Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Stainless Steel Ladder and Access System Fabrication & Installation

Active

State & Local

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the fabrication and installation of corrosion-resistant stainless steel ladders, platforms, and access systems within a reservoir located in Glendora, California, using Type 316 or 316L stainless steel to ensure long-term durability in wet, high-corrosion environments. All work must adhere to stringent material specifications to resist degradation from prolonged water exposure and chemical contaminants, with the focus on safety, structural integrity, and compliance with industrial access standards. The project is classified as a subcontract under NAICS code 332312, indicating specialized metal fabrication and installation services are required. Responses are due by August 20, 2026, and the contract is being managed by the City of Glendora with performance taking place entirely at the reservoir site in zip code 91741. The solicitation is open to qualified vendors capable of handling custom metal fabrication, on-site installation, and adherence to corrosion-resistance benchmarks critical for submerged or high-moisture applications. No set-aside provisions are specified, and while no point of contact is listed, interested parties can access further details through the provided BidAmerica link.

General Info

Fabricate and install Type 316 stainless steel ladders and platforms at Glendora reservoir by August 20, 2026.

Agency

California → City of GlendoraView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Glendora, CA, 91741, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → City of Glendora

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → City of Glendora

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication and installation of corrosion-resistant stainless steel ladders, platforms, and access systems using Type 316 or 316L steel inside the reservoir.

Similar Contracts

Same NAICS industry code

Supply of Drainage Materials (Pipes, Grates, Inlets)The contract involves the supply of drainage materials critical for field rehabilitation efforts, including corrugated metal pipe, high-density polyethylene pipe, precast concrete structures, grates, and inlets. These components are essential for maintaining and upgrading stormwater infrastructure, ensuring proper water flow and structural integrity in transportation-related projects. The solicitation is classified as a subcontract under NAICS code 332312, which corresponds to prefabricated metal building manufacturing, indicating the specialized nature of the materials required. The opportunity was posted on July 29, 2026, with a response deadline of August 25, 2026, giving potential suppliers approximately four weeks to prepare and submit proposals. The contracting entity is the Georgia Department of Transportation, which will oversee the delivery and use of these materials across its drainage rehabilitation initiatives. While specific performance locations and point of contact details are not provided, the work is expected to occur within Georgia. Interested parties can access more information through the official link provided for the electronic request for quotation system.

Department of Transportation

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract pertains to the fabrication and on-site erection of structural steel components for construction projects under the San Diego Unified School District. Work will be performed in San Diego, California, with a specific performance zip code of 92124, and encompasses the full scope of manufacturing steel elements as well as their assembly at designated project sites. The NAICS code 332312 identifies this as a specialty trade contractor activity focused on structural steel fabrication and erection, indicating the specialized nature of the required work. This is a subcontract opportunity with a response deadline of August 20, 2026, at 9:00 PM Pacific Time, and it was posted on July 29, 2026. All submissions must be completed through the provided BidAmerica portal before the deadline to be considered.

