exclusively sourced from Lockheed Martin Corporation Missiles and Fire Control, CAGE 64059, due to restricted technical data rights, absence of government-owned intellectual property, and the economic impracticality of reverse engineering. The item carries an AMC/AMSC code 3P, which prohibits acquisition from any other source except the original manufacturer, and this acquisition is justified under FAR 6.302-1(A)(2) due to limited responsible sources. The estimated production lead time is 720 days after contract award, with deliveries required to Fort Bliss, TX. All communications must be directed via email to DLA-AHCA, Mari Bretz, and must reference the solicitation number SPRRA2-26-R-0097, including the offeror’s name, company, CAGE code, phone number, and email address. No telephone requests are permitted. The contractor must be capable of managing all aspects of manufacturing, including supply chain, long-lead parts procurement, obsolescence mitigation, logistics, and final delivery, and will bear all recurring and non-recurring engineering costs associated with qualifying as a source. While the acquisition is currently sole source, the Government encourages other businesses—including 8(a), small businesses, service-disabled veteran-owned, HUBZone, and women-owned small businesses—to seek source approval for future opportunities. Subsequent solicitations may include economic order quantities to optimize procurement efficiency, and the Government retains the right to adjust award quantities based on market research, historical data, and economic conditions. The Government may cancel this procurement at any time prior to award without obligation to reimburse offerors. Export of technical data associated with this acquisition is restricted under the Arms Export Control Act and the Export Administration Act, and may not be released outside the United States without prior government approval. Foreign firms must submit requests through their respective embassies.
Bare Printed Circuit Board Manufacturing

POSTED

3 days ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
Federal
SPRRA224R0081 PATRIOT SPARES – LOCKHEED MARTIN SOLE SOURCESolicitation SPRRA224R0081 is a sole-source, firm-fixed-price contract issued by the Defense Logistics Agency for the procurement of spare parts supporting the Patriot Missile Systems, exclusively awarded to Lockheed Martin Corporation DBA Lockheed Martin Missiles and Fire Control with CAGE code 64059. The requirement spans five years and encompasses specific National Stock Numbers including 6130-01-518-1970, 6130-01-475-0862, 5998-01-440-8043, and 6150-01-531-5495, with minimum quantities defined for each. The contract includes detailed technical and quality standards, requiring compliance with ANSI/ISO/ASQ 9001:2015 and AS 9100 equivalents, tailored per item lineage—full standards apply to NSN 5998-01-440-8043 while only operational requirements are mandated for the others. First Article Testing is mandatory, with a required First Article Test Report submitted under FAR 52.209-3, and the contractor must not retain the first article used as the manufacturing standard. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-130 for unique item identification, with all wood packaging compliant to ISPM-15. Delivery is FOB origin to Redstone Arsenal, Alabama, with staggered commencement timelines—720 days for most items and 180 days for one line item—at a rate of five units per month after delivery order receipt. Pricing is structured as range-based for the cable assembly and power supply line items, with the highest range price applied if orders exceed the upper threshold. Performance-based payments and electronic invoicing via WAWF are required, and contractors must maintain SAM.gov registration with current representations and certifications, including flow-down obligations regarding labor, ownership, trade agreements, and cybersecurity controls under NIST SP 800-171. The original solicitation was issued on September 24, 2024, with proposal due dates extended multiple times through eleven amendments, culminating in a final deadline of August 27, 2026, with all other contract terms unchanged throughout the amendment history.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
SPRRA226R0061 PATRIOT SPARES – LOCKHEED MARTIN SOLE SOURCEThis contract SPRRA226R0061 is a sole-source Letter Request for Proposal issued to Lockheed Martin Corporation for the procurement of a critical component—specifically a Printed Wiring Board (NSN 5998-01-728-8090, Part Number 13508610)—supporting the US Army Aviation and Missile Life Cycle Management Command’s Patriot Weapon System. It extends the existing Lockheed Martin Captain of Industries Supplier Capability Contract (SCC) and its Firm-Fixed-Price Indefinite Delivery Contract. The procurement is for an estimated annual demand of 60 units, with delivery to Chambersburg, PA. Accelerated delivery is authorized without additional cost, with production lead times stipulated at 720 days after contract award without First Article Testing (FAT) and 1500 days with FAT. Proposals must be submitted electronically by July 17, 2026, addressing both technical compliance—including adherence to quality specifications, Item Unique Identification requirements, and potential FAT pricing—and cost/price details to enable a fair and reasonable price assessment. The submission must include verifiable, unredacted Other Than Certified Cost or Pricing Data, preferably using the ProPricer system with mandatory cost breakdown tabs. Pricing should cover fixed prices across specified quantity ranges and separate FAT unit pricing. Evaluation criteria focus on meeting all solicitation terms and conditions, technical acceptability, and price reasonableness, with proposals failing these standards deemed ineligible. The contract line item numbers define quantities for production and FAT, and communications are directed to the designated government points of contact.
Bare Printed Circuit Board Manufacturing