San Diego Unified School District

POSTED

DEADLINE

Precision Fastener Supply – Machine ScrewsThe contract calls for the supply of 3,000 precision machine screws that must fully comply with military specifications, ensuring rigorous quality, dimensional accuracy, and material integrity required for defense applications. All items must be delivered with compliant packaging, proper marking, and complete documentation to meet the Defense Logistics Agency’s acceptance criteria, which includes traceability, labeling, and certification standards essential for military procurement. The requirement is issued as a subcontract under the NAICS code 332312, indicating it involves the manufacturing of industrial fasteners and related hardware. The solicitation was posted on July 29, 2026, with a firm response deadline of August 6, 2026, and is managed by the Aviation Supply Chain ESOC Buys team under the Department of Defense. There is no set-aside designation, meaning all eligible contractors may bid. The place of performance and point of contact details are not specified, but the contract will be processed through the DIBBS system, and successful vendors must be prepared to fulfill all technical, administrative, and logistical demands to ensure seamless integration into the defense supply chain.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Structural Fittings Manufacturing and SupplyThe contract requires the manufacture and supply of fifteen units of Structural Fitting with National Stock Number 1560-01-649-2616, all of which must fully comply with the Department of Defense’s technical specifications, quality requirements, packaging standards, and strict traceability protocols set by the Defense Logistics Agency. The work is scoped as a subcontract under NAICS code 332312 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. All deliverables must meet rigorous defense-grade compliance criteria to ensure suitability for military use, with emphasis on documentation, material sourcing, and quality control throughout the production lifecycle. Bids are solicited with a response deadline of August 11, 2026, and the opportunity was posted on July 29, 2026. There is no set-aside designation specified, and the place of performance has not been defined, indicating flexibility in manufacturing location provided all contractual obligations are met. The procurement is being handled through the DIBBS system, and interested parties must access the full solicitation via the provided UI link to obtain detailed technical documentation and submission guidelines. Compliance with DLA standards is non-negotiable, and failure to meet traceability or quality benchmarks will result in disqualification or contract termination.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Welder’s Helmet SupplyThe contract is for the procurement and delivery of commercial off-the-shelf welder’s helmets to meet Department of Defense standards, with all items required to comply with DoD labeling and shipment regulations. The solicitation is issued under the NAICS code 332312 for other fabricated metal product manufacturing and is structured as a subcontract, targeting suppliers capable of providing compliant protective equipment without custom engineering. Delivery must be made to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, and all shipments must align with DoD logistical protocols to ensure traceability and uniformity across military supply chains. The opportunity was posted on July 29, 2026, with a firm response deadline of August 10, 2026, giving potential vendors approximately two weeks to submit proposals. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, indicating this requirement supports military or defense-related operations. While no specific set-aside designation is indicated, the contract is accessible to general commercial vendors provided they meet the technical and regulatory requirements. The official solicitation can be accessed through the DIBBS portal, and all submissions must adhere strictly to DoD compliance standards for labeling, packaging, and documentation to ensure acceptance and timely fulfillment.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacture of Metal Marine DoorsThe contract seeks the fabrication of 26 metal marine doors, each with a clear opening of 26 inches by 66 inches, specified under NSN 2040-01-253-4544, and must fully comply with military standards for durability and performance in harsh marine environments. The work will be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the doors must be manufactured to meet exacting defense-grade requirements for corrosion resistance, structural integrity, and operational reliability under saltwater exposure and extreme conditions. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 332312, ensuring eligibility is restricted to qualifying small businesses. The solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026, and is administered by the Maritime Supply Chain organization within the Department of Defense. While no point of contact or detailed technical specifications are provided in the data, bidders are expected to fully understand and adhere to the referenced NSN and associated military specifications for marine door systems, and submissions must align with the set-aside criteria to be considered for award.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Structural Aluminum Alloy Beam SupplyThe contract requires the supply of 589 linear feet of structural aluminum alloy beams made from 2024/T-3511 alloy, fully compliant with SAE AMS-QQ-A-200C specifications, ensuring the material meets rigorous aerospace-grade standards for strength, durability, and dimensional accuracy. The beams must be delivered in exact dimensions and lengths as specified, with no tolerance deviations allowed, to ensure seamless integration into critical structural assemblies. This is a subcontract issued by DLA Dist San Joaquin under the Department of Defense, with a posted date of July 29, 2026, and a response deadline of August 7, 2026. It falls under NAICS code 332312, which categorizes it as a metal framing manufacture operation. The place of performance and point of contact details are not provided, but the procurement is accessible via the DIBBS portal, indicating a formal government contracting process requiring strict adherence to technical and delivery requirements.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Structural Steel Fabrication and SupplyThe contract involves the supply and delivery of structural steel plates that must meet rigorous military specifications, ensuring durability, dimensional accuracy, and performance under demanding operational conditions. All materials must be packaged and labeled in strict accordance with MIL-STD-129 standards, which govern uniformity in military logistics, including labeling formats, marking content, and packaging integrity to facilitate handling, storage, and identification throughout the supply chain. The fabricated components are intended for use at Robins Air Force Base, Georgia, and must be delivered to meet the exacting requirements of the Department of Defense's supply chain operations. This is a subcontract opportunity issued under the NAICS code 332312 for Structural Metal Fabrication, with a response deadline of August 6, 2026, and a posted date of July 29, 2026. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV, indicating the procurement is managed by a defense logistics unit focused on aerospace and defense support. While no set-aside status or point of contact is specified, bidders must comply with all technical, logistical, and compliance obligations tied to military-grade steel fabrication. The solicitation is accessible via the DIBBS portal, and all proposals must demonstrate full adherence to military standards for both product quality and packaging.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Structural Steel Plate FabricationThe contract involves the manufacture and delivery of a precision-machined aluminum structural plate designed to meet aerospace-grade specifications under DLA technical standards. Despite the title referencing steel, the technical requirements specify aluminum as the material, and the work must adhere to stringent quality and dimensional controls typical of defense and aerospace applications. The item is to be delivered to the place of performance at JB MDL with zip code 08641-5500, indicating the delivery destination is a major U.S. military installation. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, indicating a short, competitive procurement window typical for specialized subcontracting opportunities. This is classified as a subcontract under NAICS code 332312, which corresponds to forging and stamping, suggesting the work may involve forming and machining processes rather than pure casting or fabrication. The contracting organization is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, highlighting the defense supply chain context. No set-aside information is provided, meaning the opportunity is open to all qualified suppliers regardless of business size or ownership characteristics. The absence of a point of contact and specific agency address implies that all communications must be conducted through the designated DIBBS portal, where the full solicitation document can be accessed via the provided link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BEAM, STRUCTURAL

Solicitation # SPE8E4-26-Q-0332

The contract specifies the procurement of structural aluminum alloy beams made from 2024/T-3511 material with dimensions of 0.750 inches in height, 1.25 inches in width, and 0.063 inches in thickness, supplied in even whole feet lengths between 10 and 12 feet, at a weight of approximately 0.150 pounds per foot. A total of 589 linear feet is required under solicitation SPE8E4-26-Q-0332, with firm fixed pricing and zero variance allowed in quantity. Delivery must be completed within 30 days after award, with inspection and acceptance occurring at the destination. All material must conform to SAE AMS-QQ-A-200C and SAE AMS-QQ-A-200/3A specifications, and must be accompanied by a Certificate of Quality Compliance (Mill-Material Certification) with each shipment, a copy of which must be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on every unit, including the DLA contract number, NSN, specification revision, alloy, temper, manufacturer’s name, heat and lot numbers, and dimensions, applied via stamping or stenciling in legible, waterproof, and non-contaminating ink. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches in nominal outer diameter. Packaging must comply with MIL-STD-2073-1E and ASTM B660 standards, and markings must adhere to MIL-STD-129, including dual-unit labeling when applicable. The supplier must be on the Qualified Suppliers List for Distributors (QSLD), and failure to comply results in rejection or potential criminal penalties. The material is designated a Critical Application Item, requiring strict adherence to quality and traceability controls. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with FOB origin terms and no government inspection waivers apply beyond those stipulated for QSL-compliant suppliers.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

SHROUD ASSEMBLY, GENERA

Solicitation # SPE4A6-26-Q-1238

The contract pertains to the supply of 37 units of a shroud assembly for general use, identified by NSN 1560-00-829-9365, under solicitation SPE4A6-26-Q-1238. Engineering requirements are detailed in Drawing 008299365, with specific welding standards mandating weld class 'B' as defined in BAC 5975 and permitting a 3/16-inch weld size. The procurement is governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and inspection and acceptance are to occur at the origin. Government identification must be removed from non-accepted items, and while item unique identification is not required per the service customer’s request, DFARS 252.211-7003(c)(1)(i) remains in effect. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the U.S. Department of State or Commerce. Access to controlled data is limited to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandated DOD export control training and DLA questionnaires, and have been formally approved by DLA. The delivery schedule requires fulfillment within 200 days after award, with the solicitation open for response until August 11, 2026, and the contract managed by the Department of Defense’s ASC Commodities Division through Point of Contact Tierra Smith.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-599Z