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333413
New
Federal
FAN, CIRCULATINGThe contract concerns the procurement of circulating fans (NSN 4140-01-476-2343, PN 13502436) to support the M-D6 Patriot Weapon System, issued by the Defense Logistics Agency at Redstone Arsenal, Alabama. Originally, this solicitation was a 100% small business set-aside for a firm fixed price, one-time buy of 80 units, requiring a Government First Article Test, with provisions encouraging accelerated delivery, long lead time item management, and strict quality deficiency reporting protocols. However, subsequent amendments transitioned the solicitation from a small business set-aside to a full and open competition, removing related small business clauses and extending the response deadline to January 16, 2026. This procurement falls under NAICS code 333413 and features a firm fixed price contract type. The solicitation is fully competitive, with all terms and conditions intact aside from the removal of the set-aside status. Contact points for inquiries include Brylee Malone and Michael Romine at the Defense Logistics Agency. The acquisition requires compliance with detailed submission instructions, technical data package access upon registration, and the use of ProPricer-generated cost breakdowns. The contract supports critical military equipment supply chains, emphasizing timely and quality-focused delivery to sustain weapon system readiness.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
Federal
RNLASF APACHE M-TADS/M-PNVS SPARES– LOCKHEED MARTIN SOLE SOURCEThis contract, identified as SPRRA126R0053, extends the proposal due date for a sole-source procurement from Lockheed Martin Corporation to supply critical spare components for the Apache M-TADS/M-PNVS system used by the Royal Netherlands Land Air & Space Force. The procurement is issued under FAR 6.103-1(b), confirming Lockheed Martin as the only responsible source capable of meeting the requirements. The deliverables include specific parts such as the M-PNVS Turret, Bore sight Module, Color TADS Display, Laser Range Finder, NSA Structure, Night Sensor Shroud, Targeting Receiver, PTUR Receiver, and MPAZD, with exact quantities listed and identified by NSNs and part numbers. The contract will be executed as a Firm-Fixed-Price delivery order under Basic Ordering Agreement SPE4A125G0025, governed by terms from BOA SPE4A123G0017. Proposals must include comprehensive, un-sanitized cost data submitted in Excel format with working formulas, detailing labor categories, hours, material and equipment costs, and full cost breakdowns aligned with FAR 15.408-2 and Table 15-1. Subcontractor pricing and cost analyses are mandatory, with all indirect rates must be substantiated by recent Forward Pricing Rate Agreements, Recommendations, or three years of incurred cost submissions to DCAA or DCMA. Proposals must also address potential Organizational Conflicts of Interest per FAR 9.5 and submit a subcontracting plan as a separate document. Technical compliance is mandatory for award eligibility, with non-conforming proposals deemed unacceptable. Additional requirements include adherence to MIL-STD-130 for item marking, ISPM 15 for international wood packaging with heat treatment and ALSC marks, MIL-STD-129 and ISO/IEC 16388 for barcode labeling, and compliance with lead-free and counterfeit part management standards. Delivery is to the Traffic Bureau of the Netherlands Ministry of Defense in Columbia, Maryland, with inspection and acceptance occurring at origin via DD-250. Accelerated delivery is encouraged at no additional cost. The Government retains full discretion in awarding quantities, may require First Article Testing, and strictly prohibits assumptions, exceptions, or unilateral changes in proposals. All communication must be directed exclusively to the designated DLA contracting team, and any system transition to the Army Contract Writing System will not alter contractual obligations. The solicitation
Commercial and Service Industry Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in 3 months
View Details
NAICS: 334412
New
Federal
ELECTRONIC COMPONENTThis procurement is a sole-source, non-commercial acquisition for an electronic component with NSN 5998-01-535-3992 and part number 11472013-2, intended for use on the M-D6 Patriot Weapon System. The contract is an Indefinite Delivery Indefinite Quantity (IDIQ) with a firm fixed price structure, covering a five-year period, with a minimum order of 41 units and a maximum of 57 units. The requirement is exclusively reserved for Spartronics Plaistow, Inc. (CAGE Code 070D6), as the only responsible source due to lack of adequate technical data and inability to economically obtain rights to the data, despite ongoing efforts to enable future competition. Proposals must be submitted in response to solicitation number SPRRA2-26-R-0085, which was posted on July 14, 2026, with a deadline of August 14, 2026. All communications must be directed via email to Cheyenne Wright and Jean Paul Bretz, and each submission must include the company name, address, CAGE code, technical point of contact details, and socio-economic status classification. The contractor is required to perform a Contractor First Article Test on one sample, which will be inspected and accepted by the Defense Contract Management Agency at origin. Delivery must be FOB destination to Fort Bliss, Texas, no later than 135 days after contract award. The acquisition is subject to stringent export control regulations under the Arms Export Control Act and the Export Administration Act, prohibiting unauthorized release of technical data outside the United States. Both the offeror and any upstream suppliers must maintain an active United States/Canada Joint Certification Program certification to access controlled data; failure to do so will result in disqualification without opportunity for extension or waiver. Offerors with proposed values exceeding $10 million must submit certified cost and pricing data in accordance with FAR Part 15. The NAICS code is 334412, with a size standard of 750 employees, and no set-aside provisions apply.
Bare Printed Circuit Board Manufacturing

POSTED

4 days ago

DEADLINE

in 27 days
View Details