This contract is for the procurement of 97 units of a resilient weapon system mount, identified by NSN 5342-01-159-6456 and part number 12293273-6, under solicitation SPE4A7-26-T-599Z. The item is classified as a critical application and Type I shelf-life item with a non-extendable shelf life of 60 months, requiring at least 85% of its shelf life to remain upon receipt by the first government activity. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including proper labeling per MIL-STD-129 with special marking code 32 for Type I shelf life. The product must be palletized and shipped FOB origin, with inspection and acceptance occurring at the point of manufacture. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must be verified at level VII with an AQL of 0.1. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. Delivery is due within 171 days of award, with an original required delivery date of April 21, 2027, and the item must be shipped to DDSP New Cumberland Facility in Pennsylvania. The unit price is $97.00 per each, totaling $9,409.00, and procurement is governed under NAICS code 332312 by the Department of Defense’s ASC Supplier Oper AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from California → City of Glendora

Same awarding agency

Material Supply: PVC SDR-26 PipeThe contract requires the supply of PVC SDR-26 pipe for use in water lines or connections as detailed in accompanying technical specifications. This is a subcontract under the City of Glendora, with the place of performance located in Glendora, California, zip code 91741. The solicitation falls under NAICS code 325222, which pertains to plastic pipe and pipe fitting manufacturing. The opportunity was posted on July 28, 2026, with a firm response deadline of August 20, 2026, at 5:00 PM Pacific Time. All materials must meet the specified technical requirements to ensure compatibility and performance within the City’s water infrastructure systems. Bidders are expected to adhere to the standards outlined in the technical documents and deliver goods to the designated location within the agreed upon timeline.

Noncellulosic Organic Fiber Manufacturing

POSTED

DEADLINE

Material Supply: Ductile Iron Pipe and FittingsThe contract involves the supply of 12-inch Class 350 ductile iron pipe, Mega-Lugs, and associated fittings for use in reservoir inlet and distribution systems within the City of Glendora, California. The materials must meet stringent technical specifications to ensure durability, pressure resistance, and compatibility with existing infrastructure, with all components required to support safe, long-term water distribution operations. The scope encompasses not only the pipe and fittings but also the necessary hardware and installation-ready components to facilitate seamless integration into the city’s water network. Responses are due by August 20, 2026, at 5:00 PM, with the solicitation posted on July 28, 2026. This is classified as a subcontract under NAICS code 423720, indicating it falls within wholesale trade of construction materials. The place of performance is specifically tied to Glendora, with the project requiring delivery and readiness for installation at the designated site. All suppliers must be prepared to meet project timelines and quality standards without explicit set-aside provisions, and bids must be submitted via the provided online portal. The contracting authority remains the City of Glendora, which retains full oversight of material compliance and performance expectations.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

Construction Inspection and Quality Assurance ServicesThe City of Glendora is seeking qualified contractors to provide independent inspection and quality assurance quality control services for construction projects, ensuring compliance with all applicable city standards, approved drawings, and technical specifications. The scope of work involves continuous monitoring and verification throughout the construction phase to guarantee adherence to required protocols, identify deviations early, and maintain the integrity of the project. Services are expected to be performed on-site in Glendora, California, with a ZIP code of 91741, and must align strictly with municipal requirements. This subcontract opportunity is open for responses until August 20, 2026, at 5:00 PM, and is classified under NAICS code 541330, which corresponds to architectural, engineering, and related services. The solicitation is issued through BidAmerica, with the official link available for access to detailed submission guidelines. While no specific set-aside provisions or organizational restrictions are outlined, bidders must demonstrate proven experience in construction inspection and quality assurance, with a strong understanding of local regulatory frameworks and construction best practices. All proposals must confirm the capability to deliver reliable, real-time inspection reporting and maintain detailed documentation for audit and compliance purposes.

Engineering Services

POSTED

DEADLINE

Cathodic Protection System InstallationThe contract is for the installation of a cathodic protection system using magnesium sacrificial anodes to safeguard metal components in contact with water within the reservoir located in Glendora, California, with a zip code of 91741. This work is classified under NAICS code 238210, indicating it pertains to plumbing, heating, and air-conditioning contracting services, and is structured as a subcontract opportunity. The solicitation was posted on July 28, 2026, and responses are due by 5:00 PM on August 20, 2026. The awarding entity is the City of Glendora under the state of California, and while the full office address and point of contact details are not provided, the place of performance is clearly defined as Glendora. The project’s purpose is to prevent corrosion in infrastructure components exposed to water, ensuring long-term structural integrity and operational reliability of the reservoir system.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Ventilation System InstallationThe City of Glendora has issued a subcontract for the installation of mechanical ventilation systems within an enclosed reservoir structure to ensure proper air quality and safety standards are maintained. The work pertains specifically to the design and implementation of systems that will regulate airflow, control humidity, and mitigate potential hazards in the confined space, with performance required at the Glendora location with ZIP code 91741. The solicitation is classified under NAICS code 238220, which corresponds to plumbing, heating, and air-conditioning contractors, indicating the specialized nature of the required technical expertise. The contract was posted on July 28, 2026, with responses due by August 20, 2026, at 5:00 PM Pacific Time, leaving a limited window for qualified subcontractors to prepare and submit proposals. Interested parties must access the official bidding platform via the provided link to obtain full details, as no additional point of contact or set-aside information has been provided.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Valve and Actuation System InstallationThe contract involves the supply and installation of valves, actuators, and control systems for the inlet and outlet of a reservoir located in Glendora, California, with a required integration of electrical components with mechanical systems to ensure synchronized and reliable operation. The work scope encompasses the delivery, setup, and commissioning of all necessary equipment to achieve precise flow control and automated monitoring, ensuring compliance with operational standards for water management infrastructure. This subcontract is open for bidding with a response deadline of August 20, 2026, under NAICS code 238220 for plumbing, heating, and air-conditioning contractors, and the performance location is specifically tied to the City of Glendora’s water facility with a zip code of 91741. All parties must adhere to technical specifications for seamless interoperability between control systems and mechanical components, and the project is administered by the City of Glendora under the State of California.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Reservoir Inlet Piping InstallationThe contract entails the installation of 12-inch Class 350 CMIL&C ductile iron pipe along with associated mechanical systems for the reservoir inlet, strictly in accordance with engineering drawings DWG M-1 and M-5. The work is scoped to ensure proper integration of piping and mechanical components to meet functional and safety standards for reservoir inflow operations. All materials and installation methods must comply with the specified class rating and engineering specifications to guarantee long-term durability and performance under operational pressures. The contract is classified as a subcontract under NAICS code 238210 and is issued by the City of Glendora in California, with the place of performance located in Glendora, zip code 91741. The solicitation was posted on July 28, 2026, with a response deadline of August 20, 2026, at 5:00 PM. Interested parties must submit proposals through the designated online portal at the provided UI link, and all work must be executed in compliance with local regulations and the technical requirements outlined in the referenced drawings.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Construction Management And Inspection Services For North Glendora Reservoir Project

Solicitation # 20260727029

The City of Glendora, California, is seeking qualified firms to provide construction management and inspection services for the North Glendora Reservoir Project, solicited under bid number 1368, 10285386 with a contract value of $16. The opportunity is classified under NAICS code 237110 for Water and Sewer Line and Related Structures Construction and is issued as a SLED government solicitation with no specific set-aside. The solicitation was posted on July 28, 2026, with responses due by August 20, 2026, at 5:00 PM Pacific Time. Work is to be performed in Glendora, CA, with a zip code of 91741. Primary points of contact for inquiries include William Wittkopf, Senior Project Manager at BK&F, reachable at william.wittkopf@bkf.com, and Valerie Velasquez-Santoya, Assistant Public Works Director, reachable at vvelasquez@cityofglendora.gov. All bids must be submitted through the official BidAmerica platform using the provided UI link.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE